2024年2月25日发(作者：堂春燕)

Code2004LevelWARNWARNMessage KeyGPI_PIN_CONFLICTSGPI_PIN_OUT_OF_RENGEMessage (English)Some GPI Trigger pins are as GPI Trigger is set to not communicate with not communicate with PC_UNREACHABLEWARNECNA_UNREACHABLERunning on UPS battery. The System willshutdown soon.2005ERRORUPS_ON_BATT2S132031ERRORUPS_LOW_BATTERYWARNUPS_TEMPERATURE_WARNERRORUPS_TEMPERATURE_ERRORWARNWARNWARNTIME_DRIFTTIME_ASYNCThe battery is y temperature level exceeds {0} °y temperature level exceeds {0} ° difference between SMS Server andIMB is now {0} difference between SMS Server andIMB is out of _DISKUSAGE_THRESHOLD_Disk usage on {0} file system exceeds{1}%.EXCEEDEDFailed to get the usage from device ET_DISKUSAGE_FAILED''{0}'' was HOW_INTERRUPTEDERRORSHOW_ERRORWARNWARNWARNWARNWARNWARN''{0}'' was interrupted by an errorduring the playout2D_FUNCTION_WHILE_3D_MOThere is a mismatch between systemconfiguration and projector 3D_FUNCTION_WHILE_2D_MOThere is a mismatch between systemconfiguration and projector SHOW_HAS3D_SYSTEM_IThe next scheduled show has 3D content.N2DThe next scheduled 3D show does notALERTMSG_NEXT3DSHOW_NO3contain a 3D function change commandDFUNCTIONbefore the first LED_SHOW_UNPLAYABThe show ''{0}'' is not playable on {1}.LEKDM for CPL ''{0}'' is expiring in {1}KDM_ system is in emergency client appears to have have problemsynchronizing with {0}{0}：NTP ServerのIPAddressSystem needs to reboot in order tomaintain speed decreases than anassumption. The show may be MERGENCY_STATEWARNWARNWARNNTPSYNC_FAILMB_REBOOT_FAILEDPWI_ALERTIngest is not enough. The show isThe enclosure temperature is URE_ENCLOSURE__ERRORThe disagreement of a system version hasWARNSYS_VER_WI_EMERGENCY2032WARNUPS_LINE_FAILCommunication lost with the UPS.

20332034WARNUPS_TYPE_MISMATCHMismatched type betweenconfiguration and UPS system is in projector emergencystate. The projector is not in Lamp Onstate, or communication error rebuilding requiredRAID errorAn error occurred in memory 2. (in serverunit)Battery{0} defect. (in server unit)All battery defect. (in server unit)A warning occurred in power unit {0}. (inserver unit)An error occurred in power unit {0}. (inserver unit)An error occurred in all power unit. (inserver unit)A warning occurred in fan unit {0}. (inserver unit)An error occurred in fan unitWARNPRJ_EMERGENCY_STATE3001WARN3002ERROR3004ERROR3005WARN3006ERROR3007WARN3008ERROR3009ERROR3010WARN3011ERROR3012WARN3013ERRORA warning occurred in SSDAn error occurred in SSDProjector not connected3014WARNPCIe cable not connected3015WARNAn emergency error occurred duringCPL"{0}" playback3016ERRORM103017ERROR3018ERROR3019ERROR3020ERROR3021WARNVideo device unavailable. (in IMB unit)Audio device unavailable. (in IMB unit)Video FM unavailable. (in IMB unit)Audio FM unavailable. (in IMB unit)Battery defect. (in IMB unit)###ERROR1234ERRORERRORERRORERRORPW_MAIN_SY12PW_MAIN_SY26PW_MAIN_SY7-1PW_MAIN_SY7-2Security authentication failed.(in IMB unit)Malfunction (in PRJ Power supply)

567897282936373839464748495ERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORWARNWARNWARNWARNWARNWARNWARNWARNWARNERRORERRORERRORERRORERRORERRORERRORPW_MAIN_FE3.3PW_MAIN_FE2.5PW_MAIN_FE1.8PW_MAIN_FE1.2MXPW_MAIN_FE1.0MXPW_MAIN_FE1.2INPW_MAIN_FE1.5DCPW_MAIN_FE1.2DCPW_MAIN_FE1.0DCPW_MAIN_FE1.5S1PW_MAIN_FE1.5S2PW_MAIN_FE1.2HDPW_MAIN_FE12PW_MAIN_LPDPN_BPW_MAIN_LPDPN_GPW_MAIN_LPDPN_RPW_MAIN_LPDP0_BPW_MAIN_LPDP1_BPW_MAIN_LPDP0_GPW_MAIN_LPDP1_GPW_MAIN_LPDP0_RPW_MAIN_LPDP1_RPW_MAIN_LPD1.2CPW_MAIN_LPD3.0CPW_MAIN_LPD26PW_MAIN_LPD12PW_MAIN_LPD3.3PW_MAIN_LPD3.3P1PW_MAIN_LPD3.3P0PW_MAIN_LPD1.0R1PW_MAIN_LPD1.0R2PW_MAIN_LPD1.8R1PW_MAIN_LPD1.8R2PW_MAIN_LPD2.5RPW_MAIN_LPD3.3RPW_MAIN_STACKPW_MAIN_OPTIONPW_BLK_MAINPW_BLK_LMP_A1PW_BLK_LMP_A2PW_BLK_LMP_A3PW_BLK_LMP_B1PW_BLK_LMP_B2PW_BLK_LMP_B3PW_BLK_PFC_1PW_BLK_PFC_2PW_BLK_PFC_3PW_BLK_PFC_ALLDET_BOARD_FEDET_BOARD_LEDDET_BOARD_CCMDET_BOARD_LPDDET_BOARD_IFDET_BOARD_CTDisconnection (in PRJ Circuit board)

106ERRORDET_PEL_RDisconnection (in PRJ Peltier device)107ERRORDET_PEL_G108ERRORDET_PEL_B22224225226227228229234235236237238WARNERRORWARNWARNWARNERRORERRORERRORWARNERRORWARNWARNWARNWARNWARNWARNERRORERRORERRORERRORERRORERRORWARNWARNWARNWARNWARNWARNERRORERRORERRORERRORERRORERRORWARNERRORWARNERRORWARNTMP_AIR_1TMP_AIR_2TMP_PNL_R_1TMP_PNL_G_1TMP_PNL_B_1TMP_PNL_R_2TMP_PNL_G_2TMP_PNL_B_2TMP_OPT_1TMP_OPT_2TMP_LMP_A1_1TMP_LMP_A2_1TMP_LMP_A3_1TMP_LMP_B1_1TMP_LMP_B2_1TMP_LMP_B3_1TMP_LMP_A1_2TMP_LMP_A2_2TMP_LMP_A3_2TMP_LMP_B1_2TMP_LMP_B2_2TMP_LMP_B3_2TMP_LMPPW_A1_1TMP_LMPPW_A2_1TMP_LMPPW_A3_1TMP_LMPPW_B1_1TMP_LMPPW_B2_1TMP_LMPPW_B3_1TMP_LMPPW_A1_2TMP_LMPPW_A2_2TMP_LMPPW_A3_2TMP_LMPPW_B1_2TMP_LMPPW_B2_2TMP_LMPPW_B3_2TMP_IMB_1TMP_IMB_2TMP_IMBDEC_1TMP_IMBDEC_2TMP_PFC_1_1Exceeded the upper limit (in PRJTemperature control)

239244245246247248249WARNWARNERRORERRORERRORWARNERRORWARNERRORERRORERRORTMP_PFC_2_1TMP_PFC_3_1TMP_PFC_1_2TMP_PFC_2_2TMP_PFC_3_2TMP_PWUNIT_1TMP_PWUNIT_2TMP_FE_1TMP_FE_2TMP_BUILT-IN_ATMP_BUILT-IN_BACT_FAN_PWBACT_FAN_FEACT_FAN_PFC1ACT_FAN_PFC2ACT_FAN_PFC3ACT_FAN_PNL_R1ACT_FAN_PNL_R2ACT_FAN_PNL_GACT_FAN_PNL_BACT_FAN_UVACT_FAN_PSACT_FAN_LMP_A1ACT_FAN_LMP_A2ACT_FAN_LMP_A3ACT_FAN_LMP_B1ACT_FAN_LMP_B2ACT_FAN_LMP_B3ACT_FAN_LMPPOW1ACT_FAN_LMPPOW2ACT_FAN_LMPPOW3ACT_FAN_POWUNT1ACT_FAN_POWUNT2ACT_COM_AERO_04ACT_COM_AERO_05ACT_COM_AERO_06ACT_COM_AERO_10ACT_COM_AERO_11ACT_COM_AERO_12ACT_COM_AERO_13ACT_COM_AERO_14ACT_COM_AERO_15ACT_COM_AERO_18ACT_COM_AERO_24ACT_COM_AERO_25ACT_COM_AERO_26ACT_COM_AERO_28ACT_COM_AERO_29ACT_COM_AERO_2AACT_COM_AERO_2BACT_COM_AERO_2CACT_COM_AERO_30Communication Error (in PRJ internalcommunication)Malfunction (in PRJ Exhost system)1000WARN1001WARN1002WARN1003WARN1004WARN1005ERRORR5151006ERROR1007ERROR1008ERROR1009ERROR1010ERROR1011ERROR1012ERROR1013ERROR1014ERROR1015ERROR1016ERROR1017WARN1018WARN1019WARN1020WARN1021WARN1022WARN1023WARN1024WARN1025WARN1026WARN1027WARN1028WARN1029WARN1030WARN1031WARN1032WARN1033WARN1034WARN1035WARN1036WARN1037WARN1038WARN1039WARN1040WARN

1041WARN1042WARN1043WARN1044WARN1045WARN1046WARN1047WARN1048WARN1049WARN1050WARN1051WARN1052WARN1053WARN1054WARN1055WARN1056WARN1057WARN1058WARN1059WARN1060WARN1061WARN1062WARN1063WARN1064WARN1065WARN1066WARN1067WARN1068WARN1069WARN1070WARN1071WARN1072WARN1073WARN1074WARN1075WARN1076WARN1077WARN1078WARN1079WARN1080ERROR1081ERROR1082WARN1083WARN1084WARN1085WARN1086WARN1090WARNACT_COM_AERO_32ACT_COM_AERO_33ACT_COM_AERO_34ACT_COM_AERO_36ACT_COM_AERO_37ACT_COM_AERO_38ACT_COM_AERO_39ACT_COM_AERO_3AACT_COM_AERO_44ACT_COM_AERO_45ACT_COM_AERO_48ACT_COM_AERO_49ACT_COM_AERO_4AACT_COM_AERO_4BACT_COM_AERO_4CACT_COM_AERO_4DACT_COM_AERO_50ACT_COM_AERO_52ACT_COM_AERO_A4ACT_COM_AERO_A8ACT_COM_AERO_B0ACT_COM_LMPPW_A1ACT_COM_LMPPW_A2ACT_COM_LMPPW_A3ACT_COM_LMPPW_B1ACT_COM_LMPPW_B2ACT_COM_LMPPW_B3ACT_LMP_START_A1ACT_LMP_START_A2ACT_LMP_START_A3ACT_LMP_START_B1ACT_LMP_START_B2ACT_LMP_START_B3ACT_LMP_OFF_A1ACT_LMP_OFF_A2ACT_LMP_OFF_A3ACT_LMP_OFF_B1ACT_LMP_OFF_B2ACT_LMP_OFF_B3ACT_LMP_ALLACT_LMP_POWOUTACT_LENS_Z_INITACT_LENS_Z_AUTOACT_LENS_F_AUTOACT_LENS_Z_ADJACT_LENS_F_ADJACT_LUM_SENS_COMFailed to measure the brightness. (in PRJOptical system)Failed to initialize. (in PRJ Opticalsystem)Failed to control zoom lens. (in PRJOptical system)Failed to control focusing. (in PRJOptical system)Fainted (in PRJ Lamp)Ignition Error (in PRJ Lamp)300ERRORO_INST_CHI_FAN1301WARNO_INST_CHI_FAN2302ERRORO_INST_LMPDOR1The amount of exhaust air errorAjar lamp door. (in PRJ Cabinet)

303ERRORO_INST_LMPDOR23316317ERRORERRORERRORERRORERRORERRORERRORERRORINFOWARNWARNWARNINFOINFOO_GPIO_INTERLOCKO_LMPINFO_TYPEO_LMPINFO_DET_A1O_LMPINFO_DET_A2O_LMPINFO_DET_A3O_LMPINFO_DET_B1O_LMPINFO_DET_B2O_LMPINFO_DET_B3O_SW_LMPOFFO_MEM_LENSO_MEM_OPTICALO_MEM_OPTIONO_LUM_LUM_LIM+O_LUM_LUM_LIM-Exceeded the position limits. (in PRJbrightness control)Communication Error (in PRJ memory)Interlocking. (in PRJ Cabinet)Communication Error (in PRJ Lamp memory)3225326327328339344333334335336337338WARNWARNWARNWARNWARNWARNWARNWARNERRORERRORWARNERRORERRORERRORWARNWARNWARNWARNWARNWARNO_TIMER_LMP_A1O_TIMER_LMP_A2O_TIMER_LMP_A3O_TIMER_LMP_B1O_TIMER_LMP_B2O_TIMER_LMP_B3O_TIMER_FILTERO_NS_RTC_BATO_SS_SELFTEST1O_SS_SELFTEST2O_SS_BATTERY1O_SS_BATTERY2O_SS_SECLOCKO_SS_CTUO_MEASURE_LMP_A1O_MEASURE_LMP_A2O_MEASURE_LMP_A3O_MEASURE_LMP_B1O_MEASURE_LMP_B2O_MEASURE_LMP_B3ACT_SHUT_DOUSERACT_SHUT_LUM1ACT_SHUT_LUM2Lamp replacement timeLamp replacement timeLamp replacement timeLamp replacement timeLamp replacement timeLamp replacement timeAir filter cleaning timeBattery low. (in PRJ real time clock)Security Error. (in Security Block)Communication Error. (in Security Block)Battery low. (in Security Block)Battery almost flat. (in Security Block)Security Lock Error. (in Security Block)Communication Error (in Security Block)Failed to measure the brightness. (in PRJOptical system)1087WARN1088WARN1089WARNDouser does not workLuminance shutter does not workLuminance shutter does not work

报警信息（中文）某些通用输入引脚冲突。通用输入引脚的设定超出阈值。LPC通讯连接失败。eCNA-10通讯连接失败。Solution (English)Check the configuration for GPI service -10 User: Set proper IP address andcheck eCNA-10 User: Reset the IP Addressfor the power source. If it is a poweroutage, wait until the power comes it is a temporary outage, start the power source. If blackout, wait until the source come back. Iftemporary surge, start the battery UPSCheck UPSUse proper time server.设备使用UPS供电，系统即将关闭。UPS电池即将耗尽。UPS电池温度超过“”度。UPS电池温度超过“”度。SMS与IMB之间的时间差为“”秒。SMS与IMB之间的时间不同步。“”文件系统占用磁盘空间超过“”%。获取设备A-B的用途失败。“”（播放）被中断。“（CLP）”由于某错误在放映中中断。3D模式下某2D功能不匹配。2D模式下某3D功能不匹配。2D模式下日程表中存在3D内容。Call the disk ServiceYou may resume the show by the Auditoriumscreen of status may resume the show by the Auditoriumscreen of status 3D function as Projector Type is 2D function as Projector Type is prepare 3D lens.日程表中下一个3D内容之前，未设置转换成3DSPL needs to have 3D command on top inorder to perform 3D shows.模式。日程表中“”不可播放。“”影片对应的KDM即将在xx小时后过期。系统正处于“紧急状态”。NTP协议与“”同步时间失败。系统需要重启来维持相容性/一致性。服务器向IMB输入速度过慢，放映有可能终止。输入数据不足，放映已经终止。外壳温度过高。系统版本不匹配。UPS连接失败。Make sure that DCPs and KDMs are l new KDM to extend the duration ofthe root cause before resettingemergency NTP server setting andcommunication the system buffer margin hits the buffer margin before for a while to see if thetemperature become softwares via the USB cable for the UPS.

UPS设备与系统配置不符。Check the configuration and the UPS.放映机处于紧急状态，但灯泡未点亮，或发生Reboot the system after current show isfinished, and resume the show by the了通讯错误。Auditorium screen of status tab to clearthe emergency state.磁盘阵列需要紧急修复。磁盘阵列错误。服务器单元内存2发生错误。服务器“”电池有缺陷。服务器所有电池故障。服务器电源警告。服务器电源错误。服务器所有电源错误。服务器某风扇警告。服务器某风扇错误。SSD发生报警。SSD发生错误。放映机连接失败。Perform rebuilding of RAID by insertingspare HDD to empty slot as soon t your local serviceContact your local serviceReplace the backup batteryContact your local serviceReplace the power supply unit {0}Replace the power supply unit {0}Replace all power supply unitReplace the fan unit {0} or Contact yourlocal service representative. CallserviceShutdown server unit and replace the fanunits or Contact your local servicerepresentative. Call serviceContact your local serviceContact your local serviceCheck ethernet connection between serverunit and on the projector projector switch off and on in caseIMB led is blinking in shutdown the system then checkPCIe cable connection between server unitand CPL"{0}" validation ingest this content again whenstatus is ise please contact your localservice t your local serviceContact your local serviceContact your local serviceContact your local serviceContact your local servicePCIe未连接。“”播放时发生紧急错误。IMB视频单元不可用。IMB音频单元不可用。IMB视频调频无法使用IMB音频调频无法使用IMB电池故障IMB安全认证失败放映机电源故障Please initialize security t your local servicerepresentative.

放映机电路板连接中断

放映机散热设备连接中断放映机“”温度过高Check air intake and volume of exhaust t your local servicerepresentative.

放映机排风系统故障Contact your local service放映机内部通讯错误Contact your local service

点灯错误Repower LampRepower Lamp once after turn it off.灯泡意外熄灭Repower ProjectorRepower Lamp once after turn it off.放映机光学系统初始化失败无法进行变焦调节无法进行聚焦调节Check any obstruction around the lens.亮度值测量失败排风量低于阈值灯门被打开Contact your local volume of exhaust volume of exhaust the lamp door.

Close the lamp door.放映机内部连锁触发放映机灯泡通讯错误External interlock is ent type of lamp is lamp type and install proper ncy switch has been pushed.放映机内存通讯错误Install proper l proper option board.放映机亮度调节超出位置范围No more brightness control is more brightness control is the lamp.灯泡达到使用寿命空气过滤网使用时间到期，需清理实时时钟电池电量低安全模块错误安全模块通讯错误安全模块电池电量低安全模块电池即将耗尽安全模块安全锁触发安全模块通讯错误亮度值测量失败Clean the air filterContact your local t your local service.遮光板无法工作亮度调节板无法工作Contact your local service.

解决办法（中文）1. 检查GPI触发器的针脚配置；2. 拨打索尼售后服务热线.拨打索尼售后服务热线.拨打索尼售后服务热线.使用eCNA-10 : 设置正确的IP地址并检查网络连接。未使用eCNA-10: 复位 eCNA-10 IP地址.检查电源，如果是停电请关机等待来电。将UPS电池充足电.检查UPS检查UPS检查UPS拨打索尼售后服务热线.及时清理磁盘空间，删除下线影片拨打索尼售后服务热线.拖动进度条至中断位置以恢复放映.拖动进度条至中断位置以恢复放映.当放映机类型是3D时，服务器应使用3D功能。当放映机类型是2D时，服务器应使用2D功能。请准备3D镜头。3D SPL在开始部分必须包含3D命令。检查影片和密钥正确导入。导入新的密钥以延长影片放映周期复位1状态前移除启动故障检查时间服务器配置及连接。手动重新启动系统PWI buffer margin hits bottom.检查缓存限度等待一会儿再确认温度是否恢复正常升级软件版本检查UPS的USB连接线

检查确认配置信息和UPS设备信息。当前放映结束后重启服务器，调整放映状态消除1状态。插入新盘，执行RAID重建联系NOC报修联系NOC报修更换备用电池联系NOC报修更换{0}电源更换{0}电源更换所有电源更换{0}风扇关闭服务器更换故障风扇更换 PU-135板上的SSD更换 PU-135板上的SSD检查投影机和服务器连接线，IMB红灯闪烁时关开投影机。关闭系统检查投影机和服务器的PCIe连接线检查 CPL"{0}" 可用状态或重新导入影片。IMB 未工作，检查 SSP板模块IMB 未工作，检查 SSP板模块IMB 未工作，检查 SSP板模块IMB 未工作，检查 SSP板模块更换备用电池对安全状态初始化检查SY-401、SU-165、LMP-18板

检查以下连接：peltie(Red) 和 DST-29 板DST-29板 和 CT-274板CT-274板 和 LPD-7 板检查以下连接：peltie(Green) 和 DST-29 板DST-29板 和 CT-274板CT-274板 和 LPD-7 板检查以下连接：peltie(Blue) 和 DST-29 板DST-29板 和 CT-274板CT-274板 和 LPD-7 板检查投影机风扇及放映间温度；检查抽风机工作是否正常。

检查风扇和SY-401主板检查SY-401主板

重新点灯重新启动放映机重新点灯检查镜头周围是否有障碍物检查SPF-16主板的光传感器检查抽风量检查抽风量关闭灯门

关闭灯门复位内部连锁检查灯泡型号，安装正确型号灯泡。1按键被触发安装正确镜头Call service.安装正确镜头No more brightness control is more brightness control is made.更换灯泡清洁空气过滤网更换电池更换CPU-450板更换CPU-450板上的SD卡更换电池更换电池更换CPU-450板更换CPU-450板检查SPF-16主板的光传感器 、CT-274板、LPD-7板

检查光闸、DST-29板、CT-274板和LPD-7板检查SY-401主板和调光器组件

2024年2月25日发(作者：堂春燕)

Code2004LevelWARNWARNMessage KeyGPI_PIN_CONFLICTSGPI_PIN_OUT_OF_RENGEMessage (English)Some GPI Trigger pins are as GPI Trigger is set to not communicate with not communicate with PC_UNREACHABLEWARNECNA_UNREACHABLERunning on UPS battery. The System willshutdown soon.2005ERRORUPS_ON_BATT2S132031ERRORUPS_LOW_BATTERYWARNUPS_TEMPERATURE_WARNERRORUPS_TEMPERATURE_ERRORWARNWARNWARNTIME_DRIFTTIME_ASYNCThe battery is y temperature level exceeds {0} °y temperature level exceeds {0} ° difference between SMS Server andIMB is now {0} difference between SMS Server andIMB is out of _DISKUSAGE_THRESHOLD_Disk usage on {0} file system exceeds{1}%.EXCEEDEDFailed to get the usage from device ET_DISKUSAGE_FAILED''{0}'' was HOW_INTERRUPTEDERRORSHOW_ERRORWARNWARNWARNWARNWARNWARN''{0}'' was interrupted by an errorduring the playout2D_FUNCTION_WHILE_3D_MOThere is a mismatch between systemconfiguration and projector 3D_FUNCTION_WHILE_2D_MOThere is a mismatch between systemconfiguration and projector SHOW_HAS3D_SYSTEM_IThe next scheduled show has 3D content.N2DThe next scheduled 3D show does notALERTMSG_NEXT3DSHOW_NO3contain a 3D function change commandDFUNCTIONbefore the first LED_SHOW_UNPLAYABThe show ''{0}'' is not playable on {1}.LEKDM for CPL ''{0}'' is expiring in {1}KDM_ system is in emergency client appears to have have problemsynchronizing with {0}{0}：NTP ServerのIPAddressSystem needs to reboot in order tomaintain speed decreases than anassumption. The show may be MERGENCY_STATEWARNWARNWARNNTPSYNC_FAILMB_REBOOT_FAILEDPWI_ALERTIngest is not enough. The show isThe enclosure temperature is URE_ENCLOSURE__ERRORThe disagreement of a system version hasWARNSYS_VER_WI_EMERGENCY2032WARNUPS_LINE_FAILCommunication lost with the UPS.

20332034WARNUPS_TYPE_MISMATCHMismatched type betweenconfiguration and UPS system is in projector emergencystate. The projector is not in Lamp Onstate, or communication error rebuilding requiredRAID errorAn error occurred in memory 2. (in serverunit)Battery{0} defect. (in server unit)All battery defect. (in server unit)A warning occurred in power unit {0}. (inserver unit)An error occurred in power unit {0}. (inserver unit)An error occurred in all power unit. (inserver unit)A warning occurred in fan unit {0}. (inserver unit)An error occurred in fan unitWARNPRJ_EMERGENCY_STATE3001WARN3002ERROR3004ERROR3005WARN3006ERROR3007WARN3008ERROR3009ERROR3010WARN3011ERROR3012WARN3013ERRORA warning occurred in SSDAn error occurred in SSDProjector not connected3014WARNPCIe cable not connected3015WARNAn emergency error occurred duringCPL"{0}" playback3016ERRORM103017ERROR3018ERROR3019ERROR3020ERROR3021WARNVideo device unavailable. (in IMB unit)Audio device unavailable. (in IMB unit)Video FM unavailable. (in IMB unit)Audio FM unavailable. (in IMB unit)Battery defect. (in IMB unit)###ERROR1234ERRORERRORERRORERRORPW_MAIN_SY12PW_MAIN_SY26PW_MAIN_SY7-1PW_MAIN_SY7-2Security authentication failed.(in IMB unit)Malfunction (in PRJ Power supply)

567897282936373839464748495ERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORWARNWARNWARNWARNWARNWARNWARNWARNWARNERRORERRORERRORERRORERRORERRORERRORPW_MAIN_FE3.3PW_MAIN_FE2.5PW_MAIN_FE1.8PW_MAIN_FE1.2MXPW_MAIN_FE1.0MXPW_MAIN_FE1.2INPW_MAIN_FE1.5DCPW_MAIN_FE1.2DCPW_MAIN_FE1.0DCPW_MAIN_FE1.5S1PW_MAIN_FE1.5S2PW_MAIN_FE1.2HDPW_MAIN_FE12PW_MAIN_LPDPN_BPW_MAIN_LPDPN_GPW_MAIN_LPDPN_RPW_MAIN_LPDP0_BPW_MAIN_LPDP1_BPW_MAIN_LPDP0_GPW_MAIN_LPDP1_GPW_MAIN_LPDP0_RPW_MAIN_LPDP1_RPW_MAIN_LPD1.2CPW_MAIN_LPD3.0CPW_MAIN_LPD26PW_MAIN_LPD12PW_MAIN_LPD3.3PW_MAIN_LPD3.3P1PW_MAIN_LPD3.3P0PW_MAIN_LPD1.0R1PW_MAIN_LPD1.0R2PW_MAIN_LPD1.8R1PW_MAIN_LPD1.8R2PW_MAIN_LPD2.5RPW_MAIN_LPD3.3RPW_MAIN_STACKPW_MAIN_OPTIONPW_BLK_MAINPW_BLK_LMP_A1PW_BLK_LMP_A2PW_BLK_LMP_A3PW_BLK_LMP_B1PW_BLK_LMP_B2PW_BLK_LMP_B3PW_BLK_PFC_1PW_BLK_PFC_2PW_BLK_PFC_3PW_BLK_PFC_ALLDET_BOARD_FEDET_BOARD_LEDDET_BOARD_CCMDET_BOARD_LPDDET_BOARD_IFDET_BOARD_CTDisconnection (in PRJ Circuit board)

106ERRORDET_PEL_RDisconnection (in PRJ Peltier device)107ERRORDET_PEL_G108ERRORDET_PEL_B22224225226227228229234235236237238WARNERRORWARNWARNWARNERRORERRORERRORWARNERRORWARNWARNWARNWARNWARNWARNERRORERRORERRORERRORERRORERRORWARNWARNWARNWARNWARNWARNERRORERRORERRORERRORERRORERRORWARNERRORWARNERRORWARNTMP_AIR_1TMP_AIR_2TMP_PNL_R_1TMP_PNL_G_1TMP_PNL_B_1TMP_PNL_R_2TMP_PNL_G_2TMP_PNL_B_2TMP_OPT_1TMP_OPT_2TMP_LMP_A1_1TMP_LMP_A2_1TMP_LMP_A3_1TMP_LMP_B1_1TMP_LMP_B2_1TMP_LMP_B3_1TMP_LMP_A1_2TMP_LMP_A2_2TMP_LMP_A3_2TMP_LMP_B1_2TMP_LMP_B2_2TMP_LMP_B3_2TMP_LMPPW_A1_1TMP_LMPPW_A2_1TMP_LMPPW_A3_1TMP_LMPPW_B1_1TMP_LMPPW_B2_1TMP_LMPPW_B3_1TMP_LMPPW_A1_2TMP_LMPPW_A2_2TMP_LMPPW_A3_2TMP_LMPPW_B1_2TMP_LMPPW_B2_2TMP_LMPPW_B3_2TMP_IMB_1TMP_IMB_2TMP_IMBDEC_1TMP_IMBDEC_2TMP_PFC_1_1Exceeded the upper limit (in PRJTemperature control)

239244245246247248249WARNWARNERRORERRORERRORWARNERRORWARNERRORERRORERRORTMP_PFC_2_1TMP_PFC_3_1TMP_PFC_1_2TMP_PFC_2_2TMP_PFC_3_2TMP_PWUNIT_1TMP_PWUNIT_2TMP_FE_1TMP_FE_2TMP_BUILT-IN_ATMP_BUILT-IN_BACT_FAN_PWBACT_FAN_FEACT_FAN_PFC1ACT_FAN_PFC2ACT_FAN_PFC3ACT_FAN_PNL_R1ACT_FAN_PNL_R2ACT_FAN_PNL_GACT_FAN_PNL_BACT_FAN_UVACT_FAN_PSACT_FAN_LMP_A1ACT_FAN_LMP_A2ACT_FAN_LMP_A3ACT_FAN_LMP_B1ACT_FAN_LMP_B2ACT_FAN_LMP_B3ACT_FAN_LMPPOW1ACT_FAN_LMPPOW2ACT_FAN_LMPPOW3ACT_FAN_POWUNT1ACT_FAN_POWUNT2ACT_COM_AERO_04ACT_COM_AERO_05ACT_COM_AERO_06ACT_COM_AERO_10ACT_COM_AERO_11ACT_COM_AERO_12ACT_COM_AERO_13ACT_COM_AERO_14ACT_COM_AERO_15ACT_COM_AERO_18ACT_COM_AERO_24ACT_COM_AERO_25ACT_COM_AERO_26ACT_COM_AERO_28ACT_COM_AERO_29ACT_COM_AERO_2AACT_COM_AERO_2BACT_COM_AERO_2CACT_COM_AERO_30Communication Error (in PRJ internalcommunication)Malfunction (in PRJ Exhost system)1000WARN1001WARN1002WARN1003WARN1004WARN1005ERRORR5151006ERROR1007ERROR1008ERROR1009ERROR1010ERROR1011ERROR1012ERROR1013ERROR1014ERROR1015ERROR1016ERROR1017WARN1018WARN1019WARN1020WARN1021WARN1022WARN1023WARN1024WARN1025WARN1026WARN1027WARN1028WARN1029WARN1030WARN1031WARN1032WARN1033WARN1034WARN1035WARN1036WARN1037WARN1038WARN1039WARN1040WARN

1041WARN1042WARN1043WARN1044WARN1045WARN1046WARN1047WARN1048WARN1049WARN1050WARN1051WARN1052WARN1053WARN1054WARN1055WARN1056WARN1057WARN1058WARN1059WARN1060WARN1061WARN1062WARN1063WARN1064WARN1065WARN1066WARN1067WARN1068WARN1069WARN1070WARN1071WARN1072WARN1073WARN1074WARN1075WARN1076WARN1077WARN1078WARN1079WARN1080ERROR1081ERROR1082WARN1083WARN1084WARN1085WARN1086WARN1090WARNACT_COM_AERO_32ACT_COM_AERO_33ACT_COM_AERO_34ACT_COM_AERO_36ACT_COM_AERO_37ACT_COM_AERO_38ACT_COM_AERO_39ACT_COM_AERO_3AACT_COM_AERO_44ACT_COM_AERO_45ACT_COM_AERO_48ACT_COM_AERO_49ACT_COM_AERO_4AACT_COM_AERO_4BACT_COM_AERO_4CACT_COM_AERO_4DACT_COM_AERO_50ACT_COM_AERO_52ACT_COM_AERO_A4ACT_COM_AERO_A8ACT_COM_AERO_B0ACT_COM_LMPPW_A1ACT_COM_LMPPW_A2ACT_COM_LMPPW_A3ACT_COM_LMPPW_B1ACT_COM_LMPPW_B2ACT_COM_LMPPW_B3ACT_LMP_START_A1ACT_LMP_START_A2ACT_LMP_START_A3ACT_LMP_START_B1ACT_LMP_START_B2ACT_LMP_START_B3ACT_LMP_OFF_A1ACT_LMP_OFF_A2ACT_LMP_OFF_A3ACT_LMP_OFF_B1ACT_LMP_OFF_B2ACT_LMP_OFF_B3ACT_LMP_ALLACT_LMP_POWOUTACT_LENS_Z_INITACT_LENS_Z_AUTOACT_LENS_F_AUTOACT_LENS_Z_ADJACT_LENS_F_ADJACT_LUM_SENS_COMFailed to measure the brightness. (in PRJOptical system)Failed to initialize. (in PRJ Opticalsystem)Failed to control zoom lens. (in PRJOptical system)Failed to control focusing. (in PRJOptical system)Fainted (in PRJ Lamp)Ignition Error (in PRJ Lamp)300ERRORO_INST_CHI_FAN1301WARNO_INST_CHI_FAN2302ERRORO_INST_LMPDOR1The amount of exhaust air errorAjar lamp door. (in PRJ Cabinet)

303ERRORO_INST_LMPDOR23316317ERRORERRORERRORERRORERRORERRORERRORERRORINFOWARNWARNWARNINFOINFOO_GPIO_INTERLOCKO_LMPINFO_TYPEO_LMPINFO_DET_A1O_LMPINFO_DET_A2O_LMPINFO_DET_A3O_LMPINFO_DET_B1O_LMPINFO_DET_B2O_LMPINFO_DET_B3O_SW_LMPOFFO_MEM_LENSO_MEM_OPTICALO_MEM_OPTIONO_LUM_LUM_LIM+O_LUM_LUM_LIM-Exceeded the position limits. (in PRJbrightness control)Communication Error (in PRJ memory)Interlocking. (in PRJ Cabinet)Communication Error (in PRJ Lamp memory)3225326327328339344333334335336337338WARNWARNWARNWARNWARNWARNWARNWARNERRORERRORWARNERRORERRORERRORWARNWARNWARNWARNWARNWARNO_TIMER_LMP_A1O_TIMER_LMP_A2O_TIMER_LMP_A3O_TIMER_LMP_B1O_TIMER_LMP_B2O_TIMER_LMP_B3O_TIMER_FILTERO_NS_RTC_BATO_SS_SELFTEST1O_SS_SELFTEST2O_SS_BATTERY1O_SS_BATTERY2O_SS_SECLOCKO_SS_CTUO_MEASURE_LMP_A1O_MEASURE_LMP_A2O_MEASURE_LMP_A3O_MEASURE_LMP_B1O_MEASURE_LMP_B2O_MEASURE_LMP_B3ACT_SHUT_DOUSERACT_SHUT_LUM1ACT_SHUT_LUM2Lamp replacement timeLamp replacement timeLamp replacement timeLamp replacement timeLamp replacement timeLamp replacement timeAir filter cleaning timeBattery low. (in PRJ real time clock)Security Error. (in Security Block)Communication Error. (in Security Block)Battery low. (in Security Block)Battery almost flat. (in Security Block)Security Lock Error. (in Security Block)Communication Error (in Security Block)Failed to measure the brightness. (in PRJOptical system)1087WARN1088WARN1089WARNDouser does not workLuminance shutter does not workLuminance shutter does not work

报警信息（中文）某些通用输入引脚冲突。通用输入引脚的设定超出阈值。LPC通讯连接失败。eCNA-10通讯连接失败。Solution (English)Check the configuration for GPI service -10 User: Set proper IP address andcheck eCNA-10 User: Reset the IP Addressfor the power source. If it is a poweroutage, wait until the power comes it is a temporary outage, start the power source. If blackout, wait until the source come back. Iftemporary surge, start the battery UPSCheck UPSUse proper time server.设备使用UPS供电，系统即将关闭。UPS电池即将耗尽。UPS电池温度超过“”度。UPS电池温度超过“”度。SMS与IMB之间的时间差为“”秒。SMS与IMB之间的时间不同步。“”文件系统占用磁盘空间超过“”%。获取设备A-B的用途失败。“”（播放）被中断。“（CLP）”由于某错误在放映中中断。3D模式下某2D功能不匹配。2D模式下某3D功能不匹配。2D模式下日程表中存在3D内容。Call the disk ServiceYou may resume the show by the Auditoriumscreen of status may resume the show by the Auditoriumscreen of status 3D function as Projector Type is 2D function as Projector Type is prepare 3D lens.日程表中下一个3D内容之前，未设置转换成3DSPL needs to have 3D command on top inorder to perform 3D shows.模式。日程表中“”不可播放。“”影片对应的KDM即将在xx小时后过期。系统正处于“紧急状态”。NTP协议与“”同步时间失败。系统需要重启来维持相容性/一致性。服务器向IMB输入速度过慢，放映有可能终止。输入数据不足，放映已经终止。外壳温度过高。系统版本不匹配。UPS连接失败。Make sure that DCPs and KDMs are l new KDM to extend the duration ofthe root cause before resettingemergency NTP server setting andcommunication the system buffer margin hits the buffer margin before for a while to see if thetemperature become softwares via the USB cable for the UPS.

UPS设备与系统配置不符。Check the configuration and the UPS.放映机处于紧急状态，但灯泡未点亮，或发生Reboot the system after current show isfinished, and resume the show by the了通讯错误。Auditorium screen of status tab to clearthe emergency state.磁盘阵列需要紧急修复。磁盘阵列错误。服务器单元内存2发生错误。服务器“”电池有缺陷。服务器所有电池故障。服务器电源警告。服务器电源错误。服务器所有电源错误。服务器某风扇警告。服务器某风扇错误。SSD发生报警。SSD发生错误。放映机连接失败。Perform rebuilding of RAID by insertingspare HDD to empty slot as soon t your local serviceContact your local serviceReplace the backup batteryContact your local serviceReplace the power supply unit {0}Replace the power supply unit {0}Replace all power supply unitReplace the fan unit {0} or Contact yourlocal service representative. CallserviceShutdown server unit and replace the fanunits or Contact your local servicerepresentative. Call serviceContact your local serviceContact your local serviceCheck ethernet connection between serverunit and on the projector projector switch off and on in caseIMB led is blinking in shutdown the system then checkPCIe cable connection between server unitand CPL"{0}" validation ingest this content again whenstatus is ise please contact your localservice t your local serviceContact your local serviceContact your local serviceContact your local serviceContact your local servicePCIe未连接。“”播放时发生紧急错误。IMB视频单元不可用。IMB音频单元不可用。IMB视频调频无法使用IMB音频调频无法使用IMB电池故障IMB安全认证失败放映机电源故障Please initialize security t your local servicerepresentative.

放映机电路板连接中断

放映机散热设备连接中断放映机“”温度过高Check air intake and volume of exhaust t your local servicerepresentative.

放映机排风系统故障Contact your local service放映机内部通讯错误Contact your local service

点灯错误Repower LampRepower Lamp once after turn it off.灯泡意外熄灭Repower ProjectorRepower Lamp once after turn it off.放映机光学系统初始化失败无法进行变焦调节无法进行聚焦调节Check any obstruction around the lens.亮度值测量失败排风量低于阈值灯门被打开Contact your local volume of exhaust volume of exhaust the lamp door.

Close the lamp door.放映机内部连锁触发放映机灯泡通讯错误External interlock is ent type of lamp is lamp type and install proper ncy switch has been pushed.放映机内存通讯错误Install proper l proper option board.放映机亮度调节超出位置范围No more brightness control is more brightness control is the lamp.灯泡达到使用寿命空气过滤网使用时间到期，需清理实时时钟电池电量低安全模块错误安全模块通讯错误安全模块电池电量低安全模块电池即将耗尽安全模块安全锁触发安全模块通讯错误亮度值测量失败Clean the air filterContact your local t your local service.遮光板无法工作亮度调节板无法工作Contact your local service.

解决办法（中文）1. 检查GPI触发器的针脚配置；2. 拨打索尼售后服务热线.拨打索尼售后服务热线.拨打索尼售后服务热线.使用eCNA-10 : 设置正确的IP地址并检查网络连接。未使用eCNA-10: 复位 eCNA-10 IP地址.检查电源，如果是停电请关机等待来电。将UPS电池充足电.检查UPS检查UPS检查UPS拨打索尼售后服务热线.及时清理磁盘空间，删除下线影片拨打索尼售后服务热线.拖动进度条至中断位置以恢复放映.拖动进度条至中断位置以恢复放映.当放映机类型是3D时，服务器应使用3D功能。当放映机类型是2D时，服务器应使用2D功能。请准备3D镜头。3D SPL在开始部分必须包含3D命令。检查影片和密钥正确导入。导入新的密钥以延长影片放映周期复位1状态前移除启动故障检查时间服务器配置及连接。手动重新启动系统PWI buffer margin hits bottom.检查缓存限度等待一会儿再确认温度是否恢复正常升级软件版本检查UPS的USB连接线

检查确认配置信息和UPS设备信息。当前放映结束后重启服务器，调整放映状态消除1状态。插入新盘，执行RAID重建联系NOC报修联系NOC报修更换备用电池联系NOC报修更换{0}电源更换{0}电源更换所有电源更换{0}风扇关闭服务器更换故障风扇更换 PU-135板上的SSD更换 PU-135板上的SSD检查投影机和服务器连接线，IMB红灯闪烁时关开投影机。关闭系统检查投影机和服务器的PCIe连接线检查 CPL"{0}" 可用状态或重新导入影片。IMB 未工作，检查 SSP板模块IMB 未工作，检查 SSP板模块IMB 未工作，检查 SSP板模块IMB 未工作，检查 SSP板模块更换备用电池对安全状态初始化检查SY-401、SU-165、LMP-18板

检查以下连接：peltie(Red) 和 DST-29 板DST-29板 和 CT-274板CT-274板 和 LPD-7 板检查以下连接：peltie(Green) 和 DST-29 板DST-29板 和 CT-274板CT-274板 和 LPD-7 板检查以下连接：peltie(Blue) 和 DST-29 板DST-29板 和 CT-274板CT-274板 和 LPD-7 板检查投影机风扇及放映间温度；检查抽风机工作是否正常。

检查风扇和SY-401主板检查SY-401主板

重新点灯重新启动放映机重新点灯检查镜头周围是否有障碍物检查SPF-16主板的光传感器检查抽风量检查抽风量关闭灯门

关闭灯门复位内部连锁检查灯泡型号，安装正确型号灯泡。1按键被触发安装正确镜头Call service.安装正确镜头No more brightness control is more brightness control is made.更换灯泡清洁空气过滤网更换电池更换CPU-450板更换CPU-450板上的SD卡更换电池更换电池更换CPU-450板更换CPU-450板检查SPF-16主板的光传感器 、CT-274板、LPD-7板

检查光闸、DST-29板、CT-274板和LPD-7板检查SY-401主板和调光器组件