数码视讯Q7的刷机-USB迷|专注于互联网分享

2023年12月16日发(作者：仝丝萝)

45[info]success46BULKcmd[disk_initial 1] Amlogic multi-dtb tool47 Multi dtb detected48 Multi dtb tool version: v2 .49 Support 4 dtbs.50 aml_dt soc: gxl platform: p211 variant: 1g dtb 0 soc: gxbb plat: p201 vari: 1g51 dtb 1 soc: gxbb plat: p201 vari: 2g52 dtb 2 soc: gxl plat: p211 vari: 1g53 dtb 3 soc: gxl plat: p211 vari: 2g54 Find match dtb: 2start dts,buffer=0000,dt_addr=180055parts: 145600: logo 0000 15701: recovery 0000 15802: rsv 0000 15903: tee

0000 16004: crypt

0000 105: misc 0000 16106: instaboot 0000 16207: boot 0000 16308: system 0000 16409: cache 0000 26510: ghost 0000 411: info 0000 46612: params 0000 26713: data ffffffffffffffff 468emmc/sd

response timeout, cmd = 869emmc/sd

response timeout, cmd = 5570emmc/sd

response timeout, cmd = 171EMMC init failed72boot_device_flag : 1Nand PHY Ver:1.01.001.0006 (c) 2013 Amlogic Inc.73init bus_cycle=6, bus_timing=8, system=5.0ns74NAND device id: 2c 64 44 4b a9 0 0 075detect NAND device: B revision NAND 8GiB MT29F64G08CBABA76XXXXXXX======enter NAND boot======XXXXXX77

boot_device_flag : 178Nand PHY Ver:1.01.001.0006 (c) 2013 Amlogic Inc.79init bus_cycle=6, bus_timing=8, system=5.0ns80NAND device id: 2c 64 44 4b a9 0 0 081detect NAND device: B revision NAND 8GiB MT29F64G08CBABAnew oob mode82bus_c=6,bus_t=8,sys=4.0ns,T_REA=16,T_RHOH=1583show_phydev_list840: nfboot85detect new nand here and new_type:5086NAND CKECK:arg nbbt: valid=1, blk=5, page=0NAND CKECK:arg fbbt: valid=1, blk=6, page=087outside dtb: ec69a088NAND CKECK:arg ndtb: valid=1, blk=7, page=3389amlnf_detect_dtb_partitions:dtb_erase_blk:790NAND CKECK:arg nkey: valid=1, blk=10, page=0start_blk =0,total_blk=409691nand erasing 0 % --10 % complete92protect nand_bbt info at blk 593chipenv block skipping0x594protect fbbt at blk 6chipenv block skipping0x695protect nand_key info at blk 1096chipenv block skipping0xa97bad block skipping0x5a98bad block skipping0x5bnand erasing 10 % --20 % complete99nand erasing 20 % --30 % complete100nand erasing 30 % --40 % complete101nand erasing 40 % --50 % complete102nand erasing 50 % --60 % complete103nand erasing 60 % --70 % completenand erasing 70 % --80 % complete104nand erasing 80 % --90 % complete105nand erasing 90 % --100 % complete106nandphy_init failed and ret=0xffffffff107nand_init failed ret:1command: amlnf init 1 <- 3108

113detect NAND device: B revision NAND 8GiB MT29F64G08CBABA114new oob modebus_c=6,bus_t=8,sys=4.0ns,T_REA=16,T_RHOH=15115show_phydev_list1160: nfboot117detect new nand here and new_type:50118NAND CKECK:arg nbbt: valid=1, blk=5, page=0NAND CKECK:arg fbbt: valid=1, blk=6, page=0119outside dtb: ec69a0120NAND CKECK:arg ndtb: valid=0, blk=0, page=0121found NO arg : ndtb info122amlnf_detect_dtb_partitions:dtb_erase_blk:-1NAND CKECK:arg ncnf: valid=0, blk=0, page=0123found NO arg : ncnf info124aml_key_init probe.125NAND CKECK:arg nkey: valid=1, blk=10, page=0126nand dtb: probe.127NAND CKECK:arg ndtb: valid=0, blk=0, page=0found NO arg : ndtb info128boot_device_flag 1129NAND CKECK:arg nenv: valid=0, blk=0, page=0130found NO arg : nenv info131bbt_valid_ops: do

nothing!132amlnand_get_dev_configs() 4104partition-> partiton_num 2133partition-> partiton_num 9134partition-> partiton_num 3135amlnand_save_info_by_name(), 1155136name ncnf, size:3248amlnand_save_info_by_name, 1221: new blk 4137nfboot : 0x-0x :partn=0:single_chip single_plane138nfcache : 0x-0x :partn=2:single_chip multi_plane139nfcode : 0x00002f800000-0x00005c800000 :partn=9:single_chip multi_plane140nfdata : 0x00008c000000-0x :partn=3:single_chip multi_plane(nfboot) bad blks 0141(nfcache) bad blks 0142(nfcode) bad blks 0143(nfdata) bad blks 0144amlnf_logic_init() start(nfcache), size:29000000145nftl version 1.01.001146size_in_blk 164; total_block 163;147nftl start: size 163, free

19148-blks(163), total_blocks(144)149all block full!!150current block: 163 (nfcode), size:5c800000151nftl version 1.01.001152nftl start: size 370, free

38153-blks(370), total_blocks(332)154all block full!!155current block: 369 (nfdata), size:6nftl version 1.01.001157nftl start: size 1488, free

139158-blks(1488), total_blocks(1349)159all block full!!160current block: 1487 amlnf_logic_init() done161dtb erase Okay162[store]To run cmd[amlnf dtb_write 0x0000 0x40000]163cmd dtb_write:164amlnf_dtb_save: ####amlnand_save_info_by_name(), 1155165name ndtb, size:262144166amlnand_save_info_by_name, 1221: new blk 7167262144 bytes dtd_write : OK168[MSG]usb producing env_relocate169uboot env

amlnf_env_read : ####170uboot env

arg_valid = 0 invalid,amlnf_env_read171*** Warning - bad CRC, using default environment

172Saving Environment 173uboot env

amlnf_env_save : ####174amlnand_save_info_by_name(), 1155175name nenv, size:65536176amlnand_save_info_by_name, 1221: new blk 8177 Amlogic multi-dtb tool Multi dtb detected178 Multi dtb tool version: v2 .179 Support 4 dtbs.180 aml_dt soc: gxl platform: p211 variant: 1g