魅族pro5刷国际版固件教程中英文版-USB迷|专注于互联网分享

2024年2月15日发(作者：战兰娜)

魅族pro5刷国际版固件教程中英文版

METHOD 1: INSTALLATION THROUGH ADB VIA PC

第一种方法:连接通过电脑刷

旅游无疆界 hb1987628

–Required before using ADB

command to install

1. Rooted device (note: you need a Flyme account for this). 一:先root

, Enable root by tapping on Settings-> Accounts-> My Flyme->

Personal settings (first option) -> System privileges and set it to

open - accept disclaimer and confirm.*

2. Busybox (SuperSU should be possible too) installed.*

二:安装busybox

, You can download and install busybox from Google Play (or

search for the .apk file yourself).

Note: make sure it is installed successfully.

3. Setting up phone

3:安装ADB驱动～(连接过电脑的可以忽略)

, 3.1 Set your device on „connect as Built-in CD-ROM? (settings-

>about phone->storage->connect as).

, 3.2 Connect the phone to your PC and copy the „„USB Drivers??

folder from your phone to your desktop.

, 3.3 Go to settings->accessibility->developer options and

enable „„debugging?? and mock locations.

4. Install ADB drivers

四:无视

, 4.1 Open Windows Device Management (search:

). You?ll see a yellow exclamation mark at

„„Androidphone/ADB interface?? - right click on it and click

update driver. Click browse my computer for driver software

(2nd option) and then click on browse and locate the driver

folder you copied from your Meizu phone to your computer (at

step 3.2). If it installs your good to go to pre-install if not go

step 4.2.

, 4.2 [Optional] When trying to manually install the drivers

Windows could give a error like „„the driver is corrupt or has

been tampered?? If this is the case you?ll need to Disable Driver

Signature Verification.

How to: (1) Hold down the SHIFT key while you click Restart.

(2) Once rebooted click the Troubleshoot option. (3) Click

Advanced options. (4) Click Startup Settings. (5) Click Restart.

(6) Now Disable „„driver signature enforcement?? by pressing F7

(7th option in the list). (7) Now you?ll be able to install the

driver

- at step 4.1 - without an error.

前面是准备工作～基本就是root和安装

busybox

-Now you can start the pre- installation procedure

1.下载ADB文件夹

1. Download ADB (files) folder click to download ADB files

, Download (see link above) and unzip the folder.

2. Setting up .android folder

2设置.android文件夹如下图～

新建adb_ 里面的内容为0x2a45，注意后缀名为

ini

, Go to „„c:Usersyour nameandroid?? and create or edit the

„„adb_?? file in this folder. Create it by making a txt file

and

name it to adb_ (don?t forget to replace .txt by .ini). Open

the adb_ file with notepad for example and add the

following text in it: 0x2a45

Note: If there is no .android folder, run the commands in step 3

and search again, also check ADB-drivers.

3. Checking driver and connection

3.现在检查驱动和连接，

打开文件夹～打开运行

打开cmd运行框后输入adb kill-server 然后回车(Enter键，键盘里

最大的键)

然后再输入adb devices 回车，

如图

, Start ADB shell by clicking the .bat file in the downloaded and

unzipped adb folder. (运行 means run)

, In the just started ADB shell run (type) the following 2

commands:

adb kill-server

adb devices

After the 2 commands mentioned above you should see your device

below ‘‘list of devices attached’’.

Note: [Important] If the device list is empty it does not recognize

your device and you should check: if you installed your drivers

correctly, if the .android file exists and if it contains the

adb_ file with 0x2a45 in it. If you sure you did - try rebooting

your PC or kill the process - and connect/reconnect your device

again - and run (type) the command again. If you’re getting a

''Permission denied" error make sure you have busybox or SU correctly

installed and that you did all the other required steps (root,

debugging,mock).

-The Installation through ADB

这里的123步都是制作提取国际版固

件～就不做解释～我直接发我提取的

国际版455i 大小为1.28G

1. Download the correct and desired international (i) ROM/firmware

() for your device

, Download from

, Download from:

2. Now download and use the (firmware) converter that

creates the required

, Click to download converter and unpack the

Converter_system_Lollipop folder to your PC.

, Copy the files „„?? and from

the to the „„in?? folder of converter.

, If you copied the two above files to „„in?? start the process by

clicking on

, When completed you should have the required image in the

„„out?? (you?ll need it for updating).

4. Now copy the created image from the ‘‘out’’ folder to the

root of your device.

把从百度云下载的或自己提取的系统放在手机的根目录

, Copy it to internal system memory of your device

ADB by clicking the (运行) file in the ADB folder and

type the following 3 commands.

现在又回到刚才的cmd框～关掉的话直接打开就行～

, 输入adb shell 回车

, su 回车

, dd if=/sdcard/ of=/dev/block/platform/ mtk-msdc.0/by-

name/system 回车

, 如图

, adb shell

, su

, dd if=/sdcard/ of=/dev/block/platform/XXXXXXX/by-

name/system

IMPORTANT: Replace **XXXXXXX **with the correct partition

system for your device

MX4 Pro = 0

M2 note = mtk-msdc.0

MX4 = mtk-msdc.0 (OR mmcblk0p6)

MX5 = mtk-msdc.0 (OR mmcblk0p18)

So for the MX4, for example, your command will be: dd

if=/sdcard/ of=/dev/block/platform/mtk-msdc.0/by-

name/system

这里只有说一点~就是最后的那个命令行如果是PRO5的话应为

dd if=/sdcard/ of=/dev/block/platform//by-name/system

Note: After giving the „„su?? command your smartphone may ask for

confirmation tap allow/confirm on your screen.

输完dd if 那一行后看似手机什么都没搞～ (如果卡顿也是正常)大约5分

钟左右出现“#” 就说明已经成功了，好，现在重启手机，手机会出现优化程

序，大功告成～

6. The installation command will take some time (? 5min)

, After it is done you?ll see some records in and out and at the

very end the following sign: „#?;. If this is the case it is done.

总结:最好是先刷455A版本

最简洁步骤就是，1 root2安装busybox3把放在手机根目录，4输

入三行命令，好结束祝大家都成功

phone should be updated by now, but your device will be

unresponsive, this is normal.

, Hold the power button for 5-10 seconds to shut it down. Now

start it up again and wait for it to update apps etc. and your

phone has updated successfully. However, once in Flyme

again it is wise - but not*necessary - to completely reset your

phone. Go to settings->about phone->memory->factory data

reset-> check both boxes and click start cleaning (this could

take 5-10minutes [Note: this deletes everything!!!]

Note: if the booting - after flashing/updating - takes longer than

15 minutes go to recovery and factory reset it and try again (boot with

volume down button + power button to access recovery). END OF METHOD 1

METHOD 2: INSTALLATION THROUGH THE TERMINAL

第二种方法就不介绍了自己看看吧

1. Enable root

, Enable root by tapping on Settings-> Accounts-> My Flyme->

Personal settings (first option) -> System privileges and set it to

open - accept disclaimer and confirm.

2. Download and successfully install Busybox (from Google Play or

search .apk)

3. Download and install a Terminal Emulator (from Google Play or

search .for an apk)

4. Download the correct and desired international (i) ROM/firmware

() for your device

, Download from

, Download from:

5. Download and use the (firmware) converter that creates

the required

, Click here to download converter first

, Copy and (from the

) to the folder “in” (see converter folder)

, Then start the converting process by starting System-

and pressing option 1 [enter]

, If successfully converted you can find the in the

„„out?? folder.

6. Copy the converted system-img from ‘‘out’’ to the internal

memory of your Meizu device

7 Go to Settings-> Display-> Sleep and set it to at least 10 minutes

8. Start the Terminal Emulator and run (type) the super user command

, su

, A permission popup will come; give permission by tapping

allow (always allow).

9. Now run (type) the command for installing the system-img.

, dd if=/sdcard/ of=/dev/block/platform/XXXXXXX/by-

name/system

, Replace XXXXXXX with the correct partition system for your

device

MX4 Pro = 0

M2 note = mtk-msdc.0

MX4 = mtk-msdc.0 (OR mmcblk0p6)

MX5 = mtk-msdc.0 (OR mmcblk0p18)

Example Mx5 : dd if=/sdcard/

of=/dev/block/platform/mtk-msdc.0/by-name/system 10. The

installation should start after the ‘‘dd if’’ command, but please

note…

, …it may seem that the copying/process did NOT start because

you didn?t notice it, but it DID start.

, do NOT type a new command or whatsoever, just…

, …be patient and give your device 5-10 minutes to process. 11.

When the process is done you’ll see a # at the very end

, your device should be unresponsive by now - this is normal

12 Now just shutdown your phone (hold power button) and reboot it

13 Once successfully booted your device should be running an i-rom

, Once in Flyme again it is wise - but not necessary - to

completely reset your phone. Go to settings->about phone-

>memory->factory data reset-> check both boxes and click

start cleaning (this could take 5-10minutes [Note: this deletes

everything!!!]

END OF METHOD 2

Alternative/separate download links

, to image Converter tool (only for lollipop roms)

, Folder with ADB Shell (files)

, Busybox app playstore link

, Meizu MX4 system-img. (4.2.8.2I)

Answers to some questions and errors

, Q: I?m getting a „„permission denied?? error.

Make sure you have root and that busybox is installed. Also

make sure you gave the su command and that you tapped

allow permission on your screen.

, Q: I?m getting a : no such file or directory error

Make sure you gave the correct install command. The ‘’ dd

if’'command has to be EXACTLY the same as given. Also the

should be in the root of (internal memory) your

device). Mind spaces dots etc.

, Q: Can I update to a newer rom via OTA (upgrade app).

NO, you cannot. You have to flash via this method again.

, Q How can I revert back to an A,C,U rom?

Download the desired rom, copy the to your device

and install/update via the stock recovery.

Note: boot with volume down button + power button to access

recovery. Besides, I advise you to do a full factory reset after

downgrading.

Sources

install-rom-international-devices-t3174496

, ;id=18 (Russian)

, ;showtopic=673310&view=fi

ndpost&p=41940840 (Russian)

cook-all-meizu.2498074/ (Vietnamese)

Credits to all of them