iPhone XR 回收指南说明书-USB迷|专注于互联网分享

2024年3月7日发(作者：夹谷饮)

Apple Recycler Guide

Contents 3

About This GuideIdentificationDirective 2012/19/EU Annex VII ComponentsSafety ConsiderationsRecommended ToolsDisassembly InstructionsMaterial Categorization of Output Fractions© 2022 Apple Inc. All rights reserved.

iPhone XR Recycler Guide2

About This GuideApple Recycler Guides provide guidance for electronics recyclers on how to disassemble products to

maximize recovery of resources. The guides provide step-by-step disassembly instructions and information

on the material composition to help recyclers direct fractions to the appropriate material conserve important resources, we work to reduce the materials we use and aim to one day source only

recycled or renewable materials in our products. A key path to reaching that goal is resource recovery

from end-of-life embly procedures are intended to be performed only by trained electronics recycling professionals.

The recycler is responsible for independently evaluating and ensuring compliance with all applicable

environmental, health, and safety laws related to the work. These include but are not limited to laws

relating to the management, handling, shipping, and disposal of the outputs of this work as waste and

iPhone XR Recycler Guide3

IdentificationYou can find the model number of the iPhone inside the SIM tray slot.

Model numbers:

A1984, A2105, A2106, A2107, A2108

iPhone XR Recycler Guide4

Directive 2012/19/EU Annex VII ComponentsDirective 2012/19/EU Annex VII requirements apply to the following substances and nce/ComponentPrinted circuit board if the

surface is greater than 10

square centimetersExternal electric cablesLocationMain logic boardRemoval InstructionsFollow steps 1–13Power adapterFollow step 1BatteryiPhone enclosureFollow steps 1–8Cover glass and LCD cell if

the surface is greater than

100 square centimetersNo further substances or

components as listed in

iPhone XR Recycler Guide5

Safety ConsiderationsThe recycler is responsible for independently evaluating all activities undertaken by its employees to

perform or support the work and ensuring compliance with all applicable health and safety laws related

to the work. These include but are not limited to laws relating to the health and safety of all employees

who perform or support this work. The recycler is also responsible for evaluating the workspace and

ensuring that the area in which the work is to be undertaken is designed using ergonomic best practices

and meets all ergonomic requirements to ensure the protection of its al Protective EquipmentPersonal protective equipment should be worn during the entire recycling hand protection Wear eye protection Wear protective clothing Wear a mask Wear foot protection Battery SafetyThis product uses a lithium-ion polymer battery. Follow these steps for safe removal and disposal

of the battery:•

•

Discharge the battery to less than 25 percent before beginning any disassembly. Thermal

runaway is less likely to occur in a discharged anything from your person that could conduct energy, such as jewelry and watches, to

avoid electric shock to yourself or the logic avoid the potential for thermal runaway and the release of potentially noxious fumes, don’t

puncture, strike, or crush lithium-ion polymer batteries or devices powered by ’t throw, drop, or bend the battery.

Don’t expose the battery to excessive heat or only tools that are not sharp and do not conduct your workspace clear of foreign objects and sharp materials.

iPhone XR Recycler Guide6

Workspace safety guidelines•

•

Use heat-resistant gloves and safety a sand dispenser within arm’s reach (2 feet or 0.6 m) on either side of the workstation, not

above the workstation. The dispenser should be a wide-mouthed, quick-pour metal container

with a flip-top lid or tray that contains 8–10 cups (1.9–2.4 L) of clean, dry, untreated the battery at least 2 feet (0.6 m) from paper and other combustible in an area with adequate ng a thermal runawayIf you notice any of the following signs, a thermal runaway is likely underway, and you should

act immediately:•

•

The lithium-ion polymer battery or a device containing one begins to smoke or emit sparks or battery pouch suddenly and quickly puffs hear hissing or popping ’t use water or an ABC/CO2 fire extinguisher on a thermal runaway battery or a device containing

one. Water and ABC/CO2 fire extinguishers will not stop the smother the battery or device immediately with plenty of clean, dry sand, dumped all at once.

Timing is critical; the faster you pour all the sand, the faster the thermal runaway will leave the room for 30 minutes if the thermal runaway causes any wait 30 minutes before touching the battery. Wear heat-resistant gloves and safety glasses

to remove the battery from the sand, or use a touchless thermometer to measure the battery

temperature. Only touch the battery when the event has finished.

Do dispose of the damaged battery or device (including any debris removed from the sand)

according to local environmental laws and guidelines.

LED SafetyBroken LEDs must be handled properly to ensure the safety of your employees and mitigate

any hazards. Package broken LEDs in an appropriate container to properly manage the hazards

associated with the materials and store only with compatible materials. All waste must be properly

iPhone XR Recycler Guide7

iPhone XR Recycler Guide8

iPhone XR Recycler Guide9

Disassembly Instructions1.

Remove the power adapter and charge cable.»

FractionTurn off the adapter»

Unplug the power adapter. Disconnect both ends of the

iPhone XR Recycler Guide10

Remove the glass hazard Chemical exposure hazard Tools Used»

Hold the iPhone at the edge of a counter with the display face

up and the Lightning connector toward the counter the tool tip into the Lightning connector. Push the handle

iPhone XR Recycler Guide11

Remove the display by hand. Set the enclosure aside.3.

iPhone XR Recycler Guide12

Pry off the receiver.

Tools UsedFractionReceiverREE5.

iPhone XR Recycler Guide13

iPhone XR Recycler Guide14

iPhone XR Recycler Guide15

Inside the enclosure, carefully remove the

lithium-ion polymer geable battery hazard Tools UsedFractionLithium-ion

iPhone XR Recycler Guide16

Pry off the Taptic UsedFractionTaptic Engine

REE10.

Pry off the Lightning UsedFractionLightning connector

iPhone XR Recycler Guide17

11.

iPhone XR Recycler Guide18

12.

Remove the SIM reader, SIM tray, and SIM card.»

Pry off the SIM reader.

Tools UsedFractionSIM readerCuFraction»

Pull the SIM tray out of the SIM trayAlFraction»

iPhone XR Recycler Guide19

13.

Pry off the main logic UsedFractionMain logic boardPMs14.

iPhone XR Recycler Guide20

15.

Pry off the rear camera.

Tools UsedFractionRear cameraPMs16.

iPhone XR Recycler Guide21

17.

Pull off the ribbon cables by onRibbon cablesCu18.

Pry off the top light UsedFractionTop light sensor

iPhone XR Recycler Guide22

19.

iPhone XR Recycler Guide23

20.

Pull the enclosure band off the support UsedFractionEnclosure band

iPhone XR Recycler Guide24

Material Categorization of Output FractionsAll outputs from this process must be managed, handled, and disposed of in accordance with applicable

waste laws and regulations, including but not limited to the Waste Framework Directive and its national

iPhone XR Recycler Guide25

FractionFerrousDownstream ProcessingPrimary Target MaterialFePotential Additional MaterialsDisplay shieldGLGlassPrimary Target MaterialGLPotential Additional MaterialsLCD cellITO

iPhone XR Recycler Guide26

iPhone XR Recycler Guide27

FractionMixed ElectronicsDownstream ProcessingPrimary Target MaterialCuPower adapterPotential Additional MaterialsFeCharge cable

PLPMsLightning connectorSIM readerFlashlightRibbon cables

iPhone XR Recycler Guide28

FractionLogic BoardsDownstream ProcessingPrimary Target MaterialPMsLED logic boardPotential Additional MaterialsSIM cardAl

GLCu

PLFe

iPhone XR Recycler Guide29

FractionRare Earth MagnetsDownstream ProcessingPrimary Target MaterialREEReceiverPotential Additional MaterialsTaptic EngineCu

iPhone XR Recycler Guide30