2024年3月11日发(作者：修朔)
标准号
GB 8178-1987
GB 8544-1987
GB 8646-1988
GB 6608-1986
GB/T 10571-1989
GB 8734-1988
GB 8735-1988
GB/T 12769-2003
GB/T 11109-1989
GB/T 1196-1993
GB/T 1196-2002
GB/T 1173-1995
GB/T 13586-1992
GB/T 1197-1975
GB/T 16501-1996
GB/T 14846-1993
GB/T 16474-1996
GB/T 17432-1998
GB/T 16865-1997
GB/T 17731-1999
GB/T 17171-1997
GB/T 16475-1996
GB/T 17731-2004
GB/T 19347-2003
GB/T 15115-1994
GB/T 3614-1999
GB/T 3615-1999
GB/T 3616-1999
GB/T 19078-2003
GB/T 3499-1995
GB/T 3618-1989
GB/T 3499-2003
GB/T 3190-1996
GB/T 4296-2004
GB/T 4436-1995
GB/T 4437.1-2000
GB/T 4437.2-2003
GB/T 3129-1982
GB/T 3191-1998
GB/T 3194-1998
GB/T 3195-1997
GB/T 3196-2001
GB/T 3197-2001
GB/T 3198-2003
GB/T 3199-1996
GB 4864-1985
GB/T 5154-1985
GB/T 5154-2003
GB/T 5155-1985
GB/T 4438-1984
GB/T 5155-2003
GB/T 5156-1985
GB/T 5156-2003
GB/T 5150-1985
GB/T 5150-2004
GB/T 5153-1985
GB/T 3880-1997
GB/T 4864-1995
GB/T 4292-1999
GB/T 4293-1984
GB/T 5153-2003
GB/T 5237.1-2000
GB/T 5237.2-2000
GB/T 6891-1986
GB/T 5237.3-2000
GB/T 6892-2000
GB/T 5237.4-2000
GB/T 5237.5-2000
GB/T 6893-2000
GB/T 5237-1993
GB/T 6519-2000
GB/T 8544-1997
GB/T 8545-1987
GB/T 8733-2000
GB/T 8890-1998
GB/T 8179-1987
GB/T 8180-1987
GB/T 8644-2000
GB/T 8645-1988
GJB 1738-1993
GJB 1742-1993
GJB 1744-1993
GJB 1745-1993
GJB 1531-1992
GBn 221-1984
GBn 222-1984
GJB 1536-1992
GJB 1537-1992
GBn 168-1982
GJB 2055-1994
GJB 1833-1993
GJB 2920-1997
GJB 756-1989
GJB 395-1987
GJB 495-1988
GJB 581-1988
GJB 1540-1992
GJB 2894-1997
GJB 494-1988
GJB 582-1988
GB 5237.1-2004
GB 5237.2-2004
GB 5237.3-2004
GB 5237.4-2004
GB 5237.5-2004
GB 5237.6-2004
GB 5149.1-2004
GB 5149-1985
GB/T 1196-2008
GB/T 3954-2008
GB/T 17171-2008
GB/T 19347.2-2005
GB/T 20926-2007
GB/T 3199-2007
GB/T 3615-2007
GB/T 8733-2007
GJB/Z 125-1999
GB 5237-1985
GB/T 6892-2006
GJB 5497-2005(K)
GB/T 4292-2007
GB/T 13586-2006
GB/T 22662.3-2008
GB/T 22662.4-2008
GB/T 22662.5-2008
GJB 5077-2001(K)
GB/T 3618-2006
GB/T 22662.6-2008
GB/T 22662.7-2008
GB/T 22662.8-2008
GB/T 4438-2006
GB/T 22662.9-2008
GB/T 22667-2008
GB/T 22662.2-2008
GB/T 6891-2006
GB/T 22668-2008
GB/T 22661.10-2008
GB/T 22661.1-2008
GB/T 20250-2006
GB 3499-1983
GB/T 22661.2-2008
GB 4367-1984
GB/T 22661.3-2008
GB/T 22661.4-2008
GB 4368-1984
GB/T 22661.5-2008
GB/T 22661.6-2008
GB 3190-1982
GB/T 22661.7-2008
GB 3191-1982
GB/T 22661.8-2008
GB/T 22661.9-2008
GB 3192-1982
GB 3193-1982
GB 3194-1982
GB 3195-1982
GB 3198-1996
GB/T 22662.1-2008
GB 3199-1982
GB 4436-1984
GB/T 3195-2008
GB 3614-1983
GB 3615-1983
GB 3616-1991
GB 4437-1984
GB 3617-1983
GB 3619-1983
GB 3620-1983
GB 10568-1989
GB 10569-1989
GB 3621-1983
GB 3622-1983
GB 3623-1983
GB 3624-1983
GB 3625-1983
GB 10570-1989
GB 10572-1989
GB 4292-1984
GB 4294-1984
GB 1173-1986
GB 3880-1983
GB 3881-1983
GB 1196-1988
GB/T 3880.1-2006
GB/T 3880.2-2006
GB/T 3880.3-2006
GB/T 4864-2008
GB 12768-1991
GB/T 17731-2009
GB/T 24481-2009
GB/T 24483-2009
GB/T 24486-2009
GB/T 24487-2009
GJB 5909-2006(K)
GB 5237.1-2008
GB/T 14846-2008
GB 5237.2-2008
GB 5237.3-2008
GB 5237.4-2008
GB/T 22641-2008
GB/T 22642-2008
GB/T 22643-2008
GB/T 22644-2008
GB/T 22645-2008
GB/T 22646-2008
GB/T 22647-2008
GB/T 22648-2008
GB 5237.5-2008
GB/T 22649-2008
CB 1191-1988
HB 5471-1991
HB 5473-1991
HB/Z 215-1992
GB/T 23612-2009
JB 4394-1987
JB 2412-1978
SJ 20500-1995
SY/T 0095-2000
JB/T 6986-1993
QB 903-1983
YS/T 243-2001(2009)
YS/T 309-1998
YS/T 242-2000
YS/T 322-1994(2009)
YB/T 109.1-1997
YS/T 282-2000(2009)
SN/T 0991-2001
YS/T 274-1998(2009)
YS/T 407-1997
YS/T 67-1993
YS/T 275-2000
YS/T 69-1993
YS/T 417.1-1999(2009)
YS/T 417.2-1999(2009)
YS/T 435-2000
YS/T 417.3-1999(2009)
YS/T 436-2000(2009)
YS/T 417.4-1999(2009)
YS/T 417.5-2000(2009)
YS/T 419-2000(2009)
YS/T 420-2000(2009)
YS/T 439-2001
YS/T 446-2002
YS/T 421-2000
YS/T 212-1994
YS/T 213-1994
YS/T 447.1-2002
YS/T 214-1994
YS/T 454-2003(2009)
YS/T 458-2003
YS/T 215-1994
YS/T 75-1994
YS/T 90-1995
YS/T 90-2002
YS/T 91-1995
YS/T 91-2002
YS/T 92-1995(2009)
YS/T 95.2-2001
YS/T 97-1997
YS/T 459-2003
YS/T 100-1997
YS/T 430-2000
YS/T 431-2000
YS/T 432-2000(2009)
YS/T 517-2006
YS/T 490-2005
YS/T 491-2005
YS/T 492-2005
YS/T 493-2005
YS/T 494-2005
YS/T 495-2005
YS/T 496-2005
YS/T 67-2005
YS/T 489-2005
YS/T 434-2000
YS/T 560-2007
YS/T 560-2006
YS/T 570-2006
QC/T 756-2006
SN/T 1408-2004
YS/T 95.1-2001
SN/T 1038-2002
YS/T 589-2006
YS/T 69-2005
YS/T 457-2003(2009)
YS/T 479-2005
YS/T 588-2006
YS/T 590-2006
YS/T 678-2008
YS/T 619-2007
YS/T 621-2007
YS/T 622-2007
YS/T 624-2007
YS/T 626-2007
YS/T 627-2007
YS/T 421-2007
JG/T 175-2005
YS/T 275-2008
YS/T 711-2009
YS/T 712-2009
YS/T 713-2009
YS/T 641-2007
YS/T 90-2008
YS/T 695-2009
YS/T 696-2009
YS/T 697-2009
YS/T 698-2009
YS/T 714-2009
YS/T 665-2009
YS/T 686-2009
YS/T 687-2009
YS/T 688-2009
YS/T 95.1-2009
YS/T 95.2-2009
YS/T 689-2009
YS/T 690-2009
YS/T 91-2009
YS/T 242-2009
YS/T 431-2009
YS/T 434-2009
CJ/T 321-2010
SN/T 2264-2009
SN/T 1038-2002(2010)
YS/T 725-2010
YS/T 726-2010
YS/T 727-2010
ANSI H35.2-2009
YS/T 435-2009
ANSI H35.3-1997
ANSI H35.2M-2009
ANSI H35.5-1993
ANSI C80.5-2005
ANSI H35.1/H 35.1M-2009
NF A50-738-1987
ANSI H35.4-2006
NF A08-650-1992
NF A36-345-1991
NF P34-631-1983
NF A50-931-1994
NF A57-140-1995
NF A65-727-1988
NF A57-110-1995
NF A02-040-1997
NF A50-110-10-2003
NF A50-110-14-2003
NF A50-921-1996
NF A57-100-2004
NF A50-110-8-2003
NF A50-811-1997
NF A50-813-1997
NF A50-423-1994
NF A50-110-15-2003
NF A50-110-12-2003
NF A50-810-1997
NF A50-110-11-2003
NF A02-121-1994
NF A50-110-9-2003
NF A50-430-1995
NF A57-500-1997
NF A57-502-1998
NF A50-434-1-1998
NF A57-501-1998
NF A50-120-2000
NF A50-422-2003
NF A50-001-2-2005
NF A50-110-7-2003
NF A50-470-2-2004
NF A50-110-5-2003
NF A50-431-1995
NF A50-426-2004
NF A02-130-2-2003
NF A02-130-1-2003
NF A50-110-2-2003
NF A50-932-3-2002
NF A57-120-2004
NF A50-930-1997
NF A50-911-1997
NF A50-920-1996
NF A02-016-2006
NF A50-470-3-2006
NF A50-101-1990
NF A50-460-3-2007
NF A50-121-2006
NF A50-510-2007
NF A50-460-1-2007
NF A50-440-1-2007
NF A50-440-4-2007
NF A50-800-2-2007
NF A50-440-3-2007
NF A02-120-5-2007
NF A50-650-2-2008
NF A50-115-2008
NF A50-610-6-2008
NF A50-610-1-2008
NF A50-640-1-2008
NF A50-610-7-2008
NF A50-630-4-2008
NF A50-630-5-2008
NF A50-610-4-2008
NF A50-610-5-2008
NF A50-640-2-2008
NF A50-630-2-2008
NF A50-670-1-2008
NF A50-645-2008
NF A50-420-2-2008
NF A50-620-2008
NF A50-425-2008
NF A50-610-3-2008
NF P34-411-1983
NF P34-601-1981
NF A50-420-1/IN1-2009
NF A02-150-1993
NF A50-435-1996
NF A50-670-2-2008
NF A50-110-1-2003
NF P34-504-1983
NF A50-712-1986
NF A50-420-1-2009
NF A50-110-4-2003
NF A50-110-13-2003
NF A02-130-3-2003
NF A50-437-2007
NF A50-670-3-2008
NF A65-737-1988
NF A50-812-1997
NF A03-301-2002
NF A50-001-4-2005
NF A50-432-2007
NF A50-440-2-2007
NF A05-110-2001
NF P34-602-1981
NF A65-777-1988
NF A02-007-1973
NF A50-630-3-2008
NF A50-434-2-1998
NF A50-001-3-2003
NF A50-630-6-2008
NF A50-630-9-2008
NF A50-630-1-2008
NF A50-110-16-2003
NF A50-800-1-2007
NF A50-001-1-1998
NF A50-110-3-2003
NF A50-100-2004
NF A50-610-8-2008
NF A50-460-2-2007
NF A50-630-7-2008
NF A50-433-2007
NF A50-910-1997
NF A50-610-2-2008
NF A50-110-6-2003
NF A50-470-1-2003
NF A50-922-2000
JIS H5203-2006
JIS H5303-2006
JIS H2221-2006
JIS H2222-2006
JIS H2110-1968
JIS H4160-1994
JIS H1306-1999
JIS H0001-1998
JIS H4040 ERRATUM 1-2006
JIS H4000-2006
JIS H4001-2006
JIS H4040-2006
JIS H4080-2006
JIS H4201-2005
JIS H1367-2005
JIS H4100-2006
JIS H4203-2005
JIS H4204-2005
JIS H1368-2005
JIS H2103 AMD 1-2006
JIS H4090 AMD 1-2006
JIS H4202-2005
JIS H4160 AMD 1-2006
JIS H2102-1968
JIS H2103-1965
JIS H2111-1968
JIS H4170 AMD 1-2006
JIS G2314-1986
JIS H4140-1988
JIS H2119-1984
JIS H4170-1991
JIS S2010-1997
JIS H4000 ERRATUM 1-2006
JIS H4100 ERRATUM 1-2006
JIS H5302-2006
JIS H5801-2000
JIS H2118-2006
JIS H4635 ERRATUM 1-2006
JIS H0542-2008
JIS H1342-2008
JIS H2118 ERRATUM 1-2006
JIS H2102 AMD 1-2009
JIS H1343-2008
JIS H4040 ERRATUM 2-2008
JIS H2110 AMD 1-2009
JIS H4080 ERRATUM 1-2008
JIS H4100 ERRATUM 2-2008
JIS S2010 AMD 1-2009
JIS H4100 ERRATUM 1-2008
JIS H4040 ERRATUM 1-2008
JIS H2111 AMD 1-2009
ISO 2379-1972
ISO 6365-1-1988
JIS H2211-2010
ISO 8007-1-1999
ISO 10049-1992
ISO 9915-1992
ISO 9591-2004
ISO 6361-2-1990
ISO 23079-2005
ISO 16220-2005
ISO 5931-2000
ISO 12979-1999
ISO 12977-1999
ISO 9088-1997
ISO 8287-2000
ISO 8658-1997
ISO 12980-2000
ISO 6362-5-2001
ISO 6361-1-1986
ISO 7274-1981
ISO 8007-2-1999
ISO 6362-3-2001
ISO 6363-4-1991
ISO 6363-1-1988
ISO 7773-1983
ISO 6361-4-1988
ISO 209-2007
ISO 17615-2007
ISO 26202-2007
ISO 3522-2007
ISO 2377-1972
ISO 2378-1972
ISO 10143-1995
ISO 6363-2-1993
ISO 6362-2-1990
ISO 5193-1981
ISO 6362-1-1986
ISO 6362-4-1988
ISO 7271-1982
ISO 115-2003
ISO 806-2004
ISO 6361-3-1985
ISO 16220 AMD 1-2007
ISO 17615 Technical
Corrigendum 1-2008
ISO 2107-2007
ISO 6363-5-1992
ISO 10236-1995
ISO 10142-1996
ISO 8007-3-2003
ISO 3116-2007
IEC 60114 Corrigendum 1-
1959
EN 603-1-1996
EN 12482-1-1998
EN 13920-10-2003
EN 13920-16-2003
EN 13981-1-2003
EN 1669-1996
EN 1780-2-2002
EN 577-1995
EN 13920-4-2003
EN 13920-2-2003
EN 13920-13-2003
EN 1753-1997
EN 12482-2-1998
EN 12060-1997
EN 485-4-1993
EN 12373-11-2000
EN 12258-1-1998
EN 586-3-2001
EN 12373-12-2000
EN 12258-4-2004
EN 12373-19-2001
EN 13920-8-2003
EN 1592-1-1997
EN 13920-9-2003
EN 1396-2007
EN 570-2007
EN 601-2004
EN 683-1-2006
EN 1301-3-2008
EN 755-3-2008
EN 754-6-2008
EN 573-5-2007
EN 754-4-2008
EN 755-8-2008
EN 754-3-2008
EN 754-2-2008
EN 1301-1-2008
EN 754-8-2008
EN 485-2-2008
EN 1715-1-2008
EN 755-9-2008
EN 13920-15-2003
EN 14121-2009
EN 575-1995
EN 13920-7-2003
EN 1715-3-2008
EN 13920-1-2003
EN 1386-2007
EN 755-6-2008
EN 755-1-2008
EN 546-3-2006
EN 1301-2-2008
EN 12020-1-2008
EN 755-4-2008
EN 586-1-1997
EN 12373-10-1998
EN 515-1993
EN 13920-14-2003
EN 1715-2-2008
EN 13957-2008
EN 1780-3-2002
EN 541-2006
EN 13981-2-2004
EN 755-2-2008
EN 754-1-2008
EN 14286-2008
EN 1780-1-2002
EN 13981-3-2006
EN 1715-4-2008
EN 485-3-2003
EN 754-5-2008
EN 13958-2008
EN 754-7-2008
EN 546-2-2006
EN 573-3-2009
EN 573-2-1994
EN 941-1995
EN 755-7-2008
EN 13920-6-2003
EN 576-2003
EN 604-1-1997
EN 12258-3-2003
EN 683-2-2006
EN 12392-2000
EN 15530-2008
EN 546-1-2006
EN 1706-2010
EN 604-2-1997
EN 13920-12-2003
EN 603-3-2000
EN 13920-3-2003
EN 573-1-2004
EN 755-5-2008
EN 1754-1997
EN 1592-4-1997
EN 13981-4-2006
EN 586-2-1994
EN 603-2-1996
EN 13920-5-2003
EN 13920-11-2003
EN 602-2004
EN 851-1995
EN 1592-2-1997
EN 1592-3-1997
EN 683-3-2006
EN 14287-2004
EN 546-4-2006
EN 12020-2-2008
EN 1676-2010
EN 15088-2005
BS EN 61788-7-2006
BS EN 546-4-2006
BS EN 546-3-2006
BS 3313-1-1968
BS ISO 17615-2007
BS EN 546-1-2006
BS EN 586-3-2002
BS EN 2290-1-1998
BS 6043-2.12-1994
BS EN 2630-1994
BS EN 755-1-2008
BS M 93-2005
BS EN 755-3-2008
BS EN 1715-2-2008
BS EN 1396-2007
BS EN 570-2007
BS EN 683-3-2006
BS EN 755-4-2008
BS EN 12020-1-2008
BS EN 754-1-2008
BS EN 755-5-2008
BS EN 755-7-2008
BS EN 754-2-2008
BS EN 13958-2008
BS EN 755-8-2008
BS EN 485-2-2008
BS EN 1715-1-2008
BS EN 1669-1997
BS EN 577-1996
BS EN 1715-3-2008
BS EN 2385-1992
BS EN 12258-2-2004
BS EN 2126-1992
BS EN 485-1-2008+A1-2009
BS EN 1676-2010
BS EN 1706-2010
BS EN 13957-2008
BS EN 14121-2009
BS 4300/10-1969
BS EN 12421-1998
BS EN 941-1996
BS L 117-1975
BS 4L 100-1993
BS EN 13920-5-2003
KT 1-1999
BS EN 13981-4-2006
BS ISO 806-2004
BS EN 541-2006
BS EN ISO 2128-2010
BS ISO 3116-2007
BS EN 1301-1-2008
BS EN 2284-1991
BS EN 2093-1992
BS 7L 37-1989
BS EN 2004-1-1993
BS EN 2334-1997
BS EN 2082-1-1991
BS EN 13920-11-2003
BS L 115-1971
BS EN 1386-2007
BS EN 12258-4-2004
BS EN ISO 3211-2010
BS 2897-1970
BS EN 2127-1992
BS L 113-1971
BS EN 2089-2005
BS EN 13981-2-2004
BS EN 13981-3-2006
BS EN 12020-2-2008
BS EN 755-9-2008
BS EN 15530-2008
BS EN 1301-3-2008
BS EN 604-2-1997
BS EN 13920-10-2003
BS L 110-1971
BS EN 683-2-2006
BS EN 13920-7-2003
BS ISO 16220-2005
BS EN 13981-1-2003
BS L 165-1978
BS EN 14286-2008
BS 4L 54-1986
BS EN 2326-1992
BS EN 2004-5-1993
BS EN 12438-1998
BS EN 546-2-2006
BS ISO 209-2007
BS EN 754-3-2008
BS EN 755-2-2008
BS EN 754-8-2008
BS EN 14287-2004
BS EN 12482-1-1998
BS EN 1301-2-2008
BS L 109-1971
BS EN 13920-9-2003
BS EN 2381-1992
BS EN 13920-14-2003
BS EN 12258-3-2003
BS EN 15088-2005
BS EN ISO 8993-2010
BS EN 755-6-2008
BS L 167-1978
BS 2898-1970
BS 6043-3.2-1997
BS EN 604-1-1997
BS EN 13920-16-2003
BS EN 13920-1-2003
BS EN 12482-2-1998
BS EN 754-4-2008
BS EN 754-7-2008
BS EN 13195-2009
BS L 114-1971
BS EN ISO 2085-2010
BS 6043-2.16-1998
BS EN 2636-1994
BS M 58-1986
BS EN 485-4-1994
BS EN 603-2-1997
BS EN 13920-15-2003
BS EN 13920-4-2003
BS EN 602-2004
BS EN 14361-2004
BS EN 12392-2000
BS EN 683-1-2006
BS EN 515-1993
BS EN 1715-4-2008
BS EN 2100-1992
BS EN 576-2003
BS 6L 16-1985
BS EN 754-6-2008
BS EN 573-5-2007
BS EN 2101-1991
BS EN 2633-1994
BS EN 2144-1994
BS EN 575-1996
BS EN 2128-1992
BS EN 603-1-1997
BS 6043-1.12-1994
BS EN 586-1-1998
BS L 112-1971
BS L 118-1975
BS L 105-1971
BS L 159-1978
BS L 512-1973
BS 5L 36-1985
BS 4L 59-1985
BS EN 1780-3-2002
BS EN 13920-13-2003
BS L 162-1976
BS EN 601-2004
BS EN 485-3-2003
BS EN 2384-1992
BS EN 13920-6-2003
BS EN 2318-1992
BS EN 586-2-1994
BS EN 12258-1-1998
BS EN 13920-8-2003
BS EN 13920-3-2003
BS EN 13920-2-2003
BS EN 13920-12-2003
BS EN 603-3-2000
BS EN 573-1-2004
BS EN 2094-1992
BS EN 2046-2001
BS EN 1780-2-2002
BS EN 1780-1-2002
BS EN 851-1996
BS ISO 23079-2005
BS 4L 101-1990
BS L 168-1978
BS EN 573-2-1995
BS L 166-1978
BS 4L 60-1985
BS 4L 61-1985
BS 5L 34-1985
BS 6L 17-1985
BS L 119-1975
DIN EN 13920-10-2003
DIN EN 13920-16-2003
DIN EN 12482-1-1998
DIN EN 13920-4-2003
DIN EN 13920-2-2003
DIN EN 13920-13-2003
DIN EN 12482-2-1998
DIN EN 12258-1-1998
DIN EN 12060-1998
DIN EN 12373-11-2000
DIN EN 12258-4-2005
DIN EN 12373-19-2001
DIN EN 12373-12-2000
DIN EN 13920-8-2003
DIN EN 13920-9-2003
DIN EN 1301-3-2008
DIN EN 13981-1-2003
DIN EN 1301-1-2008
DIN EN 1396-2007
DIN EN 13920-15-2003
DIN 9711-3-1963
DIN 46424-1973
DIN EN 14121-2009
DIN EN 13920-1-2003
DIN EN 1386-2008
DIN EN 1301-2-2008
DIN EN 12020-1-2008
DIN 40501-2-2005
DIN EN 13920-7-2003
DIN EN 13920-14-2003
DIN EN 12373-10-1999
DIN 17611-2007
DIN EN 13957-2009
DIN EN 13981-2-2004
DIN EN 13958-2009
DIN EN 13981-3-2006
DIN 9711-2-1963
DIN EN 14286-2008
DIN EN 13920-6-2003
DIN EN 12392-2000
DIN EN 12258-3-2003
DIN EN 13920-3-2003
DIN 9715-1982
DIN 5517-1-2003
DIN EN 13981-4-2007
DIN EN 13920-12-2003
DIN 1729-1-1982
DIN 9711-1-1963
DIN EN 13920-5-2003
DIN EN 14287-2004
DIN 5518-2005
DIN EN 13920-11-2003
DIN EN 15088-2006
DIN EN 12020-2-2008
DIN EN 586-1-1997
DIN EN 755-4-2008
DIN EN 1780-3-2003
DIN EN 541-2007
DIN EN 573-2-1994
DIN EN 755-2-2008
DIN EN 1715-2-2008
DIN EN 1780-1-2003
DIN EN 941-1995
DIN EN 1715-4-2008
DIN EN 485-3-2003
DIN EN 754-5-2008
DIN EN 755-8 Berichtigung 1-
2009
DIN EN 754-1-2008
DIN EN 754-7-2008
DIN EN 573-3-2009
DIN EN 546-2-2007
DIN EN 755-7-2009
DIN EN 576-2004
DIN EN 683-2-2007
DIN EN 546-1-2007
DIN EN 15530-2008
DIN EN 604-1-1997
DIN EN 604-2-1997
DIN EN 603-3-2000
DIN EN 1706-2010
DIN EN 1592-4-1997
DIN EN 573-1-2005
DIN EN 851-1995
DIN EN 1754-1997
DIN EN 586-2-1994
DIN EN 602-2004
DIN EN 603-2-1996
DIN EN 683-3-2007
DIN EN 755-5-2008
DIN EN 1592-2-1997
DIN EN 546-4-2007
DIN EN 1592-3-1997
DIN EN 485-2 Bb.1-1996
DIN EN 1676-2010
DIN EN 603-1-1996
DIN EN 1669-1997
DIN EN 577-1995
DIN EN 1753-1997
DIN EN 1780-2-2003
DIN EN 586-3-2002
DIN EN 1592-1-1997
DIN EN 485-4-1994
DIN EN 601-2004
DIN ISO 8658-2003
DIN EN 683-1-2007
DIN EN 755-8-2008
DIN EN 570-2007
DIN EN 1715-3-2008
DIN EN 755-3-2008
DIN EN 754-6-2008
DIN EN 754-8-2008
DIN EN 1715-1-2008
DIN EN 573-5-2007
DIN EN 754-4-2008
DIN EN 754-3-2008
DIN EN 754-2-2008
DIN EN 755-9-2008
DIN EN 485-2-2009
DIN EN 755-2 Berichtigung 1-
2009
DIN EN 575-1995
DIN EN 755-9 Berichtigung 1-
2009
DIN EN 546-3-2007
DIN EN 755-6-2008
DIN EN 755-1-2008
DIN EN 515-1993
ASME 2239-1-2001
ASME 2019-1-2001
ASME 2344-2001
ASME 2354-2001
ASME 2382-1-2001
ASME 2403-2001
ASME 2153-1-2001
ASME N-519-2001
ASME 2432-2001
ASME SEC II B SB-209-2001
ASME SEC II B SB-210-2001
ASME SB210-2004
ASME SEC II B SB-211-2001
GB/T 3191-2010
ASME SEC II B SB-221-2001
ASME SEC II B SB-234-2001
GB/T 3198-2010
ASME SEC II B SB-241/SB-
241M-2001
GB/T 5154-2010
ASME SEC II B SB-308/SB-
308M-2001
JG 175-2011
GB/T 6893-2010
E1976-2005
ANSI B894-1999
B210M-2005
ANSI B669-1997
B491/B491M-2006
ANSI B750-1999
B221M-2007
B211M-2003
E1793-2005
ANSI B791-1997
E2422-2005
B209-2007
G139-2005
B94-2007
B37-2008
B480-1988(2010)
B909-2000(2006)
B317/B317M-2007
B247-2009
B750-2009
B179-2010
B947-2006
B557-2010
B313/B313M-2009
B308/B308M-2010
B831-2005
B234-2010
B769-2007
B209M-2007
B953-2007
B26/B26M-2009
B557M-2010
E1251-2007
B941-2010
B744/B744M-2005
B843-2007
D6353-2006
B776-2007
B403-2007
B327-2009a
B93/B93M-2009
E1977-2005
B373-2000(2006)
B210-2004
B107/B107M-2007
B316/B316M-2010
B928/B928M-2009
B547/B547M-2010
B736-2000(2006)
F1183-1996(2006)
B234M-2010
B91-2007
B954-2007
B918/B918M-2009
B881-2009
D5502-2000(2010)
B90/B90M-2007
B632/B632M-2008
B661-2006
B429/B429M-2010
D6906-2003(2010)e1
B241/B241M-2010
B479-2006
E1978-2005
B199-2007
B945-2006
B221-2008
F1594-1995(2003)
B646-2006a
E215-1998(2004)e1
B660-2008
B241/B241M-2002
B253-1987(2010)
F1513-1999(2003)
B211-2003
D6208-2007
JIS H4100 ERRATUM 3-2011
B247M-2009
铝合金国家、国际标准
中文名
氧化铝
铝及铝合金带材
半导体器件键合用铝硅合金(Alsil)丝
铝箔厚度的测定 称量法
铝及铝合金焊接管
铸造铝硅合金锭
铝中间合金锭
钛铜复合棒
铝及铝合金阳极氧化 术语
重熔用铝锭
重熔用铝锭
铸造铝合金
铝及铝合金废料,废件分类和技术条件
铝线锭
铝及铝合金热轧带材
铝及铝合金挤压型材尺寸偏差
变形铝及铝合金牌号表示方法
变形铝及铝合金化学成分分析取样方法
变形铝、镁及其合金加工制品拉伸试验用试样
镁合金牺牲阳极
水性铝膏
变形铝及铝合金状态代号
镁合金牺牲阳极
轨道车辆结构用铝合金挤压型材
压铸铝合金
铝合金箔
电解电容器用铝箔
电力电容器用铝箔
铸造镁合金锭
重熔用镁锭
铝及铝合金花纹板
原生镁锭
变形铝及铝合金化学成分
变形镁合金显微组织检验方法
铝及铝合金管材外形尺寸及允许偏差
铝及铝合金热挤压管 第1部分:无缝圆管
铝及铝合金热挤压管 第2部分:有缝管
铝钛合金丝
铝及铝合金挤压棒材
铝及铝合金板、带材的尺寸允许偏差
导电用铝线
铆钉用铝及铝合金线材
焊条用铝及铝合金线材
铝及铝合金箔
铝及铝合金加工产品 包装、标志、运输、贮存
金属钙
镁合金板
镁及镁合金板、带
镁合金热挤压棒
铝及铝合金波纹板
镁合金热挤压棒材
镁合金热挤压型材
镁合金热挤压型材
铝镁合金粉
铝镁合金粉
加工镁及镁合金牌号和化学成分
铝及铝合金轧制板材
金属钙及其制品
氟化铝
氟化钠
变形镁及镁合金牌号和化学成分
铝合金建筑型材 第1部分 基材
铝合金建筑型材 第2部分 阳极氧化、着色型材
铝及铝合金压型板
铝合金建筑型材 第3部分 电泳涂漆型材
工业用铝及铝合金热挤压型材
铝合金建筑型材 第4部分 粉末喷涂型材
铝合金建筑型材 第5部分 氟碳漆喷涂型材
铝及铝合金拉(轧)制无缝管
铝合金建筑型材
变形铝合金产品超声波检验方法
铝及铝合金冷轧带材
铝及铝合金模锻件的尺寸偏差及加工余量
铸造铝合金锭
热交换器用铜合金无缝管
高纯铝
钛及钛合金加工产品的包装、标志、运输和贮存
重熔用精铝锭
旋压无缝铝筒
特细铝粉规范
舰用LF15、LF16铝合金板材规范
航天用LD10铝合金冷拉(轧)管材规范
航天用LD10铝合金热挤压管材规范
铝合金装甲板规范
铝及铝合金冷拉管
铝及铝合金热挤压材
LC 19铝合金板材规范
LC19铝合金挤压型材规范
不可热处理强化的铝及铝合金板
铝及铝合金铆钉线材规范
舰用LF15、LF16铝合金挤压型材规范
2214、2014、2024及2017A铝合金棒材规范
铝塑布挤出复合材料
空-空导弹调制盘用单晶氟化镁
超低温用TA7-D钛合金棒材
红外制导"地-空"导弹用单晶氟化钙
装甲用铝合金板材规范
铝合金电导率和硬度要求
航空发动机压气机叶片用TC11钛合金棒材
透镜用多晶氟化镁
铝合金建筑型材 第1部分:基材
铝合金建筑型材 第2部分:阳极氧化、着色型材
铝合金建筑型材 第3部分:电泳涂漆型材
铝合金建筑型材 第4部分:粉末喷涂型材
铝合金建筑型材 第5部分:氟碳漆喷涂型材
铝合金建筑型材 第6部分:隔热型材
镁粉 第1部分 铣削镁粉
镁粉
重熔用铝锭
电工圆铝杆
水性铝膏
特殊环境条件 轨道车辆结构用铝合金挤压型材
镁及镁合金废料
铝及铝合金加工产品 包装、标志、运输、贮存
电解电容器用铝箔
铸造铝合金锭
军用铝合金、镁合金挤压型材截面手册
铝合金建筑型材
一般工业用铝及铝合金挤压型材
穿甲弹尾翼用铝合金挤压型材规范
氟化铝
铝及铝合金废料
氟钛酸钾化学分析方法 第3部分:氟钛酸钾含量的测定 硫酸高铁铵容量法
氟钛酸钾化学分析方法 第4部分:硅含量的测定 钼蓝分光光度法
氟钛酸钾化学分析方法 第5部分:钙含量的测定 火焰原子吸收光谱法
机载导弹发射架用铝合金异型管材规范
铝及铝合金花纹板
氟钛酸钾化学分析方法 第6部分:铁含量的测定 火焰原子吸收光谱法
氟钛酸钾化学分析方法 第7部分:铅含量的测定 火焰原子吸收光谱法
氟钛酸钾化学分析方法 第8部分:氯含量的测定 硝酸汞容量法
铝及铝合金波纹板
氟钛酸钾化学分析方法 第9部分:五氧化二磷含量的测定 钼蓝分光光度法
氟硼酸钾
氟钛酸钾化学分析方法 第2部分:湿存水含量的测定 重量法
铝及铝合金压型板
氟钛酸钾
氟硼酸钾化学分析方法 第10部分:五氧化二磷含量的测定 钼蓝分光光度法
氟硼酸钾化学分析方法 第1部分:试样的制备和贮存
铝及铝合金连续挤压管
重熔用镁锭 技术条件
氟硼酸钾化学分析方法 第2部分:湿存水含量的测定 重量法
焊接及焊接-轧制钛管
氟硼酸钾化学分析方法 第3部分:氟硼酸钾含量的测定 氢氧化钠容量法
氟硼酸钾化学分析方法 第4部分:镁含量的测定 火焰原子吸收光谱法
热交换器及冷凝器用焊接及焊接-轧制钛管
氟硼酸钾化学分析方法 第5部分:钙含量的测定 火焰原子吸收光谱法
氟硼酸钾化学分析方法 第6部分:硅含量的测定 钼蓝分光光度法
铝及铝合金加工产品的化学成分
氟硼酸钾化学分析方法 第7部分:钠含量的测定 火焰原子吸收光谱法
铝及铝合金挤压棒材
氟硼酸钾化学分析方法 第8部分:游离硼酸含量的测定 氢氧化钠容量法
氟硼酸钾化学分析方法 第9部分:氯含量的测定 硝酸汞容量法
高强度铝合金挤压棒
铝及铝合金热轧板
铝及铝合金板材的尺寸及允许偏差
导电用铝线
工业用纯铝箔
氟钛酸钾化学分析方法 第1部分:试样的制备和贮存
铝及铝合金加工产品的包装,标志,运输,贮存
铝及铝合金管 外形尺寸及允许偏差
铝及铝合金拉制圆线材
铝合金箔
电解电容器用铝箔
电力电容器用铝箔
铝及铝合金热挤压管
表盘及装饰用铝及铝合金板
纺织经编机盘片用铝合金模锻件
钛及钛合金牌号和化学成分
优质铝及铝合金热轧板
优质铝及铝合金冷轧板
钛及钛合金板材
钛带材
钛及钛合金丝
钛及钛合金无缝管
热交换器及冷凝器用无缝钛管
精制铝箔
优质铝及铝合金挤压棒材
氟化铝
氢氧化铝
铸造铝合金技术条件
铝及铝合金板材
钎接用铝合金板
重熔用铝锭技术条件
一般工业用铝及铝合金板、带材 第1部分:一般要求
一般工业用铝及铝合金板、带材 第2部分:力学性能
一般工业用铝及铝合金板、带材 第3部分:尺寸偏差
金属钙及其制品
重熔用电工铝锭
镁合金牺牲阳极
3C产品用镁合金薄板
铝土矿石
线缆编织用铝合金线
氧化铝
铝及铝合金中氢的测定 加热提取 热导法
铝合金建筑型材 第1部分:基材
铝及铝合金挤压型材尺寸偏差
铝合金建筑型材 第2部分:阳极氧化型材
铝合金建筑型材 第3部分:电泳涂漆型材
铝合金建筑型材 第4部分:粉末喷涂型材
船用铝合金板材
电子、电力电容器用铝箔
精铝丝
卡纸用铝及铝合金箔
泡罩包装用铝及铝合金箔
啤酒标用铝合金箔
软包装用铝及铝合金箔
软管用铝及铝合金箔
铝合金建筑型材 第5部分:氟碳漆喷涂型材
半刚性容器用铝及铝合金箔
SB 211壳体用919铝合金厚壁挤压管
2024铝合金预拉伸板
铝及铝合金化学转化膜质量检验
铝合金板材硬度与强度换算值
铝合金建筑型材阳极氧化与阳极氧化电泳涂漆工艺技术规范
稀土镁合金稀土总量、硅、镁的化学分析方法
船用变压器
方舱大板通用规范
埋地镁牺牲阳极试样试验室评价的试验方法
铝及铝合金电镀前表面准备方法
铝硅镁质匣钵
纺织经编机用铝合金线轴
重熔用铝稀土合金锭
表盘及装饰用纯铝板
冶金用二氧化钛技术条件
硅钡合金化学分析方法 高氯酸脱水重量法测定硅量
铝中间合金锭
出口镁锭检验规程
氧化铝
粉末静电喷涂铝合金建筑型材
LD30、LD31铝合金挤压用圆铸锭
高纯铝
钎接用铝合金板材
变形铝及铝合金铸锭及其加工产品缺陷 第1部分：变形铝及铝合金铸锭缺陷
变形铝及铝合金铸锭及其加工产品缺陷 第2部分：变形铝及铝合金板、带缺陷
易拉罐罐体用铝合金带材
变形铝及铝合金铸锭及其加工产品缺陷 第3部分：变形铝及铝合金箔缺陷
铝合金建筑型材图样图册
变形铝及铝合金铸锭及其加工产品缺陷 第4部分：变形铝及铝合金铸轧带缺陷
变形铝及铝合金铸锭及其加工产品缺陷 第5部分 管、棒、型、线缺陷
铝及铝合金杯突试验方法
铝合金韦氏硬度试验方法
铝及铝合金挤压扁棒
钎焊式热交换器用铝合金复合箔
印刷用PS版铝板基
可热处理强化的铝合金板
不可热处理强化的铝及铝合金板
铝及铝合金晶粒细化剂 第1部分:铝-钛-硼合金线材
可热处理强化的铝合金大规格板
铝及铝合金导体
轨道车辆结构用铝合金挤压型材配用焊丝
不可热处理强化的铝及铝合金大规格板
炼钢脱氧和部分铁合金用铝锭
铝及铝合金铸轧带材
铝及铝合金铸轧带材
瓶盖用铝及铝合金板、带材
瓶盖用铝及铝合金板、带材
铝合金花格网
空调器散热片用铝箔 第2部分 亲水铝箔
凿岩机用铝合金管材
有色电泳涂漆铝合金建筑型材
电泳涂漆铝合金建筑型材
电缆用铝箔
铝及铝合金彩色涂层板、带材
铝塑复合板用铝带
氟化钠
铝及铝合金压花板、带材
变形铝及铝合金用熔剂
铝及铝合金成分添加剂
活塞用4A11、4032合金挤压棒材
洗衣机用铝及铝合金板材
镁合金热挤压管材
钎焊式热交换器用铝合金箔
变形铝及铝合金圆铸锭
细晶铝锭
铝塑复合管用铝及铝合金带材
铸造铝阳极导杆
铝线锭
铝钛合金丝
轿车用高强度锻铝合金挤压圆棒材
出口金属镁颗粒检验规程
空调器散热片用铝箔 第1部分 素铝箔
进出口金属钠检验方法
煤矿支柱用铝合金棒材
钎焊用铝合金复合板
双零铝箔用冷轧带材
一般工业用铝及铝合金锻件
镁及镁合金挤制矩形棒材
变形铝及铝合金扁铸锭
半导体器件键合用铜丝
化学品氧化铝分类及牌号命名
百叶窗用铝合金带材
铁道货车用铝合金板材
一般工业用铝及铝合金拉制棒材
便携式工具用镁合金压铸件
变形镁及镁合金圆铸锭
印刷版基用铝板带
建筑用隔热铝合金型材 穿条式
高纯铝
手机及数码产品外壳用铝及铝合金板、带材
手机电池壳用铝合金板、带材
干式变压器用铝带、箔材
半导体器件键合用铝丝
铝及铝合金铸轧带材
变形镁及镁合金扁铸锭
镁合金焊丝
镁合金热挤压无缝管
镁及镁合金铸轧板材
铝合金建筑型材有机聚合物喷涂工艺技术规范
重熔用精铝锭
活塞裙用铝合金模锻件
电子行业机柜用铝合金板、带材
铝及铝合金深冲用板、带材
空调器散热片用铝箔 第1部分:基材
空调器散热片用铝箔 第2部分:涂层铝箔
衡器用铝合金挤压扁棒
天花吊顶用铝及铝合金板、带材
瓶盖用铝及铝合金板、带、箔材
表盘及装饰用铝及铝合金板
铝及铝合金彩色涂层板、带材
铝塑复合管用铝及铝合金带、箔材
铝合金衬塑复合管材与管件
铝合金中铜、铁、镁、锰、硅、钛、钒、锌和锆的测定 电感耦合等离子体原子发
射光谱法
进出口金属钠检验方法
汽车用铝合金板材
易拉罐盖料及拉环料用铝合金板、带材
电容器外壳用铝及铝合金带材
铝轧产品的尺寸公差
易拉罐罐体用铝合金带材
铝硬化剂的命名体系
铝轧产品的尺寸公差
铝金属基体复合材料的命名体系
电气钢性铝导管(ERAC)
铝材用合金和回火名称与符号注册系统
铝和铝合金.拉制方形管和矩形管.尺寸和形状公差
非合金铝的命名与符号系统
钛及钛合金的化学分析.用火焰原子吸收光谱法测定TA6V合金内铝、钒和铁的含量
钢铁.镀铝薄板.定尺长度和带卷
屋顶.铝或铝合金制线状型材
铝和铝合金.锻件.第2部分:机械性能和附加性能要求
铝和铝合金.通过熔化产生的母合金.规范
镁合金制半成品.矩型材挤制棒.尺寸和公差
铝和铝合金.液态金属.规范
镁和镁合金.镁和镁合金制阳极、锭和铸件.标识系统
铝和铝合金.废料.第10部分:使用过的铝制饮料罐组成的废料
铝和铝合金.废料.第14部分:旧的铝制包装件废料
铝及铝合金.锻造坯料.第2部分:机械性能
铝和铝合金.铸件.与食品接触的铸件的化学成分
铝和铝合金.废料.第8部分:铝分离工艺中切碎工艺产生的有色金属材料组成的废料
铝和铝合金.HF缝焊接管.第2部分:机械特性
铝和铝合金.HF缝焊接管.第4部分:正方型、长方型和定型管的形状和尺寸公差
铝和铝合金.薄板,带材和板材.第3部分:冷轧制品尺寸和形状公差
铝和铝合金.废料.第15部分:去除涂层的旧铝包装件废料
铝和铝合金.废料.第12部分:一种合金组成的车床切屑
铝和铝合金.HF缝焊接管.第1部分:检验和交货技术条件
铝和铝合金.废料.第11部分:铝铜散热器废料
铝和铝合金.锻制产品的化学成分和形状.第2部分:基于命名体系统的化学符号
铝和铝合金.废料.第9部分:有色金属切碎材料的铝分离工艺产生的废料
铝和铝合金.一般用途圆制品和圆坯.规格
镁和镁合金.镁合金锭和铸件
镁和镁合金.非合金镁
铝及铝合金.普通再轧坯料.第1部分:热轧制再轧坯料规范
镁和镁合金.铸造阳极用镁合金
铝和铝合金.锻造产品.生产压力设备用产品的特殊要求
铝和铝合金.薄板、带材和板材.第3部分:热轧制品的尺寸和形状公差
铝及铝合金.术语和定义.第2部分:化学分析
铝和铝合金.废料.第7部分:铸件组成的废料
铝和铝合金.结构铁路设备产品.检测和交货的技术条件.第2部分:板和薄板
铝和铝合金.废料.第5部分:同系列两种或多种锻造合金组成的废料
铝和铝合金.烹调器具生产用圆坯料.规范
铝和铝合金.生产包装和包装组件用产品的化学组分的特定要求
铝和铝合金.重熔、母合金和铸件用合金铝锭的命名.第2部分:基于命名系统的化学
符号
铝和铝合金.重熔、母合金和铸件用合金铝锭的命名.第1部分:数字命名系统
铝和铝合金.废料.第2部分:非合金铝废料
铝和铝合金.锻件.第3部分:尺寸和形式公差
铝和铝合金.再熔用非合金铝锭.规范
铝和铝合金.锻件.第1部分:检验和交货技术条件.
铝及铝合金.铸锻造坯料.第2部分:尺寸和形状公差(欧洲标准EN 604-2)
铝及铝合金.锻造坯料.第1部分:检验和交货技术条件
金属材料.关于产品质地的试验样品轴的命名
铝和铝合金.建筑铁路设施产品.检验和交货用技术条件.第3部分:铸件
铝和铝合金.铝合金无缝压力容器.等级.半成品：方坯
铝和铝合金.翅件.第3部分:尺寸和形状公差
铝和铝合金.施工工程用建筑产品.检验和交付技术条件
铝和铝合金.由锻制品获得冷挤压金属块.规范
铝和铝合金.翅件.第1部分:检验和交货的技术条件
铝和铝合金.箔材.第1部分:验收和交货的技术条件
铝和铝合金.箔材.第4部分:特殊性能要求
武器用热轧可焊接铝薄板.第2部分:燃烧试验法
铝和铝合金.箔材.第3部分:尺寸公差
铝和铝合金.锻制品的化学成分和形状.第5部分:标准锻制品汇编
铝和铝合金.拉线坯.第2部分:电气应用的专门要求
铝和铝合金.与食品接触的阳极化产物的要求
铝和铝合金.冷拉杆材/棒材和管材.第6部分:六角形棒材的尺寸和形状公差
铝和铝合金.冷拉杆材/棒材和管材.第1部分:检验和交付用技术条件
铝和铝合金.EN AW-6060和EN AW-6063挤制合金精密型材.第1部分:检验和交货
技术条件
铝和铝合金.冷拉杆材/棒材和管材.第7部分:无缝管的尺寸和形状公差
铝和铝合金.挤压杆材/棒材、管材和型材.第4部分:方形棒材的尺寸和形状公差
铝和铝合金.挤压杆材/棒材、管材和型材.第5部分:矩形棒材的尺寸和形状公差
铝和铝合金.冷拉杆材/棒材和管材.第4部分:方形棒材的尺寸和形状公差
铝和铝合金.冷拉杆材/棒材和管材.第5部分:矩形棒材的尺寸和形状公差
铝及铝合金.EN AW-6060和EN AW-6063挤制合金精密型材.第2部分:尺寸和形状
公差
铝和铝合金.挤压杆材/棒材、管材和型材.第2部分:机械性能
铝和铝合金.冷拉钢丝.第1部分:检验和交货技术条件
铝和铝合金.通用挤制圆形盘管.规范
铝和铝合金.薄板材、带材和厚板材.第2部分:机械性能
铝和铝合金.一般用途冷拉圆形盘管.规范
铝和铝合金.危险品存储和运输用容器的可焊接轧制品
铝和铝合金.冷拉杆材/棒材和管材.第3部分:圆棒材的尺寸和形状公差
屋顶.加筋或不加筋铝合金波形板
连续预涂漆铝带和铝板.要求
铝和铝合金.薄板材、带材和厚板材.第1部分:检验和交货技术条件
铝和铝合金.锻制产品.回火标志
铝及铝合金.试验方法.板材和带材的凸耳试验
铝和铝合金.拉制钢丝.第2部分:机械性能
铝和铝合金.废料.第1部分:一般要求、取样和试验
屋顶.铝合金加筋板.静力和动力试验
铝和铝合金.一般用途卷状圆挤制管.尺寸和形状公差
铝和铝合金.薄板材、带材和板材.第1部分:检验和交货技术条件
铝和铝合金.废料.第4部分:由一种可锻合金组成的废料
铝和铝合金.废料.第13部分:两种或多种合金组成的混合切屑
铝和铝合金.重熔、母合金和铸件用合金铝锭的命名.第3部分:化学成份的书写规则
铝和铝合金.罐、外壳和盖子用轧制产品.规范
铝和铝合金.拉拔丝材.第3部分:尺寸公差
镁合金制半成品.圆型材挤制棒.尺寸和公差
铝和铝合金.HF缝焊接管.第3部分:圆管的形状和尺寸公差
铸件.图像分析用平均截线的测量.硅含量5%-11%的铝铸件
铝及铝合金.术语和定义.第4部分:铝工业的残留物
铝和铝合金.通用彩色涂层的薄板材和带材.规范
铝和铝合金.箔材.第2部分:机械性能
铜和铜合金.切割钢带边缘区域残余应力的测定
连续预涂漆铝带和铝板.试验方法
镁合金制半成品.圆形挤制管.尺寸公差
镁和镁合金制半成品.回火标志
铝和铝合金.挤压杆材/棒材、管材和型材.第3部分:圆形棒材的尺寸和形状公差
铝及铝合金.普通再轧坯料.第2部分:冷轧制再轧坯料规范
铝及铝合金.术语和定义.第3部分:废料
铝和铝合金.挤压杆材/棒材、管材和型材.第6部分:六角形棒材的尺寸和形状公差
铝和铝合金.挤压杆材/棒材、管材和型材.第9部分:型材的尺寸和形状公差
铝和铝合金.挤压杆材/棒材、管材和型材.第1部分:检验和交货的技术条件
铝和铝合金.废料.第16部分:刮削、碎屑、小金属棒和金属器件组成的废料
武器用热轧可焊接铝薄板.第1部分:交货技术条件
铝和铝合金.术语和定义.第1部分:一般术语
铝和铝合金.废料.第3部分:导线和电缆废料
铝和铝合金.锻件.生产与食品接触的物品所需半成品的化学成分
铝和铝合金.冷拉棒材/杆材和管材.第8部分:带孔管材的尺寸和形状公差
铝和铝合金.翅件.第2部分:机械特性
铝和铝合金.挤压杆材/棒材、管材和型材.第7部分:无缝管的尺寸和形状公差
铝和铝合金.踏脚板.规范
铝及铝合金.铸锻造坯料.第1部分:检查和交货技术条件(欧洲标准EN 604-1)
铝和铝合金.冷拉杆材/棒材和管材.第2部分:机械性能
铝和铝合金.废料.第6部分:两种或多种可锻合金组成的废料
铝和铝合金.结构性铁路设施用产品.检查和交货的技术条件.第1部分:挤压制品
铝及铝合金.锻造锻坯.第3部分:尺寸和形状公差
镁合金铸件
镁合金压铸件
铸造用镁合金锭
压铸用镁合金锭
电气用未加工铝锭
铝和铝合金箔
铝和铝合金的原子吸收光谱分析方法
铝、镁及其合金.回火标识
勘误
铝和铝合金薄板材、带材和板材
铝和铝合金涂漆和烤漆薄板及带材
铝和铝合金杆材、棒材和丝材
铝和铝合金挤压管材和冷拔管材
镁合金薄板、板材、带材和卷材薄板
铝和铝合金中铍的测定方法
铝和铝合金挤压型材
镁合金棒
镁合金挤压型材
铝和铝合金中镓的测定方法
再生铝锭（修改件1）
铝及铝合金焊接管（修改件1）
镁合金无缝管
铝和铝合金箔（修改件1）
铝锭
再生铝锭
精铝锭
高纯度铝箔（修改件1）
硅钙合金
铝和铝合金锻件
铝和铝合金废料分类标准
高纯度铝箔
铝板制品
勘误
勘误
铝合金压铸件
钛及钛合金铸件
压铸用铝合金锭
勘误
镁合金薄板材平均粒度的测定方法
镁和镁合金中锡的测定方法
勘误
未加工的铝锭(修改件1)
镁和镁合金中铅的测定方法
勘误表
电气用未加工的铝锭(修改件1)
勘误表
勘误表
铝板制品(修改件1)
勘误表
勘误表
精铝锭(修改件1)
铝合金砂模铸件 参比试棒
加工铝和铝合金冷拉线材 第1部分:验收及交货的技术条件
铸造用铝合金锭
铝生产用碳素材料 单个材料的取样方案和取样 第1部分:阴极块
铝合金铸件 目视法评定针孔
铝合金铸件 X射线照相试验
铝合金的腐蚀.抗应力腐蚀裂纹的测定
加工铝和铝合金薄板、带、厚板 第2部分:力学性能
镁和镁合金.回炉料.要求、分类和验收
镁和镁合金.镁合金铸锭和铸件
铝生产用碳素材料 煅烧焦和煅烧碳产品 用艾氏卡法测定全硫含量
铝生产用碳素材料 电极用沥青 喹啉不溶物中C/H比的测定
铝生产用碳素材料 电极用沥青 挥发分的测定
铝生产用碳素材料 预焙阳极和阴极块 用比重瓶法测定二甲苯密度
镁和镁合金 纯镁 化学成分
铝生产用碳素材料 未煅烧和煅烧焦 火焰原子吸收光谱法测定痕量元素
铝生产用碳素材料 电极用生焦和煅烧焦 X射线荧光分析
加工铝和铝合金挤压棒/条材、管材和型材 第5部分:挤压圆形、正方形和六角形棒
材 尺寸和形状公差
加工铝和铝合金薄板、带、厚板 第1部分:交货和验收的技术条件
加工铝和铝合金 冷拉圆棒材 尺寸和形状公差(直径采用负公差)
铝生产用碳素材料 单个材料的取样方案和取样 第2部分:预焙阳极
加工铝和铝合金挤压棒/条材、管材和型材 第3部分：挤压矩形棒材 形状和尺寸公
差
加工铝和铝合金冷拉棒/条材和管材 第4部分:拉制矩形棒材 尺寸和形状公差
加工铝和铝合金冷拉棒/条材和管材 第1部分:验收及交货的技术条件
镁合金 圆棒材和管材 尺寸偏差
加工铝和铝合金薄板、带、厚板 第4部分:薄板和厚板 尺寸和形状公差
铝和铝合金.化学成分
铝和铝合金.重熔用合金铸锭.规范
镁和镁合金.铸件阳极用镁合金
铝和铝合金.铸件.化学成分和机械性能
镁合金砂模铸件 参比试棒
铝合金冷硬铸件 参比试棒
铝生产用碳素材料 电极用煅烧焦 颗粒电阻率的测定
加工铝和铝合金冷拉棒/条材和管材 第2部分:力学性能
加工铝和铝合金挤压棒/条材、管材和型材 第2部分:力学性能
加工铝和铝合金 拉制圆棒材 尺寸和形位(直径采用对称正负偏差)偏差
加工铝和铝合金挤压棒/条材、管材和型材 第1部分:验收和交货的技术条件
加工铝和铝合金挤压棒/条材、管材和型材 第4部分:挤压型材 尺寸和形状公差
铝和铝合金 箔材和薄带材 尺寸公差
重熔用非铝合金锭.分类及成分
主要用于铝生产的氧化铝.在300℃和1000℃时质量损失的测定
加工铝和铝合金薄板、带、厚板 第3部分:带材 尺寸和形状公差
镁和镁合金.镁合金铸锭和铸件.修改件1:附加合金
铝和铝合金.再熔炼用合金铸锭.规范.技术勘误1
铝和铝合金.锻造制品.回火号
加工铝和铝合金冷拉棒/条材和管材 第5部分:冷拉方形和六角形棒材 尺寸和形状公
差
铝生产用碳素材料 电极用生焦和煅烧焦 松(紧装)密度的测定
铝生产用碳素材料 煅烧焦 用实验室振动磨测定粒度稳定性
铝生产用碳素材料.单个材料的取样方案和取样.第3部分:侧墙砖
镁和镁合金.锻造的镁合金
热处理型铝镁硅系铝合金母线材料的建议
铝和铝合金.挤压锻坯料.第1部分:验收和交货技术条件
铝和铝合金.一般用途的粗轧带材.第1部分:热轧粗轧带材的规范
铝和铝合金.废料.第10部分:使用过的铝制饮料罐
铝和铝合金.废料.第16部分:浮渣、碎屑、小金属棒和金属碎粒废料
铝及铝合金.结构性铁路设施用制品.检验和交换用技术条件.第1部分:挤制产品
铝和铝合金.试验方法.薄板和带材的端部花边试验
铝和铝合金.重熔、母合金和铸件用合金铝锭的标识.第2部分:基于标识系统的化学
符号; 德文版本 EN 1780-2:2002
铝和铝合金.液态金属.规范; 德文版本 EN 577:1995
铝和铝合金.废料.第4部分:单一锻造合金废料
铝和铝合金.废料.第2部分:非合金铝废料
铝和铝合金.废料.第13部分:两种或多种合金混合车床切屑
镁和镁合金.镁合金锭和铸件
铝和铝合金.通用粗轧带材.第2部分:重轧铝胚料的规范
锌和锌合金.取样方法.规范
铝和铝合金.带材、薄板、板材.第3部分:冷轧制品尺寸形状公差
铝及铝合金.阳极化处理.第11部分:20? 、45?、60?或85度角阳极氧化层的镜面反
射系数和镜面光泽度测量
铝和铝合金.术语和定义.第1部分:一般术语.三种语言的版本
铝和铝合金.锻件.第3部分:尺寸和形状公差
铝及铝合金.阳极化处理.第12部分:用积算球光度表测量铝表面的反射特性
铝和铝合金.术语和定义.第4部分:铝工业的残留物
铝及铝合金.阳极氧化.第19部分:斑蚀评定等级系统.格栅法
铝和铝合金.废料.第8部分:铝分离用有色金属碎料
铝和铝合金.HF缝焊管.第1部分:检验和交货技术条件
铝和铝合金.废料.第9部分:有色金属碎料经铝分离处理后的剩余废料
铝和铝合金.普通绕涂板材和带材.规范
铝和铝合金.由锻制品获得冷挤压金属块.规范
铝和铝合金.铸件.与食品接触的铸件的化学成分
铝和铝合金.散热片坯料.第1部分:检验和交货技术条件
铝和铝合金.拉制钢丝.第3部分:尺寸公差.英文版本DIN EN 1301-3-2008
铝和铝合金.挤压杆材/棒材、管材和型材.第3部分:圆棒材的尺寸和形状公差
铝和铝合金.冷拉杆材/棒材和管材.第6部分:六角形棒材的尺寸和形状公差
铝和铝合金.锻制品的化学成分和形状.第5部分:标准锻制品汇编
铝和铝合金.冷拉杆材/棒材和管材.第4部分:方形钢的尺寸和形状公差
铝和铝合金.挤压杆材/棒材、管材和型材.第8部分:带孔管材的尺寸和形状公差
铝及铝合金.冷拉杆材/棒材和管材.第3部分:圆棒材的尺寸和形状公差
铝和铝合金.冷拉杆材/棒材和管材.第2部分:机械性能
铝和铝合金.拉制钢丝.第1部分:检验和交付用技术条件.英文版本DIN EN 1301-1-
2008
铝和铝合金.冷拉杆材/棒材和管材.第8部分:带孔管材的尺寸和形状公差
铝和铝合金.薄板材、带材和厚板材.第2部分:机械特性
铝和铝合金.拉拔坯料.第1部分:检验和交货的一般要求和技术条件
铝和铝合金.挤压杆材/棒材、管材和型材.第9部分:轮廓、尺寸和形状公差
铝和铝合金.废料.第15部分:去除涂层的用过的铝包装物废料
铝和铝合金.电工用薄板材,带材和板材,英文版本DIN EN 14121-2009-09
铝和铝合金.通过熔炼生产的母合金.规范; 德文版本 EN 575:1995
铝和铝合金.废料.第7部分:铸件废料
铝和铝合金.拉制坯料.第3部分:机械用特殊要求(不包括焊接)
铝和铝合金.废料.第1部分:一般要求、取样和试验
铝和铝合金.踏板.规范
铝和铝合金.挤压杆材/棒材、管材和型材.第6部分:六角形棒材的尺寸和形状公差
铝和铝合金.挤压杆材/棒材、管材和型材.第1部分:检验和交货技术条件
铝和铝合金.箔.第3部分:尺寸公差
铝和铝合金.拉制钢丝.第2部分:机械性能.英文版本DIN EN 1301-2-2008
铝和铝合金.EN AW-6060和EN AW-6063合金中挤压的精密型材.第1部分:检验和
交货技术条件
铝和铝合金.挤压杆材/棒材、管材和型材.第4部分:方形棒材的尺寸和形状公差
铝和铝合金.锻件.第1部分:交货技术要求
铝和铝合金.阳极处理.第10部分:用喷砂试验测量阳极化氧化涂层的特定平均耐磨
性能
铝和铝合金.锻制品.回火状态标识符号
铝和铝合金.废料.第14部分:旧的铝制包装件废料
铝和铝合金.拉拔坯料.第2部分:电器的特殊要求
铝和铝合金.通用挤制圆盘管.规范
铝和铝合金.重熔、母合金和铸件用合金铝锭的标识.第3部分:化学成分的书面规则;
德文版本 EN 1780-3:2002
铝和铝合金.轧制罐、塞子和盖子.规范
铝及铝合金.结构性铁路设施用制品的检验和交换用技术条件.第2部分:板和薄板
铝和铝合金.挤压杆材/棒材、管材和型材.第2部分:机械性能
铝和铝合金.冷拉杆材/棒材和管材.第1部分:检验和交货技术条件
铝和铝合金.危险货物的储存和运输用罐的可焊接轧制品
铝和铝合金.重熔、母合金和铸件用合金铝锭的标识.第1部分:数字标识系统; 德文
版本 EN 1780-1:2002
铝和铝合金.结构铁路设施用制品.检验和交换用技术条件.第3部分:铸件
铝和铝合金.拉拔坯料.第4部分:焊接用特殊要求
铝和铝合金.带材、薄板和板材.第3部分:热轧制品的尺寸和外形公差
铝和铝合金.冷拉杆材/棒材和管材.第5部分:矩形棒材的尺寸和形状公差
铝及铝合金.通用冷拉制圆盘管.规范
铝和铝合金.冷拉杆材/棒材和管材.第7部分:无缝管的尺寸和形状公差
铝和铝合金.箔.第2部分:机械性能
铝和铝合金.锻制产品的化学成分和外形.第3部分:产品的化学成分和外形.英文版本
DIN EN 573-3-2009-08
铝和铝合金.精锻制品的化学成分和形式.第2部分:基于标识系统的化学符号; 德文
版本 EN 573-2:1994
铝和铝合金.一般用途的圆片和圆片坯料.规范; 德文版本 EN 941:1995
铝和铝合金.挤压棍棒,管和截面图.第7部分:无缝管尺寸公差和形状,英文版本DIN
EN 755-7:2009-07
铝和铝合金.废料.第6部分:两种或多种锻造合金废料
铝和铝合金.再熔用非合金铝锭.规范
铝和铝合金.铸锻毛坯.第1部分:交货技术条件
铝和铝合金.术语和定义.第3部分:废料
铝和铝合金.热交换器坯料.第2部分:机械性能
铝和铝合金.锻造产品.压力设备生产装备特殊要求
铝和铝合金.铝制品的环境方面.标准中环境内容的一般导则
铝和铝合金.箔.第1部分:交货技术条件
铝和铝合金.铸件.化学成份和机械性能.德文版本EN 1706-2010
铝和铝合金.铸锻毛坯.第2部分:尺寸和形状公差
铝和铝合金.废料.第12部分:单一合金车床切屑
铝和铝合金.锻造坯料.第3部分:尺寸和形状公差
铝和铝合金.废料.第3部分:导线和电缆废料
铝和铝合金.锻造产品的化学成分和形状.第1部分:编号标识系统
铝和铝合金.挤压杆材/棒材、管材和型材.第5部分:矩形棒材的尺寸和形状公差
镁和镁合金.镁和镁合金阳极、锭坯和铸件.命名制度
铝和铝合金.HF缝焊管.第4部分:正方形、长方形和成形管的尺寸和形状公差
铝和铝合金.结构铁路设施用制品.检验和交换用技术条件.第4部分:锻制
铝和铝合金.锻件.第2部分:机械性能和补充性能要求; 德文版本 EN 586-2:1994
铝和铝合金.锻造加工坯料.第2部分:机械性能
铝和铝合金.废料.第5部分:同批两种或多种锻造合金废料
铝和铝合金.废料.第11部分:铝铜散热器废料
铝和铝合金.锻件.与食品接触的物品制造用半成品的化学成分
铝和铝合金.厨房器具生产用圆片和圆片坯料.规范; 德文版本 EN 851:1995
铝和铝合金.HF缝焊管.第2部分:机械性能
铝和铝合金.HF缝焊管.第3部分:圆管尺寸和形状公差
铝和铝合金.热交换器坯料.第3部分:公差、尺寸和形状
铝和铝合金.生产包装和包装组件用产品的化学组分的特定要求
铝和铝合金.箔.第4部分:特殊性能要求
铝和铝合金.EN AW-6060和EN AW-6063合金中挤压的精密型材.第2部分:尺寸和
形状公差
铝和铝合金.回炼用合金铝锭.规范.德文版本EN 1676-2010
铝和铝合金.施工作业用结构产品.检验和交付技术条件.德文版本EN 15088-2005
超导性.第3部分:电子特性测量.微波频率下超导体表面电阻
铝和铝合金.箔.第4部分:特殊性能要求
铝和铝合金.箔.第3部分:尺寸公差
奶制品容器用包覆铝箔和铝带规范.第1部分:玻璃容器用包覆铝箔
铝和铝合金.重熔用合金铸锭.规范
铝和铝合金.箔.第1部分:检验和交付用技术条件
铝和铝合金.锻件.尺寸和形状公差
飞行控制可调节终端配合铝合金杆.尺寸和荷载
制铝工业用炭素材料取样与试验方法.第2部分:电极用焦炭.第12节:碎焦粒度分布测
定
AL-P7009-T74511铝合金.对周边粗晶粒控制的a或D为125mm 挤压棒材和型材
铝和铝合金.挤压杆材/棒材、管材和型材.检验和交货技术条件
富镁合金的防腐蚀保护.规范
铝和铝合金.挤压杆材/棒材、管材和型材.圆棒材的尺寸和形状公差
铝和铝合金.绘图台.电气应用的特殊要求
铝和铝合金.通用卷绕涂层薄板材和带材.规范
铝和铝合金.锻造冲挤金属棒.规范
铝和铝合金.散热片坯料.第3部分:尺寸和形状公差
铝和铝合金.挤压的杆材/棒材、管材和型材.方棒材的尺寸和形状公差
铝及铝合金.EN AW-6060和EN AW-6063合金的挤压精密型材:检验和交付用技术
条件
铝和铝合金.冷拉杆材/棒材和管材.检验和交货用技术条件
铝和铝合金.挤压的杆材/棒材、管材和型材.矩形棒材的尺寸和形状公差
铝和铝合金.挤压的杆材/棒材、管材和型材.无缝管的尺寸和形状公差
铝和铝合金.冷拉杆材/棒材和管材.机械特性
铝和铝合金.一般用途的冷拉、圆形盘管.规范
铝和铝合金.挤压的杆材/棒材、管材和型材.出水孔管的尺寸和形状公差
铝和铝合金.薄板材、带材和厚板材.机械性能
铝和铝合金.线坯.第1部分:检验和交付的一般要求和技术条件
铝及铝合金试验方法.薄板材和带材的耳索试验
铝和铝合金.液体金属.规范
铝和铝合金.拉制坯料.机械用途(不包括焊接)特殊要求
AL-P7009-T74511铝合金.a或D≤125mm的挤压棒材和型材
铝和铝合金.术语和定义.化学分析
AL-P7075-T651铝合金.板材6mm＜a≤80mm
铝和铝合金.薄板材、带材和厚板材.检验和交货技术条件
铝及铝合金.再熔用的合金铸锭.规范
铝和铝合金.铸件.化学成分和机械特性
铝和铝合金.通用挤压圆盘管.规程
铝和铝合金.电工用薄板材,带材和厚板材
普通工程用锻造铝和铝合金规范(补充系列).第10部分:5454型冷拔管
镁及镁合金.非合金镁
铝和铝合金.圆形材料和圆坯料的通用要求.规范
铝-镁(1.0)-硅(0.6)-铜(0.28)-铬(0.2)合金管规范(溶液处理和人工时效:未经液压试
验)(厚度小于10mm)
锻铝和铝合金的检验、试验和验收程序
铝和铝合金.废料.同一系列两种或多种锻造合金的废料
铝和铝合金
铝和铝合金.结构性铁道设施用产品.检验和交货技术条件.锻制品
主要用于铝生产的氧化铝.在300鳦和1000鳦时质量损失的测定
铝和铝合金.金属罐、密封物和盖子用轧制品.规范
铝和铝合金的阳极氧化.阳极氧化涂层厚度测定.利用分裂光束显微镜的无损检测
镁和镁合金.锻造镁合金
铝和铝合金.拉制钢丝.检验和交付用技术条件
铝合金和锻铝合金硫酸阳极化规范
AL-P 7009-T74铝合金.20mm≤a≤150mm手工锻件
铝-铜-镁-硅-锰合金的整体冷锻制铆钉用金属线规范(用于溶解处理和自然老化状
态)(直径不超过10 mm)(Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)(2014A)
铝和铝合金产品试验方法.第1部分:锻铝合金电导率的测定
铝和铝合金铬硫酸液
铝合金锻坯和锻件规范.技术规范.一般要求
铝和铝合金.废料.铝铜散热器的废料
铝-镁(0.8)硅(1)-锰(0.7)合金板规范(溶液处理,拉伸控制及沉淀处理)(厚度小于
25mm)(适用于焊接)
铝和铝合金.踏板.规范
铝和铝合金.术语和定义.铝工业残留物
铝和铝合金的阳极氧化.阳极氧化涂层变形裂解耐受性评定
电气用锻铝.带拉拔或轧制边的带材
AL-P7075-T73511铝合金.a或D≤100mm的挤压棒材和型材
铝-镁(0.8)-硅(1)-锰(0.7)合金薄板材和带材规范(溶液处理和沉淀处理)(适用于焊接)
AL-P2014A T6或T62铝合金.0.4mm-6mm的薄板及带材
铝和铝合金.结构性轨道用制品.检验和交货技术条件.板材和薄板材
铝和铝合金.结构性铁路设施用产品.检验和交货用技术条件.铸件
铝及铝合金.合金EN AW-6060和EN AW-6063挤压的精密型材:尺寸和形状公差
铝和铝合金.挤压杆材/棒材、管材及型材.型材的尺寸和形状公差
铝和铝合金.铝制品的环境效应.标准中包含环境效应的一般指南
铝和铝合金.拉制钢丝.尺寸公差
铝及铝合金.铸锻件坯.尺寸和形位公差
铝和铝合金.废料.铝制废饮料罐的废料
铝-铜(4.4)-镁(1.5)-锰(0.6)合金铝涂层薄板材和带材规范(由用户进行溶液处理)
铝和铝合金.散热片坯料.第2部分:机械特性
铝和铝合金.废料.铸件废料
镁和镁合金.镁合金铸锭和铸件
铝和铝合金.结构性铁道制品.检验和交货技术条件.挤压制品
铝涂层铝-铜(4.4)-镁(0.5)-硅(0.8)-锰(0.8)合金薄板材和带材规范(固溶处理和人工
时效的)
铝和铝合金.危险品的存储和运输槽罐用可焊接轧制产品
99%铝管规范(冷拔:无缝:液压试验)(壁厚不超过12mm)
AL-P6082-T6铝合金.a或D≤200mm的挤压棒材和型材
铝和铝合金产品试验方法.第5部分:复合半成品的包层厚度和铜扩散的测定
镁及镁合金.铸造阳极用镁合金
铝和铝合金.第2部分:箔.机械性能
铝和铝合金.化学成分
铝和铝合金.冷拉杆材/棒材和管材.圆棒材的尺寸和形状公差
铝和铝合金.挤压杆材/棒材、管材和型材.机械性能
铝和铝合金.冷拉杆材/棒材和管材.出水孔管材尺寸和形状公差
铝和铝合金.包装和包装元件制造用产品的化学成分的专门要求
铝和铝合金.通用重轧胚料.热轧重轧胚料规范.
铝和铝合金.拉制钢丝.机械性能
铝-铜(4.4)-镁(1.5)-锰(0.6)合金铝涂层薄板和带材规范(溶液处理和室温时效)
铝和铝合金.废料.从粉碎的非铁材料中分离出的铝废料
AL-P7009-T7452铝合金.40mm≤a≤150mm的手工锻件
铝和铝合金.废料.废铝包装件
铝和铝合金.术语和定义.废料
铝和铝合金.施工作业用结构产品.检验和交付用技术条件
铝和铝合金的阳极氧化.点状腐蚀评估的评级系统.图版法
铝和铝合金.挤压的杆材/棒材、管材和型材.六角形棒材的尺寸和形状公差
铝-镀铝-铜(4.4)-镁(0.5)-硅(0.8)-锰合金紧公差薄板材和带材规范(固溶处理和人工
时效的)
电工用锻铝与铝合金规范.棒材、挤压圆管材和型材
制铝工业用炭素材料抽样和试验方法.第3部分:电极.第2节:阴极块和预焙阳极密度
测定
铝及铝合金.铸锻件坯.检查和交付技术状态
铝和铝合金.废料.浮渣、渣滓、疤皮和金属粒子的废料
铝和铝合金.废料.一般要求、取样和试验
铝和铝合金.通用重轧胚料.冷轧重轧胚料规范.
铝和铝合金.冷拉杆材/棒材和管材.方棒材的尺寸和形状公差
铝和铝合金.冷拉杆材/棒材和管材.无缝管尺寸和形状公差
铝和铝合金.海上(造船业,海运和近海工程)用煅造和铸造产品规范
铝-镁(0.8)硅(1)-锰(0.7)合金管规范(溶液处理和沉淀处理)(壁厚度小于10mm)(适用
于焊接)
铝和铝合金的阳极氧化.稀薄阳极氧化涂层连续性处理.硫酸铜试验
铝制造用炭素物的抽样和试验方法.电极焦炭.煅烧焦碳水含量的测定
铝合金AL-P6082-T6.对周边粗晶粒控制的挤压棒材和型材.a或D≤200mm,
采用硫酸处理工艺的钛和钛合金阳极涂层规范
铝和铝合金.薄板材、带材和板材.冷轧制品的形状和尺寸公差
铝及铝合金.锻坯.机械性能
铝和铝合金.废料.已去除废铝包装件中涂层的铝废料
铝和铝合金.废料.单一锻造合金的废料
铝和铝合金.锻件.与食品接触的产品制造用半成品的化学成分
铝和铝合金.化学分析.金属熔料抽样
铝和铝合金.锻压产品.生产压力设备用产品专门要求
铝和铝合金.叶片坯料.第1部分:检验和交付技术条件
铝和铝合金.锻制品.回火标志
铝和铝合金.线坯.第4部分:焊接应用的特殊要求
AL-P2014A-T4511铝合金.a或D≤200mm的挤压棒材和型材
铝和铝合金.再熔非合金铝锭.规范
99%铝板材和带材规范(强度符号-H14或H24)
铝和铝合金.冷拉杆材/棒材和管材.六角形棒材的尺寸和形状公差
铝和铝合金.锻制品的化学成分和形状.标准锻制品汇编
铝合金和锻铝合金铬酸阳极化规范
铝合金AL-P2024-T3511.对周边粗晶粒控制的1,2 mm 或D≤150mm挤压棒材和型
材.
铝合金2117通用头型实心铆钉.英制系列
铝和铝合金.熔铸母合金.规范
AL-P7075-T7351铝合金.6mm≤a或D≤75mm拉制棒材
铝及铝合金.锻坯.检验和交付技术状态
制铝工业用炭素材料取样与试验方法.第1部分:电极硬柏油脂.第12节:介晶相含量测
定
铝和铝合金.锻件.检验和交付技术状态
铝-镁(0.8)-硅(1)-锰(0.7)合金锻坯和锻件规范(溶液处理和沉淀处理)(适用于焊接)
铝-镁(1.0)-硅(0.6)-铜(0.28)-铬(0.2)合金管规范(溶液处理和人工时效:液压试验)(壁
厚度小于10mm)
铝-铜(4.4)-镁(0.5)-硅(0.7)-锰(0.8)合金管材规范(固溶处理和室温效)(壁厚度小于
10mm)
铝-铜(4.4)-镁(0.5)-硅(0.8)-锰(0.8)合金紧公差薄板材和带材规范(溶液处理和人工
时效)
镁-铝(6.0)-锌(1.0)合金棒材和挤压型材规范(直径不超过150mm或较小截面尺寸)
99.5%整体冷锻铆钉用铝丝规范(直径不超过10mm)
铝-镁合金板材和带材规范(强度符号-H16或H2)
铝和铝合金.再熔、母合金和铸件的非合金和合金铝锭的命名.化学成份的书写规则
铝和铝合金.废料.含两种或多种合金的混合车床切屑
规范.铝-锌(5.6)-镁(2.5)-铜(1.6)-铬(0.22)合金冷压手工锻件(溶液处理和人工时效至
过老化条件)
铝和铝合金.铸件.与食品接触用铸件的化学成分
铝和铝合金.片材、带材和板材.热轧制品的形状和尺寸公差
AL-P2014-T6511铝合金.a或D≤150mm的挤压棒材和型材
铝和铝合金.废料.含两种或多种锻造铝合金的废料
AL-P2024-T3511铝合金.1,2mm≤a或D≤150mm的挤压棒材和型材
铝和铝合金.锻件.机械特性和附加特性要求
铝和铝合金.术语和定义.通用术语
铝和铝合金.废料.为实施铝分离加工，含粉碎加工产生的 非铁材料废料
铝和铝合金.废料.废金属丝和电缆
铝和铝合金.废料.非合金废铝
铝和铝合金.废料.单一合金的车床切屑
铝及铝合金.锻坯.尺寸和形状公差
铝和铝合金.锻制产品化学组成和外形.数字标示系统
AL-P 7009-T74铝合金.3mm≤a≤150mm模锻件
铝及铝合金拉制六角形棒材.公差等级h11.对边宽度为7mm a 50mm.尺寸
铝和铝合金.再熔、母合金和铸件用非合金和合金铝锭的命名.用化学符号表示命名
系统
铝和铝合金.再熔、母合金和铸件的非合金和合金铝锭的命名.数字命名系统
铝和铝合金.锻制品.烹调器具用圆形材料和圆坯料规范
镁和镁合金.回炉料.要求、分类和验收
铝基和镁基铸锭和铸件的检验、试验和验收程序
铝-铜(4.4)-镁(0.5)-硅(0.7)-锰(0.8)合金棒材和挤压型材规范(固溶处理和人工时
效)(直径不超过200mm或较小的截面尺寸)
铝和铝合金.锻制产品的化学成分和外形.基于化学标志的命名系统
铝涂层铝-铜(4.4)-镁(0.5)-硅(0.8)-锰(0.8)合金紧公差薄板材和带材规范(溶液处理
和室温时效)
铝-镁合金板材和带材规范(强度符号-H12或H22)
铝-镁合金板材和带材规范(强度符号-0)
99%铝锻坯、棒材、挤压型材和锻件规范
99%铝板材和带材规范(强度符号-0)
铝-铜(5.0)-镍(1.5)-锰(0.5)-钛(0.2)-锆(0.2)-钴(0.2)-锑(0.2)合金铸锭和铸件规范(溶
液处理和人工时效)
铝和铝合金.废料.第10部分:使用过的铝制饮料罐
铝和铝合金.废料.第16部分:浮渣、碎屑、小金属棒和金属碎粒废料
铝和铝合金.一般用途的粗轧带材.第1部分:热轧粗轧带材的规范
铝和铝合金.废料.第4部分:单一锻造合金废料
铝和铝合金.废料.第2部分:非合金铝废料
铝和铝合金.废料.第13部分:两种或多种合金混合车床切屑
铝和铝合金.通用粗轧带材.第2部分:重轧铝胚料的规范
铝和铝合金.术语和定义.第1部分:一般术语.三种语言的版本
锌和锌合金.取样方法.规范
铝及铝合金.阳极化处理.第11部分:20? 、45?、60?或85度角阳极氧化层的镜面反
射系数和镜面光泽度测量
铝和铝合金.术语和定义.第4部分:铝工业的残留物
铝及铝合金.阳极氧化.第19部分:斑蚀评定等级系统.格栅法
铝及铝合金.阳极化处理.第12部分:用积算球光度表测量铝表面的反射特性
铝和铝合金.废料.第8部分:铝分离用有色金属碎料
铝和铝合金.废料.第9部分:有色金属碎料经铝分离处理后的剩余废料
铝和铝合金.拉制钢丝.第3部分:尺寸公差.英文版本DIN EN 1301-3-2008
铝及铝合金.结构性铁路设施用制品.检验和交换用技术条件.第1部分:挤制产品
铝和铝合金.拉制钢丝.第1部分:检验和交付用技术条件.英文版本DIN EN 1301-1-
2008
铝和铝合金.普通绕涂板材和带材.规范
铝和铝合金.废料.第15部分:去除涂层的用过的铝包装物废料
挤压镁型材.允许偏差
开关设备.汇流条用挤压槽形铝型材
铝和铝合金.电工用薄板材,带材和板材,英文版本DIN EN 14121-2009-09
铝和铝合金.废料.第1部分:一般要求、取样和试验
铝和铝合金.踏板.规范
铝和铝合金.拉制钢丝.第2部分:机械性能.英文版本DIN EN 1301-2-2008
铝和铝合金.EN AW-6060和EN AW-6063合金中挤压的精密型材.第1部分:检验和
交货技术条件
电工用铝.第2部分:管、杆/棒和型材.交货技术条件
铝和铝合金.废料.第7部分:铸件废料
铝和铝合金.废料.第14部分:旧的铝制包装件废料
铝和铝合金.阳极处理.第10部分:用喷砂试验测量阳极化氧化涂层的特定平均耐磨
性能
锻造铝和锻造铝合金的阳极氧化产品 交货技术条件
铝和铝合金.通用挤制圆盘管.规范
铝及铝合金.结构性铁路设施用制品的检验和交换用技术条件.第2部分:板和薄板
铝及铝合金.通用冷拉制圆盘管.规范
铝和铝合金.结构铁路设施用制品.检验和交换用技术条件.第3部分:铸件
镁压制型材.第2部分:设计
铝和铝合金.危险货物的储存和运输用罐的可焊接轧制品
铝和铝合金.废料.第6部分:两种或多种锻造合金废料
铝和铝合金.锻造产品.压力设备生产装备特殊要求
铝和铝合金.术语和定义.第3部分:废料
铝和铝合金.废料.第3部分:导线和电缆废料
镁半成品.性能
铁路车辆用半成品.可锻铝合金棒材、型材及薄板.第1部分:选择
铝和铝合金.结构铁路设施用制品.检验和交换用技术条件.第4部分:锻制
铝和铝合金.废料.第12部分:单一合金车床切屑
锻造镁合金
镁挤出型材.交货技术条件
铝和铝合金.废料.第5部分:同批两种或多种锻造合金废料
铝和铝合金.生产包装和包装组件用产品的化学组分的特定要求
铁路车辆用半成品.铝型材.横档
铝和铝合金.废料.第11部分:铝铜散热器废料
铝和铝合金.施工作业用结构产品.检验和交付技术条件.德文版本EN 15088-2005
铝和铝合金.EN AW-6060和EN AW-6063合金中挤压的精密型材.第2部分:尺寸和
形状公差
铝和铝合金.锻件.第1部分:交货技术要求
铝和铝合金.挤压杆材/棒材、管材和型材.第4部分:方形棒材的尺寸和形状公差
铝和铝合金.重熔、母合金和铸件用合金铝锭的标识.第3部分:化学成分的书面规则;
德文版本 EN 1780-3:2002
铝和铝合金.轧制罐、塞子和盖子.规范
铝和铝合金.精锻制品的化学成分和形式.第2部分:基于标识系统的化学符号; 德文
版本 EN 573-2:1994
铝和铝合金.挤压杆材/棒材、管材和型材.第2部分:机械性能
铝和铝合金.拉拔坯料.第2部分:电器的特殊要求
铝和铝合金.重熔、母合金和铸件用合金铝锭的标识.第1部分:数字标识系统; 德文
版本 EN 1780-1:2002
铝和铝合金.一般用途的圆片和圆片坯料.规范; 德文版本 EN 941:1995
铝和铝合金.拉拔坯料.第4部分:焊接用特殊要求
铝和铝合金.带材、薄板和板材.第3部分:热轧制品的尺寸和外形公差
铝和铝合金.冷拉杆材/棒材和管材.第5部分:矩形棒材的尺寸和形状公差
铝和铝合金.挤压棒材、管材和型材.第8部分:带孔管材的尺寸和形状公差.技术勘误
DIN EN 755-8-2008
铝和铝合金.冷拉杆材/棒材和管材.第1部分:检验和交货技术条件
铝和铝合金.冷拉杆材/棒材和管材.第7部分:无缝管的尺寸和形状公差
铝和铝合金.锻制产品的化学成分和外形.第3部分:产品的化学成分和外形.英文版本
DIN EN 573-3-2009-08
铝和铝合金.箔.第2部分:机械性能
铝和铝合金.挤压棍棒,管和截面图.第7部分:无缝管尺寸公差和形状,英文版本DIN
EN 755-7:2009-07
铝和铝合金.再熔用非合金铝锭.规范
铝和铝合金.热交换器坯料.第2部分:机械性能
铝和铝合金.箔.第1部分:交货技术条件
铝和铝合金.铝制品的环境方面.标准中环境内容的一般导则
铝和铝合金.铸锻毛坯.第1部分:交货技术条件
铝和铝合金.铸锻毛坯.第2部分:尺寸和形状公差
铝和铝合金.锻造坯料.第3部分:尺寸和形状公差
铝和铝合金.铸件.化学成份和机械性能.德文版本EN 1706-2010
铝和铝合金.HF缝焊管.第4部分:正方形、长方形和成形管的尺寸和形状公差
铝和铝合金.锻造产品的化学成分和形状.第1部分:编号标识系统
铝和铝合金.厨房器具生产用圆片和圆片坯料.规范; 德文版本 EN 851:1995
镁和镁合金.镁和镁合金阳极、锭坯和铸件.命名制度
铝和铝合金.锻件.第2部分:机械性能和补充性能要求; 德文版本 EN 586-2:1994
铝和铝合金.锻件.与食品接触的物品制造用半成品的化学成分
铝和铝合金.锻造加工坯料.第2部分:机械性能
铝和铝合金.热交换器坯料.第3部分:公差、尺寸和形状
铝和铝合金.挤压杆材/棒材、管材和型材.第5部分:矩形棒材的尺寸和形状公差
铝和铝合金.HF缝焊管.第2部分:机械性能HF缝焊管.第2部分:机械性能
铝和铝合金.箔.第4部分:特殊性能要求
铝和铝合金.HF缝焊管.第3部分:圆管尺寸和形状公差
铝和铝合金.带材、薄板和板材.第2部分:机械性能.回火牌号比较
铝和铝合金.回炼用合金铝锭.规范.德文版本EN 1676-2010
铝和铝合金.挤压锻坯料.第1部分:验收和交货技术条件
铝和铝合金.试验方法.薄板和带材的端部花边试验
铝和铝合金.液态金属.规范; 德文版本 EN 577:1995
镁和镁合金.镁合金锭和铸件
铝和铝合金.重熔、母合金和铸件用合金铝锭的标识.第2部分:基于标识系统的化学
符号; 德文版本 EN 1780-2:2002
铝和铝合金.锻件.第3部分:尺寸和形状公差
铝和铝合金.HF缝焊管.第1部分:检验和交货技术条件
铝和铝合金.带材、薄板、板材.第3部分:冷轧制品尺寸形状公差
铝和铝合金.铸件.与食品接触的铸件的化学成分
碳质材料测试.未烧结和煅烧焦炭.火焰原子吸收光谱法测定痕量元素
铝和铝合金.散热片坯料.第1部分:检验和交货技术条件
铝和铝合金.挤压杆材/棒材、管材和型材.第8部分:带孔管材的尺寸和形状公差
铝和铝合金.由锻制品获得冷挤压金属块.规范
铝和铝合金.拉制坯料.第3部分:机械用特殊要求(不包括焊接)
铝和铝合金.挤压杆材/棒材、管材和型材.第3部分:圆棒材的尺寸和形状公差
铝和铝合金.冷拉杆材/棒材和管材.第6部分:六角形棒材的尺寸和形状公差
铝和铝合金.冷拉杆材/棒材和管材.第8部分:带孔管材的尺寸和形状公差
铝和铝合金.拉拔坯料.第1部分:检验和交货的一般要求和技术条件
铝和铝合金.锻制品的化学成分和形状.第5部分:标准锻制品汇编
铝和铝合金.冷拉杆材/棒材和管材.第4部分:方形钢的尺寸和形状公差
铝及铝合金.冷拉杆材/棒材和管材.第3部分:圆棒材的尺寸和形状公差
铝和铝合金.冷拉杆材/棒材和管材.第2部分:机械性能
铝和铝合金.挤压杆材/棒材、管材和型材.第9部分:轮廓、尺寸和形状公差
铝和铝合金.薄板材、带材和厚板材.第2部分:机械特性
铝和铝合金 挤压杆材/棒材、管材和型材 第2部分:机械性能 技术勘误DIN EN 755-
2-2008-06
铝和铝合金.通过熔炼生产的母合金.规范; 德文版本 EN 575:1995
铝和铝合金.挤压杆材/棒材、管材和型材.第9部分:型材尺寸和形状公差.技术勘误
DIN EN 755-9-2008-06
铝和铝合金.箔.第3部分:尺寸公差
铝和铝合金.挤压杆材/棒材、管材和型材.第6部分:六角形棒材的尺寸和形状公差
铝和铝合金.挤压杆材/棒材、管材和型材.第1部分:检验和交货技术条件
铝和铝合金.锻制品.回火状态标识符号
金属型铸造铝合金的使用UNS A13560和A03570.第VIII节,第1部分
规范施工用3003-H24铝合金.第VIII节,第1部分
热水加热锅炉制造用T6回火A356.0砂型铸造铝合金的使用.第IV节
非焊接施工用铝合金EN AW-6082-T6配件.第VIII节,第1部分
热水供应锅炉生产中F回火砂型铝合金EN AC-AlSi10Mg(a)的使用.第HC部分第IV
节.补充件8&9
规范施工用铝合金(铝-6.3镁).第VIII节,第1部分 补充件8&9
生产供热锅炉用半永久模造铝合金A356.0的使用.第HC部分.第IV节(已作废)(补充
件12)
1级核组件用6061-T6和6061-T651铝合金的使用.第III节,第1部分;已作废;补充件7
补充件7
供热锅炉施工用第IV节第HF部分中SB-209 5052-H32回火铝合金的使用.第IV和II-
B节;(补充件11)
铝和铝合金薄板和板材用规范.ASTM B209-96
铝和铝合金拉制无缝管用规范.ASTM B210-95
拉制无缝铝和铝合金管的规范
铝和铝合金棒材、杆材和线材用规范.ASTM B211-99
铝及铝合金挤压棒材
铝和铝合金压制棒材、杆材和型材用规范.ASTM B221-96
冷凝器和热交换器用铝和铝合金拉制无缝管规范.ASTM B234-95
铝及铝合金箔
铝和铝合金无缝管道和无缝挤压管材用规范.ASTM B241/B241M-99
镁及镁合金板、带材
铝合金6061-T6标准结构剖面用规范.ASTM B308/B308M-96
建筑用隔热铝合金型材
铝及铝合金拉(轧)制无缝管
不可膨胀战术掩体的标准规范
锌铜铝合金压模铸件规范
拉制铝和铝合金无缝管的标准规范(米制)
锻造及压模铸用锌铝合金铸锭规范
通用铝和铝合金挤制圆管的标准规范
热浸涂层锌5%铝混合稀土合金(UNS Z38510)铸锭规范
铝和铝合金挤压棒材、杆材、线材、型材和管材用标准规范(米制)
铝及铝合金棒材、条材和线材(米制)标准规范
连入泡沫和梁型可移动遮蔽物的铝合金制备的标准实施规程
锌铝合金铸造和压模铸件规范
检验铝铸件的标准数字参考图像
铝和铝合金薄板材和板材的标准规范
用破坏载荷法测定可热处理铝合金制品的抗应力腐蚀开裂特性的标准试验方法
镁合金压模铸件的标准规范
钢铁制造用铝标准规范
电镀用镁和镁合金制备的标准指南
非应力消除铝制品的平面应力断裂强度试验的标准导则
电工用挤制铝合金棒、条、杆及结构型材(汇流导体)标准规范
铝和铝合金压模锻件、手工锻件和轧制环形锻件的标准规范
热浸涂层用锭铁模型中GALFAN(锌-5%铝-含铈稀土)合金的标准规范
由各种浇铸工艺制成的铸锭和熔化型材用铝合金标准规范
铝合金厚板用热轧钢机溶解热处理的标准实施规范
锻造和铸造铝-镁合金产品抗拉性能的标准试验方法
铝及铝合金焊接圆管的标准规范
6061-T6型铝合金标准结构轮廓用标准规范
薄铝合金制品剪切试验的标准试验方法
冷凝器及热交换器用铝和铝合金拉制无缝管的标准规格
铝合金的剪切测试用标准试验方法
铝和铝合金薄板材和板材(米制)的标准规范
光谱化学分析用镁和镁合金取样的标准实施规程
铝合金砂模铸件标准规范
锻造和铸造铝-镁合金产品抗拉性能的标准试验方法[米制]
用原子发射光谱法分析铝和铝合金的标准试验方法
电工用耐热铝锆合金丝的标准规格
波纹铝管用铝合金薄板的标准规范
阴极保护用镁合金阳极的标准规范
铝生产用预焙阳极的取样计划和芯取样的标准指南
铪和铪合金带材、薄板材和厚板材的标准规范
镁合金熔模铸件的标准规范
制作锌压模合金用铝合金硬化剂的标准规范
砂型铸件、硬模铸件和压模铸件铸锭用镁合金的标准规范
单面可膨胀战术掩体的标准规范
电容器用铝箔标准规范
拉制无缝铝和铝合金管的标准规范
镁合金挤压制棒材、条材、型材、管材和线材的标准规格
铝和铝合金铆钉和冷镦合金线材和棒材标准规范
海上服务和类似环境用高镁铝合金薄板材和板材的标准规范
铝和铝合金成形和弧焊圆管的标准规范
铝、铝合金和铝包层钢电缆屏蔽材料标准规范
铝合金链环栅栏结构
冷凝器及热交换器用铝和铝合金拉制无缝管的标准规格(公制)
镁合金锻件的标准规范
用原子发射光谱法分析镁和镁合金的标准试验方法
锻造铝合金的热处理用标准实施规程
铝和镁合金产品的标准术语
用物理测量法对制铝工业用加工的阳极和阴极碳表观密度进行测量的标准试验方
法
镁合金薄板和中厚板的标准规范
铝合金轧制支撑板的标准规范
镁合金的热处理标准实施规范
铝合金挤压结构管和管件的标准规范
用X射线荧光法测定金属基体上钛处理重量的标准试验方法
铝及铝合金无缝管和挤压制无缝管的标准规格
与食品接触的和其它用途的挠性包装材料用退火铝及铝合金箔标准规范
双面可膨胀战术掩体的标准规范
镁合金永久铸模铸件用标准规范
T1、T2、T5、和T10型回火产品的梯度温度成形加工的冷挤压铝合金的标准规范
铝及铝合金挤压制条、棒、线、管和型材标准规范
真空镀膜用纯铝(未掺杂质)原材料标准规范
铝合金断裂韧性试验的标准实施规程
无缝铝合金管的电磁检验用的标准化设备
铝及镁制品的封装／包装的标准规范
铝及铝合金无缝管和挤压制无缝管的标准规范
电镀用铝合金的制备标准指南
电子薄膜器件用纯铝(非合金)原材料标准规范
铝及铝合金棒材、条材和线材标准规范
用恒电流测量铝及其合金的再钝化电位的标准试验方法
勘误表
铝和铝合金压模锻件、手工锻件和轧制环形锻件的标准规范(米制)
际标准号查询
英文名
General specification for sandwich panels of shelters
Test method for laboratory evaluation of magnesium sacrificial anode test specimens for underground
applications
Aluminium alloy reel of thread for textile tricot machines
Aluminium rare-earth alloy ingot for remelting
Aluminium sheet for dial plates and ornaments
Methods for chemical analysis of barium-silicon—The perchloric acid dehydration gravimetric method
for the determination of silicon content
Aluminum master alloy ingots
Rules for the inspection of magnesium ingots for export
Alumina
High purity aluminum
Aluminium alloys webster hardness standard test method
Aluminium alloy laminated foil for brazing type heater exchanger
Aluminium and aluminium alloys grain refiners Part 1: AI-Ti-B wire
Aluminium and aluminium alloy bus conductors
Welding wire matched to aluminum alloy extruded profiles for railroad vechicle structures
Aluminium and aluminium-alloy roll-casting strip
Aluminium foil for air conditioner Part 2 : Hydrophilic aluminium foil
Aluminium alloy tube for quarrying machine
Wrought aluminium alloy profiles for architecture with combined coatings of anodic oxide and
colorated organic coatings
Aluminium foil for cable
Aluminium and aluminum alloys—Coil coated sheet and strip
Aluminium strip for aluminium-plastic composite panel
Sodium fluoride
Aluminium and aluminium alloys sheets and strips with decorative pattern
Flux for wrought aluminium and aluminium alloy
Eliment additive for aluminium and aluminium alloy
The extruded rods of 4A11、4032 alloy for piston
Aluminium and aluminium alloy rolled sheet for washing machine
Magnesium alloy extruded tube
Aluminium alloy foil for brazing type heat exchanger
Wrought aluminium and aluminium alloys columniform ingots
Grain-refining aluminium ingots
Rules for the inspection of magnesium granules for export
Aluminium foil for air conditioner Part 1 : Untreated aluminium foil
Method for the determination of sodium metal for metal for import and export
Aluminum alloy rods for colliery pillar
Aluminium alloy composited sheet for brazing
Aluminium coiled sheet for foil (thickness
Magnesium and magnesium alloys extruded rectangular bars
Wrought aluminium and aluminium alloys rectangle ingots
Insulating aluminum alloy profile with thermal barrier strip for construction
High purity aluminum
Method for the determination of sodium metal for metal for import and export
Dimensional Tolerances for Aluminum Mill Products
Designation System for Aluminum Hardeners
Dimensional Tolerances for Aluminum Mill Products
Nomenclature System for Aluminum Metal Matrix Composite Materials
Electrical Rigid Aluminum Conduit (ERAC)
Alloy and Temper Designation Systems for Aluminum
Aluminium and aluminium alloys. Square and rectangular drawn tubes. Dimensions and form
tolerances.
Designation System for Unalloyed Aluminum
Chemical analysis of titanium and titanium alloys. Detemination of aluminium, vanadium and iron
contents in the TA6V alloy by flame atomic absorption spectrophotometry.
Iron and steel. Aluminium coated sheet. Cut lengths and coils.
Roof covering. Aluminium or aluminium-alloy shaped linear elements.
Aluminium and aluminium alloys. Forgings. Part 2 : mechanical properties and additional property
requirements.
Aluminium and aluminium alloys. Master alloys produced by melting. Specifications.
Semi-finished products made of magnesium alloys. Rectangular section exruded bars. Dimensions
and tolerances.
Aluminium and aluminium alloys. Liquid metal. Specifications.
Magnesium and magnesium alloys. Magnesium and magnesium alloy anodes, ingots and castings.
Designation system.
Aluminium and aluminium alloys - Scrap - Part 10 : scrap consisting of used aluminium beverage
cans.
Aluminium and aluminium alloys - Scrap - Part 14 : scrap from post-consumer aluminium packagings.
Aluminium and aluminium alloys. Wrought forging stock. Part 2 : mechanical properties.
Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with
foodstuff.
Aluminium and aluminium alloys - Scrap - Part 8 : scrap consisting of non-ferrous materials from
shredding processes destined to aluminium separation processes.
Aluminium and aluminium alloys. HF seam welded tubes. Part 2 : mechanical properties.
Aluminium and aluminium alloys. HF seam welded tubes. Part 4 : tolerances on dimensions and form
for square, rectangular and shaped tubes.
Aluminium and aluminium alloys. Sheet, strip and plate. Part 4 : tolerances on shape and dimensions
for cold-rolled products.
Aluminium and aluminium alloys - Scrap - Part 15 : decoated aluminium scrap from post-consumer
aluminium packagings.
Aluminium and aluminium alloys - Scrap - Part 12 : turnings consisting of one single alloy.
Aluminium and aluminium alloys. HF seam welded tubes. Part 1 : technical conditions for inspection
and delivery.
Aluminium and aluminium alloys - Scrap - Part 11 : scrap consisting of aluminium-copper radiators.
Aluminium and aluminium alloys. Chemical composition and form of wrought products. Part 2 :
chemical symbol based designation system.
Aluminium and aluminium alloys - Scrap - Part 9 : scrap from aluminium separation processes of non-
ferrous shredded materials.
Aluminium and aluminium alloys. Circle and circle stock for general applications. Specifications.
Magnesium and magnesium alloys. Magnesium alloy ingots and castings.
Magnesium and magnesium alloys. Unalloyed magnesium.
Aluminium and aluminium alloys. Reroll stock for general applications. Part 1 : specifications for hot-
rolled reroll stock.
Magnesium and magnesium alloys. Magnesium alloys for cast anodes.
Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for
the production of pressure equipment.
Aluminium and aluminium alloys - Sheet, strip and plate - Part 3 : tolerances on dimensions and form
for hot-rolled products.
Aluminium and aluminium alloys - Terms and definitions - Part 2 : chemical analysis.
Aluminium and aluminium alloys - Scrap - Part 7 : scrap consisting of castings.
Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions
for inspection and delivery - Part 2 : plates and sheets.
Aluminium and aluminium alloys - Scrap - Part 5 : scrap consisting of two or more wrought alloys of
the same series.
Aluminium and aluminium alloys. Circle and circle stock for the production of culinary utensils.
Specifications.
Aluminium and aluminium alloys - Specific requirements on the chemical composition of products
intended to be used for the manufacture of packaging and packaging components.
Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys
and castings - Part 2 : chemical symbol based designation system.
Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys
and castings - Part 1 : numerical designation system.
Aluminium and aluminium alloys - Scrap - Part 2 : unalloyed aluminium scrap.
Aluminium and aluminium alloys - Forgings - Part 3 : tolerances on dimensions and form.
Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications.
Aluminium and aluminium alloys. Forgings. Part 1 : technical conditions for inspection and delivery.
Aluminium and aluminium alloys. Cast forging stock. Part 2 : tolerances on dimensions and form.
Aluminium and aluminium alloys. Wrought forging stock. Part 1 : technical conditions for inspection
and delivery.
Metallic materials - Designation of test specimen axes in relation to product texture.
Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions
for inspection and delivery - Part 3 : castings.
Aluminium and aluminium alloys. Seamless pressure vessels aluminium alloys. Grades. Half-product :
billets.
Aluminium and aluminium alloys - Finstock - Part 3 : tolerances on dimensions and form.
Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for
inspection and delivery.
Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products -
Specification.
Aluminium and aluminium alloys - Finstock - Part 1 : technical conditions for inspection and delivery.
Aluminium and aluminium alloys - Foil - Part 1 : technical conditions for inspection and delivery.
Aluminium and aluminium alloys - Foil - Part 4 : special property requirements.
Hot-rolled weldable aluminium sheets for armouring - Part 2 : firing tests method.
Aluminium and aluminium alloys - Foil - Part 3 : tolerances on dimensions.
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5 :
codification of standardized wrought products.
Aluminium and aluminium alloys - Drawing stock - Part 2 : specific requirements for electrical
applications.
Aluminium and aluminium alloys - Requirements for anodised products for use in contact with
foodstuff.
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6 : hexagonal bars, tolerances
on dimensions and form.
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1 : technical conditions for
inspection and delivery.
Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063
- Part 1 : technical conditions for inspection and delivery.
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7 : seamless tubes, tolerances
on dimensions and form.
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 4 : square bars,
tolerances on dimensions and form.
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5 : rectangular bars,
tolerances on dimensions and form.
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4 : square bars, tolerances on
dimensions and form.
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5 : rectangular bars, tolerances
on dimensions and form.
Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063
- Part 2 : tolerances on dimensions and form.
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2 : mechanical properties.
Aluminium and aluminium alloys - Drawn wire - Part 1 : technical conditions for inspection and
delivery.
Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification.
Aluminium and aluminium alloys - Sheet, strip and plate - Part 2 : mechanical properties.
Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications -
Specification.
Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and
transportation of dangerous goods.
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3 : round bars, tolerances on
dimensions and form.
Roofing materials. Corrugated or ribbed aluminium alloy plates.
Strips and sheets made from continuous prelacquered aluminium. Requirements.
Aluminium and aluminium alloys - Sheet, strip and plate - Part 1 : technical conditions for inspection
and delivery.
Aluminium and aluminium alloys. Wrought products. Temper designations.
Aluminium and aluminium alloys. Test methods. Earing test for sheet and strip.
Aluminium and aluminium alloys - Drawn wire - Part 2 : mechanical properties.
Aluminium and aluminium alloys - Scrap - Part 1 : general requirements, sampling and tests.
Roof covering. Aluminium alloy ribbed sheets. Static and dynamic bend tests.
Aluminium and aluminium alloys. Round extruded tubes in coils for general purpose. Dimensions and
form tolerances.
Aluminium and aluminium alloys - Sheet, strip and plate - Part 1 : technical conditions for inspection
and delivery.
Aluminium and aluminium alloys - Scrap - Part 4 : scrap consisting of one single wrought alloy.
Aluminium and aluminium alloys - Scrap - Part 13 : mixed turnings consisting of two or more alloys.
Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys
and castings - Part 3 : writing rules for chemical composition.
Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications.
Aluminium and aluminium alloys - Drawn wire - Part 3 : tolerances on dimensions.
Semi-finished products made of magnesium alloys. Round section extruded bars. Dimensions and
tolerances.
Aluminium and aluminium alloys. HF seam welded tubes. Part 3 : tolerances on dimensions and form
for circular tubes.
Founding - Measurement of the mean intercept using image analysis - Aluminium castings with a 5 to
11 content % of silicium.
Aluminium and aluminium alloys - Terms and definitions - Part 4 : residues of the aluminium industry.
Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications.
Aluminium and aluminium alloys - Foil - Part 2 : mechanical properties.
Copper and copper alloys - Determination of residual stresses in the border area of slit strip.
Strip and sheets made from continuous prelacquered aluminium. Methods of tests.
Semi-finished products made of magnesium alloys. Round extruded tubes. Dimensional tolerances.
Semi-finished products made of magnesium and magnesium alloys. Temper designation.
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3 : round bars, tolerances
on dimensions and form.
Aluminium and aluminium alloys. Reroll stock for general applications. Part 2 : specifications for cold-
rolled reroll stock.
Aluminium and aluminium alloys - Terms and definitions - Part 3 : scrap.
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 6 : hexagonal bars,
tolerances on dimensions and form.
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9 : profiles, tolerances on
dimensions and form.
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1 : technical conditions for
inspection and delivery.
Aluminium and aluminium alloys - Scrap - Part 16 : scrap consisting of skimmings, drosses, spills and
metallics.
Hot-rolled weldable aluminium sheets for armouring - Part 1 : technical delivery conditions.
Aluminium and aluminium alloys. Terms and definitions. Part 1 : general terms.
Aluminium and aluminium alloys - Scrap - Part 3 : wire and cable scrap.
Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products
used for the fabrication of articles for use in contact with foodstuff.
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8 : porthole tubes, tolerances on
dimensions and form.
Aluminium and aluminium alloys - Finstock - Part 2 : mechanical properties.
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7 : seamless tubes,
tolerances on dimensions and form.
Aluminium and aluminium alloys - Tread plate - Specifications.
Aluminium and aluminium alloys. Cast forging stock. Part 1 : technical conditions for inspection and
delivery.
Aluminium and aluminium drawn rod/bar and 2:mechanical properties.
Aluminium and aluminium alloys - Scrap - Part 6 : scrap consisting of two or more wrought alloys.
Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions
for inspection and delivery - Part 1 : extruded products.
Aluminium and aluminium alloys - Wrought forging stock - Part 3 : tolerances on dimensions and form.
Magnesium alloy castings
Magnesium alloy die castings
Magnesium alloy ingots for castings
Magnesium alloy ingots for die castings
Virgin aluminium ingots for electrical purposes
Aluminium and aluminium alloy foils
Methods for atomic absorption spectrometric analysis of aluminium and aluminium alloys
Aluminium, magnesium and their alloys -- Temper designation
ERRATUM
Aluminium and aluminium alloy sheets, strips and plates
Painted and baked aluminium and aluminium alloy sheets and strips
Aluminium and aluminium alloy rods, bars and wires
Aluminium and aluminium alloys extruded tubes and cold-drawn tubes
Magnesium alloy sheets, plates, strips and coiled sheets
Methods for determination of beryllium in aluminium and aluminium alloys
Aluminium and aluminium alloy extruded shape
Magnesium alloy bars
Magnesium alloy extruded shapes
Method for determination of gallium in aluminium and aluminium alloys
Secondary aluminium ingots (Amendment 1)
Aluminium and aluminium alloy welded pipes and tubes (Amendment 1)
Magnesium alloy seamless pipes and tubes
Aluminium and aluminium alloy foils (Amendment 1)
Virgin aluminium ingots
Secondary aluminium ingots
Refined aluminium ingots
High purity aluminium foils (Amendment 1)
Calcium silicon
Aluminium and aluminium alloy forgings
Classification standard of aluminium and aluminium alloy scraps
High purity aluminium foils
Aluminium sheet wares
ERRATUM
ERRATUM
Aluminium alloy die castings
Titanium and titanium alloy castings
Aluminium alloy ingots for die castings
ERRATUM
Methods for determining average grain size of magnesium alloy sheets
Methods for determination of tin in magnesium and magnesium alloys
ERRATUM
Virgin aluminium ingots (Amendment 1)
Methods for determination of lead in magnesium and magnesium alloys
ERRATUM
Virgin Aluminium Ingots for Electrical Purposes (Amendment 1)
ERRATUM
ERRATUM
Aluminium sheet wares (Amendment 1)
ERRATUM
ERRATUM
Refined Aluminium Ingots (Amendment 1)
Aluminium alloy sand castings; Reference test bar
Wrought aluminium and aluminium alloy cold-drawn wire; part 1: technical conditions for inspection
and delivery
Aluminium alloy ingots for castings
Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from
individual units - Part 1: Cathode blocks
Aluminium alloy castings; visual method for assessing the porosity
Aluminium alloy castings; radiography testing
Corrosion of aluminium alloys - Determination of resistance to stress corrosion cracking
Wrought aluminium and aluminium alloy sheets, strips and plates; part 2: mechanical properties
Magnesium and magnesium alloys - Returns - Requirements, classification and acceptance
Magnesium and magnesium alloys - Magnesium alloy ingots and castings
Carbonaceous materials used in the production of aluminium - Calcined coke and calcined carbon
products - Determination of total sulfur by the Eschka method
Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of
C/H ratio in the quinoline-insoluble fraction
Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of
volatile matter content
Carbonaceous materials used for the production of aluminium - Cathode blocks an prebacked anodes
- Determination of the density in xylene by a pyknometric method
Magnesium and magnesium alloys - Unalloyed magnesium - Chemical composition
Carbonaceous materials for use in the production of aluminium - Green and calcined coke -
Determination of trace elements by flame atomic absorption spectroscopy
Carbonaceous materials used in the production of aluminium - Green coke and calcined coke for
electrodes - Analysis using an X-ray fluorescence method
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles - Part 5: Extruded
round, square and hexagonal bars; Tolerances on shape and dimensions
Wrought aluminium and aluminium alloy sheets, strips and plates; Part 1 : Technical conditions for
inspection and delivery
Wrought aluminium and aluminium alloys - Drawn round bars - Tolerances on shape and dimensions
(All minus tolerances on diameter)
Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from
individual units - Part 2: Prebaked anodes
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles - Part 3: Extruded
rectangular bars; Tolerances on shape and dimensions
Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes; part 4: drawn rectangular
bars; tolerances on form and dimensions
Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes; part 1: technical conditions
for inspection and delivery
Magnesium alloys; Round bars and tubes; Dimensional tolerances
Wrought aluminium and aluminium alloy sheets, strips and plates; part 4: sheets and plates;
tolerances on shape and dimensions
Aluminium and aluminium alloys - Chemical composition
Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications
Magnesium and magnesium alloys - Magnesium alloys for cast anodes
Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties
Magnesium alloy sand castings; Reference test bar
Aluminium alloy chill castings; Reference test bar
Carbonaceous materials for the production of aluminium - Calcined coke for electrodes -
Determination of the electrical resistivity of granules
Wrought aluminium and aluminium alloy; cold-drawn rods/bars and tubes; part 2: mechanical
properties
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles; part 2: mechanical
properties
Wrought aluminium and aluminium alloys; Drawn round bars; Tolerances on shape and dimensions
(Symmetric plus and minus tolerances on diameter)
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles; Part 1 : Technical
conditions for inspection and delivery
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles; part 4: extruded
profiles; tolerances on shape and dimensions
Aluminium and aluminium alloys; Foil and thin strip; Dimensional tolerances
Unalloyed aluminium ingots for remelting - Classification and composition
Aluminium oxide primarily used for the production of aluminium - Determination of loss of mass at 300
°C and 1000 °C
Wrought aluminium and aluminium alloy sheets, strips and plates; Part 3 : Strips; Tolerances on
shape and dimensions (Previously referenced DIS 8219)
Magnesium and magnesium alloys - Magnesium alloy ingots and castings; Amendment 1: Additional
alloys
Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications; Technical
Corrigendum 1
Aluminium and aluminium alloys - Wrought products - Temper designations
Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes; part 5: drawn square and
hexagonal bars; tolerances on form and dimensions
Carbonaceous materials for the production of aluminium - Green coke and calcined coke for
electrodes - Determination of bulk density (tapped)
Carbonaceous materials for use in the production of aluminium - Calcined coke - Determination of
grain stability using a laboratory vibration mill
Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from
individual units - Part 3: Sidewall blocks
Magnesium and magnesium alloys - Wrought magnesium alloys
Recommendation for heat-treated aluminium alloy busbar material of the aluminium-magnesium-
silicon type; Corrigendum 1
Aluminium and aluminium alloys - Wrought forging stock - Part 1: Technical conditions for inspection
and delivery; German version EN 603-1:1996
Aluminium and aluminium alloys - Reroll stock for general applications - Part 1: Specifications for hot
rolled reroll stock; German version EN 12482-1:1998
Aluminium and aluminium alloys - Scrap - Part 10: Scrap consisting of used aluminium beverage
cans; German version EN 13920-10:2003
Aluminium and aluminium alloys - Scrap - Part 16: Scrap consisting of skimmings, drosses, spills and
metallics; German version EN 13920-16:2003
Aluminium and aluminium alloys - Products for structural railway applications; Technical conditions for
inspection and delivery - Part 1: Extruded products; German version EN 13981-1:2003
Aluminium and aluminium alloys - Test methods - Earing test for sheet and strip; German version EN
1669:1996
Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys
and castings - Part 2: Chemical symbol based designation system; German version EN 1780-2:2002
Aluminium and aluminium alloys - Liquid metal - Specifications; German version EN 577:1995
Aluminium and aluminium alloys - Scrap - Part 4: Scrap consisting of one single wrought alloy;
German version EN 13920-4:2003
Aluminium and aluminium alloys - Scrap - Part 2: Unalloyed aluminium scrap; German version EN
13920-2:2003
Aluminium and aluminium alloys - Scrap - Part 13: Mixed turnings consisting of two or more alloys;
German version EN 13920-13:2003
Magnesium and magnesium alloys - Magnesium alloy ingots and castings; German version EN
1753:1997
Aluminium and aluminium alloys - Reroll stock for general applications - Part 2: Specifications for cold
rolled reroll stock; German version EN 12482-2:1998
Zinc and zinc alloys - Method of sampling - Specifications; German version EN 12060:1997
Aluminium and aluminium alloys; sheet, strip and plate; part 4: tolerances on shape and dimensions
for cold-rolled products; German version EN 485-4:1993
Aluminium and aluminium alloys - Anodizing - Part 11: Measurement of specular reflectance and
specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60° or 85°; German version EN
Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms; Trilingual version EN
12258-1:1998
Aluminium and aluminium alloys - Forgings - Part 3: Tolerances on dimensions and form; German
version EN 586-3:2001
Aluminium and aluminium alloys - Anodizing - Part 12: Measurement of reflectance characteristics of
aluminium surfaces using integrating-sphere instruments; German version EN 12373-12:2000
Aluminium and aluminium alloys - Terms and definitions - Part 4: Residues of the aluminium industry;
Trilingual version EN 12258-4:2004
Aluminium and aluminium alloys - Anodizing - Part 19: Rating system for the evaluation of pitting
corrosion; Grid method; German version EN 12373-19:2001
Aluminium and aluminium alloys - Scrap - Part 8: Scrap consisting of non-ferrous materials from
shredding processes destined to aluminium separation processes; German version EN 13920-8:2003
Aluminium and aluminium alloys - HF seam welded tubes - Part 1: Technical conditions for inspection
and delivery; German version EN 1592-1:1997
Aluminium and aluminium alloys - Scrap - Part 9: Scrap from aluminium separation processes of non-
ferrous shredded materials; German version EN 13920-9:2003
Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications;
English version of DIN EN 1396:2007-04
Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products -
Specification; English version of DIN EN 570:2007-04
Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with
foodstuff; German version EN 601:2004
Aluminium and aluminium alloys - Finstock - Part 1: Technical conditions for inspection and delivery;
English version of DIN EN 683-1:2007-03
Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions; English version of
DIN EN 1301-3:2008-12
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3: Round bars, tolerances
on dimensions and form; English version of DIN EN 755-3:2008-06
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances
on dimensions and form; English version of DIN EN 754-6:2008-06
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5:
Codification of standardized wrought products; English version of DIN EN 573-5:2007-11
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on
dimensions and form; English version of DIN EN 754-4:2008-06
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes,
tolerances on dimensions and form; English version of DIN EN 755-8:2008-06
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on
dimensions and form; English version of DIN EN 754-3:2008-06
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties;
English version of DIN EN 754-2:2008-06
Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and
delivery; English version of DIN EN 1301-1:2008-12
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on
dimensions and form; English version of DIN EN 754-8:2008-06
Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties; English
version of DIN EN 485-2:2009-01
Aluminium and aluminium alloys - Drawing stock - Part 1: General requirements and technical
conditions for inspection and delivery; German version EN 1715-1:2008
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on
dimensions and form; English version of DIN EN 755-9:2008-06
Aluminium and aluminium alloys - Scrap - Part 15: Decoated aluminium scrap from post-consumer
aluminium packagings; German version EN 13920-15:2003
Aluminium and aluminium alloys - Sheet, strip and plate for electrotechnical applications; English
version of DIN EN 14121:2009-09
Aluminium and aluminium alloys - Master alloys produced by melting - Specifications; German version
EN 575:1995
Aluminium and aluminium alloys - Scrap - Part 7: Scrap consisting of castings; German version EN
13920-7:2003
Aluminium and aluminium alloys - Drawing stock - Part 3: Specific requirements for mechanical uses
(excluding welding); German version EN 1715-3:2008
Aluminium and aluminium alloys - Scrap - Part 1: General requirements, sampling and tests; German
version EN 13920-1:2003
Aluminium and aluminium alloys - Tread plate - Specifications; English version of DIN EN 1386:2008-
05
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 6: Hexagonal bars,
tolerances on dimensions and form; English version of DIN EN 755-6:2008-06
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions
for inspection and delivery; English version of DIN EN 755-1:2008-06
Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions; English version of DIN EN
546-3:2007-03
Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties; English version of DIN
EN 1301-2:2008-12
Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063
- Part 1: Technical conditions for inspection and delivery; English version of DIN EN 12020-1:2008-06
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 4: Square bars,
tolerances on dimensions and form; English version of DIN EN 755-4:2008-06
Aluminium and aluminium alloys - Forgings - Part 1: Technical conditions for inspection and delivery;
German version EN 586-1:1997
Aluminium and aluminium alloys - Anodizing - Part 10: Measurement of mean specific abrasion
resistance of anodic oxidation coatings using an abrasive jet test apparatus; German version EN
Aluminium and aluminium alloys; wrought products; temper designations; German version EN
515:1993
Aluminium and aluminium alloys - Scrap - Part 14: Scrap from post-consumer aluminium packagings;
German version EN 13920-14:2003
Aluminium and aluminium alloys - Drawing stock - Part 2: Specific requirements for electrical
applications; German version EN 1715-2:2008
Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification;
German version EN 13957:2008
Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys
and castings - Part 3: Writing rules for chemical composition; German version EN 1780-3:2002
Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications; English
version of DIN EN 541:2007-03
Aluminium and aluminium alloys - Products for structural railway applications, Technical conditions for
inspection and delivery - Part 2: Plates and sheets; German version EN 13981-2:2004
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties;
English version of DIN EN 755-2:2008-06
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for
inspection and delivery; English version of DIN EN 754-1:2008-06
Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and
transportation of dangerous goods; German version EN 14286:2008
Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys
and castings - Part 1: Numerical designation system; German version EN 1780-1:2002
Aluminium and aluminium alloys - Products for structural railway applications, Technical conditions for
inspection and delivery - Part 3: Castings; German version EN 13981-3:2006
Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding
applications; German version EN 1715-4:2008
Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form
for hot-rolled products; German version EN 485-3:2003
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances
on dimensions and form; English version of DIN EN 754-5:2008-06
Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications -
Specification; German version EN 13958:2008
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances
on dimensions and form; English version of DIN EN 754-7:2008-06
Aluminium and aluminium alloys - Foil - Part 2: Mechanical properties; English version of DIN EN 546-
2:2007-03
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3:
Chemical composition and form of products; English version of DIN EN 573-3:2009-08
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 2:
Chemical symbol based on designation system; German version EN 573-2:1994
Aluminium and aluminium alloys - Circle and circle stock for general applications - Specifications;
German version EN 941:1995
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes,
tolerances on dimensions and form; English version of DIN EN 755-7:2009-07
Aluminium and aluminium alloys - Scrap - Part 6: Scrap consisting of two or more wrought alloys;
German version EN 13920-6:2003
Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications; German
version EN 576:2003
Aluminium and aluminium alloys - Cast forging stock - Part 1: Technical conditions for inspection and
delivery; German version EN 604-1:1997
Aluminium and aluminium alloys - Terms and definitions - Part 3: Scrap; Trilingual version EN 12258-
3:2003
Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties; English version of DIN EN
683-2:2007-03
Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for
the production of pressure equipment; German version EN 12392:2000
Aluminium and aluminium alloys - Environmental aspects of aluminium products - General guidelines
for their inclusion in standards; German version EN 15530:2008
Aluminium and aluminium alloys - Foil - Part 1: Technical conditions for inspection and delivery;
English version of DIN EN 546-1:2007-03
Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties;
German version EN 1706:2010
Aluminium and aluminium alloys - Cast forging stock - Part 2: Tolerances on dimensions and form;
German version EN 604-2:1997
Aluminium and aluminium alloys - Scrap - Part 12: Turnings consisting of one single alloy; German
version EN 13920-12:2003
Aluminium and aluminium alloys - Wrought forging stock - Part 3: Tolerances on dimensions and
form; German version EN 603-3:2000
Aluminium and aluminium alloys - Scrap - Part 3: Wire and cable scrap; German version EN 13920-
3:2003
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1:
Numerical designation system; German version EN 573-1:2004
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5: Rectangular bars,
tolerances on dimensions and form; English version of DIN EN 755-5:2008-06
Magnesium and magnesium alloys - Magnesium and magnesium alloy anodes, ingots and castings -
Designation system; German version EN 1754:1997
Aluminium and aluminium alloys - HF seam welded tubes - Part 4: Tolerances on dimensions and
form for square, rectangular and shaped tubes; German version EN 1592-4:1997
Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions
for inspection and delivery - Part 4: Forgings; English version of DIN EN 13981-4:2007-02
Aluminium and aluminium alloys - Forgings - Part 2: Mechanical properties and additional property
requirements; German version EN 586-2:1994
Aluminium and aluminium alloys - Wrought forging stock - Part 2: Mechanical properties; German
version EN 603-2:1996
Aluminium and aluminium alloys - Scrap - Part 5: Scrap consisting of two or more wrought alloys of
the same series; German version EN 13920-5:2003
Aluminium and aluminium alloys - Scrap - Part 11: Scrap from aluminium-copper radiators; German
version EN 13920-11:2003
Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products
used for the fabrication of articles for use in contact with foodstuff; German version EN 602:2004
Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils -
Specifications; German version EN 851:1995
Aluminium and aluminium alloys - HF seam welded tubes - Part 2: Mechanical properties; German
version EN 1592-2:1997
Aluminium and aluminium alloys - HF seam welded tubes - Part 3: Tolerances on dimensions and
form for circular tubes; German version EN 1592-3:1997
Aluminium and aluminium alloys - Finstock - Part 3: Tolerances on dimensions and form; English
version of DIN EN 683-3:2007-03
Aluminium and aluminium alloys - Specific requirements on the chemical composition of products
intended to be used for the manufacture of packaging and packaging components; German version
Aluminium and aluminium alloys - Foil - Part 4: Special property requirements; English version of DIN
EN 546-4:2007-03
Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063
- Part 2: Tolerances on dimensions and form; English version of DIN EN 12020-2:2008-06
Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications; German version EN
1676:2010
Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for
inspection and delivery; English version of DIN EN 15088:2006-03
Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of
superconductors at microwave frequencies
Aluminium and aluminium alloys - Foil - Part 4: Special property requirements
Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions
Specification for aluminium capping foil and strip for dairy product containers - Aluminium capping foil
for glass containers
Aluminium and aluminium alloys. Alloyed ingots for remelting. Specifications
Aluminium and aluminium alloys - Foil - Part 1: Technical conditions for inspection and delivery
Aluminium and aluminium alloys - Forgings - Tolerances on dimensions and form
Rod bodies, flight control in aluminium alloy, for adjustable end fittings - Dimensions and loads
Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode
coke - Determination of particle size distribution of fine coke
Aluminium alloy AL-P7009-T74511 - Extruded bars and sections a or D 125 mm with peripheral
coarse grain control
Aluminium andaluminium alloys —Extruded rod/bar, tubeand profiles —Part 1: Technical conditions
forinspection and delivery
Protection of magnesium-rich alloys against corrosion - Specification
Aluminium andaluminium alloys —Extruded rod/bar, tubeand profiles —Part 3: Round bars,
tolerances ondimensions and form
Aluminium and aluminium alloys - Drawing stock - Part 2:Specific requirements for electrical
applications
Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products -
Specification
Aluminium and aluminium alloys - Finstock - Part 3: Tolerances on dimensions and form
Aluminium andaluminium alloys —Extruded rod/bar, tubeand profiles —Part 4: Square bars,
tolerances ondimensions and form
Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-
6063: Technical conditions for inspection and delivery
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Technical conditions for inspection
and delivery
Aluminium andaluminium alloys —Extruded rod/bar, tubeand profiles —Part 5: Rectangular bars,
tolerances ondimensions and form
Aluminium andaluminium alloys —Extruded rod/bar, tubeand profiles —Part 7: Seamless tubes,
tolerances ondimensions and form
Aluminium andaluminium alloys —Cold drawn rod/barand tube —Part 2: Mechanical properties
Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications -
Specification
Aluminium andaluminium alloys —Extruded rod/bar, tubeand profiles —Part 8: Porthole tubes,
tolerances ondimensions and form
Aluminium and aluminium alloys - Sheet, strip and plate - Part 2:Mechanical properties
Aluminium and aluminium alloys - Drawing stock - Part 1:General requirements and technical
conditions for inspection and delivery
Aluminium and aluminium alloys - Test methods - Earing test for sheet and strip
Aluminium and aluminium alloys - Liquid metal - Specifications
Aluminium and aluminium alloys - Drawing stock - Part 3:Specific requirements for mechanical uses
(excluding welding)
Aluminium alloy AL-P7009-T74511 - Extruded bars and sections a or D 125 mm
Aluminium and aluminium alloys - Terms and definitions - Chemical analysis
Aluminium alloy AL-P7075-T651 - Plate 6 mm a 80 mm
Aluminium and aluminium alloys - Sheet, strip and plate - Technical conditions for inspection and
delivery
Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications
Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties
Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification
Aluminium and aluminium alloys - Sheet, strip and plate for electrotechnical applications
Wrought aluminium and aluminium alloys for general engineering purposes (supplementary series) -
5454 Drawn tube
Magnesium and magnesium alloys - Unalloyed magnesium
Aluminium and aluminium alloys - Circle and circle stock for general applications - Specifications
Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy (solution treated and
artificially aged: not tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr
Procedure for inspection, testing and acceptance of wrought aluminium and aluminium alloys
Aluminium and aluminium alloys - Scrap - Scrap consisting of two or more wrought alloys of the same
series
Aluminium and aluminium alloys
Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions
for inspection and delivery - Forgings
Aluminium oxide primarily used for the production of aluminium - Determination of loss of mass at 300
?C and 1 000 ?C
Aluminium and aluminium alloys — Rolled products for cans, closures and lids — Specifications
Anodizing of aluminium and its alloys. Determination of thickness of anodic oxidation coatings. Non-
destructive measurement by split-beam microscope
Magnesium and magnesium alloys. Wrought magnesium alloys
Aluminium and aluminium alloys - Drawn wire - Part 1:Technical conditions for inspection and delivery
Specification for sulfuric acid anodizing of aluminium and wrought aluminium alloys
Aluminium alloy AL-P7009-T74 - Hand forgings 20 mm a 150 mm
Specification for wire for solid cold-forged rivets of aluminium-copper-magnesium-silicon-manganese
alloy (for use in the solution treated and naturally aged condition) (not exceeding 10 mm diameter)
Test methods for aluminium and aluminium alloy products - Determination of electrical conductivity of
wrought aluminium alloys
Chromic-sulphuric acid pickle of aluminium and aluminium alloys
Specification for aluminium alloy forging stock and forgings - Technical specification - General
requirements
Aluminium and aluminium alloys - Scrap - Scrap consisting of aluminium-copper radiators
Specification for plate of aluminium-magnesium-silicon-manganese alloy (solution treated, controlled
stretched and precipitation treated) (not exceeding 25 mm thickness) (suitable for welding) (Mg 0.8, Si
Aluminium and aluminium alloys - Tread plate - Specifications
Aluminium and aluminium alloys - Terms and definitions - Residues of the aluminium industry
Anodizing of aluminium and its alloys. Assessment of resistance of anodic oxidation coatings to
cracking by deformation
Specification for wrought aluminium for electrical purposes - Strip with drawn or rolled edges
Aluminium alloy AL-P7075-T73511 - Extruded bars and sections a or D 100 mm
Specification for sheet and strip of aluminium-magnesium-silicon-manganese alloy (solution treated
and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
Aluminium alloy AL-P2014A T6 or T62 - Sheet and strip - 0,4 mm a 6 mm
Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions
for inspection and delivery - Plates and sheets
Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions
for inspection and delivery - Castings
Aluminium andaluminium alloys —Extruded precisionprofiles in alloysEN AW-6060 andEN AW-6063
—Part 2: Tolerances on dimensions andform
Aluminium andaluminium alloys —Extruded rod/bar, tubeand profiles —Part 9: Profiles, tolerances
ondimensions and form
Aluminium and aluminium alloys - Environmental aspects of aluminium products - General guidelines
for their inclusion in standards
Aluminium and aluminium alloys - Drawn wire - Tolerances on dimensions
Aluminium and aluminium alloys - Cast forging stock - Tolerances on dimensions and form
Aluminium and aluminium alloys - Scrap - Scrap consisting of used aluminium beverage cans
Specification for aluminium-coated sheet and strip of aluminium-copper-magnesium-manganese alloy
(supplied for solution treatment by the user) (Cu 4.4, Mg 1.5, Mn 0.6)
Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties
Aluminium and aluminium alloys - Scrap - Scrap consisting of castings
Magnesium and magnesium alloys - Magnesium alloy ingots and castings
Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions
for inspection and delivery - Extruded products
Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-
manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
Aluminium andaluminium alloys— Weldable rolledproducts for tanksfor the storage andtransportation
ofdangerous goods
Specification for tube of 99% aluminium (cold drawn: seamless: tested hydraulically) (not exceeding
12 mm wall thickness)
Aluminium alloy AL-P6082-T6 - Extruded bars and sections a or D 200 mm
Test methods for aluminium and aluminium alloy products - Determination of cladding thickness and
copper diffusion of clad semi-finished products
Magnesium and magnesium alloys - Magnesium alloys for cast anodes
Aluminium and aluminium alloys - Part 2: Foil - Mechanical properties
Aluminium and aluminium alloys - Chemical composition
Aluminium andaluminium alloys —Cold drawn rod/barand tube —Part 3: Round bars, tolerances
ondimensions and form
Aluminium andaluminium alloys —Extruded rod/bar, tubeand profiles —Part 2: Mechanical properties
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Porthole tubes, tolerances on
dimensions and form
Aluminium and aluminium alloys. Specific requirements on the chemical composition of products
intended to be used for the manufacture of packaging and packaging components
Aluminium and aluminium alloys - Reroll stock for general applications - Specifications for hot rolled
reroll stock
Aluminium and aluminium alloys -Part 2:Drawn wire - Mechanical properties
Specification for aluminium-coated sheet and strip of aluminium-copper-magnesium-manganese alloy
(solution treated and aged at room temperature) (Cu 4.4, Mg 1.5, Mn 0.6)
Aluminium and aluminium alloys - Scrap - Scrap from aluminium separation processes of non-ferrous
shredded materials
Aluminium alloy AL-P7009-T7452 - Hand forgings 40 mm a 150 mm
Aluminium and aluminium alloys - Scrap - Scrap from post-consumer aluminium packagings
Aluminium and aluminium alloys - Terms and definitions - Scrap
Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for
inspection and delivery
Anodizing of aluminium and its alloys. Rating system for the evaluation of pitting corrosion. Chart
method
Aluminium andaluminium alloys —Extruded rod/bar, tubeand profiles —Part 6: Hexagonal bars,
tolerances ondimensions and form
Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-
silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
Specification for wrought aluminium and aluminium alloys for electrical purposes. Bars, extruded
round tube and sections
Methods of sampling and test for carbonaceous materials used in aluminium manufacture -
Electrodes - Determination of density of cathode blocks and prebaked anodes
Aluminium and aluminium alloys - Cast forging stock - Technical conditions for inspection and delivery
Aluminium and aluminium alloys - Scrap - Scrap consisting of skimmings, drosses, spills and metallics
Aluminium and aluminium alloys - Scrap - General requirements, sampling and tests
Aluminium and aluminium alloys - Reroll stock for general applications - Specifications for cold rolled
reroll stock
Aluminium andaluminium alloys —Cold drawn rod/barand tube —Part 4: Square bars, tolerances
ondimensions and form
Aluminium andaluminium alloys —Cold drawn rod/barand tube —Part 7: Seamless tubes,
toleranceson dimensions and form
Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications
(shipbuilding, marine and offshore)
Specification for tube of aluminium-magnesium-silicon-manganese alloy (solution treated and
precipitation treated) (not exceeding 10 mm wall thickness) (suitable for welding) (Mg 0.8, Si 1, Mn
Anodizing of aluminium and its alloys. Check for continuity of thin anodic oxidation coatings. Copper
sulfate test
Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode
coke - Determination of water content of calcined coke
Aluminium alloy AL-P6082-T6 - Extruded bars and sections a or D 200 mm with peripheral coarse
grain control
Specification for anodic coating of titanium and titanium alloys by the sulphuric acid process
Aluminium and aluminium alloys - Sheet, strip and plate - Tolerances on shape and dimensions for
cold-rolled products
Aluminium and aluminium alloys - Wrought forging stock - Mechanical properties
Aluminium and aluminium alloys - Scrap - Decoated aluminium scrap from post-consumer aluminium
packagings
Aluminium and aluminium alloys - Scrap - Scrap consisting of one single wrought alloy
Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products
used for the fabrication of articles for use in contact with foodstuff
Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts
Aluminium and aluminium alloys. Wrought products. Special requirements for products intended for
the production of pressure equipment
Aluminium and aluminium alloys. Finstock. Part 1: Technical conditions for inspection and delivery
Aluminium and aluminium alloys - Wrought products - Temper designations
Aluminium and aluminium alloys - Drawing stock - Part 4:Specific requirements for welding
applications
Aluminium alloy AL-P2014A-T4511 - Extruded bars and sections a or D 200 mm
Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications
Specification for sheet and strip of 99% aluminium (temper designation H14 or H24)
Aluminium andaluminium alloys —Cold drawn rod/barand tube —Part 6: Hexagonal bars,
toleranceson dimensions and form
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Codification
of standardized wrought products
Specification for chromic acid anodizing of aluminium and wrought aluminium alloys
Aluminium alloy AL-P2024-T3511 - Extruded bars and sections 1,2 mm a or D 150 mm with
peripheral coarse grain control
Rivets, solid, universal head, in aluminium alloy 2117, inch based series
Aluminium and aluminium alloys - Master alloys produced by melting - Specifications
Aluminium alloy AL-P7075-T7351 - Drawn bars 6 mm a or D 75 mm
Aluminium and aluminium alloys - Wrought forging stock - Technical conditions for inspection and
delivery
Method of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode
pitch - Determination of mesophase content
Aluminium and aluminium alloys - Forgings - Technical conditions for inspection and delivery
Specification for forging stock and forgings of aluminium-magnesium-silicon-manganese alloy
(solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy (solution treated and
artificially aged: tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr
Specification for tube of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and
aged at room temperature) (not exceeding 10 mm wall thickness) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
Specification for close toleranced sheet and strip of aluminium-copper-magnesium-silicon-manganese
alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
Specification for bars and extruded sections of magnesium-6% aluminium-zinc alloy (not exceeding
150 mm diameter or minor sectional dimension) (Al 6.0, Zn 1.0)
Specification for wire for solid, cold-forged rivets of 99.5% aluminium (not exceeding 10 mm diameter)
Specification for sheet and strip of aluminium-manganese alloy (temper designation H16 or H26)
Aluminium and aluminium alloys - Designation of unalloyed and alloyed aluminium ingots for
remelting, master alloys and castings - Writing rules for chemical composition
Aluminium and aluminium alloys - Scrap - Mixed turnings consisting of two or more alloys
Specification - Cold compressed hand forgings of aluminium-zinc-magnesium-copper-chromium alloy
(solution treated and artificially aged to an overaged condition) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.22)
Aluminum and aluminium alloys - Castings - Chemical composition of castings for use in contact with
foodstuff
Aluminium and aluminium alloys - Sheet, strip and plate - Tolerances on dimensions and form for hot-
rolled products
Aluminium alloy AL-P2014A-T6511 - Extruded bars and sections a or D 150 mm
Aluminium and aluminium alloys - Scrap - Scrap consisting of two or more wrought alloys
Aluminium alloy AL-P2024-T3511 - Extruded bars and sections 1,2 mm a or D 150 mm
Aluminium and aluminium alloys - Forgings - Mechanical properties and additional property
requirements
Aluminium and aluminium alloys. Terms and definitions. General terms
Aluminium and aluminium alloys - Scrap - Scrap consisting of non-ferrous materials from shredding
processes destined to aluminium separation processes
Aluminium and aluminium alloys - Scrap - Wire and cable scrap
Aluminium and aluminium alloys - Scrap - Unalloyed aluminium scrap
Aluminium and aluminium alloys - Scrap - Turnings consisting of one single alloy
Aluminium and aluminium alloys - Wrought forging stock - Tolerances on dimensions and form
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Numerical
designation system
Aluminium alloy AL-P7009-T74 - Die forgings 3 mm a 150 mm
Hexagonal bars, drawn, in aluminium and aluminium alloys - Tolerance class h 11 - Width across flats
7 mm a 50 mm - Dimensions
Aluminium and aluminium alloys - Designation of unalloyed and alloyed aluminium ingots for
remelting, master alloys and castings - Chemical symbol based designation system
Aluminium and aluminium alloys - Designation of unalloyed and alloyed aluminium ingots for
remelting, master alloys and castings - Numerical designation system
Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils -
Specifications
Magnesium and magnesium alloys - Returns - Requirements, classification and acceptance
Procedure for inspection, testing and acceptance of aluminium-base and magnesium-base ingots and
castings
Specification for bars and extruded sections of aluminium-copper-magnesium-silicon-manganese
alloy (solution treated and artificially aged) (not exceeding 200 mm diameter or minor sectional
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Chemical
symbol based designation system
Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-
silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn
Specification for sheet and strip of aluminium-manganese alloy (temper designation H12 or H22)
Specification for sheet and strip of aluminium-manganese alloy (temper designation-O)
Specification for forging stock, bars, extruded sections and forgings of 99% aluminium
Specification for sheet and strip of 99% aluminium (temper designation-O)
Specification for ingots and castings of aluminium-copper-nickel-manganese-titanium-zirconium-
cobalt-antimony alloy (solution treated and artificially aged) (Cu 5.0, Ni 1.5, Mn 0.25, Ti 0.2, Zr 0.2, Co
Aluminium and aluminium alloys - Scrap - Part 10: Scrap consisting of used aluminium beverage
cans; German version EN 13920-10:2003
Aluminium and aluminium alloys - Scrap - Part 16: Scrap consisting of skimmings, drosses, spills and
metallics; German version EN 13920-16:2003
Aluminium and aluminium alloys - Reroll stock for general applications - Part 1: Specifications for hot
rolled reroll stock; German version EN 12482-1:1998
Aluminium and aluminium alloys - Scrap - Part 4: Scrap consisting of one single wrought alloy;
German version EN 13920-4:2003
Aluminium and aluminium alloys - Scrap - Part 2: Unalloyed aluminium scrap; German version EN
13920-2:2003
Aluminium and aluminium alloys - Scrap - Part 13: Mixed turnings consisting of two or more alloys;
German version EN 13920-13:2003
Aluminium and aluminium alloys - Reroll stock for general applications - Part 2: Specifications for cold
rolled reroll stock; German version EN 12482-2:1998
Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms; Trilingual version EN
12258-1:1998
Zinc and zinc alloys - Method of sampling - Specifications; German version EN 12060:1997
Aluminium and aluminium alloys - Anodizing - Part 11: Measurement of specular reflectance and
specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60° or 85°; German version EN
Aluminium and aluminium alloys - Terms and definitions - Part 4: Residues of the aluminium industry;
Trilingual version EN 12258-4:2004
Aluminium and aluminium alloys - Anodizing - Part 19: Rating system for the evaluation of pitting
corrosion; Grid method; German version EN 12373-19:2001
Aluminium and aluminium alloys - Anodizing - Part 12: Measurement of reflectance characteristics of
aluminium surfaces using integrating-sphere instruments; German version EN 12373-12:2000
Aluminium and aluminium alloys - Scrap - Part 8: Scrap consisting of non-ferrous materials from
shredding processes destined to aluminium separation processes; German version EN 13920-8:2003
Aluminium and aluminium alloys - Scrap - Part 9: Scrap from aluminium separation processes of non-
ferrous shredded materials; German version EN 13920-9:2003
Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions; English version of
DIN EN 1301-3:2008-12
Aluminium and aluminium alloys - Products for structural railway applications; Technical conditions for
inspection and delivery - Part 1: Extruded products; German version EN 13981-1:2003
Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and
delivery; English version of DIN EN 1301-1:2008-12
Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications;
English version of DIN EN 1396:2007-04
Aluminium and aluminium alloys - Scrap - Part 15: Decoated aluminium scrap from post-consumer
aluminium packagings; German version EN 13920-15:2003
Magnesium Extruded Sections; Permissible Variations
Switchgear; Extruded Channel Sections of Aluminium for Busbars
Aluminium and aluminium alloys - Sheet, strip and plate for electrotechnical applications; English
version of DIN EN 14121:2009-09
Aluminium and aluminium alloys - Scrap - Part 1: General requirements, sampling and tests; German
version EN 13920-1:2003
Aluminium and aluminium alloys - Tread plate - Specifications; English version of DIN EN 1386:2008-
05
Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties; English version of DIN
EN 1301-2:2008-12
Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063
- Part 1: Technical conditions for inspection and delivery; English version of DIN EN 12020-1:2008-06
Aluminium for use in electrical engineering - Part 2: Tubes, rods bars and sections Technical delivery
conditions
Aluminium and aluminium alloys - Scrap - Part 7: Scrap consisting of castings; German version EN
13920-7:2003
Aluminium and aluminium alloys - Scrap - Part 14: Scrap from post-consumer aluminium packagings;
German version EN 13920-14:2003
Aluminium and aluminium alloys - Anodizing - Part 10: Measurement of mean specific abrasion
resistance of anodic oxidation coatings using an abrasive jet test apparatus; German version EN
Anodized products of wrought aluminium and wrought aluminium alloys - Technical conditions of
delivery
Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification;
German version EN 13957:2008
Aluminium and aluminium alloys - Products for structural railway applications, Technical conditions for
inspection and delivery - Part 2: Plates and sheets; German version EN 13981-2:2004
Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications -
Specification; German version EN 13958:2008
Aluminium and aluminium alloys - Products for structural railway applications, Technical conditions for
inspection and delivery - Part 3: Castings; German version EN 13981-3:2006
Magnesium Extruded Sections; Design
Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and
transportation of dangerous goods; German version EN 14286:2008
Aluminium and aluminium alloys - Scrap - Part 6: Scrap consisting of two or more wrought alloys;
German version EN 13920-6:2003
Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for
the production of pressure equipment; German version EN 12392:2000
Aluminium and aluminium alloys - Terms and definitions - Part 3: Scrap; Trilingual version EN 12258-
3:2003
Aluminium and aluminium alloys - Scrap - Part 3: Wire and cable scrap; German version EN 13920-
3:2003
Magnesium semi-finished products; Properties
Semiproducts for railway vehicles - Bars, profiles and sheet of wrought aluminium alloys - Part 1:
Selection
Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions
for inspection and delivery - Part 4: Forgings; English version of DIN EN 13981-4:2007-02
Aluminium and aluminium alloys - Scrap - Part 12: Turnings consisting of one single alloy; German
version EN 13920-12:2003
Wrought magnesium alloys
Magnesium Extruded Sections; Technical Conditions of Delivery
Aluminium and aluminium alloys - Scrap - Part 5: Scrap consisting of two or more wrought alloys of
the same series; German version EN 13920-5:2003
Aluminium and aluminium alloys - Specific requirements on the chemical composition of products
intended to be used for the manufacture of packaging and packaging components; German version
Semiproduct for railway vehicles - Aluminium profiles - Ledges
Aluminium and aluminium alloys - Scrap - Part 11: Scrap from aluminium-copper radiators; German
version EN 13920-11:2003
Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for
inspection and delivery; English version of DIN EN 15088:2006-03
Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063
- Part 2: Tolerances on dimensions and form; English version of DIN EN 12020-2:2008-06
Aluminium and aluminium alloys - Forgings - Part 1: Technical conditions for inspection and delivery;
German version EN 586-1:1997
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 4: Square bars,
tolerances on dimensions and form; English version of DIN EN 755-4:2008-06
Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys
and castings - Part 3: Writing rules for chemical composition; German version EN 1780-3:2002
Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications; English
version of DIN EN 541:2007-03
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 2:
Chemical symbol based on designation system; German version EN 573-2:1994
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties;
English version of DIN EN 755-2:2008-06
Aluminium and aluminium alloys - Drawing stock - Part 2: Specific requirements for electrical
applications; German version EN 1715-2:2008
Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys
and castings - Part 1: Numerical designation system; German version EN 1780-1:2002
Aluminium and aluminium alloys - Circle and circle stock for general applications - Specifications;
German version EN 941:1995
Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding
applications; German version EN 1715-4:2008
Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form
for hot-rolled products; German version EN 485-3:2003
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances
on dimensions and form; English version of DIN EN 754-5:2008-06
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes,
tolerances on dimensions and form; German version EN 755-8:2008, Corrigendum to DIN EN 755-
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for
inspection and delivery; English version of DIN EN 754-1:2008-06
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances
on dimensions and form; English version of DIN EN 754-7:2008-06
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3:
Chemical composition and form of products; English version of DIN EN 573-3:2009-08
Aluminium and aluminium alloys - Foil - Part 2: Mechanical properties; English version of DIN EN 546-
2:2007-03
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes,
tolerances on dimensions and form; English version of DIN EN 755-7:2009-07
Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications; German
version EN 576:2003
Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties; English version of DIN EN
683-2:2007-03
Aluminium and aluminium alloys - Foil - Part 1: Technical conditions for inspection and delivery;
English version of DIN EN 546-1:2007-03
Aluminium and aluminium alloys - Environmental aspects of aluminium products - General guidelines
for their inclusion in standards; German version EN 15530:2008
Aluminium and aluminium alloys - Cast forging stock - Part 1: Technical conditions for inspection and
delivery; German version EN 604-1:1997
Aluminium and aluminium alloys - Cast forging stock - Part 2: Tolerances on dimensions and form;
German version EN 604-2:1997
Aluminium and aluminium alloys - Wrought forging stock - Part 3: Tolerances on dimensions and
form; German version EN 603-3:2000
Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties;
German version EN 1706:2010
Aluminium and aluminium alloys - HF seam welded tubes - Part 4: Tolerances on dimensions and
form for square, rectangular and shaped tubes; German version EN 1592-4:1997
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1:
Numerical designation system; German version EN 573-1:2004
Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils -
Specifications; German version EN 851:1995
Magnesium and magnesium alloys - Magnesium and magnesium alloy anodes, ingots and castings -
Designation system; German version EN 1754:1997
Aluminium and aluminium alloys - Forgings - Part 2: Mechanical properties and additional property
requirements; German version EN 586-2:1994
Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products
used for the fabrication of articles for use in contact with foodstuff; German version EN 602:2004
Aluminium and aluminium alloys - Wrought forging stock - Part 2: Mechanical properties; German
version EN 603-2:1996
Aluminium and aluminium alloys - Finstock - Part 3: Tolerances on dimensions and form; English
version of DIN EN 683-3:2007-03
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5: Rectangular bars,
tolerances on dimensions and form; English version of DIN EN 755-5:2008-06
Aluminium and aluminium alloys - HF seam welded tubes - Part 2: Mechanical properties; German
version EN 1592-2:1997
Aluminium and aluminium alloys - Foil - Part 4: Special property requirements; English version of DIN
EN 546-4:2007-03
Aluminium and aluminium alloys - HF seam welded tubes - Part 3: Tolerances on dimensions and
form for circular tubes; German version EN 1592-3:1997
Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties; comparision
of temper designations
Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications; German version EN
1676:2010
Aluminium and aluminium alloys - Wrought forging stock - Part 1: Technical conditions for inspection
and delivery; German version EN 603-1:1996
Aluminium and aluminium alloys - Test methods - Earing test for sheet and strip; German version EN
1669:1996
Aluminium and aluminium alloys - Liquid metal - Specifications; German version EN 577:1995
Magnesium and magnesium alloys - Magnesium alloy ingots and castings; German version EN
1753:1997
Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys
and castings - Part 2: Chemical symbol based designation system; German version EN 1780-2:2002
Aluminium and aluminium alloys - Forgings - Part 3: Tolerances on dimensions and form; German
version EN 586-3:2001
Aluminium and aluminium alloys - HF seam welded tubes - Part 1: Technical conditions for inspection
and delivery; German version EN 1592-1:1997
Aluminium and aluminium alloys; sheet, strip and plate; part 4: tolerances on shape and dimensions
for cold-rolled products; German version EN 485-4:1993
Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with
foodstuff; German version EN 601:2004
Testing of carbonaceous materials - Green and calcined coke - Determination of trace elements by
flame atomic absorption spectroscopy (ISO 8658:1997)
Aluminium and aluminium alloys - Finstock - Part 1: Technical conditions for inspection and delivery;
English version of DIN EN 683-1:2007-03
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes,
tolerances on dimensions and form; English version of DIN EN 755-8:2008-06
Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products -
Specification; English version of DIN EN 570:2007-04
Aluminium and aluminium alloys - Drawing stock - Part 3: Specific requirements for mechanical uses
(excluding welding); German version EN 1715-3:2008
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3: Round bars, tolerances
on dimensions and form; English version of DIN EN 755-3:2008-06
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances
on dimensions and form; English version of DIN EN 754-6:2008-06
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on
dimensions and form; English version of DIN EN 754-8:2008-06
Aluminium and aluminium alloys - Drawing stock - Part 1: General requirements and technical
conditions for inspection and delivery; German version EN 1715-1:2008
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5:
Codification of standardized wrought products; English version of DIN EN 573-5:2007-11
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on
dimensions and form; English version of DIN EN 754-4:2008-06
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on
dimensions and form; English version of DIN EN 754-3:2008-06
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties;
English version of DIN EN 754-2:2008-06
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on
dimensions and form; English version of DIN EN 755-9:2008-06
Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties; English
version of DIN EN 485-2:2009-01
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties;
German version EN 755-2:2008, Corrigendum to DIN EN 755-2:2008-06
Aluminium and aluminium alloys - Master alloys produced by melting - Specifications; German version
EN 575:1995
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on
dimensions and form; German version EN 755-9:2008, Corrigendum to DIN EN 755-9:2008-06
Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions; English version of DIN EN
546-3:2007-03
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 6: Hexagonal bars,
tolerances on dimensions and form; English version of DIN EN 755-6:2008-06
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions
for inspection and delivery; English version of DIN EN 755-1:2008-06
Aluminium and aluminium alloys; wrought products; temper designations; German version EN
515:1993
Use of Permanent Mold Cast Aluminum Alloys UNS A13560 and A03570 Section VIII, Division 1
Aluminum Alloy 3003-H24 for Code Construction Section VIII, Division 1
Use of Sand Cast Aluminum Alloy A356.0, T6 Temper, for the Manufacture of Hot Water Heating
Boilers Under Part HC Section IV
Aluminum Alloy EN AW-6082-T6 Fittings for Nonwelded Construction Section VIII, Division 1
Use of Sand Case Aluminum Alloy EN AC-AlSi10Mg(a), F Temper, in the Manufacture of Hot Water
Heating Boilers Under Part HC Section IV; SUPP 8&9
Aluminum Alloy (Aluminum-6.3Magnesium) for Code Construction Section VIII, Division 1 SUPP 8&9
Use of Semi-Permanent Mold Case Aluminum Alloy A356.0 for the Manufacture of Heating Boilers
Under Part HC Section IV (ANNULLED) (SUPP 12)
Use of 6061-T6 and 6061-T651 Aluminum for Class 1 Nuclear Components Section III, Division 1;
ANNULLED; SUPP 7 Supplement 7
Use of SB-209 5052-H32 Temper Aluminum Alloy in Part HF of Section IV, for Construction of
Heating Boilers Sections IV and II-B; (SUPP 11)
Specification for Aluminum and Aluminum-Alloy Sheet and Plate ASTM B209-96
Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes ASTM B210-95
SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY DRAWN SEAMLESS TUBES
Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire ASTM B211-99
Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, and Profiles ASTM B221-96
Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat
Exchangers ASTM B234-95
Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube ASTM
B241/B241M-99
Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles ASTM B308/B308M-96
Standard Specification for Shelter, Tactical, Nonexpandable
Specification for Zinc-Copper-Aluminum Alloy Die Castings
Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes [Metric]
Specification for Zinc-Aluminum Alloys in Ingot Form for Foundry and Die Castings
Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-
Purpose Applications
Specification for Zinc-5 % Aluminum-Mischmetal Alloy (UNS Z38510) in Ingot Form for Hot-Dip
Coatings
Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and
Tubes [Metric]
Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire [Metric]
Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type
Transportable Shelters
Specification for Zinc-Aluminum (Za) Alloy Foundry and Die Castings
Standard Digital Reference Images for Inspection of Aluminum Castings
Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable
Aluminum Alloy Products Using Breaking Load Method
Standard Specification for Magnesium-Alloy Die Castings
Standard Specification for Aluminum for Use in Iron and Steel Manufacture
Standard Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating
Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum
Products
Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and
Profiles for Electrical Purposes (Bus Conductor)
Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled
Ring Forgings
Standard Specification for GALFAN (Zinc-5 % Aluminum-Mischmetal) Alloy in Ingot Form for Hot-Dip
Coatings
Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting
Processes
Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate
Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy
Products
Standard Specification for Aluminum and Aluminum-Alloy Round Welded Tubes
Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles
Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers
and Heat Exchangers
Standard Test Method for Shear Testing of Aluminum Alloys
Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate [Metric]
Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis
Standard Specification for Aluminum-Alloy Sand Castings
Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy
Products [Metric]
Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Atomic Emission
Spectrometry
Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes
Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
Standard Specification for Magnesium Alloy Anodes for Cathodic Protection
Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum
Production
Standard Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate
Standard Specification for Magnesium-Alloy Investment Castings
Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys
Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold
Castings, and Die Castings
Standard Specification for Shelter, Tactical, Expandable, One-Side
Standard Specification for Aluminum Foil for Capacitors
Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire
Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and
Similar Environments
Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube
Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding
Stock
Standard Specification for Aluminum Alloy Chain Link Fence Fabric
Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers
and Heat Exchangers [Metric]
Standard Specification for Magnesium-Alloy Forgings
Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission
Spectrometry
Standard Practice for Heat Treatment of Wrought Aluminum Alloys
Standard Terminology Relating to Aluminum- and Magnesium- Alloy Products
Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and
Cathode Carbon Used by the Aluminum Industry
Standard Specification for Magnesium-Alloy Sheet and Plate
Standard Specification for Aluminum-Alloy Rolled Tread Plate
Standard Practice for Heat Treatment of Magnesium Alloys
Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by X-Ray
Fluorescence
Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded
Tube
Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food
Contact, and Other Applications
Standard Specification for Shelter, Tactical, Expandable, Two-Side
Standard Specification for Magnesium-Alloy Permanent Mold Castings
Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature
Shaping Process for Production of T1, T2, T5 and T10-Type Tempers
Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and
Tubes
Standard Specification for Pure Aluminum (Unalloyed) Source Material for Vacuum Coating
Applications
Standard Practice for Fracture Toughness Testing of Aluminum Alloys
Standard Practice for Standardizing Equipment for Electromagnetic Examination of Seamless
Aluminum-Alloy Tube
Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded
Tube
Standard Guide for Preparation of Aluminum Alloys for Electroplating
Standard Specification for Pure Aluminum (Unalloyed) Source Material for Electronic Thin Film
Applications
Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire
Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic
Measurement
ERRATUM
Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled
Ring Forgings [Metric]
2024年3月11日发(作者：修朔)
标准号
GB 8178-1987
GB 8544-1987
GB 8646-1988
GB 6608-1986
GB/T 10571-1989
GB 8734-1988
GB 8735-1988
GB/T 12769-2003
GB/T 11109-1989
GB/T 1196-1993
GB/T 1196-2002
GB/T 1173-1995
GB/T 13586-1992
GB/T 1197-1975
GB/T 16501-1996
GB/T 14846-1993
GB/T 16474-1996
GB/T 17432-1998
GB/T 16865-1997
GB/T 17731-1999
GB/T 17171-1997
GB/T 16475-1996
GB/T 17731-2004
GB/T 19347-2003
GB/T 15115-1994
GB/T 3614-1999
GB/T 3615-1999
GB/T 3616-1999
GB/T 19078-2003
GB/T 3499-1995
GB/T 3618-1989
GB/T 3499-2003
GB/T 3190-1996
GB/T 4296-2004
GB/T 4436-1995
GB/T 4437.1-2000
GB/T 4437.2-2003
GB/T 3129-1982
GB/T 3191-1998
GB/T 3194-1998
GB/T 3195-1997
GB/T 3196-2001
GB/T 3197-2001
GB/T 3198-2003
GB/T 3199-1996
GB 4864-1985
GB/T 5154-1985
GB/T 5154-2003
GB/T 5155-1985
GB/T 4438-1984
GB/T 5155-2003
GB/T 5156-1985
GB/T 5156-2003
GB/T 5150-1985
GB/T 5150-2004
GB/T 5153-1985
GB/T 3880-1997
GB/T 4864-1995
GB/T 4292-1999
GB/T 4293-1984
GB/T 5153-2003
GB/T 5237.1-2000
GB/T 5237.2-2000
GB/T 6891-1986
GB/T 5237.3-2000
GB/T 6892-2000
GB/T 5237.4-2000
GB/T 5237.5-2000
GB/T 6893-2000
GB/T 5237-1993
GB/T 6519-2000
GB/T 8544-1997
GB/T 8545-1987
GB/T 8733-2000
GB/T 8890-1998
GB/T 8179-1987
GB/T 8180-1987
GB/T 8644-2000
GB/T 8645-1988
GJB 1738-1993
GJB 1742-1993
GJB 1744-1993
GJB 1745-1993
GJB 1531-1992
GBn 221-1984
GBn 222-1984
GJB 1536-1992
GJB 1537-1992
GBn 168-1982
GJB 2055-1994
GJB 1833-1993
GJB 2920-1997
GJB 756-1989
GJB 395-1987
GJB 495-1988
GJB 581-1988
GJB 1540-1992
GJB 2894-1997
GJB 494-1988
GJB 582-1988
GB 5237.1-2004
GB 5237.2-2004
GB 5237.3-2004
GB 5237.4-2004
GB 5237.5-2004
GB 5237.6-2004
GB 5149.1-2004
GB 5149-1985
GB/T 1196-2008
GB/T 3954-2008
GB/T 17171-2008
GB/T 19347.2-2005
GB/T 20926-2007
GB/T 3199-2007
GB/T 3615-2007
GB/T 8733-2007
GJB/Z 125-1999
GB 5237-1985
GB/T 6892-2006
GJB 5497-2005(K)
GB/T 4292-2007
GB/T 13586-2006
GB/T 22662.3-2008
GB/T 22662.4-2008
GB/T 22662.5-2008
GJB 5077-2001(K)
GB/T 3618-2006
GB/T 22662.6-2008
GB/T 22662.7-2008
GB/T 22662.8-2008
GB/T 4438-2006
GB/T 22662.9-2008
GB/T 22667-2008
GB/T 22662.2-2008
GB/T 6891-2006
GB/T 22668-2008
GB/T 22661.10-2008
GB/T 22661.1-2008
GB/T 20250-2006
GB 3499-1983
GB/T 22661.2-2008
GB 4367-1984
GB/T 22661.3-2008
GB/T 22661.4-2008
GB 4368-1984
GB/T 22661.5-2008
GB/T 22661.6-2008
GB 3190-1982
GB/T 22661.7-2008
GB 3191-1982
GB/T 22661.8-2008
GB/T 22661.9-2008
GB 3192-1982
GB 3193-1982
GB 3194-1982
GB 3195-1982
GB 3198-1996
GB/T 22662.1-2008
GB 3199-1982
GB 4436-1984
GB/T 3195-2008
GB 3614-1983
GB 3615-1983
GB 3616-1991
GB 4437-1984
GB 3617-1983
GB 3619-1983
GB 3620-1983
GB 10568-1989
GB 10569-1989
GB 3621-1983
GB 3622-1983
GB 3623-1983
GB 3624-1983
GB 3625-1983
GB 10570-1989
GB 10572-1989
GB 4292-1984
GB 4294-1984
GB 1173-1986
GB 3880-1983
GB 3881-1983
GB 1196-1988
GB/T 3880.1-2006
GB/T 3880.2-2006
GB/T 3880.3-2006
GB/T 4864-2008
GB 12768-1991
GB/T 17731-2009
GB/T 24481-2009
GB/T 24483-2009
GB/T 24486-2009
GB/T 24487-2009
GJB 5909-2006(K)
GB 5237.1-2008
GB/T 14846-2008
GB 5237.2-2008
GB 5237.3-2008
GB 5237.4-2008
GB/T 22641-2008
GB/T 22642-2008
GB/T 22643-2008
GB/T 22644-2008
GB/T 22645-2008
GB/T 22646-2008
GB/T 22647-2008
GB/T 22648-2008
GB 5237.5-2008
GB/T 22649-2008
CB 1191-1988
HB 5471-1991
HB 5473-1991
HB/Z 215-1992
GB/T 23612-2009
JB 4394-1987
JB 2412-1978
SJ 20500-1995
SY/T 0095-2000
JB/T 6986-1993
QB 903-1983
YS/T 243-2001(2009)
YS/T 309-1998
YS/T 242-2000
YS/T 322-1994(2009)
YB/T 109.1-1997
YS/T 282-2000(2009)
SN/T 0991-2001
YS/T 274-1998(2009)
YS/T 407-1997
YS/T 67-1993
YS/T 275-2000
YS/T 69-1993
YS/T 417.1-1999(2009)
YS/T 417.2-1999(2009)
YS/T 435-2000
YS/T 417.3-1999(2009)
YS/T 436-2000(2009)
YS/T 417.4-1999(2009)
YS/T 417.5-2000(2009)
YS/T 419-2000(2009)
YS/T 420-2000(2009)
YS/T 439-2001
YS/T 446-2002
YS/T 421-2000
YS/T 212-1994
YS/T 213-1994
YS/T 447.1-2002
YS/T 214-1994
YS/T 454-2003(2009)
YS/T 458-2003
YS/T 215-1994
YS/T 75-1994
YS/T 90-1995
YS/T 90-2002
YS/T 91-1995
YS/T 91-2002
YS/T 92-1995(2009)
YS/T 95.2-2001
YS/T 97-1997
YS/T 459-2003
YS/T 100-1997
YS/T 430-2000
YS/T 431-2000
YS/T 432-2000(2009)
YS/T 517-2006
YS/T 490-2005
YS/T 491-2005
YS/T 492-2005
YS/T 493-2005
YS/T 494-2005
YS/T 495-2005
YS/T 496-2005
YS/T 67-2005
YS/T 489-2005
YS/T 434-2000
YS/T 560-2007
YS/T 560-2006
YS/T 570-2006
QC/T 756-2006
SN/T 1408-2004
YS/T 95.1-2001
SN/T 1038-2002
YS/T 589-2006
YS/T 69-2005
YS/T 457-2003(2009)
YS/T 479-2005
YS/T 588-2006
YS/T 590-2006
YS/T 678-2008
YS/T 619-2007
YS/T 621-2007
YS/T 622-2007
YS/T 624-2007
YS/T 626-2007
YS/T 627-2007
YS/T 421-2007
JG/T 175-2005
YS/T 275-2008
YS/T 711-2009
YS/T 712-2009
YS/T 713-2009
YS/T 641-2007
YS/T 90-2008
YS/T 695-2009
YS/T 696-2009
YS/T 697-2009
YS/T 698-2009
YS/T 714-2009
YS/T 665-2009
YS/T 686-2009
YS/T 687-2009
YS/T 688-2009
YS/T 95.1-2009
YS/T 95.2-2009
YS/T 689-2009
YS/T 690-2009
YS/T 91-2009
YS/T 242-2009
YS/T 431-2009
YS/T 434-2009
CJ/T 321-2010
SN/T 2264-2009
SN/T 1038-2002(2010)
YS/T 725-2010
YS/T 726-2010
YS/T 727-2010
ANSI H35.2-2009
YS/T 435-2009
ANSI H35.3-1997
ANSI H35.2M-2009
ANSI H35.5-1993
ANSI C80.5-2005
ANSI H35.1/H 35.1M-2009
NF A50-738-1987
ANSI H35.4-2006
NF A08-650-1992
NF A36-345-1991
NF P34-631-1983
NF A50-931-1994
NF A57-140-1995
NF A65-727-1988
NF A57-110-1995
NF A02-040-1997
NF A50-110-10-2003
NF A50-110-14-2003
NF A50-921-1996
NF A57-100-2004
NF A50-110-8-2003
NF A50-811-1997
NF A50-813-1997
NF A50-423-1994
NF A50-110-15-2003
NF A50-110-12-2003
NF A50-810-1997
NF A50-110-11-2003
NF A02-121-1994
NF A50-110-9-2003
NF A50-430-1995
NF A57-500-1997
NF A57-502-1998
NF A50-434-1-1998
NF A57-501-1998
NF A50-120-2000
NF A50-422-2003
NF A50-001-2-2005
NF A50-110-7-2003
NF A50-470-2-2004
NF A50-110-5-2003
NF A50-431-1995
NF A50-426-2004
NF A02-130-2-2003
NF A02-130-1-2003
NF A50-110-2-2003
NF A50-932-3-2002
NF A57-120-2004
NF A50-930-1997
NF A50-911-1997
NF A50-920-1996
NF A02-016-2006
NF A50-470-3-2006
NF A50-101-1990
NF A50-460-3-2007
NF A50-121-2006
NF A50-510-2007
NF A50-460-1-2007
NF A50-440-1-2007
NF A50-440-4-2007
NF A50-800-2-2007
NF A50-440-3-2007
NF A02-120-5-2007
NF A50-650-2-2008
NF A50-115-2008
NF A50-610-6-2008
NF A50-610-1-2008
NF A50-640-1-2008
NF A50-610-7-2008
NF A50-630-4-2008
NF A50-630-5-2008
NF A50-610-4-2008
NF A50-610-5-2008
NF A50-640-2-2008
NF A50-630-2-2008
NF A50-670-1-2008
NF A50-645-2008
NF A50-420-2-2008
NF A50-620-2008
NF A50-425-2008
NF A50-610-3-2008
NF P34-411-1983
NF P34-601-1981
NF A50-420-1/IN1-2009
NF A02-150-1993
NF A50-435-1996
NF A50-670-2-2008
NF A50-110-1-2003
NF P34-504-1983
NF A50-712-1986
NF A50-420-1-2009
NF A50-110-4-2003
NF A50-110-13-2003
NF A02-130-3-2003
NF A50-437-2007
NF A50-670-3-2008
NF A65-737-1988
NF A50-812-1997
NF A03-301-2002
NF A50-001-4-2005
NF A50-432-2007
NF A50-440-2-2007
NF A05-110-2001
NF P34-602-1981
NF A65-777-1988
NF A02-007-1973
NF A50-630-3-2008
NF A50-434-2-1998
NF A50-001-3-2003
NF A50-630-6-2008
NF A50-630-9-2008
NF A50-630-1-2008
NF A50-110-16-2003
NF A50-800-1-2007
NF A50-001-1-1998
NF A50-110-3-2003
NF A50-100-2004
NF A50-610-8-2008
NF A50-460-2-2007
NF A50-630-7-2008
NF A50-433-2007
NF A50-910-1997
NF A50-610-2-2008
NF A50-110-6-2003
NF A50-470-1-2003
NF A50-922-2000
JIS H5203-2006
JIS H5303-2006
JIS H2221-2006
JIS H2222-2006
JIS H2110-1968
JIS H4160-1994
JIS H1306-1999
JIS H0001-1998
JIS H4040 ERRATUM 1-2006
JIS H4000-2006
JIS H4001-2006
JIS H4040-2006
JIS H4080-2006
JIS H4201-2005
JIS H1367-2005
JIS H4100-2006
JIS H4203-2005
JIS H4204-2005
JIS H1368-2005
JIS H2103 AMD 1-2006
JIS H4090 AMD 1-2006
JIS H4202-2005
JIS H4160 AMD 1-2006
JIS H2102-1968
JIS H2103-1965
JIS H2111-1968
JIS H4170 AMD 1-2006
JIS G2314-1986
JIS H4140-1988
JIS H2119-1984
JIS H4170-1991
JIS S2010-1997
JIS H4000 ERRATUM 1-2006
JIS H4100 ERRATUM 1-2006
JIS H5302-2006
JIS H5801-2000
JIS H2118-2006
JIS H4635 ERRATUM 1-2006
JIS H0542-2008
JIS H1342-2008
JIS H2118 ERRATUM 1-2006
JIS H2102 AMD 1-2009
JIS H1343-2008
JIS H4040 ERRATUM 2-2008
JIS H2110 AMD 1-2009
JIS H4080 ERRATUM 1-2008
JIS H4100 ERRATUM 2-2008
JIS S2010 AMD 1-2009
JIS H4100 ERRATUM 1-2008
JIS H4040 ERRATUM 1-2008
JIS H2111 AMD 1-2009
ISO 2379-1972
ISO 6365-1-1988
JIS H2211-2010
ISO 8007-1-1999
ISO 10049-1992
ISO 9915-1992
ISO 9591-2004
ISO 6361-2-1990
ISO 23079-2005
ISO 16220-2005
ISO 5931-2000
ISO 12979-1999
ISO 12977-1999
ISO 9088-1997
ISO 8287-2000
ISO 8658-1997
ISO 12980-2000
ISO 6362-5-2001
ISO 6361-1-1986
ISO 7274-1981
ISO 8007-2-1999
ISO 6362-3-2001
ISO 6363-4-1991
ISO 6363-1-1988
ISO 7773-1983
ISO 6361-4-1988
ISO 209-2007
ISO 17615-2007
ISO 26202-2007
ISO 3522-2007
ISO 2377-1972
ISO 2378-1972
ISO 10143-1995
ISO 6363-2-1993
ISO 6362-2-1990
ISO 5193-1981
ISO 6362-1-1986
ISO 6362-4-1988
ISO 7271-1982
ISO 115-2003
ISO 806-2004
ISO 6361-3-1985
ISO 16220 AMD 1-2007
ISO 17615 Technical
Corrigendum 1-2008
ISO 2107-2007
ISO 6363-5-1992
ISO 10236-1995
ISO 10142-1996
ISO 8007-3-2003
ISO 3116-2007
IEC 60114 Corrigendum 1-
1959
EN 603-1-1996
EN 12482-1-1998
EN 13920-10-2003
EN 13920-16-2003
EN 13981-1-2003
EN 1669-1996
EN 1780-2-2002
EN 577-1995
EN 13920-4-2003
EN 13920-2-2003
EN 13920-13-2003
EN 1753-1997
EN 12482-2-1998
EN 12060-1997
EN 485-4-1993
EN 12373-11-2000
EN 12258-1-1998
EN 586-3-2001
EN 12373-12-2000
EN 12258-4-2004
EN 12373-19-2001
EN 13920-8-2003
EN 1592-1-1997
EN 13920-9-2003
EN 1396-2007
EN 570-2007
EN 601-2004
EN 683-1-2006
EN 1301-3-2008
EN 755-3-2008
EN 754-6-2008
EN 573-5-2007
EN 754-4-2008
EN 755-8-2008
EN 754-3-2008
EN 754-2-2008
EN 1301-1-2008
EN 754-8-2008
EN 485-2-2008
EN 1715-1-2008
EN 755-9-2008
EN 13920-15-2003
EN 14121-2009
EN 575-1995
EN 13920-7-2003
EN 1715-3-2008
EN 13920-1-2003
EN 1386-2007
EN 755-6-2008
EN 755-1-2008
EN 546-3-2006
EN 1301-2-2008
EN 12020-1-2008
EN 755-4-2008
EN 586-1-1997
EN 12373-10-1998
EN 515-1993
EN 13920-14-2003
EN 1715-2-2008
EN 13957-2008
EN 1780-3-2002
EN 541-2006
EN 13981-2-2004
EN 755-2-2008
EN 754-1-2008
EN 14286-2008
EN 1780-1-2002
EN 13981-3-2006
EN 1715-4-2008
EN 485-3-2003
EN 754-5-2008
EN 13958-2008
EN 754-7-2008
EN 546-2-2006
EN 573-3-2009
EN 573-2-1994
EN 941-1995
EN 755-7-2008
EN 13920-6-2003
EN 576-2003
EN 604-1-1997
EN 12258-3-2003
EN 683-2-2006
EN 12392-2000
EN 15530-2008
EN 546-1-2006
EN 1706-2010
EN 604-2-1997
EN 13920-12-2003
EN 603-3-2000
EN 13920-3-2003
EN 573-1-2004
EN 755-5-2008
EN 1754-1997
EN 1592-4-1997
EN 13981-4-2006
EN 586-2-1994
EN 603-2-1996
EN 13920-5-2003
EN 13920-11-2003
EN 602-2004
EN 851-1995
EN 1592-2-1997
EN 1592-3-1997
EN 683-3-2006
EN 14287-2004
EN 546-4-2006
EN 12020-2-2008
EN 1676-2010
EN 15088-2005
BS EN 61788-7-2006
BS EN 546-4-2006
BS EN 546-3-2006
BS 3313-1-1968
BS ISO 17615-2007
BS EN 546-1-2006
BS EN 586-3-2002
BS EN 2290-1-1998
BS 6043-2.12-1994
BS EN 2630-1994
BS EN 755-1-2008
BS M 93-2005
BS EN 755-3-2008
BS EN 1715-2-2008
BS EN 1396-2007
BS EN 570-2007
BS EN 683-3-2006
BS EN 755-4-2008
BS EN 12020-1-2008
BS EN 754-1-2008
BS EN 755-5-2008
BS EN 755-7-2008
BS EN 754-2-2008
BS EN 13958-2008
BS EN 755-8-2008
BS EN 485-2-2008
BS EN 1715-1-2008
BS EN 1669-1997
BS EN 577-1996
BS EN 1715-3-2008
BS EN 2385-1992
BS EN 12258-2-2004
BS EN 2126-1992
BS EN 485-1-2008+A1-2009
BS EN 1676-2010
BS EN 1706-2010
BS EN 13957-2008
BS EN 14121-2009
BS 4300/10-1969
BS EN 12421-1998
BS EN 941-1996
BS L 117-1975
BS 4L 100-1993
BS EN 13920-5-2003
KT 1-1999
BS EN 13981-4-2006
BS ISO 806-2004
BS EN 541-2006
BS EN ISO 2128-2010
BS ISO 3116-2007
BS EN 1301-1-2008
BS EN 2284-1991
BS EN 2093-1992
BS 7L 37-1989
BS EN 2004-1-1993
BS EN 2334-1997
BS EN 2082-1-1991
BS EN 13920-11-2003
BS L 115-1971
BS EN 1386-2007
BS EN 12258-4-2004
BS EN ISO 3211-2010
BS 2897-1970
BS EN 2127-1992
BS L 113-1971
BS EN 2089-2005
BS EN 13981-2-2004
BS EN 13981-3-2006
BS EN 12020-2-2008
BS EN 755-9-2008
BS EN 15530-2008
BS EN 1301-3-2008
BS EN 604-2-1997
BS EN 13920-10-2003
BS L 110-1971
BS EN 683-2-2006
BS EN 13920-7-2003
BS ISO 16220-2005
BS EN 13981-1-2003
BS L 165-1978
BS EN 14286-2008
BS 4L 54-1986
BS EN 2326-1992
BS EN 2004-5-1993
BS EN 12438-1998
BS EN 546-2-2006
BS ISO 209-2007
BS EN 754-3-2008
BS EN 755-2-2008
BS EN 754-8-2008
BS EN 14287-2004
BS EN 12482-1-1998
BS EN 1301-2-2008
BS L 109-1971
BS EN 13920-9-2003
BS EN 2381-1992
BS EN 13920-14-2003
BS EN 12258-3-2003
BS EN 15088-2005
BS EN ISO 8993-2010
BS EN 755-6-2008
BS L 167-1978
BS 2898-1970
BS 6043-3.2-1997
BS EN 604-1-1997
BS EN 13920-16-2003
BS EN 13920-1-2003
BS EN 12482-2-1998
BS EN 754-4-2008
BS EN 754-7-2008
BS EN 13195-2009
BS L 114-1971
BS EN ISO 2085-2010
BS 6043-2.16-1998
BS EN 2636-1994
BS M 58-1986
BS EN 485-4-1994
BS EN 603-2-1997
BS EN 13920-15-2003
BS EN 13920-4-2003
BS EN 602-2004
BS EN 14361-2004
BS EN 12392-2000
BS EN 683-1-2006
BS EN 515-1993
BS EN 1715-4-2008
BS EN 2100-1992
BS EN 576-2003
BS 6L 16-1985
BS EN 754-6-2008
BS EN 573-5-2007
BS EN 2101-1991
BS EN 2633-1994
BS EN 2144-1994
BS EN 575-1996
BS EN 2128-1992
BS EN 603-1-1997
BS 6043-1.12-1994
BS EN 586-1-1998
BS L 112-1971
BS L 118-1975
BS L 105-1971
BS L 159-1978
BS L 512-1973
BS 5L 36-1985
BS 4L 59-1985
BS EN 1780-3-2002
BS EN 13920-13-2003
BS L 162-1976
BS EN 601-2004
BS EN 485-3-2003
BS EN 2384-1992
BS EN 13920-6-2003
BS EN 2318-1992
BS EN 586-2-1994
BS EN 12258-1-1998
BS EN 13920-8-2003
BS EN 13920-3-2003
BS EN 13920-2-2003
BS EN 13920-12-2003
BS EN 603-3-2000
BS EN 573-1-2004
BS EN 2094-1992
BS EN 2046-2001
BS EN 1780-2-2002
BS EN 1780-1-2002
BS EN 851-1996
BS ISO 23079-2005
BS 4L 101-1990
BS L 168-1978
BS EN 573-2-1995
BS L 166-1978
BS 4L 60-1985
BS 4L 61-1985
BS 5L 34-1985
BS 6L 17-1985
BS L 119-1975
DIN EN 13920-10-2003
DIN EN 13920-16-2003
DIN EN 12482-1-1998
DIN EN 13920-4-2003
DIN EN 13920-2-2003
DIN EN 13920-13-2003
DIN EN 12482-2-1998
DIN EN 12258-1-1998
DIN EN 12060-1998
DIN EN 12373-11-2000
DIN EN 12258-4-2005
DIN EN 12373-19-2001
DIN EN 12373-12-2000
DIN EN 13920-8-2003
DIN EN 13920-9-2003
DIN EN 1301-3-2008
DIN EN 13981-1-2003
DIN EN 1301-1-2008
DIN EN 1396-2007
DIN EN 13920-15-2003
DIN 9711-3-1963
DIN 46424-1973
DIN EN 14121-2009
DIN EN 13920-1-2003
DIN EN 1386-2008
DIN EN 1301-2-2008
DIN EN 12020-1-2008
DIN 40501-2-2005
DIN EN 13920-7-2003
DIN EN 13920-14-2003
DIN EN 12373-10-1999
DIN 17611-2007
DIN EN 13957-2009
DIN EN 13981-2-2004
DIN EN 13958-2009
DIN EN 13981-3-2006
DIN 9711-2-1963
DIN EN 14286-2008
DIN EN 13920-6-2003
DIN EN 12392-2000
DIN EN 12258-3-2003
DIN EN 13920-3-2003
DIN 9715-1982
DIN 5517-1-2003
DIN EN 13981-4-2007
DIN EN 13920-12-2003
DIN 1729-1-1982
DIN 9711-1-1963
DIN EN 13920-5-2003
DIN EN 14287-2004
DIN 5518-2005
DIN EN 13920-11-2003
DIN EN 15088-2006
DIN EN 12020-2-2008
DIN EN 586-1-1997
DIN EN 755-4-2008
DIN EN 1780-3-2003
DIN EN 541-2007
DIN EN 573-2-1994
DIN EN 755-2-2008
DIN EN 1715-2-2008
DIN EN 1780-1-2003
DIN EN 941-1995
DIN EN 1715-4-2008
DIN EN 485-3-2003
DIN EN 754-5-2008
DIN EN 755-8 Berichtigung 1-
2009
DIN EN 754-1-2008
DIN EN 754-7-2008
DIN EN 573-3-2009
DIN EN 546-2-2007
DIN EN 755-7-2009
DIN EN 576-2004
DIN EN 683-2-2007
DIN EN 546-1-2007
DIN EN 15530-2008
DIN EN 604-1-1997
DIN EN 604-2-1997
DIN EN 603-3-2000
DIN EN 1706-2010
DIN EN 1592-4-1997
DIN EN 573-1-2005
DIN EN 851-1995
DIN EN 1754-1997
DIN EN 586-2-1994
DIN EN 602-2004
DIN EN 603-2-1996
DIN EN 683-3-2007
DIN EN 755-5-2008
DIN EN 1592-2-1997
DIN EN 546-4-2007
DIN EN 1592-3-1997
DIN EN 485-2 Bb.1-1996
DIN EN 1676-2010
DIN EN 603-1-1996
DIN EN 1669-1997
DIN EN 577-1995
DIN EN 1753-1997
DIN EN 1780-2-2003
DIN EN 586-3-2002
DIN EN 1592-1-1997
DIN EN 485-4-1994
DIN EN 601-2004
DIN ISO 8658-2003
DIN EN 683-1-2007
DIN EN 755-8-2008
DIN EN 570-2007
DIN EN 1715-3-2008
DIN EN 755-3-2008
DIN EN 754-6-2008
DIN EN 754-8-2008
DIN EN 1715-1-2008
DIN EN 573-5-2007
DIN EN 754-4-2008
DIN EN 754-3-2008
DIN EN 754-2-2008
DIN EN 755-9-2008
DIN EN 485-2-2009
DIN EN 755-2 Berichtigung 1-
2009
DIN EN 575-1995
DIN EN 755-9 Berichtigung 1-
2009
DIN EN 546-3-2007
DIN EN 755-6-2008
DIN EN 755-1-2008
DIN EN 515-1993
ASME 2239-1-2001
ASME 2019-1-2001
ASME 2344-2001
ASME 2354-2001
ASME 2382-1-2001
ASME 2403-2001
ASME 2153-1-2001
ASME N-519-2001
ASME 2432-2001
ASME SEC II B SB-209-2001
ASME SEC II B SB-210-2001
ASME SB210-2004
ASME SEC II B SB-211-2001
GB/T 3191-2010
ASME SEC II B SB-221-2001
ASME SEC II B SB-234-2001
GB/T 3198-2010
ASME SEC II B SB-241/SB-
241M-2001
GB/T 5154-2010
ASME SEC II B SB-308/SB-
308M-2001
JG 175-2011
GB/T 6893-2010
E1976-2005
ANSI B894-1999
B210M-2005
ANSI B669-1997
B491/B491M-2006
ANSI B750-1999
B221M-2007
B211M-2003
E1793-2005
ANSI B791-1997
E2422-2005
B209-2007
G139-2005
B94-2007
B37-2008
B480-1988(2010)
B909-2000(2006)
B317/B317M-2007
B247-2009
B750-2009
B179-2010
B947-2006
B557-2010
B313/B313M-2009
B308/B308M-2010
B831-2005
B234-2010
B769-2007
B209M-2007
B953-2007
B26/B26M-2009
B557M-2010
E1251-2007
B941-2010
B744/B744M-2005
B843-2007
D6353-2006
B776-2007
B403-2007
B327-2009a
B93/B93M-2009
E1977-2005
B373-2000(2006)
B210-2004
B107/B107M-2007
B316/B316M-2010
B928/B928M-2009
B547/B547M-2010
B736-2000(2006)
F1183-1996(2006)
B234M-2010
B91-2007
B954-2007
B918/B918M-2009
B881-2009
D5502-2000(2010)
B90/B90M-2007
B632/B632M-2008
B661-2006
B429/B429M-2010
D6906-2003(2010)e1
B241/B241M-2010
B479-2006
E1978-2005
B199-2007
B945-2006
B221-2008
F1594-1995(2003)
B646-2006a
E215-1998(2004)e1
B660-2008
B241/B241M-2002
B253-1987(2010)
F1513-1999(2003)
B211-2003
D6208-2007
JIS H4100 ERRATUM 3-2011
B247M-2009
铝合金国家、国际标准
中文名
氧化铝
铝及铝合金带材
半导体器件键合用铝硅合金(Alsil)丝
铝箔厚度的测定 称量法
铝及铝合金焊接管
铸造铝硅合金锭
铝中间合金锭
钛铜复合棒
铝及铝合金阳极氧化 术语
重熔用铝锭
重熔用铝锭
铸造铝合金
铝及铝合金废料,废件分类和技术条件
铝线锭
铝及铝合金热轧带材
铝及铝合金挤压型材尺寸偏差
变形铝及铝合金牌号表示方法
变形铝及铝合金化学成分分析取样方法
变形铝、镁及其合金加工制品拉伸试验用试样
镁合金牺牲阳极
水性铝膏
变形铝及铝合金状态代号
镁合金牺牲阳极
轨道车辆结构用铝合金挤压型材
压铸铝合金
铝合金箔
电解电容器用铝箔
电力电容器用铝箔
铸造镁合金锭
重熔用镁锭
铝及铝合金花纹板
原生镁锭
变形铝及铝合金化学成分
变形镁合金显微组织检验方法
铝及铝合金管材外形尺寸及允许偏差
铝及铝合金热挤压管 第1部分:无缝圆管
铝及铝合金热挤压管 第2部分:有缝管
铝钛合金丝
铝及铝合金挤压棒材
铝及铝合金板、带材的尺寸允许偏差
导电用铝线
铆钉用铝及铝合金线材
焊条用铝及铝合金线材
铝及铝合金箔
铝及铝合金加工产品 包装、标志、运输、贮存
金属钙
镁合金板
镁及镁合金板、带
镁合金热挤压棒
铝及铝合金波纹板
镁合金热挤压棒材
镁合金热挤压型材
镁合金热挤压型材
铝镁合金粉
铝镁合金粉
加工镁及镁合金牌号和化学成分
铝及铝合金轧制板材
金属钙及其制品
氟化铝
氟化钠
变形镁及镁合金牌号和化学成分
铝合金建筑型材 第1部分 基材
铝合金建筑型材 第2部分 阳极氧化、着色型材
铝及铝合金压型板
铝合金建筑型材 第3部分 电泳涂漆型材
工业用铝及铝合金热挤压型材
铝合金建筑型材 第4部分 粉末喷涂型材
铝合金建筑型材 第5部分 氟碳漆喷涂型材
铝及铝合金拉(轧)制无缝管
铝合金建筑型材
变形铝合金产品超声波检验方法
铝及铝合金冷轧带材
铝及铝合金模锻件的尺寸偏差及加工余量
铸造铝合金锭
热交换器用铜合金无缝管
高纯铝
钛及钛合金加工产品的包装、标志、运输和贮存
重熔用精铝锭
旋压无缝铝筒
特细铝粉规范
舰用LF15、LF16铝合金板材规范
航天用LD10铝合金冷拉(轧)管材规范
航天用LD10铝合金热挤压管材规范
铝合金装甲板规范
铝及铝合金冷拉管
铝及铝合金热挤压材
LC 19铝合金板材规范
LC19铝合金挤压型材规范
不可热处理强化的铝及铝合金板
铝及铝合金铆钉线材规范
舰用LF15、LF16铝合金挤压型材规范
2214、2014、2024及2017A铝合金棒材规范
铝塑布挤出复合材料
空-空导弹调制盘用单晶氟化镁
超低温用TA7-D钛合金棒材
红外制导"地-空"导弹用单晶氟化钙
装甲用铝合金板材规范
铝合金电导率和硬度要求
航空发动机压气机叶片用TC11钛合金棒材
透镜用多晶氟化镁
铝合金建筑型材 第1部分:基材
铝合金建筑型材 第2部分:阳极氧化、着色型材
铝合金建筑型材 第3部分:电泳涂漆型材
铝合金建筑型材 第4部分:粉末喷涂型材
铝合金建筑型材 第5部分:氟碳漆喷涂型材
铝合金建筑型材 第6部分:隔热型材
镁粉 第1部分 铣削镁粉
镁粉
重熔用铝锭
电工圆铝杆
水性铝膏
特殊环境条件 轨道车辆结构用铝合金挤压型材
镁及镁合金废料
铝及铝合金加工产品 包装、标志、运输、贮存
电解电容器用铝箔
铸造铝合金锭
军用铝合金、镁合金挤压型材截面手册
铝合金建筑型材
一般工业用铝及铝合金挤压型材
穿甲弹尾翼用铝合金挤压型材规范
氟化铝
铝及铝合金废料
氟钛酸钾化学分析方法 第3部分:氟钛酸钾含量的测定 硫酸高铁铵容量法
氟钛酸钾化学分析方法 第4部分:硅含量的测定 钼蓝分光光度法
氟钛酸钾化学分析方法 第5部分:钙含量的测定 火焰原子吸收光谱法
机载导弹发射架用铝合金异型管材规范
铝及铝合金花纹板
氟钛酸钾化学分析方法 第6部分:铁含量的测定 火焰原子吸收光谱法
氟钛酸钾化学分析方法 第7部分:铅含量的测定 火焰原子吸收光谱法
氟钛酸钾化学分析方法 第8部分:氯含量的测定 硝酸汞容量法
铝及铝合金波纹板
氟钛酸钾化学分析方法 第9部分:五氧化二磷含量的测定 钼蓝分光光度法
氟硼酸钾
氟钛酸钾化学分析方法 第2部分:湿存水含量的测定 重量法
铝及铝合金压型板
氟钛酸钾
氟硼酸钾化学分析方法 第10部分:五氧化二磷含量的测定 钼蓝分光光度法
氟硼酸钾化学分析方法 第1部分:试样的制备和贮存
铝及铝合金连续挤压管
重熔用镁锭 技术条件
氟硼酸钾化学分析方法 第2部分:湿存水含量的测定 重量法
焊接及焊接-轧制钛管
氟硼酸钾化学分析方法 第3部分:氟硼酸钾含量的测定 氢氧化钠容量法
氟硼酸钾化学分析方法 第4部分:镁含量的测定 火焰原子吸收光谱法
热交换器及冷凝器用焊接及焊接-轧制钛管
氟硼酸钾化学分析方法 第5部分:钙含量的测定 火焰原子吸收光谱法
氟硼酸钾化学分析方法 第6部分:硅含量的测定 钼蓝分光光度法
铝及铝合金加工产品的化学成分
氟硼酸钾化学分析方法 第7部分:钠含量的测定 火焰原子吸收光谱法
铝及铝合金挤压棒材
氟硼酸钾化学分析方法 第8部分:游离硼酸含量的测定 氢氧化钠容量法
氟硼酸钾化学分析方法 第9部分:氯含量的测定 硝酸汞容量法
高强度铝合金挤压棒
铝及铝合金热轧板
铝及铝合金板材的尺寸及允许偏差
导电用铝线
工业用纯铝箔
氟钛酸钾化学分析方法 第1部分:试样的制备和贮存
铝及铝合金加工产品的包装,标志,运输,贮存
铝及铝合金管 外形尺寸及允许偏差
铝及铝合金拉制圆线材
铝合金箔
电解电容器用铝箔
电力电容器用铝箔
铝及铝合金热挤压管
表盘及装饰用铝及铝合金板
纺织经编机盘片用铝合金模锻件
钛及钛合金牌号和化学成分
优质铝及铝合金热轧板
优质铝及铝合金冷轧板
钛及钛合金板材
钛带材
钛及钛合金丝
钛及钛合金无缝管
热交换器及冷凝器用无缝钛管
精制铝箔
优质铝及铝合金挤压棒材
氟化铝
氢氧化铝
铸造铝合金技术条件
铝及铝合金板材
钎接用铝合金板
重熔用铝锭技术条件
一般工业用铝及铝合金板、带材 第1部分:一般要求
一般工业用铝及铝合金板、带材 第2部分:力学性能
一般工业用铝及铝合金板、带材 第3部分:尺寸偏差
金属钙及其制品
重熔用电工铝锭
镁合金牺牲阳极
3C产品用镁合金薄板
铝土矿石
线缆编织用铝合金线
氧化铝
铝及铝合金中氢的测定 加热提取 热导法
铝合金建筑型材 第1部分:基材
铝及铝合金挤压型材尺寸偏差
铝合金建筑型材 第2部分:阳极氧化型材
铝合金建筑型材 第3部分:电泳涂漆型材
铝合金建筑型材 第4部分:粉末喷涂型材
船用铝合金板材
电子、电力电容器用铝箔
精铝丝
卡纸用铝及铝合金箔
泡罩包装用铝及铝合金箔
啤酒标用铝合金箔
软包装用铝及铝合金箔
软管用铝及铝合金箔
铝合金建筑型材 第5部分:氟碳漆喷涂型材
半刚性容器用铝及铝合金箔
SB 211壳体用919铝合金厚壁挤压管
2024铝合金预拉伸板
铝及铝合金化学转化膜质量检验
铝合金板材硬度与强度换算值
铝合金建筑型材阳极氧化与阳极氧化电泳涂漆工艺技术规范
稀土镁合金稀土总量、硅、镁的化学分析方法
船用变压器
方舱大板通用规范
埋地镁牺牲阳极试样试验室评价的试验方法
铝及铝合金电镀前表面准备方法
铝硅镁质匣钵
纺织经编机用铝合金线轴
重熔用铝稀土合金锭
表盘及装饰用纯铝板
冶金用二氧化钛技术条件
硅钡合金化学分析方法 高氯酸脱水重量法测定硅量
铝中间合金锭
出口镁锭检验规程
氧化铝
粉末静电喷涂铝合金建筑型材
LD30、LD31铝合金挤压用圆铸锭
高纯铝
钎接用铝合金板材
变形铝及铝合金铸锭及其加工产品缺陷 第1部分：变形铝及铝合金铸锭缺陷
变形铝及铝合金铸锭及其加工产品缺陷 第2部分：变形铝及铝合金板、带缺陷
易拉罐罐体用铝合金带材
变形铝及铝合金铸锭及其加工产品缺陷 第3部分：变形铝及铝合金箔缺陷
铝合金建筑型材图样图册
变形铝及铝合金铸锭及其加工产品缺陷 第4部分：变形铝及铝合金铸轧带缺陷
变形铝及铝合金铸锭及其加工产品缺陷 第5部分 管、棒、型、线缺陷
铝及铝合金杯突试验方法
铝合金韦氏硬度试验方法
铝及铝合金挤压扁棒
钎焊式热交换器用铝合金复合箔
印刷用PS版铝板基
可热处理强化的铝合金板
不可热处理强化的铝及铝合金板
铝及铝合金晶粒细化剂 第1部分:铝-钛-硼合金线材
可热处理强化的铝合金大规格板
铝及铝合金导体
轨道车辆结构用铝合金挤压型材配用焊丝
不可热处理强化的铝及铝合金大规格板
炼钢脱氧和部分铁合金用铝锭
铝及铝合金铸轧带材
铝及铝合金铸轧带材
瓶盖用铝及铝合金板、带材
瓶盖用铝及铝合金板、带材
铝合金花格网
空调器散热片用铝箔 第2部分 亲水铝箔
凿岩机用铝合金管材
有色电泳涂漆铝合金建筑型材
电泳涂漆铝合金建筑型材
电缆用铝箔
铝及铝合金彩色涂层板、带材
铝塑复合板用铝带
氟化钠
铝及铝合金压花板、带材
变形铝及铝合金用熔剂
铝及铝合金成分添加剂
活塞用4A11、4032合金挤压棒材
洗衣机用铝及铝合金板材
镁合金热挤压管材
钎焊式热交换器用铝合金箔
变形铝及铝合金圆铸锭
细晶铝锭
铝塑复合管用铝及铝合金带材
铸造铝阳极导杆
铝线锭
铝钛合金丝
轿车用高强度锻铝合金挤压圆棒材
出口金属镁颗粒检验规程
空调器散热片用铝箔 第1部分 素铝箔
进出口金属钠检验方法
煤矿支柱用铝合金棒材
钎焊用铝合金复合板
双零铝箔用冷轧带材
一般工业用铝及铝合金锻件
镁及镁合金挤制矩形棒材
变形铝及铝合金扁铸锭
半导体器件键合用铜丝
化学品氧化铝分类及牌号命名
百叶窗用铝合金带材
铁道货车用铝合金板材
一般工业用铝及铝合金拉制棒材
便携式工具用镁合金压铸件
变形镁及镁合金圆铸锭
印刷版基用铝板带
建筑用隔热铝合金型材 穿条式
高纯铝
手机及数码产品外壳用铝及铝合金板、带材
手机电池壳用铝合金板、带材
干式变压器用铝带、箔材
半导体器件键合用铝丝
铝及铝合金铸轧带材
变形镁及镁合金扁铸锭
镁合金焊丝
镁合金热挤压无缝管
镁及镁合金铸轧板材
铝合金建筑型材有机聚合物喷涂工艺技术规范
重熔用精铝锭
活塞裙用铝合金模锻件
电子行业机柜用铝合金板、带材
铝及铝合金深冲用板、带材
空调器散热片用铝箔 第1部分:基材
空调器散热片用铝箔 第2部分:涂层铝箔
衡器用铝合金挤压扁棒
天花吊顶用铝及铝合金板、带材
瓶盖用铝及铝合金板、带、箔材
表盘及装饰用铝及铝合金板
铝及铝合金彩色涂层板、带材
铝塑复合管用铝及铝合金带、箔材
铝合金衬塑复合管材与管件
铝合金中铜、铁、镁、锰、硅、钛、钒、锌和锆的测定 电感耦合等离子体原子发
射光谱法
进出口金属钠检验方法
汽车用铝合金板材
易拉罐盖料及拉环料用铝合金板、带材
电容器外壳用铝及铝合金带材
铝轧产品的尺寸公差
易拉罐罐体用铝合金带材
铝硬化剂的命名体系
铝轧产品的尺寸公差
铝金属基体复合材料的命名体系
电气钢性铝导管(ERAC)
铝材用合金和回火名称与符号注册系统
铝和铝合金.拉制方形管和矩形管.尺寸和形状公差
非合金铝的命名与符号系统
钛及钛合金的化学分析.用火焰原子吸收光谱法测定TA6V合金内铝、钒和铁的含量
钢铁.镀铝薄板.定尺长度和带卷
屋顶.铝或铝合金制线状型材
铝和铝合金.锻件.第2部分:机械性能和附加性能要求
铝和铝合金.通过熔化产生的母合金.规范
镁合金制半成品.矩型材挤制棒.尺寸和公差
铝和铝合金.液态金属.规范
镁和镁合金.镁和镁合金制阳极、锭和铸件.标识系统
铝和铝合金.废料.第10部分:使用过的铝制饮料罐组成的废料
铝和铝合金.废料.第14部分:旧的铝制包装件废料
铝及铝合金.锻造坯料.第2部分:机械性能
铝和铝合金.铸件.与食品接触的铸件的化学成分
铝和铝合金.废料.第8部分:铝分离工艺中切碎工艺产生的有色金属材料组成的废料
铝和铝合金.HF缝焊接管.第2部分:机械特性
铝和铝合金.HF缝焊接管.第4部分:正方型、长方型和定型管的形状和尺寸公差
铝和铝合金.薄板,带材和板材.第3部分:冷轧制品尺寸和形状公差
铝和铝合金.废料.第15部分:去除涂层的旧铝包装件废料
铝和铝合金.废料.第12部分:一种合金组成的车床切屑
铝和铝合金.HF缝焊接管.第1部分:检验和交货技术条件
铝和铝合金.废料.第11部分:铝铜散热器废料
铝和铝合金.锻制产品的化学成分和形状.第2部分:基于命名体系统的化学符号
铝和铝合金.废料.第9部分:有色金属切碎材料的铝分离工艺产生的废料
铝和铝合金.一般用途圆制品和圆坯.规格
镁和镁合金.镁合金锭和铸件
镁和镁合金.非合金镁
铝及铝合金.普通再轧坯料.第1部分:热轧制再轧坯料规范
镁和镁合金.铸造阳极用镁合金
铝和铝合金.锻造产品.生产压力设备用产品的特殊要求
铝和铝合金.薄板、带材和板材.第3部分:热轧制品的尺寸和形状公差
铝及铝合金.术语和定义.第2部分:化学分析
铝和铝合金.废料.第7部分:铸件组成的废料
铝和铝合金.结构铁路设备产品.检测和交货的技术条件.第2部分:板和薄板
铝和铝合金.废料.第5部分:同系列两种或多种锻造合金组成的废料
铝和铝合金.烹调器具生产用圆坯料.规范
铝和铝合金.生产包装和包装组件用产品的化学组分的特定要求
铝和铝合金.重熔、母合金和铸件用合金铝锭的命名.第2部分:基于命名系统的化学
符号
铝和铝合金.重熔、母合金和铸件用合金铝锭的命名.第1部分:数字命名系统
铝和铝合金.废料.第2部分:非合金铝废料
铝和铝合金.锻件.第3部分:尺寸和形式公差
铝和铝合金.再熔用非合金铝锭.规范
铝和铝合金.锻件.第1部分:检验和交货技术条件.
铝及铝合金.铸锻造坯料.第2部分:尺寸和形状公差(欧洲标准EN 604-2)
铝及铝合金.锻造坯料.第1部分:检验和交货技术条件
金属材料.关于产品质地的试验样品轴的命名
铝和铝合金.建筑铁路设施产品.检验和交货用技术条件.第3部分:铸件
铝和铝合金.铝合金无缝压力容器.等级.半成品：方坯
铝和铝合金.翅件.第3部分:尺寸和形状公差
铝和铝合金.施工工程用建筑产品.检验和交付技术条件
铝和铝合金.由锻制品获得冷挤压金属块.规范
铝和铝合金.翅件.第1部分:检验和交货的技术条件
铝和铝合金.箔材.第1部分:验收和交货的技术条件
铝和铝合金.箔材.第4部分:特殊性能要求
武器用热轧可焊接铝薄板.第2部分:燃烧试验法
铝和铝合金.箔材.第3部分:尺寸公差
铝和铝合金.锻制品的化学成分和形状.第5部分:标准锻制品汇编
铝和铝合金.拉线坯.第2部分:电气应用的专门要求
铝和铝合金.与食品接触的阳极化产物的要求
铝和铝合金.冷拉杆材/棒材和管材.第6部分:六角形棒材的尺寸和形状公差
铝和铝合金.冷拉杆材/棒材和管材.第1部分:检验和交付用技术条件
铝和铝合金.EN AW-6060和EN AW-6063挤制合金精密型材.第1部分:检验和交货
技术条件
铝和铝合金.冷拉杆材/棒材和管材.第7部分:无缝管的尺寸和形状公差
铝和铝合金.挤压杆材/棒材、管材和型材.第4部分:方形棒材的尺寸和形状公差
铝和铝合金.挤压杆材/棒材、管材和型材.第5部分:矩形棒材的尺寸和形状公差
铝和铝合金.冷拉杆材/棒材和管材.第4部分:方形棒材的尺寸和形状公差
铝和铝合金.冷拉杆材/棒材和管材.第5部分:矩形棒材的尺寸和形状公差
铝及铝合金.EN AW-6060和EN AW-6063挤制合金精密型材.第2部分:尺寸和形状
公差
铝和铝合金.挤压杆材/棒材、管材和型材.第2部分:机械性能
铝和铝合金.冷拉钢丝.第1部分:检验和交货技术条件
铝和铝合金.通用挤制圆形盘管.规范
铝和铝合金.薄板材、带材和厚板材.第2部分:机械性能
铝和铝合金.一般用途冷拉圆形盘管.规范
铝和铝合金.危险品存储和运输用容器的可焊接轧制品
铝和铝合金.冷拉杆材/棒材和管材.第3部分:圆棒材的尺寸和形状公差
屋顶.加筋或不加筋铝合金波形板
连续预涂漆铝带和铝板.要求
铝和铝合金.薄板材、带材和厚板材.第1部分:检验和交货技术条件
铝和铝合金.锻制产品.回火标志
铝及铝合金.试验方法.板材和带材的凸耳试验
铝和铝合金.拉制钢丝.第2部分:机械性能
铝和铝合金.废料.第1部分:一般要求、取样和试验
屋顶.铝合金加筋板.静力和动力试验
铝和铝合金.一般用途卷状圆挤制管.尺寸和形状公差
铝和铝合金.薄板材、带材和板材.第1部分:检验和交货技术条件
铝和铝合金.废料.第4部分:由一种可锻合金组成的废料
铝和铝合金.废料.第13部分:两种或多种合金组成的混合切屑
铝和铝合金.重熔、母合金和铸件用合金铝锭的命名.第3部分:化学成份的书写规则
铝和铝合金.罐、外壳和盖子用轧制产品.规范
铝和铝合金.拉拔丝材.第3部分:尺寸公差
镁合金制半成品.圆型材挤制棒.尺寸和公差
铝和铝合金.HF缝焊接管.第3部分:圆管的形状和尺寸公差
铸件.图像分析用平均截线的测量.硅含量5%-11%的铝铸件
铝及铝合金.术语和定义.第4部分:铝工业的残留物
铝和铝合金.通用彩色涂层的薄板材和带材.规范
铝和铝合金.箔材.第2部分:机械性能
铜和铜合金.切割钢带边缘区域残余应力的测定
连续预涂漆铝带和铝板.试验方法
镁合金制半成品.圆形挤制管.尺寸公差
镁和镁合金制半成品.回火标志
铝和铝合金.挤压杆材/棒材、管材和型材.第3部分:圆形棒材的尺寸和形状公差
铝及铝合金.普通再轧坯料.第2部分:冷轧制再轧坯料规范
铝及铝合金.术语和定义.第3部分:废料
铝和铝合金.挤压杆材/棒材、管材和型材.第6部分:六角形棒材的尺寸和形状公差
铝和铝合金.挤压杆材/棒材、管材和型材.第9部分:型材的尺寸和形状公差
铝和铝合金.挤压杆材/棒材、管材和型材.第1部分:检验和交货的技术条件
铝和铝合金.废料.第16部分:刮削、碎屑、小金属棒和金属器件组成的废料
武器用热轧可焊接铝薄板.第1部分:交货技术条件
铝和铝合金.术语和定义.第1部分:一般术语
铝和铝合金.废料.第3部分:导线和电缆废料
铝和铝合金.锻件.生产与食品接触的物品所需半成品的化学成分
铝和铝合金.冷拉棒材/杆材和管材.第8部分:带孔管材的尺寸和形状公差
铝和铝合金.翅件.第2部分:机械特性
铝和铝合金.挤压杆材/棒材、管材和型材.第7部分:无缝管的尺寸和形状公差
铝和铝合金.踏脚板.规范
铝及铝合金.铸锻造坯料.第1部分:检查和交货技术条件(欧洲标准EN 604-1)
铝和铝合金.冷拉杆材/棒材和管材.第2部分:机械性能
铝和铝合金.废料.第6部分:两种或多种可锻合金组成的废料
铝和铝合金.结构性铁路设施用产品.检查和交货的技术条件.第1部分:挤压制品
铝及铝合金.锻造锻坯.第3部分:尺寸和形状公差
镁合金铸件
镁合金压铸件
铸造用镁合金锭
压铸用镁合金锭
电气用未加工铝锭
铝和铝合金箔
铝和铝合金的原子吸收光谱分析方法
铝、镁及其合金.回火标识
勘误
铝和铝合金薄板材、带材和板材
铝和铝合金涂漆和烤漆薄板及带材
铝和铝合金杆材、棒材和丝材
铝和铝合金挤压管材和冷拔管材
镁合金薄板、板材、带材和卷材薄板
铝和铝合金中铍的测定方法
铝和铝合金挤压型材
镁合金棒
镁合金挤压型材
铝和铝合金中镓的测定方法
再生铝锭（修改件1）
铝及铝合金焊接管（修改件1）
镁合金无缝管
铝和铝合金箔（修改件1）
铝锭
再生铝锭
精铝锭
高纯度铝箔（修改件1）
硅钙合金
铝和铝合金锻件
铝和铝合金废料分类标准
高纯度铝箔
铝板制品
勘误
勘误
铝合金压铸件
钛及钛合金铸件
压铸用铝合金锭
勘误
镁合金薄板材平均粒度的测定方法
镁和镁合金中锡的测定方法
勘误
未加工的铝锭(修改件1)
镁和镁合金中铅的测定方法
勘误表
电气用未加工的铝锭(修改件1)
勘误表
勘误表
铝板制品(修改件1)
勘误表
勘误表
精铝锭(修改件1)
铝合金砂模铸件 参比试棒
加工铝和铝合金冷拉线材 第1部分:验收及交货的技术条件
铸造用铝合金锭
铝生产用碳素材料 单个材料的取样方案和取样 第1部分:阴极块
铝合金铸件 目视法评定针孔
铝合金铸件 X射线照相试验
铝合金的腐蚀.抗应力腐蚀裂纹的测定
加工铝和铝合金薄板、带、厚板 第2部分:力学性能
镁和镁合金.回炉料.要求、分类和验收
镁和镁合金.镁合金铸锭和铸件
铝生产用碳素材料 煅烧焦和煅烧碳产品 用艾氏卡法测定全硫含量
铝生产用碳素材料 电极用沥青 喹啉不溶物中C/H比的测定
铝生产用碳素材料 电极用沥青 挥发分的测定
铝生产用碳素材料 预焙阳极和阴极块 用比重瓶法测定二甲苯密度
镁和镁合金 纯镁 化学成分
铝生产用碳素材料 未煅烧和煅烧焦 火焰原子吸收光谱法测定痕量元素
铝生产用碳素材料 电极用生焦和煅烧焦 X射线荧光分析
加工铝和铝合金挤压棒/条材、管材和型材 第5部分:挤压圆形、正方形和六角形棒
材 尺寸和形状公差
加工铝和铝合金薄板、带、厚板 第1部分:交货和验收的技术条件
加工铝和铝合金 冷拉圆棒材 尺寸和形状公差(直径采用负公差)
铝生产用碳素材料 单个材料的取样方案和取样 第2部分:预焙阳极
加工铝和铝合金挤压棒/条材、管材和型材 第3部分：挤压矩形棒材 形状和尺寸公
差
加工铝和铝合金冷拉棒/条材和管材 第4部分:拉制矩形棒材 尺寸和形状公差
加工铝和铝合金冷拉棒/条材和管材 第1部分:验收及交货的技术条件
镁合金 圆棒材和管材 尺寸偏差
加工铝和铝合金薄板、带、厚板 第4部分:薄板和厚板 尺寸和形状公差
铝和铝合金.化学成分
铝和铝合金.重熔用合金铸锭.规范
镁和镁合金.铸件阳极用镁合金
铝和铝合金.铸件.化学成分和机械性能
镁合金砂模铸件 参比试棒
铝合金冷硬铸件 参比试棒
铝生产用碳素材料 电极用煅烧焦 颗粒电阻率的测定
加工铝和铝合金冷拉棒/条材和管材 第2部分:力学性能
加工铝和铝合金挤压棒/条材、管材和型材 第2部分:力学性能
加工铝和铝合金 拉制圆棒材 尺寸和形位(直径采用对称正负偏差)偏差
加工铝和铝合金挤压棒/条材、管材和型材 第1部分:验收和交货的技术条件
加工铝和铝合金挤压棒/条材、管材和型材 第4部分:挤压型材 尺寸和形状公差
铝和铝合金 箔材和薄带材 尺寸公差
重熔用非铝合金锭.分类及成分
主要用于铝生产的氧化铝.在300℃和1000℃时质量损失的测定
加工铝和铝合金薄板、带、厚板 第3部分:带材 尺寸和形状公差
镁和镁合金.镁合金铸锭和铸件.修改件1:附加合金
铝和铝合金.再熔炼用合金铸锭.规范.技术勘误1
铝和铝合金.锻造制品.回火号
加工铝和铝合金冷拉棒/条材和管材 第5部分:冷拉方形和六角形棒材 尺寸和形状公
差
铝生产用碳素材料 电极用生焦和煅烧焦 松(紧装)密度的测定
铝生产用碳素材料 煅烧焦 用实验室振动磨测定粒度稳定性
铝生产用碳素材料.单个材料的取样方案和取样.第3部分:侧墙砖
镁和镁合金.锻造的镁合金
热处理型铝镁硅系铝合金母线材料的建议
铝和铝合金.挤压锻坯料.第1部分:验收和交货技术条件
铝和铝合金.一般用途的粗轧带材.第1部分:热轧粗轧带材的规范
铝和铝合金.废料.第10部分:使用过的铝制饮料罐
铝和铝合金.废料.第16部分:浮渣、碎屑、小金属棒和金属碎粒废料
铝及铝合金.结构性铁路设施用制品.检验和交换用技术条件.第1部分:挤制产品
铝和铝合金.试验方法.薄板和带材的端部花边试验
铝和铝合金.重熔、母合金和铸件用合金铝锭的标识.第2部分:基于标识系统的化学
符号; 德文版本 EN 1780-2:2002
铝和铝合金.液态金属.规范; 德文版本 EN 577:1995
铝和铝合金.废料.第4部分:单一锻造合金废料
铝和铝合金.废料.第2部分:非合金铝废料
铝和铝合金.废料.第13部分:两种或多种合金混合车床切屑
镁和镁合金.镁合金锭和铸件
铝和铝合金.通用粗轧带材.第2部分:重轧铝胚料的规范
锌和锌合金.取样方法.规范
铝和铝合金.带材、薄板、板材.第3部分:冷轧制品尺寸形状公差
铝及铝合金.阳极化处理.第11部分:20? 、45?、60?或85度角阳极氧化层的镜面反
射系数和镜面光泽度测量
铝和铝合金.术语和定义.第1部分:一般术语.三种语言的版本
铝和铝合金.锻件.第3部分:尺寸和形状公差
铝及铝合金.阳极化处理.第12部分:用积算球光度表测量铝表面的反射特性
铝和铝合金.术语和定义.第4部分:铝工业的残留物
铝及铝合金.阳极氧化.第19部分:斑蚀评定等级系统.格栅法
铝和铝合金.废料.第8部分:铝分离用有色金属碎料
铝和铝合金.HF缝焊管.第1部分:检验和交货技术条件
铝和铝合金.废料.第9部分:有色金属碎料经铝分离处理后的剩余废料
铝和铝合金.普通绕涂板材和带材.规范
铝和铝合金.由锻制品获得冷挤压金属块.规范
铝和铝合金.铸件.与食品接触的铸件的化学成分
铝和铝合金.散热片坯料.第1部分:检验和交货技术条件
铝和铝合金.拉制钢丝.第3部分:尺寸公差.英文版本DIN EN 1301-3-2008
铝和铝合金.挤压杆材/棒材、管材和型材.第3部分:圆棒材的尺寸和形状公差
铝和铝合金.冷拉杆材/棒材和管材.第6部分:六角形棒材的尺寸和形状公差
铝和铝合金.锻制品的化学成分和形状.第5部分:标准锻制品汇编
铝和铝合金.冷拉杆材/棒材和管材.第4部分:方形钢的尺寸和形状公差
铝和铝合金.挤压杆材/棒材、管材和型材.第8部分:带孔管材的尺寸和形状公差
铝及铝合金.冷拉杆材/棒材和管材.第3部分:圆棒材的尺寸和形状公差
铝和铝合金.冷拉杆材/棒材和管材.第2部分:机械性能
铝和铝合金.拉制钢丝.第1部分:检验和交付用技术条件.英文版本DIN EN 1301-1-
2008
铝和铝合金.冷拉杆材/棒材和管材.第8部分:带孔管材的尺寸和形状公差
铝和铝合金.薄板材、带材和厚板材.第2部分:机械特性
铝和铝合金.拉拔坯料.第1部分:检验和交货的一般要求和技术条件
铝和铝合金.挤压杆材/棒材、管材和型材.第9部分:轮廓、尺寸和形状公差
铝和铝合金.废料.第15部分:去除涂层的用过的铝包装物废料
铝和铝合金.电工用薄板材,带材和板材,英文版本DIN EN 14121-2009-09
铝和铝合金.通过熔炼生产的母合金.规范; 德文版本 EN 575:1995
铝和铝合金.废料.第7部分:铸件废料
铝和铝合金.拉制坯料.第3部分:机械用特殊要求(不包括焊接)
铝和铝合金.废料.第1部分:一般要求、取样和试验
铝和铝合金.踏板.规范
铝和铝合金.挤压杆材/棒材、管材和型材.第6部分:六角形棒材的尺寸和形状公差
铝和铝合金.挤压杆材/棒材、管材和型材.第1部分:检验和交货技术条件
铝和铝合金.箔.第3部分:尺寸公差
铝和铝合金.拉制钢丝.第2部分:机械性能.英文版本DIN EN 1301-2-2008
铝和铝合金.EN AW-6060和EN AW-6063合金中挤压的精密型材.第1部分:检验和
交货技术条件
铝和铝合金.挤压杆材/棒材、管材和型材.第4部分:方形棒材的尺寸和形状公差
铝和铝合金.锻件.第1部分:交货技术要求
铝和铝合金.阳极处理.第10部分:用喷砂试验测量阳极化氧化涂层的特定平均耐磨
性能
铝和铝合金.锻制品.回火状态标识符号
铝和铝合金.废料.第14部分:旧的铝制包装件废料
铝和铝合金.拉拔坯料.第2部分:电器的特殊要求
铝和铝合金.通用挤制圆盘管.规范
铝和铝合金.重熔、母合金和铸件用合金铝锭的标识.第3部分:化学成分的书面规则;
德文版本 EN 1780-3:2002
铝和铝合金.轧制罐、塞子和盖子.规范
铝及铝合金.结构性铁路设施用制品的检验和交换用技术条件.第2部分:板和薄板
铝和铝合金.挤压杆材/棒材、管材和型材.第2部分:机械性能
铝和铝合金.冷拉杆材/棒材和管材.第1部分:检验和交货技术条件
铝和铝合金.危险货物的储存和运输用罐的可焊接轧制品
铝和铝合金.重熔、母合金和铸件用合金铝锭的标识.第1部分:数字标识系统; 德文
版本 EN 1780-1:2002
铝和铝合金.结构铁路设施用制品.检验和交换用技术条件.第3部分:铸件
铝和铝合金.拉拔坯料.第4部分:焊接用特殊要求
铝和铝合金.带材、薄板和板材.第3部分:热轧制品的尺寸和外形公差
铝和铝合金.冷拉杆材/棒材和管材.第5部分:矩形棒材的尺寸和形状公差
铝及铝合金.通用冷拉制圆盘管.规范
铝和铝合金.冷拉杆材/棒材和管材.第7部分:无缝管的尺寸和形状公差
铝和铝合金.箔.第2部分:机械性能
铝和铝合金.锻制产品的化学成分和外形.第3部分:产品的化学成分和外形.英文版本
DIN EN 573-3-2009-08
铝和铝合金.精锻制品的化学成分和形式.第2部分:基于标识系统的化学符号; 德文
版本 EN 573-2:1994
铝和铝合金.一般用途的圆片和圆片坯料.规范; 德文版本 EN 941:1995
铝和铝合金.挤压棍棒,管和截面图.第7部分:无缝管尺寸公差和形状,英文版本DIN
EN 755-7:2009-07
铝和铝合金.废料.第6部分:两种或多种锻造合金废料
铝和铝合金.再熔用非合金铝锭.规范
铝和铝合金.铸锻毛坯.第1部分:交货技术条件
铝和铝合金.术语和定义.第3部分:废料
铝和铝合金.热交换器坯料.第2部分:机械性能
铝和铝合金.锻造产品.压力设备生产装备特殊要求
铝和铝合金.铝制品的环境方面.标准中环境内容的一般导则
铝和铝合金.箔.第1部分:交货技术条件
铝和铝合金.铸件.化学成份和机械性能.德文版本EN 1706-2010
铝和铝合金.铸锻毛坯.第2部分:尺寸和形状公差
铝和铝合金.废料.第12部分:单一合金车床切屑
铝和铝合金.锻造坯料.第3部分:尺寸和形状公差
铝和铝合金.废料.第3部分:导线和电缆废料
铝和铝合金.锻造产品的化学成分和形状.第1部分:编号标识系统
铝和铝合金.挤压杆材/棒材、管材和型材.第5部分:矩形棒材的尺寸和形状公差
镁和镁合金.镁和镁合金阳极、锭坯和铸件.命名制度
铝和铝合金.HF缝焊管.第4部分:正方形、长方形和成形管的尺寸和形状公差
铝和铝合金.结构铁路设施用制品.检验和交换用技术条件.第4部分:锻制
铝和铝合金.锻件.第2部分:机械性能和补充性能要求; 德文版本 EN 586-2:1994
铝和铝合金.锻造加工坯料.第2部分:机械性能
铝和铝合金.废料.第5部分:同批两种或多种锻造合金废料
铝和铝合金.废料.第11部分:铝铜散热器废料
铝和铝合金.锻件.与食品接触的物品制造用半成品的化学成分
铝和铝合金.厨房器具生产用圆片和圆片坯料.规范; 德文版本 EN 851:1995
铝和铝合金.HF缝焊管.第2部分:机械性能
铝和铝合金.HF缝焊管.第3部分:圆管尺寸和形状公差
铝和铝合金.热交换器坯料.第3部分:公差、尺寸和形状
铝和铝合金.生产包装和包装组件用产品的化学组分的特定要求
铝和铝合金.箔.第4部分:特殊性能要求
铝和铝合金.EN AW-6060和EN AW-6063合金中挤压的精密型材.第2部分:尺寸和
形状公差
铝和铝合金.回炼用合金铝锭.规范.德文版本EN 1676-2010
铝和铝合金.施工作业用结构产品.检验和交付技术条件.德文版本EN 15088-2005
超导性.第3部分:电子特性测量.微波频率下超导体表面电阻
铝和铝合金.箔.第4部分:特殊性能要求
铝和铝合金.箔.第3部分:尺寸公差
奶制品容器用包覆铝箔和铝带规范.第1部分:玻璃容器用包覆铝箔
铝和铝合金.重熔用合金铸锭.规范
铝和铝合金.箔.第1部分:检验和交付用技术条件
铝和铝合金.锻件.尺寸和形状公差
飞行控制可调节终端配合铝合金杆.尺寸和荷载
制铝工业用炭素材料取样与试验方法.第2部分:电极用焦炭.第12节:碎焦粒度分布测
定
AL-P7009-T74511铝合金.对周边粗晶粒控制的a或D为125mm 挤压棒材和型材
铝和铝合金.挤压杆材/棒材、管材和型材.检验和交货技术条件
富镁合金的防腐蚀保护.规范
铝和铝合金.挤压杆材/棒材、管材和型材.圆棒材的尺寸和形状公差
铝和铝合金.绘图台.电气应用的特殊要求
铝和铝合金.通用卷绕涂层薄板材和带材.规范
铝和铝合金.锻造冲挤金属棒.规范
铝和铝合金.散热片坯料.第3部分:尺寸和形状公差
铝和铝合金.挤压的杆材/棒材、管材和型材.方棒材的尺寸和形状公差
铝及铝合金.EN AW-6060和EN AW-6063合金的挤压精密型材:检验和交付用技术
条件
铝和铝合金.冷拉杆材/棒材和管材.检验和交货用技术条件
铝和铝合金.挤压的杆材/棒材、管材和型材.矩形棒材的尺寸和形状公差
铝和铝合金.挤压的杆材/棒材、管材和型材.无缝管的尺寸和形状公差
铝和铝合金.冷拉杆材/棒材和管材.机械特性
铝和铝合金.一般用途的冷拉、圆形盘管.规范
铝和铝合金.挤压的杆材/棒材、管材和型材.出水孔管的尺寸和形状公差
铝和铝合金.薄板材、带材和厚板材.机械性能
铝和铝合金.线坯.第1部分:检验和交付的一般要求和技术条件
铝及铝合金试验方法.薄板材和带材的耳索试验
铝和铝合金.液体金属.规范
铝和铝合金.拉制坯料.机械用途(不包括焊接)特殊要求
AL-P7009-T74511铝合金.a或D≤125mm的挤压棒材和型材
铝和铝合金.术语和定义.化学分析
AL-P7075-T651铝合金.板材6mm＜a≤80mm
铝和铝合金.薄板材、带材和厚板材.检验和交货技术条件
铝及铝合金.再熔用的合金铸锭.规范
铝和铝合金.铸件.化学成分和机械特性
铝和铝合金.通用挤压圆盘管.规程
铝和铝合金.电工用薄板材,带材和厚板材
普通工程用锻造铝和铝合金规范(补充系列).第10部分:5454型冷拔管
镁及镁合金.非合金镁
铝和铝合金.圆形材料和圆坯料的通用要求.规范
铝-镁(1.0)-硅(0.6)-铜(0.28)-铬(0.2)合金管规范(溶液处理和人工时效:未经液压试
验)(厚度小于10mm)
锻铝和铝合金的检验、试验和验收程序
铝和铝合金.废料.同一系列两种或多种锻造合金的废料
铝和铝合金
铝和铝合金.结构性铁道设施用产品.检验和交货技术条件.锻制品
主要用于铝生产的氧化铝.在300鳦和1000鳦时质量损失的测定
铝和铝合金.金属罐、密封物和盖子用轧制品.规范
铝和铝合金的阳极氧化.阳极氧化涂层厚度测定.利用分裂光束显微镜的无损检测
镁和镁合金.锻造镁合金
铝和铝合金.拉制钢丝.检验和交付用技术条件
铝合金和锻铝合金硫酸阳极化规范
AL-P 7009-T74铝合金.20mm≤a≤150mm手工锻件
铝-铜-镁-硅-锰合金的整体冷锻制铆钉用金属线规范(用于溶解处理和自然老化状
态)(直径不超过10 mm)(Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)(2014A)
铝和铝合金产品试验方法.第1部分:锻铝合金电导率的测定
铝和铝合金铬硫酸液
铝合金锻坯和锻件规范.技术规范.一般要求
铝和铝合金.废料.铝铜散热器的废料
铝-镁(0.8)硅(1)-锰(0.7)合金板规范(溶液处理,拉伸控制及沉淀处理)(厚度小于
25mm)(适用于焊接)
铝和铝合金.踏板.规范
铝和铝合金.术语和定义.铝工业残留物
铝和铝合金的阳极氧化.阳极氧化涂层变形裂解耐受性评定
电气用锻铝.带拉拔或轧制边的带材
AL-P7075-T73511铝合金.a或D≤100mm的挤压棒材和型材
铝-镁(0.8)-硅(1)-锰(0.7)合金薄板材和带材规范(溶液处理和沉淀处理)(适用于焊接)
AL-P2014A T6或T62铝合金.0.4mm-6mm的薄板及带材
铝和铝合金.结构性轨道用制品.检验和交货技术条件.板材和薄板材
铝和铝合金.结构性铁路设施用产品.检验和交货用技术条件.铸件
铝及铝合金.合金EN AW-6060和EN AW-6063挤压的精密型材:尺寸和形状公差
铝和铝合金.挤压杆材/棒材、管材及型材.型材的尺寸和形状公差
铝和铝合金.铝制品的环境效应.标准中包含环境效应的一般指南
铝和铝合金.拉制钢丝.尺寸公差
铝及铝合金.铸锻件坯.尺寸和形位公差
铝和铝合金.废料.铝制废饮料罐的废料
铝-铜(4.4)-镁(1.5)-锰(0.6)合金铝涂层薄板材和带材规范(由用户进行溶液处理)
铝和铝合金.散热片坯料.第2部分:机械特性
铝和铝合金.废料.铸件废料
镁和镁合金.镁合金铸锭和铸件
铝和铝合金.结构性铁道制品.检验和交货技术条件.挤压制品
铝涂层铝-铜(4.4)-镁(0.5)-硅(0.8)-锰(0.8)合金薄板材和带材规范(固溶处理和人工
时效的)
铝和铝合金.危险品的存储和运输槽罐用可焊接轧制产品
99%铝管规范(冷拔:无缝:液压试验)(壁厚不超过12mm)
AL-P6082-T6铝合金.a或D≤200mm的挤压棒材和型材
铝和铝合金产品试验方法.第5部分:复合半成品的包层厚度和铜扩散的测定
镁及镁合金.铸造阳极用镁合金
铝和铝合金.第2部分:箔.机械性能
铝和铝合金.化学成分
铝和铝合金.冷拉杆材/棒材和管材.圆棒材的尺寸和形状公差
铝和铝合金.挤压杆材/棒材、管材和型材.机械性能
铝和铝合金.冷拉杆材/棒材和管材.出水孔管材尺寸和形状公差
铝和铝合金.包装和包装元件制造用产品的化学成分的专门要求
铝和铝合金.通用重轧胚料.热轧重轧胚料规范.
铝和铝合金.拉制钢丝.机械性能
铝-铜(4.4)-镁(1.5)-锰(0.6)合金铝涂层薄板和带材规范(溶液处理和室温时效)
铝和铝合金.废料.从粉碎的非铁材料中分离出的铝废料
AL-P7009-T7452铝合金.40mm≤a≤150mm的手工锻件
铝和铝合金.废料.废铝包装件
铝和铝合金.术语和定义.废料
铝和铝合金.施工作业用结构产品.检验和交付用技术条件
铝和铝合金的阳极氧化.点状腐蚀评估的评级系统.图版法
铝和铝合金.挤压的杆材/棒材、管材和型材.六角形棒材的尺寸和形状公差
铝-镀铝-铜(4.4)-镁(0.5)-硅(0.8)-锰合金紧公差薄板材和带材规范(固溶处理和人工
时效的)
电工用锻铝与铝合金规范.棒材、挤压圆管材和型材
制铝工业用炭素材料抽样和试验方法.第3部分:电极.第2节:阴极块和预焙阳极密度
测定
铝及铝合金.铸锻件坯.检查和交付技术状态
铝和铝合金.废料.浮渣、渣滓、疤皮和金属粒子的废料
铝和铝合金.废料.一般要求、取样和试验
铝和铝合金.通用重轧胚料.冷轧重轧胚料规范.
铝和铝合金.冷拉杆材/棒材和管材.方棒材的尺寸和形状公差
铝和铝合金.冷拉杆材/棒材和管材.无缝管尺寸和形状公差
铝和铝合金.海上(造船业,海运和近海工程)用煅造和铸造产品规范
铝-镁(0.8)硅(1)-锰(0.7)合金管规范(溶液处理和沉淀处理)(壁厚度小于10mm)(适用
于焊接)
铝和铝合金的阳极氧化.稀薄阳极氧化涂层连续性处理.硫酸铜试验
铝制造用炭素物的抽样和试验方法.电极焦炭.煅烧焦碳水含量的测定
铝合金AL-P6082-T6.对周边粗晶粒控制的挤压棒材和型材.a或D≤200mm,
采用硫酸处理工艺的钛和钛合金阳极涂层规范
铝和铝合金.薄板材、带材和板材.冷轧制品的形状和尺寸公差
铝及铝合金.锻坯.机械性能
铝和铝合金.废料.已去除废铝包装件中涂层的铝废料
铝和铝合金.废料.单一锻造合金的废料
铝和铝合金.锻件.与食品接触的产品制造用半成品的化学成分
铝和铝合金.化学分析.金属熔料抽样
铝和铝合金.锻压产品.生产压力设备用产品专门要求
铝和铝合金.叶片坯料.第1部分:检验和交付技术条件
铝和铝合金.锻制品.回火标志
铝和铝合金.线坯.第4部分:焊接应用的特殊要求
AL-P2014A-T4511铝合金.a或D≤200mm的挤压棒材和型材
铝和铝合金.再熔非合金铝锭.规范
99%铝板材和带材规范(强度符号-H14或H24)
铝和铝合金.冷拉杆材/棒材和管材.六角形棒材的尺寸和形状公差
铝和铝合金.锻制品的化学成分和形状.标准锻制品汇编
铝合金和锻铝合金铬酸阳极化规范
铝合金AL-P2024-T3511.对周边粗晶粒控制的1,2 mm 或D≤150mm挤压棒材和型
材.
铝合金2117通用头型实心铆钉.英制系列
铝和铝合金.熔铸母合金.规范
AL-P7075-T7351铝合金.6mm≤a或D≤75mm拉制棒材
铝及铝合金.锻坯.检验和交付技术状态
制铝工业用炭素材料取样与试验方法.第1部分:电极硬柏油脂.第12节:介晶相含量测
定
铝和铝合金.锻件.检验和交付技术状态
铝-镁(0.8)-硅(1)-锰(0.7)合金锻坯和锻件规范(溶液处理和沉淀处理)(适用于焊接)
铝-镁(1.0)-硅(0.6)-铜(0.28)-铬(0.2)合金管规范(溶液处理和人工时效:液压试验)(壁
厚度小于10mm)
铝-铜(4.4)-镁(0.5)-硅(0.7)-锰(0.8)合金管材规范(固溶处理和室温效)(壁厚度小于
10mm)
铝-铜(4.4)-镁(0.5)-硅(0.8)-锰(0.8)合金紧公差薄板材和带材规范(溶液处理和人工
时效)
镁-铝(6.0)-锌(1.0)合金棒材和挤压型材规范(直径不超过150mm或较小截面尺寸)
99.5%整体冷锻铆钉用铝丝规范(直径不超过10mm)
铝-镁合金板材和带材规范(强度符号-H16或H2)
铝和铝合金.再熔、母合金和铸件的非合金和合金铝锭的命名.化学成份的书写规则
铝和铝合金.废料.含两种或多种合金的混合车床切屑
规范.铝-锌(5.6)-镁(2.5)-铜(1.6)-铬(0.22)合金冷压手工锻件(溶液处理和人工时效至
过老化条件)
铝和铝合金.铸件.与食品接触用铸件的化学成分
铝和铝合金.片材、带材和板材.热轧制品的形状和尺寸公差
AL-P2014-T6511铝合金.a或D≤150mm的挤压棒材和型材
铝和铝合金.废料.含两种或多种锻造铝合金的废料
AL-P2024-T3511铝合金.1,2mm≤a或D≤150mm的挤压棒材和型材
铝和铝合金.锻件.机械特性和附加特性要求
铝和铝合金.术语和定义.通用术语
铝和铝合金.废料.为实施铝分离加工，含粉碎加工产生的 非铁材料废料
铝和铝合金.废料.废金属丝和电缆
铝和铝合金.废料.非合金废铝
铝和铝合金.废料.单一合金的车床切屑
铝及铝合金.锻坯.尺寸和形状公差
铝和铝合金.锻制产品化学组成和外形.数字标示系统
AL-P 7009-T74铝合金.3mm≤a≤150mm模锻件
铝及铝合金拉制六角形棒材.公差等级h11.对边宽度为7mm a 50mm.尺寸
铝和铝合金.再熔、母合金和铸件用非合金和合金铝锭的命名.用化学符号表示命名
系统
铝和铝合金.再熔、母合金和铸件的非合金和合金铝锭的命名.数字命名系统
铝和铝合金.锻制品.烹调器具用圆形材料和圆坯料规范
镁和镁合金.回炉料.要求、分类和验收
铝基和镁基铸锭和铸件的检验、试验和验收程序
铝-铜(4.4)-镁(0.5)-硅(0.7)-锰(0.8)合金棒材和挤压型材规范(固溶处理和人工时
效)(直径不超过200mm或较小的截面尺寸)
铝和铝合金.锻制产品的化学成分和外形.基于化学标志的命名系统
铝涂层铝-铜(4.4)-镁(0.5)-硅(0.8)-锰(0.8)合金紧公差薄板材和带材规范(溶液处理
和室温时效)
铝-镁合金板材和带材规范(强度符号-H12或H22)
铝-镁合金板材和带材规范(强度符号-0)
99%铝锻坯、棒材、挤压型材和锻件规范
99%铝板材和带材规范(强度符号-0)
铝-铜(5.0)-镍(1.5)-锰(0.5)-钛(0.2)-锆(0.2)-钴(0.2)-锑(0.2)合金铸锭和铸件规范(溶
液处理和人工时效)
铝和铝合金.废料.第10部分:使用过的铝制饮料罐
铝和铝合金.废料.第16部分:浮渣、碎屑、小金属棒和金属碎粒废料
铝和铝合金.一般用途的粗轧带材.第1部分:热轧粗轧带材的规范
铝和铝合金.废料.第4部分:单一锻造合金废料
铝和铝合金.废料.第2部分:非合金铝废料
铝和铝合金.废料.第13部分:两种或多种合金混合车床切屑
铝和铝合金.通用粗轧带材.第2部分:重轧铝胚料的规范
铝和铝合金.术语和定义.第1部分:一般术语.三种语言的版本
锌和锌合金.取样方法.规范
铝及铝合金.阳极化处理.第11部分:20? 、45?、60?或85度角阳极氧化层的镜面反
射系数和镜面光泽度测量
铝和铝合金.术语和定义.第4部分:铝工业的残留物
铝及铝合金.阳极氧化.第19部分:斑蚀评定等级系统.格栅法
铝及铝合金.阳极化处理.第12部分:用积算球光度表测量铝表面的反射特性
铝和铝合金.废料.第8部分:铝分离用有色金属碎料
铝和铝合金.废料.第9部分:有色金属碎料经铝分离处理后的剩余废料
铝和铝合金.拉制钢丝.第3部分:尺寸公差.英文版本DIN EN 1301-3-2008
铝及铝合金.结构性铁路设施用制品.检验和交换用技术条件.第1部分:挤制产品
铝和铝合金.拉制钢丝.第1部分:检验和交付用技术条件.英文版本DIN EN 1301-1-
2008
铝和铝合金.普通绕涂板材和带材.规范
铝和铝合金.废料.第15部分:去除涂层的用过的铝包装物废料
挤压镁型材.允许偏差
开关设备.汇流条用挤压槽形铝型材
铝和铝合金.电工用薄板材,带材和板材,英文版本DIN EN 14121-2009-09
铝和铝合金.废料.第1部分:一般要求、取样和试验
铝和铝合金.踏板.规范
铝和铝合金.拉制钢丝.第2部分:机械性能.英文版本DIN EN 1301-2-2008
铝和铝合金.EN AW-6060和EN AW-6063合金中挤压的精密型材.第1部分:检验和
交货技术条件
电工用铝.第2部分:管、杆/棒和型材.交货技术条件
铝和铝合金.废料.第7部分:铸件废料
铝和铝合金.废料.第14部分:旧的铝制包装件废料
铝和铝合金.阳极处理.第10部分:用喷砂试验测量阳极化氧化涂层的特定平均耐磨
性能
锻造铝和锻造铝合金的阳极氧化产品 交货技术条件
铝和铝合金.通用挤制圆盘管.规范
铝及铝合金.结构性铁路设施用制品的检验和交换用技术条件.第2部分:板和薄板
铝及铝合金.通用冷拉制圆盘管.规范
铝和铝合金.结构铁路设施用制品.检验和交换用技术条件.第3部分:铸件
镁压制型材.第2部分:设计
铝和铝合金.危险货物的储存和运输用罐的可焊接轧制品
铝和铝合金.废料.第6部分:两种或多种锻造合金废料
铝和铝合金.锻造产品.压力设备生产装备特殊要求
铝和铝合金.术语和定义.第3部分:废料
铝和铝合金.废料.第3部分:导线和电缆废料
镁半成品.性能
铁路车辆用半成品.可锻铝合金棒材、型材及薄板.第1部分:选择
铝和铝合金.结构铁路设施用制品.检验和交换用技术条件.第4部分:锻制
铝和铝合金.废料.第12部分:单一合金车床切屑
锻造镁合金
镁挤出型材.交货技术条件
铝和铝合金.废料.第5部分:同批两种或多种锻造合金废料
铝和铝合金.生产包装和包装组件用产品的化学组分的特定要求
铁路车辆用半成品.铝型材.横档
铝和铝合金.废料.第11部分:铝铜散热器废料
铝和铝合金.施工作业用结构产品.检验和交付技术条件.德文版本EN 15088-2005
铝和铝合金.EN AW-6060和EN AW-6063合金中挤压的精密型材.第2部分:尺寸和
形状公差
铝和铝合金.锻件.第1部分:交货技术要求
铝和铝合金.挤压杆材/棒材、管材和型材.第4部分:方形棒材的尺寸和形状公差
铝和铝合金.重熔、母合金和铸件用合金铝锭的标识.第3部分:化学成分的书面规则;
德文版本 EN 1780-3:2002
铝和铝合金.轧制罐、塞子和盖子.规范
铝和铝合金.精锻制品的化学成分和形式.第2部分:基于标识系统的化学符号; 德文
版本 EN 573-2:1994
铝和铝合金.挤压杆材/棒材、管材和型材.第2部分:机械性能
铝和铝合金.拉拔坯料.第2部分:电器的特殊要求
铝和铝合金.重熔、母合金和铸件用合金铝锭的标识.第1部分:数字标识系统; 德文
版本 EN 1780-1:2002
铝和铝合金.一般用途的圆片和圆片坯料.规范; 德文版本 EN 941:1995
铝和铝合金.拉拔坯料.第4部分:焊接用特殊要求
铝和铝合金.带材、薄板和板材.第3部分:热轧制品的尺寸和外形公差
铝和铝合金.冷拉杆材/棒材和管材.第5部分:矩形棒材的尺寸和形状公差
铝和铝合金.挤压棒材、管材和型材.第8部分:带孔管材的尺寸和形状公差.技术勘误
DIN EN 755-8-2008
铝和铝合金.冷拉杆材/棒材和管材.第1部分:检验和交货技术条件
铝和铝合金.冷拉杆材/棒材和管材.第7部分:无缝管的尺寸和形状公差
铝和铝合金.锻制产品的化学成分和外形.第3部分:产品的化学成分和外形.英文版本
DIN EN 573-3-2009-08
铝和铝合金.箔.第2部分:机械性能
铝和铝合金.挤压棍棒,管和截面图.第7部分:无缝管尺寸公差和形状,英文版本DIN
EN 755-7:2009-07
铝和铝合金.再熔用非合金铝锭.规范
铝和铝合金.热交换器坯料.第2部分:机械性能
铝和铝合金.箔.第1部分:交货技术条件
铝和铝合金.铝制品的环境方面.标准中环境内容的一般导则
铝和铝合金.铸锻毛坯.第1部分:交货技术条件
铝和铝合金.铸锻毛坯.第2部分:尺寸和形状公差
铝和铝合金.锻造坯料.第3部分:尺寸和形状公差
铝和铝合金.铸件.化学成份和机械性能.德文版本EN 1706-2010
铝和铝合金.HF缝焊管.第4部分:正方形、长方形和成形管的尺寸和形状公差
铝和铝合金.锻造产品的化学成分和形状.第1部分:编号标识系统
铝和铝合金.厨房器具生产用圆片和圆片坯料.规范; 德文版本 EN 851:1995
镁和镁合金.镁和镁合金阳极、锭坯和铸件.命名制度
铝和铝合金.锻件.第2部分:机械性能和补充性能要求; 德文版本 EN 586-2:1994
铝和铝合金.锻件.与食品接触的物品制造用半成品的化学成分
铝和铝合金.锻造加工坯料.第2部分:机械性能
铝和铝合金.热交换器坯料.第3部分:公差、尺寸和形状
铝和铝合金.挤压杆材/棒材、管材和型材.第5部分:矩形棒材的尺寸和形状公差
铝和铝合金.HF缝焊管.第2部分:机械性能HF缝焊管.第2部分:机械性能
铝和铝合金.箔.第4部分:特殊性能要求
铝和铝合金.HF缝焊管.第3部分:圆管尺寸和形状公差
铝和铝合金.带材、薄板和板材.第2部分:机械性能.回火牌号比较
铝和铝合金.回炼用合金铝锭.规范.德文版本EN 1676-2010
铝和铝合金.挤压锻坯料.第1部分:验收和交货技术条件
铝和铝合金.试验方法.薄板和带材的端部花边试验
铝和铝合金.液态金属.规范; 德文版本 EN 577:1995
镁和镁合金.镁合金锭和铸件
铝和铝合金.重熔、母合金和铸件用合金铝锭的标识.第2部分:基于标识系统的化学
符号; 德文版本 EN 1780-2:2002
铝和铝合金.锻件.第3部分:尺寸和形状公差
铝和铝合金.HF缝焊管.第1部分:检验和交货技术条件
铝和铝合金.带材、薄板、板材.第3部分:冷轧制品尺寸形状公差
铝和铝合金.铸件.与食品接触的铸件的化学成分
碳质材料测试.未烧结和煅烧焦炭.火焰原子吸收光谱法测定痕量元素
铝和铝合金.散热片坯料.第1部分:检验和交货技术条件
铝和铝合金.挤压杆材/棒材、管材和型材.第8部分:带孔管材的尺寸和形状公差
铝和铝合金.由锻制品获得冷挤压金属块.规范
铝和铝合金.拉制坯料.第3部分:机械用特殊要求(不包括焊接)
铝和铝合金.挤压杆材/棒材、管材和型材.第3部分:圆棒材的尺寸和形状公差
铝和铝合金.冷拉杆材/棒材和管材.第6部分:六角形棒材的尺寸和形状公差
铝和铝合金.冷拉杆材/棒材和管材.第8部分:带孔管材的尺寸和形状公差
铝和铝合金.拉拔坯料.第1部分:检验和交货的一般要求和技术条件
铝和铝合金.锻制品的化学成分和形状.第5部分:标准锻制品汇编
铝和铝合金.冷拉杆材/棒材和管材.第4部分:方形钢的尺寸和形状公差
铝及铝合金.冷拉杆材/棒材和管材.第3部分:圆棒材的尺寸和形状公差
铝和铝合金.冷拉杆材/棒材和管材.第2部分:机械性能
铝和铝合金.挤压杆材/棒材、管材和型材.第9部分:轮廓、尺寸和形状公差
铝和铝合金.薄板材、带材和厚板材.第2部分:机械特性
铝和铝合金 挤压杆材/棒材、管材和型材 第2部分:机械性能 技术勘误DIN EN 755-
2-2008-06
铝和铝合金.通过熔炼生产的母合金.规范; 德文版本 EN 575:1995
铝和铝合金.挤压杆材/棒材、管材和型材.第9部分:型材尺寸和形状公差.技术勘误
DIN EN 755-9-2008-06
铝和铝合金.箔.第3部分:尺寸公差
铝和铝合金.挤压杆材/棒材、管材和型材.第6部分:六角形棒材的尺寸和形状公差
铝和铝合金.挤压杆材/棒材、管材和型材.第1部分:检验和交货技术条件
铝和铝合金.锻制品.回火状态标识符号
金属型铸造铝合金的使用UNS A13560和A03570.第VIII节,第1部分
规范施工用3003-H24铝合金.第VIII节,第1部分
热水加热锅炉制造用T6回火A356.0砂型铸造铝合金的使用.第IV节
非焊接施工用铝合金EN AW-6082-T6配件.第VIII节,第1部分
热水供应锅炉生产中F回火砂型铝合金EN AC-AlSi10Mg(a)的使用.第HC部分第IV
节.补充件8&9
规范施工用铝合金(铝-6.3镁).第VIII节,第1部分 补充件8&9
生产供热锅炉用半永久模造铝合金A356.0的使用.第HC部分.第IV节(已作废)(补充
件12)
1级核组件用6061-T6和6061-T651铝合金的使用.第III节,第1部分;已作废;补充件7
补充件7
供热锅炉施工用第IV节第HF部分中SB-209 5052-H32回火铝合金的使用.第IV和II-
B节;(补充件11)
铝和铝合金薄板和板材用规范.ASTM B209-96
铝和铝合金拉制无缝管用规范.ASTM B210-95
拉制无缝铝和铝合金管的规范
铝和铝合金棒材、杆材和线材用规范.ASTM B211-99
铝及铝合金挤压棒材
铝和铝合金压制棒材、杆材和型材用规范.ASTM B221-96
冷凝器和热交换器用铝和铝合金拉制无缝管规范.ASTM B234-95
铝及铝合金箔
铝和铝合金无缝管道和无缝挤压管材用规范.ASTM B241/B241M-99
镁及镁合金板、带材
铝合金6061-T6标准结构剖面用规范.ASTM B308/B308M-96
建筑用隔热铝合金型材
铝及铝合金拉(轧)制无缝管
不可膨胀战术掩体的标准规范
锌铜铝合金压模铸件规范
拉制铝和铝合金无缝管的标准规范(米制)
锻造及压模铸用锌铝合金铸锭规范
通用铝和铝合金挤制圆管的标准规范
热浸涂层锌5%铝混合稀土合金(UNS Z38510)铸锭规范
铝和铝合金挤压棒材、杆材、线材、型材和管材用标准规范(米制)
铝及铝合金棒材、条材和线材(米制)标准规范
连入泡沫和梁型可移动遮蔽物的铝合金制备的标准实施规程
锌铝合金铸造和压模铸件规范
检验铝铸件的标准数字参考图像
铝和铝合金薄板材和板材的标准规范
用破坏载荷法测定可热处理铝合金制品的抗应力腐蚀开裂特性的标准试验方法
镁合金压模铸件的标准规范
钢铁制造用铝标准规范
电镀用镁和镁合金制备的标准指南
非应力消除铝制品的平面应力断裂强度试验的标准导则
电工用挤制铝合金棒、条、杆及结构型材(汇流导体)标准规范
铝和铝合金压模锻件、手工锻件和轧制环形锻件的标准规范
热浸涂层用锭铁模型中GALFAN(锌-5%铝-含铈稀土)合金的标准规范
由各种浇铸工艺制成的铸锭和熔化型材用铝合金标准规范
铝合金厚板用热轧钢机溶解热处理的标准实施规范
锻造和铸造铝-镁合金产品抗拉性能的标准试验方法
铝及铝合金焊接圆管的标准规范
6061-T6型铝合金标准结构轮廓用标准规范
薄铝合金制品剪切试验的标准试验方法
冷凝器及热交换器用铝和铝合金拉制无缝管的标准规格
铝合金的剪切测试用标准试验方法
铝和铝合金薄板材和板材(米制)的标准规范
光谱化学分析用镁和镁合金取样的标准实施规程
铝合金砂模铸件标准规范
锻造和铸造铝-镁合金产品抗拉性能的标准试验方法[米制]
用原子发射光谱法分析铝和铝合金的标准试验方法
电工用耐热铝锆合金丝的标准规格
波纹铝管用铝合金薄板的标准规范
阴极保护用镁合金阳极的标准规范
铝生产用预焙阳极的取样计划和芯取样的标准指南
铪和铪合金带材、薄板材和厚板材的标准规范
镁合金熔模铸件的标准规范
制作锌压模合金用铝合金硬化剂的标准规范
砂型铸件、硬模铸件和压模铸件铸锭用镁合金的标准规范
单面可膨胀战术掩体的标准规范
电容器用铝箔标准规范
拉制无缝铝和铝合金管的标准规范
镁合金挤压制棒材、条材、型材、管材和线材的标准规格
铝和铝合金铆钉和冷镦合金线材和棒材标准规范
海上服务和类似环境用高镁铝合金薄板材和板材的标准规范
铝和铝合金成形和弧焊圆管的标准规范
铝、铝合金和铝包层钢电缆屏蔽材料标准规范
铝合金链环栅栏结构
冷凝器及热交换器用铝和铝合金拉制无缝管的标准规格(公制)
镁合金锻件的标准规范
用原子发射光谱法分析镁和镁合金的标准试验方法
锻造铝合金的热处理用标准实施规程
铝和镁合金产品的标准术语
用物理测量法对制铝工业用加工的阳极和阴极碳表观密度进行测量的标准试验方
法
镁合金薄板和中厚板的标准规范
铝合金轧制支撑板的标准规范
镁合金的热处理标准实施规范
铝合金挤压结构管和管件的标准规范
用X射线荧光法测定金属基体上钛处理重量的标准试验方法
铝及铝合金无缝管和挤压制无缝管的标准规格
与食品接触的和其它用途的挠性包装材料用退火铝及铝合金箔标准规范
双面可膨胀战术掩体的标准规范
镁合金永久铸模铸件用标准规范
T1、T2、T5、和T10型回火产品的梯度温度成形加工的冷挤压铝合金的标准规范
铝及铝合金挤压制条、棒、线、管和型材标准规范
真空镀膜用纯铝(未掺杂质)原材料标准规范
铝合金断裂韧性试验的标准实施规程
无缝铝合金管的电磁检验用的标准化设备
铝及镁制品的封装／包装的标准规范
铝及铝合金无缝管和挤压制无缝管的标准规范
电镀用铝合金的制备标准指南
电子薄膜器件用纯铝(非合金)原材料标准规范
铝及铝合金棒材、条材和线材标准规范
用恒电流测量铝及其合金的再钝化电位的标准试验方法
勘误表
铝和铝合金压模锻件、手工锻件和轧制环形锻件的标准规范(米制)
际标准号查询
英文名
General specification for sandwich panels of shelters
Test method for laboratory evaluation of magnesium sacrificial anode test specimens for underground
applications
Aluminium alloy reel of thread for textile tricot machines
Aluminium rare-earth alloy ingot for remelting
Aluminium sheet for dial plates and ornaments
Methods for chemical analysis of barium-silicon—The perchloric acid dehydration gravimetric method
for the determination of silicon content
Aluminum master alloy ingots
Rules for the inspection of magnesium ingots for export
Alumina
High purity aluminum
Aluminium alloys webster hardness standard test method
Aluminium alloy laminated foil for brazing type heater exchanger
Aluminium and aluminium alloys grain refiners Part 1: AI-Ti-B wire
Aluminium and aluminium alloy bus conductors
Welding wire matched to aluminum alloy extruded profiles for railroad vechicle structures
Aluminium and aluminium-alloy roll-casting strip
Aluminium foil for air conditioner Part 2 : Hydrophilic aluminium foil
Aluminium alloy tube for quarrying machine
Wrought aluminium alloy profiles for architecture with combined coatings of anodic oxide and
colorated organic coatings
Aluminium foil for cable
Aluminium and aluminum alloys—Coil coated sheet and strip
Aluminium strip for aluminium-plastic composite panel
Sodium fluoride
Aluminium and aluminium alloys sheets and strips with decorative pattern
Flux for wrought aluminium and aluminium alloy
Eliment additive for aluminium and aluminium alloy
The extruded rods of 4A11、4032 alloy for piston
Aluminium and aluminium alloy rolled sheet for washing machine
Magnesium alloy extruded tube
Aluminium alloy foil for brazing type heat exchanger
Wrought aluminium and aluminium alloys columniform ingots
Grain-refining aluminium ingots
Rules for the inspection of magnesium granules for export
Aluminium foil for air conditioner Part 1 : Untreated aluminium foil
Method for the determination of sodium metal for metal for import and export
Aluminum alloy rods for colliery pillar
Aluminium alloy composited sheet for brazing
Aluminium coiled sheet for foil (thickness
Magnesium and magnesium alloys extruded rectangular bars
Wrought aluminium and aluminium alloys rectangle ingots
Insulating aluminum alloy profile with thermal barrier strip for construction
High purity aluminum
Method for the determination of sodium metal for metal for import and export
Dimensional Tolerances for Aluminum Mill Products
Designation System for Aluminum Hardeners
Dimensional Tolerances for Aluminum Mill Products
Nomenclature System for Aluminum Metal Matrix Composite Materials
Electrical Rigid Aluminum Conduit (ERAC)
Alloy and Temper Designation Systems for Aluminum
Aluminium and aluminium alloys. Square and rectangular drawn tubes. Dimensions and form
tolerances.
Designation System for Unalloyed Aluminum
Chemical analysis of titanium and titanium alloys. Detemination of aluminium, vanadium and iron
contents in the TA6V alloy by flame atomic absorption spectrophotometry.
Iron and steel. Aluminium coated sheet. Cut lengths and coils.
Roof covering. Aluminium or aluminium-alloy shaped linear elements.
Aluminium and aluminium alloys. Forgings. Part 2 : mechanical properties and additional property
requirements.
Aluminium and aluminium alloys. Master alloys produced by melting. Specifications.
Semi-finished products made of magnesium alloys. Rectangular section exruded bars. Dimensions
and tolerances.
Aluminium and aluminium alloys. Liquid metal. Specifications.
Magnesium and magnesium alloys. Magnesium and magnesium alloy anodes, ingots and castings.
Designation system.
Aluminium and aluminium alloys - Scrap - Part 10 : scrap consisting of used aluminium beverage
cans.
Aluminium and aluminium alloys - Scrap - Part 14 : scrap from post-consumer aluminium packagings.
Aluminium and aluminium alloys. Wrought forging stock. Part 2 : mechanical properties.
Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with
foodstuff.
Aluminium and aluminium alloys - Scrap - Part 8 : scrap consisting of non-ferrous materials from
shredding processes destined to aluminium separation processes.
Aluminium and aluminium alloys. HF seam welded tubes. Part 2 : mechanical properties.
Aluminium and aluminium alloys. HF seam welded tubes. Part 4 : tolerances on dimensions and form
for square, rectangular and shaped tubes.
Aluminium and aluminium alloys. Sheet, strip and plate. Part 4 : tolerances on shape and dimensions
for cold-rolled products.
Aluminium and aluminium alloys - Scrap - Part 15 : decoated aluminium scrap from post-consumer
aluminium packagings.
Aluminium and aluminium alloys - Scrap - Part 12 : turnings consisting of one single alloy.
Aluminium and aluminium alloys. HF seam welded tubes. Part 1 : technical conditions for inspection
and delivery.
Aluminium and aluminium alloys - Scrap - Part 11 : scrap consisting of aluminium-copper radiators.
Aluminium and aluminium alloys. Chemical composition and form of wrought products. Part 2 :
chemical symbol based designation system.
Aluminium and aluminium alloys - Scrap - Part 9 : scrap from aluminium separation processes of non-
ferrous shredded materials.
Aluminium and aluminium alloys. Circle and circle stock for general applications. Specifications.
Magnesium and magnesium alloys. Magnesium alloy ingots and castings.
Magnesium and magnesium alloys. Unalloyed magnesium.
Aluminium and aluminium alloys. Reroll stock for general applications. Part 1 : specifications for hot-
rolled reroll stock.
Magnesium and magnesium alloys. Magnesium alloys for cast anodes.
Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for
the production of pressure equipment.
Aluminium and aluminium alloys - Sheet, strip and plate - Part 3 : tolerances on dimensions and form
for hot-rolled products.
Aluminium and aluminium alloys - Terms and definitions - Part 2 : chemical analysis.
Aluminium and aluminium alloys - Scrap - Part 7 : scrap consisting of castings.
Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions
for inspection and delivery - Part 2 : plates and sheets.
Aluminium and aluminium alloys - Scrap - Part 5 : scrap consisting of two or more wrought alloys of
the same series.
Aluminium and aluminium alloys. Circle and circle stock for the production of culinary utensils.
Specifications.
Aluminium and aluminium alloys - Specific requirements on the chemical composition of products
intended to be used for the manufacture of packaging and packaging components.
Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys
and castings - Part 2 : chemical symbol based designation system.
Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys
and castings - Part 1 : numerical designation system.
Aluminium and aluminium alloys - Scrap - Part 2 : unalloyed aluminium scrap.
Aluminium and aluminium alloys - Forgings - Part 3 : tolerances on dimensions and form.
Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications.
Aluminium and aluminium alloys. Forgings. Part 1 : technical conditions for inspection and delivery.
Aluminium and aluminium alloys. Cast forging stock. Part 2 : tolerances on dimensions and form.
Aluminium and aluminium alloys. Wrought forging stock. Part 1 : technical conditions for inspection
and delivery.
Metallic materials - Designation of test specimen axes in relation to product texture.
Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions
for inspection and delivery - Part 3 : castings.
Aluminium and aluminium alloys. Seamless pressure vessels aluminium alloys. Grades. Half-product :
billets.
Aluminium and aluminium alloys - Finstock - Part 3 : tolerances on dimensions and form.
Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for
inspection and delivery.
Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products -
Specification.
Aluminium and aluminium alloys - Finstock - Part 1 : technical conditions for inspection and delivery.
Aluminium and aluminium alloys - Foil - Part 1 : technical conditions for inspection and delivery.
Aluminium and aluminium alloys - Foil - Part 4 : special property requirements.
Hot-rolled weldable aluminium sheets for armouring - Part 2 : firing tests method.
Aluminium and aluminium alloys - Foil - Part 3 : tolerances on dimensions.
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5 :
codification of standardized wrought products.
Aluminium and aluminium alloys - Drawing stock - Part 2 : specific requirements for electrical
applications.
Aluminium and aluminium alloys - Requirements for anodised products for use in contact with
foodstuff.
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6 : hexagonal bars, tolerances
on dimensions and form.
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1 : technical conditions for
inspection and delivery.
Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063
- Part 1 : technical conditions for inspection and delivery.
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7 : seamless tubes, tolerances
on dimensions and form.
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 4 : square bars,
tolerances on dimensions and form.
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5 : rectangular bars,
tolerances on dimensions and form.
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4 : square bars, tolerances on
dimensions and form.
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5 : rectangular bars, tolerances
on dimensions and form.
Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063
- Part 2 : tolerances on dimensions and form.
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2 : mechanical properties.
Aluminium and aluminium alloys - Drawn wire - Part 1 : technical conditions for inspection and
delivery.
Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification.
Aluminium and aluminium alloys - Sheet, strip and plate - Part 2 : mechanical properties.
Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications -
Specification.
Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and
transportation of dangerous goods.
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3 : round bars, tolerances on
dimensions and form.
Roofing materials. Corrugated or ribbed aluminium alloy plates.
Strips and sheets made from continuous prelacquered aluminium. Requirements.
Aluminium and aluminium alloys - Sheet, strip and plate - Part 1 : technical conditions for inspection
and delivery.
Aluminium and aluminium alloys. Wrought products. Temper designations.
Aluminium and aluminium alloys. Test methods. Earing test for sheet and strip.
Aluminium and aluminium alloys - Drawn wire - Part 2 : mechanical properties.
Aluminium and aluminium alloys - Scrap - Part 1 : general requirements, sampling and tests.
Roof covering. Aluminium alloy ribbed sheets. Static and dynamic bend tests.
Aluminium and aluminium alloys. Round extruded tubes in coils for general purpose. Dimensions and
form tolerances.
Aluminium and aluminium alloys - Sheet, strip and plate - Part 1 : technical conditions for inspection
and delivery.
Aluminium and aluminium alloys - Scrap - Part 4 : scrap consisting of one single wrought alloy.
Aluminium and aluminium alloys - Scrap - Part 13 : mixed turnings consisting of two or more alloys.
Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys
and castings - Part 3 : writing rules for chemical composition.
Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications.
Aluminium and aluminium alloys - Drawn wire - Part 3 : tolerances on dimensions.
Semi-finished products made of magnesium alloys. Round section extruded bars. Dimensions and
tolerances.
Aluminium and aluminium alloys. HF seam welded tubes. Part 3 : tolerances on dimensions and form
for circular tubes.
Founding - Measurement of the mean intercept using image analysis - Aluminium castings with a 5 to
11 content % of silicium.
Aluminium and aluminium alloys - Terms and definitions - Part 4 : residues of the aluminium industry.
Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications.
Aluminium and aluminium alloys - Foil - Part 2 : mechanical properties.
Copper and copper alloys - Determination of residual stresses in the border area of slit strip.
Strip and sheets made from continuous prelacquered aluminium. Methods of tests.
Semi-finished products made of magnesium alloys. Round extruded tubes. Dimensional tolerances.
Semi-finished products made of magnesium and magnesium alloys. Temper designation.
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3 : round bars, tolerances
on dimensions and form.
Aluminium and aluminium alloys. Reroll stock for general applications. Part 2 : specifications for cold-
rolled reroll stock.
Aluminium and aluminium alloys - Terms and definitions - Part 3 : scrap.
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 6 : hexagonal bars,
tolerances on dimensions and form.
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9 : profiles, tolerances on
dimensions and form.
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1 : technical conditions for
inspection and delivery.
Aluminium and aluminium alloys - Scrap - Part 16 : scrap consisting of skimmings, drosses, spills and
metallics.
Hot-rolled weldable aluminium sheets for armouring - Part 1 : technical delivery conditions.
Aluminium and aluminium alloys. Terms and definitions. Part 1 : general terms.
Aluminium and aluminium alloys - Scrap - Part 3 : wire and cable scrap.
Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products
used for the fabrication of articles for use in contact with foodstuff.
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8 : porthole tubes, tolerances on
dimensions and form.
Aluminium and aluminium alloys - Finstock - Part 2 : mechanical properties.
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7 : seamless tubes,
tolerances on dimensions and form.
Aluminium and aluminium alloys - Tread plate - Specifications.
Aluminium and aluminium alloys. Cast forging stock. Part 1 : technical conditions for inspection and
delivery.
Aluminium and aluminium drawn rod/bar and 2:mechanical properties.
Aluminium and aluminium alloys - Scrap - Part 6 : scrap consisting of two or more wrought alloys.
Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions
for inspection and delivery - Part 1 : extruded products.
Aluminium and aluminium alloys - Wrought forging stock - Part 3 : tolerances on dimensions and form.
Magnesium alloy castings
Magnesium alloy die castings
Magnesium alloy ingots for castings
Magnesium alloy ingots for die castings
Virgin aluminium ingots for electrical purposes
Aluminium and aluminium alloy foils
Methods for atomic absorption spectrometric analysis of aluminium and aluminium alloys
Aluminium, magnesium and their alloys -- Temper designation
ERRATUM
Aluminium and aluminium alloy sheets, strips and plates
Painted and baked aluminium and aluminium alloy sheets and strips
Aluminium and aluminium alloy rods, bars and wires
Aluminium and aluminium alloys extruded tubes and cold-drawn tubes
Magnesium alloy sheets, plates, strips and coiled sheets
Methods for determination of beryllium in aluminium and aluminium alloys
Aluminium and aluminium alloy extruded shape
Magnesium alloy bars
Magnesium alloy extruded shapes
Method for determination of gallium in aluminium and aluminium alloys
Secondary aluminium ingots (Amendment 1)
Aluminium and aluminium alloy welded pipes and tubes (Amendment 1)
Magnesium alloy seamless pipes and tubes
Aluminium and aluminium alloy foils (Amendment 1)
Virgin aluminium ingots
Secondary aluminium ingots
Refined aluminium ingots
High purity aluminium foils (Amendment 1)
Calcium silicon
Aluminium and aluminium alloy forgings
Classification standard of aluminium and aluminium alloy scraps
High purity aluminium foils
Aluminium sheet wares
ERRATUM
ERRATUM
Aluminium alloy die castings
Titanium and titanium alloy castings
Aluminium alloy ingots for die castings
ERRATUM
Methods for determining average grain size of magnesium alloy sheets
Methods for determination of tin in magnesium and magnesium alloys
ERRATUM
Virgin aluminium ingots (Amendment 1)
Methods for determination of lead in magnesium and magnesium alloys
ERRATUM
Virgin Aluminium Ingots for Electrical Purposes (Amendment 1)
ERRATUM
ERRATUM
Aluminium sheet wares (Amendment 1)
ERRATUM
ERRATUM
Refined Aluminium Ingots (Amendment 1)
Aluminium alloy sand castings; Reference test bar
Wrought aluminium and aluminium alloy cold-drawn wire; part 1: technical conditions for inspection
and delivery
Aluminium alloy ingots for castings
Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from
individual units - Part 1: Cathode blocks
Aluminium alloy castings; visual method for assessing the porosity
Aluminium alloy castings; radiography testing
Corrosion of aluminium alloys - Determination of resistance to stress corrosion cracking
Wrought aluminium and aluminium alloy sheets, strips and plates; part 2: mechanical properties
Magnesium and magnesium alloys - Returns - Requirements, classification and acceptance
Magnesium and magnesium alloys - Magnesium alloy ingots and castings
Carbonaceous materials used in the production of aluminium - Calcined coke and calcined carbon
products - Determination of total sulfur by the Eschka method
Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of
C/H ratio in the quinoline-insoluble fraction
Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of
volatile matter content
Carbonaceous materials used for the production of aluminium - Cathode blocks an prebacked anodes
- Determination of the density in xylene by a pyknometric method
Magnesium and magnesium alloys - Unalloyed magnesium - Chemical composition
Carbonaceous materials for use in the production of aluminium - Green and calcined coke -
Determination of trace elements by flame atomic absorption spectroscopy
Carbonaceous materials used in the production of aluminium - Green coke and calcined coke for
electrodes - Analysis using an X-ray fluorescence method
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles - Part 5: Extruded
round, square and hexagonal bars; Tolerances on shape and dimensions
Wrought aluminium and aluminium alloy sheets, strips and plates; Part 1 : Technical conditions for
inspection and delivery
Wrought aluminium and aluminium alloys - Drawn round bars - Tolerances on shape and dimensions
(All minus tolerances on diameter)
Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from
individual units - Part 2: Prebaked anodes
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles - Part 3: Extruded
rectangular bars; Tolerances on shape and dimensions
Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes; part 4: drawn rectangular
bars; tolerances on form and dimensions
Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes; part 1: technical conditions
for inspection and delivery
Magnesium alloys; Round bars and tubes; Dimensional tolerances
Wrought aluminium and aluminium alloy sheets, strips and plates; part 4: sheets and plates;
tolerances on shape and dimensions
Aluminium and aluminium alloys - Chemical composition
Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications
Magnesium and magnesium alloys - Magnesium alloys for cast anodes
Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties
Magnesium alloy sand castings; Reference test bar
Aluminium alloy chill castings; Reference test bar
Carbonaceous materials for the production of aluminium - Calcined coke for electrodes -
Determination of the electrical resistivity of granules
Wrought aluminium and aluminium alloy; cold-drawn rods/bars and tubes; part 2: mechanical
properties
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles; part 2: mechanical
properties
Wrought aluminium and aluminium alloys; Drawn round bars; Tolerances on shape and dimensions
(Symmetric plus and minus tolerances on diameter)
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles; Part 1 : Technical
conditions for inspection and delivery
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles; part 4: extruded
profiles; tolerances on shape and dimensions
Aluminium and aluminium alloys; Foil and thin strip; Dimensional tolerances
Unalloyed aluminium ingots for remelting - Classification and composition
Aluminium oxide primarily used for the production of aluminium - Determination of loss of mass at 300
°C and 1000 °C
Wrought aluminium and aluminium alloy sheets, strips and plates; Part 3 : Strips; Tolerances on
shape and dimensions (Previously referenced DIS 8219)
Magnesium and magnesium alloys - Magnesium alloy ingots and castings; Amendment 1: Additional
alloys
Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications; Technical
Corrigendum 1
Aluminium and aluminium alloys - Wrought products - Temper designations
Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes; part 5: drawn square and
hexagonal bars; tolerances on form and dimensions
Carbonaceous materials for the production of aluminium - Green coke and calcined coke for
electrodes - Determination of bulk density (tapped)
Carbonaceous materials for use in the production of aluminium - Calcined coke - Determination of
grain stability using a laboratory vibration mill
Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from
individual units - Part 3: Sidewall blocks
Magnesium and magnesium alloys - Wrought magnesium alloys
Recommendation for heat-treated aluminium alloy busbar material of the aluminium-magnesium-
silicon type; Corrigendum 1
Aluminium and aluminium alloys - Wrought forging stock - Part 1: Technical conditions for inspection
and delivery; German version EN 603-1:1996
Aluminium and aluminium alloys - Reroll stock for general applications - Part 1: Specifications for hot
rolled reroll stock; German version EN 12482-1:1998
Aluminium and aluminium alloys - Scrap - Part 10: Scrap consisting of used aluminium beverage
cans; German version EN 13920-10:2003
Aluminium and aluminium alloys - Scrap - Part 16: Scrap consisting of skimmings, drosses, spills and
metallics; German version EN 13920-16:2003
Aluminium and aluminium alloys - Products for structural railway applications; Technical conditions for
inspection and delivery - Part 1: Extruded products; German version EN 13981-1:2003
Aluminium and aluminium alloys - Test methods - Earing test for sheet and strip; German version EN
1669:1996
Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys
and castings - Part 2: Chemical symbol based designation system; German version EN 1780-2:2002
Aluminium and aluminium alloys - Liquid metal - Specifications; German version EN 577:1995
Aluminium and aluminium alloys - Scrap - Part 4: Scrap consisting of one single wrought alloy;
German version EN 13920-4:2003
Aluminium and aluminium alloys - Scrap - Part 2: Unalloyed aluminium scrap; German version EN
13920-2:2003
Aluminium and aluminium alloys - Scrap - Part 13: Mixed turnings consisting of two or more alloys;
German version EN 13920-13:2003
Magnesium and magnesium alloys - Magnesium alloy ingots and castings; German version EN
1753:1997
Aluminium and aluminium alloys - Reroll stock for general applications - Part 2: Specifications for cold
rolled reroll stock; German version EN 12482-2:1998
Zinc and zinc alloys - Method of sampling - Specifications; German version EN 12060:1997
Aluminium and aluminium alloys; sheet, strip and plate; part 4: tolerances on shape and dimensions
for cold-rolled products; German version EN 485-4:1993
Aluminium and aluminium alloys - Anodizing - Part 11: Measurement of specular reflectance and
specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60° or 85°; German version EN
Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms; Trilingual version EN
12258-1:1998
Aluminium and aluminium alloys - Forgings - Part 3: Tolerances on dimensions and form; German
version EN 586-3:2001
Aluminium and aluminium alloys - Anodizing - Part 12: Measurement of reflectance characteristics of
aluminium surfaces using integrating-sphere instruments; German version EN 12373-12:2000
Aluminium and aluminium alloys - Terms and definitions - Part 4: Residues of the aluminium industry;
Trilingual version EN 12258-4:2004
Aluminium and aluminium alloys - Anodizing - Part 19: Rating system for the evaluation of pitting
corrosion; Grid method; German version EN 12373-19:2001
Aluminium and aluminium alloys - Scrap - Part 8: Scrap consisting of non-ferrous materials from
shredding processes destined to aluminium separation processes; German version EN 13920-8:2003
Aluminium and aluminium alloys - HF seam welded tubes - Part 1: Technical conditions for inspection
and delivery; German version EN 1592-1:1997
Aluminium and aluminium alloys - Scrap - Part 9: Scrap from aluminium separation processes of non-
ferrous shredded materials; German version EN 13920-9:2003
Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications;
English version of DIN EN 1396:2007-04
Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products -
Specification; English version of DIN EN 570:2007-04
Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with
foodstuff; German version EN 601:2004
Aluminium and aluminium alloys - Finstock - Part 1: Technical conditions for inspection and delivery;
English version of DIN EN 683-1:2007-03
Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions; English version of
DIN EN 1301-3:2008-12
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3: Round bars, tolerances
on dimensions and form; English version of DIN EN 755-3:2008-06
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances
on dimensions and form; English version of DIN EN 754-6:2008-06
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5:
Codification of standardized wrought products; English version of DIN EN 573-5:2007-11
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on
dimensions and form; English version of DIN EN 754-4:2008-06
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes,
tolerances on dimensions and form; English version of DIN EN 755-8:2008-06
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on
dimensions and form; English version of DIN EN 754-3:2008-06
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties;
English version of DIN EN 754-2:2008-06
Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and
delivery; English version of DIN EN 1301-1:2008-12
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on
dimensions and form; English version of DIN EN 754-8:2008-06
Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties; English
version of DIN EN 485-2:2009-01
Aluminium and aluminium alloys - Drawing stock - Part 1: General requirements and technical
conditions for inspection and delivery; German version EN 1715-1:2008
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on
dimensions and form; English version of DIN EN 755-9:2008-06
Aluminium and aluminium alloys - Scrap - Part 15: Decoated aluminium scrap from post-consumer
aluminium packagings; German version EN 13920-15:2003
Aluminium and aluminium alloys - Sheet, strip and plate for electrotechnical applications; English
version of DIN EN 14121:2009-09
Aluminium and aluminium alloys - Master alloys produced by melting - Specifications; German version
EN 575:1995
Aluminium and aluminium alloys - Scrap - Part 7: Scrap consisting of castings; German version EN
13920-7:2003
Aluminium and aluminium alloys - Drawing stock - Part 3: Specific requirements for mechanical uses
(excluding welding); German version EN 1715-3:2008
Aluminium and aluminium alloys - Scrap - Part 1: General requirements, sampling and tests; German
version EN 13920-1:2003
Aluminium and aluminium alloys - Tread plate - Specifications; English version of DIN EN 1386:2008-
05
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 6: Hexagonal bars,
tolerances on dimensions and form; English version of DIN EN 755-6:2008-06
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions
for inspection and delivery; English version of DIN EN 755-1:2008-06
Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions; English version of DIN EN
546-3:2007-03
Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties; English version of DIN
EN 1301-2:2008-12
Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063
- Part 1: Technical conditions for inspection and delivery; English version of DIN EN 12020-1:2008-06
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 4: Square bars,
tolerances on dimensions and form; English version of DIN EN 755-4:2008-06
Aluminium and aluminium alloys - Forgings - Part 1: Technical conditions for inspection and delivery;
German version EN 586-1:1997
Aluminium and aluminium alloys - Anodizing - Part 10: Measurement of mean specific abrasion
resistance of anodic oxidation coatings using an abrasive jet test apparatus; German version EN
Aluminium and aluminium alloys; wrought products; temper designations; German version EN
515:1993
Aluminium and aluminium alloys - Scrap - Part 14: Scrap from post-consumer aluminium packagings;
German version EN 13920-14:2003
Aluminium and aluminium alloys - Drawing stock - Part 2: Specific requirements for electrical
applications; German version EN 1715-2:2008
Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification;
German version EN 13957:2008
Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys
and castings - Part 3: Writing rules for chemical composition; German version EN 1780-3:2002
Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications; English
version of DIN EN 541:2007-03
Aluminium and aluminium alloys - Products for structural railway applications, Technical conditions for
inspection and delivery - Part 2: Plates and sheets; German version EN 13981-2:2004
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties;
English version of DIN EN 755-2:2008-06
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for
inspection and delivery; English version of DIN EN 754-1:2008-06
Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and
transportation of dangerous goods; German version EN 14286:2008
Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys
and castings - Part 1: Numerical designation system; German version EN 1780-1:2002
Aluminium and aluminium alloys - Products for structural railway applications, Technical conditions for
inspection and delivery - Part 3: Castings; German version EN 13981-3:2006
Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding
applications; German version EN 1715-4:2008
Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form
for hot-rolled products; German version EN 485-3:2003
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances
on dimensions and form; English version of DIN EN 754-5:2008-06
Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications -
Specification; German version EN 13958:2008
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances
on dimensions and form; English version of DIN EN 754-7:2008-06
Aluminium and aluminium alloys - Foil - Part 2: Mechanical properties; English version of DIN EN 546-
2:2007-03
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3:
Chemical composition and form of products; English version of DIN EN 573-3:2009-08
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 2:
Chemical symbol based on designation system; German version EN 573-2:1994
Aluminium and aluminium alloys - Circle and circle stock for general applications - Specifications;
German version EN 941:1995
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes,
tolerances on dimensions and form; English version of DIN EN 755-7:2009-07
Aluminium and aluminium alloys - Scrap - Part 6: Scrap consisting of two or more wrought alloys;
German version EN 13920-6:2003
Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications; German
version EN 576:2003
Aluminium and aluminium alloys - Cast forging stock - Part 1: Technical conditions for inspection and
delivery; German version EN 604-1:1997
Aluminium and aluminium alloys - Terms and definitions - Part 3: Scrap; Trilingual version EN 12258-
3:2003
Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties; English version of DIN EN
683-2:2007-03
Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for
the production of pressure equipment; German version EN 12392:2000
Aluminium and aluminium alloys - Environmental aspects of aluminium products - General guidelines
for their inclusion in standards; German version EN 15530:2008
Aluminium and aluminium alloys - Foil - Part 1: Technical conditions for inspection and delivery;
English version of DIN EN 546-1:2007-03
Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties;
German version EN 1706:2010
Aluminium and aluminium alloys - Cast forging stock - Part 2: Tolerances on dimensions and form;
German version EN 604-2:1997
Aluminium and aluminium alloys - Scrap - Part 12: Turnings consisting of one single alloy; German
version EN 13920-12:2003
Aluminium and aluminium alloys - Wrought forging stock - Part 3: Tolerances on dimensions and
form; German version EN 603-3:2000
Aluminium and aluminium alloys - Scrap - Part 3: Wire and cable scrap; German version EN 13920-
3:2003
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1:
Numerical designation system; German version EN 573-1:2004
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5: Rectangular bars,
tolerances on dimensions and form; English version of DIN EN 755-5:2008-06
Magnesium and magnesium alloys - Magnesium and magnesium alloy anodes, ingots and castings -
Designation system; German version EN 1754:1997
Aluminium and aluminium alloys - HF seam welded tubes - Part 4: Tolerances on dimensions and
form for square, rectangular and shaped tubes; German version EN 1592-4:1997
Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions
for inspection and delivery - Part 4: Forgings; English version of DIN EN 13981-4:2007-02
Aluminium and aluminium alloys - Forgings - Part 2: Mechanical properties and additional property
requirements; German version EN 586-2:1994
Aluminium and aluminium alloys - Wrought forging stock - Part 2: Mechanical properties; German
version EN 603-2:1996
Aluminium and aluminium alloys - Scrap - Part 5: Scrap consisting of two or more wrought alloys of
the same series; German version EN 13920-5:2003
Aluminium and aluminium alloys - Scrap - Part 11: Scrap from aluminium-copper radiators; German
version EN 13920-11:2003
Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products
used for the fabrication of articles for use in contact with foodstuff; German version EN 602:2004
Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils -
Specifications; German version EN 851:1995
Aluminium and aluminium alloys - HF seam welded tubes - Part 2: Mechanical properties; German
version EN 1592-2:1997
Aluminium and aluminium alloys - HF seam welded tubes - Part 3: Tolerances on dimensions and
form for circular tubes; German version EN 1592-3:1997
Aluminium and aluminium alloys - Finstock - Part 3: Tolerances on dimensions and form; English
version of DIN EN 683-3:2007-03
Aluminium and aluminium alloys - Specific requirements on the chemical composition of products
intended to be used for the manufacture of packaging and packaging components; German version
Aluminium and aluminium alloys - Foil - Part 4: Special property requirements; English version of DIN
EN 546-4:2007-03
Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063
- Part 2: Tolerances on dimensions and form; English version of DIN EN 12020-2:2008-06
Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications; German version EN
1676:2010
Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for
inspection and delivery; English version of DIN EN 15088:2006-03
Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of
superconductors at microwave frequencies
Aluminium and aluminium alloys - Foil - Part 4: Special property requirements
Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions
Specification for aluminium capping foil and strip for dairy product containers - Aluminium capping foil
for glass containers
Aluminium and aluminium alloys. Alloyed ingots for remelting. Specifications
Aluminium and aluminium alloys - Foil - Part 1: Technical conditions for inspection and delivery
Aluminium and aluminium alloys - Forgings - Tolerances on dimensions and form
Rod bodies, flight control in aluminium alloy, for adjustable end fittings - Dimensions and loads
Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode
coke - Determination of particle size distribution of fine coke
Aluminium alloy AL-P7009-T74511 - Extruded bars and sections a or D 125 mm with peripheral
coarse grain control
Aluminium andaluminium alloys —Extruded rod/bar, tubeand profiles —Part 1: Technical conditions
forinspection and delivery
Protection of magnesium-rich alloys against corrosion - Specification
Aluminium andaluminium alloys —Extruded rod/bar, tubeand profiles —Part 3: Round bars,
tolerances ondimensions and form
Aluminium and aluminium alloys - Drawing stock - Part 2:Specific requirements for electrical
applications
Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products -
Specification
Aluminium and aluminium alloys - Finstock - Part 3: Tolerances on dimensions and form
Aluminium andaluminium alloys —Extruded rod/bar, tubeand profiles —Part 4: Square bars,
tolerances ondimensions and form
Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-
6063: Technical conditions for inspection and delivery
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Technical conditions for inspection
and delivery
Aluminium andaluminium alloys —Extruded rod/bar, tubeand profiles —Part 5: Rectangular bars,
tolerances ondimensions and form
Aluminium andaluminium alloys —Extruded rod/bar, tubeand profiles —Part 7: Seamless tubes,
tolerances ondimensions and form
Aluminium andaluminium alloys —Cold drawn rod/barand tube —Part 2: Mechanical properties
Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications -
Specification
Aluminium andaluminium alloys —Extruded rod/bar, tubeand profiles —Part 8: Porthole tubes,
tolerances ondimensions and form
Aluminium and aluminium alloys - Sheet, strip and plate - Part 2:Mechanical properties
Aluminium and aluminium alloys - Drawing stock - Part 1:General requirements and technical
conditions for inspection and delivery
Aluminium and aluminium alloys - Test methods - Earing test for sheet and strip
Aluminium and aluminium alloys - Liquid metal - Specifications
Aluminium and aluminium alloys - Drawing stock - Part 3:Specific requirements for mechanical uses
(excluding welding)
Aluminium alloy AL-P7009-T74511 - Extruded bars and sections a or D 125 mm
Aluminium and aluminium alloys - Terms and definitions - Chemical analysis
Aluminium alloy AL-P7075-T651 - Plate 6 mm a 80 mm
Aluminium and aluminium alloys - Sheet, strip and plate - Technical conditions for inspection and
delivery
Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications
Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties
Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification
Aluminium and aluminium alloys - Sheet, strip and plate for electrotechnical applications
Wrought aluminium and aluminium alloys for general engineering purposes (supplementary series) -
5454 Drawn tube
Magnesium and magnesium alloys - Unalloyed magnesium
Aluminium and aluminium alloys - Circle and circle stock for general applications - Specifications
Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy (solution treated and
artificially aged: not tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr
Procedure for inspection, testing and acceptance of wrought aluminium and aluminium alloys
Aluminium and aluminium alloys - Scrap - Scrap consisting of two or more wrought alloys of the same
series
Aluminium and aluminium alloys
Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions
for inspection and delivery - Forgings
Aluminium oxide primarily used for the production of aluminium - Determination of loss of mass at 300
?C and 1 000 ?C
Aluminium and aluminium alloys — Rolled products for cans, closures and lids — Specifications
Anodizing of aluminium and its alloys. Determination of thickness of anodic oxidation coatings. Non-
destructive measurement by split-beam microscope
Magnesium and magnesium alloys. Wrought magnesium alloys
Aluminium and aluminium alloys - Drawn wire - Part 1:Technical conditions for inspection and delivery
Specification for sulfuric acid anodizing of aluminium and wrought aluminium alloys
Aluminium alloy AL-P7009-T74 - Hand forgings 20 mm a 150 mm
Specification for wire for solid cold-forged rivets of aluminium-copper-magnesium-silicon-manganese
alloy (for use in the solution treated and naturally aged condition) (not exceeding 10 mm diameter)
Test methods for aluminium and aluminium alloy products - Determination of electrical conductivity of
wrought aluminium alloys
Chromic-sulphuric acid pickle of aluminium and aluminium alloys
Specification for aluminium alloy forging stock and forgings - Technical specification - General
requirements
Aluminium and aluminium alloys - Scrap - Scrap consisting of aluminium-copper radiators
Specification for plate of aluminium-magnesium-silicon-manganese alloy (solution treated, controlled
stretched and precipitation treated) (not exceeding 25 mm thickness) (suitable for welding) (Mg 0.8, Si
Aluminium and aluminium alloys - Tread plate - Specifications
Aluminium and aluminium alloys - Terms and definitions - Residues of the aluminium industry
Anodizing of aluminium and its alloys. Assessment of resistance of anodic oxidation coatings to
cracking by deformation
Specification for wrought aluminium for electrical purposes - Strip with drawn or rolled edges
Aluminium alloy AL-P7075-T73511 - Extruded bars and sections a or D 100 mm
Specification for sheet and strip of aluminium-magnesium-silicon-manganese alloy (solution treated
and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
Aluminium alloy AL-P2014A T6 or T62 - Sheet and strip - 0,4 mm a 6 mm
Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions
for inspection and delivery - Plates and sheets
Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions
for inspection and delivery - Castings
Aluminium andaluminium alloys —Extruded precisionprofiles in alloysEN AW-6060 andEN AW-6063
—Part 2: Tolerances on dimensions andform
Aluminium andaluminium alloys —Extruded rod/bar, tubeand profiles —Part 9: Profiles, tolerances
ondimensions and form
Aluminium and aluminium alloys - Environmental aspects of aluminium products - General guidelines
for their inclusion in standards
Aluminium and aluminium alloys - Drawn wire - Tolerances on dimensions
Aluminium and aluminium alloys - Cast forging stock - Tolerances on dimensions and form
Aluminium and aluminium alloys - Scrap - Scrap consisting of used aluminium beverage cans
Specification for aluminium-coated sheet and strip of aluminium-copper-magnesium-manganese alloy
(supplied for solution treatment by the user) (Cu 4.4, Mg 1.5, Mn 0.6)
Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties
Aluminium and aluminium alloys - Scrap - Scrap consisting of castings
Magnesium and magnesium alloys - Magnesium alloy ingots and castings
Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions
for inspection and delivery - Extruded products
Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-
manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
Aluminium andaluminium alloys— Weldable rolledproducts for tanksfor the storage andtransportation
ofdangerous goods
Specification for tube of 99% aluminium (cold drawn: seamless: tested hydraulically) (not exceeding
12 mm wall thickness)
Aluminium alloy AL-P6082-T6 - Extruded bars and sections a or D 200 mm
Test methods for aluminium and aluminium alloy products - Determination of cladding thickness and
copper diffusion of clad semi-finished products
Magnesium and magnesium alloys - Magnesium alloys for cast anodes
Aluminium and aluminium alloys - Part 2: Foil - Mechanical properties
Aluminium and aluminium alloys - Chemical composition
Aluminium andaluminium alloys —Cold drawn rod/barand tube —Part 3: Round bars, tolerances
ondimensions and form
Aluminium andaluminium alloys —Extruded rod/bar, tubeand profiles —Part 2: Mechanical properties
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Porthole tubes, tolerances on
dimensions and form
Aluminium and aluminium alloys. Specific requirements on the chemical composition of products
intended to be used for the manufacture of packaging and packaging components
Aluminium and aluminium alloys - Reroll stock for general applications - Specifications for hot rolled
reroll stock
Aluminium and aluminium alloys -Part 2:Drawn wire - Mechanical properties
Specification for aluminium-coated sheet and strip of aluminium-copper-magnesium-manganese alloy
(solution treated and aged at room temperature) (Cu 4.4, Mg 1.5, Mn 0.6)
Aluminium and aluminium alloys - Scrap - Scrap from aluminium separation processes of non-ferrous
shredded materials
Aluminium alloy AL-P7009-T7452 - Hand forgings 40 mm a 150 mm
Aluminium and aluminium alloys - Scrap - Scrap from post-consumer aluminium packagings
Aluminium and aluminium alloys - Terms and definitions - Scrap
Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for
inspection and delivery
Anodizing of aluminium and its alloys. Rating system for the evaluation of pitting corrosion. Chart
method
Aluminium andaluminium alloys —Extruded rod/bar, tubeand profiles —Part 6: Hexagonal bars,
tolerances ondimensions and form
Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-
silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
Specification for wrought aluminium and aluminium alloys for electrical purposes. Bars, extruded
round tube and sections
Methods of sampling and test for carbonaceous materials used in aluminium manufacture -
Electrodes - Determination of density of cathode blocks and prebaked anodes
Aluminium and aluminium alloys - Cast forging stock - Technical conditions for inspection and delivery
Aluminium and aluminium alloys - Scrap - Scrap consisting of skimmings, drosses, spills and metallics
Aluminium and aluminium alloys - Scrap - General requirements, sampling and tests
Aluminium and aluminium alloys - Reroll stock for general applications - Specifications for cold rolled
reroll stock
Aluminium andaluminium alloys —Cold drawn rod/barand tube —Part 4: Square bars, tolerances
ondimensions and form
Aluminium andaluminium alloys —Cold drawn rod/barand tube —Part 7: Seamless tubes,
toleranceson dimensions and form
Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications
(shipbuilding, marine and offshore)
Specification for tube of aluminium-magnesium-silicon-manganese alloy (solution treated and
precipitation treated) (not exceeding 10 mm wall thickness) (suitable for welding) (Mg 0.8, Si 1, Mn
Anodizing of aluminium and its alloys. Check for continuity of thin anodic oxidation coatings. Copper
sulfate test
Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode
coke - Determination of water content of calcined coke
Aluminium alloy AL-P6082-T6 - Extruded bars and sections a or D 200 mm with peripheral coarse
grain control
Specification for anodic coating of titanium and titanium alloys by the sulphuric acid process
Aluminium and aluminium alloys - Sheet, strip and plate - Tolerances on shape and dimensions for
cold-rolled products
Aluminium and aluminium alloys - Wrought forging stock - Mechanical properties
Aluminium and aluminium alloys - Scrap - Decoated aluminium scrap from post-consumer aluminium
packagings
Aluminium and aluminium alloys - Scrap - Scrap consisting of one single wrought alloy
Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products
used for the fabrication of articles for use in contact with foodstuff
Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts
Aluminium and aluminium alloys. Wrought products. Special requirements for products intended for
the production of pressure equipment
Aluminium and aluminium alloys. Finstock. Part 1: Technical conditions for inspection and delivery
Aluminium and aluminium alloys - Wrought products - Temper designations
Aluminium and aluminium alloys - Drawing stock - Part 4:Specific requirements for welding
applications
Aluminium alloy AL-P2014A-T4511 - Extruded bars and sections a or D 200 mm
Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications
Specification for sheet and strip of 99% aluminium (temper designation H14 or H24)
Aluminium andaluminium alloys —Cold drawn rod/barand tube —Part 6: Hexagonal bars,
toleranceson dimensions and form
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Codification
of standardized wrought products
Specification for chromic acid anodizing of aluminium and wrought aluminium alloys
Aluminium alloy AL-P2024-T3511 - Extruded bars and sections 1,2 mm a or D 150 mm with
peripheral coarse grain control
Rivets, solid, universal head, in aluminium alloy 2117, inch based series
Aluminium and aluminium alloys - Master alloys produced by melting - Specifications
Aluminium alloy AL-P7075-T7351 - Drawn bars 6 mm a or D 75 mm
Aluminium and aluminium alloys - Wrought forging stock - Technical conditions for inspection and
delivery
Method of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode
pitch - Determination of mesophase content
Aluminium and aluminium alloys - Forgings - Technical conditions for inspection and delivery
Specification for forging stock and forgings of aluminium-magnesium-silicon-manganese alloy
(solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy (solution treated and
artificially aged: tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr
Specification for tube of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and
aged at room temperature) (not exceeding 10 mm wall thickness) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
Specification for close toleranced sheet and strip of aluminium-copper-magnesium-silicon-manganese
alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
Specification for bars and extruded sections of magnesium-6% aluminium-zinc alloy (not exceeding
150 mm diameter or minor sectional dimension) (Al 6.0, Zn 1.0)
Specification for wire for solid, cold-forged rivets of 99.5% aluminium (not exceeding 10 mm diameter)
Specification for sheet and strip of aluminium-manganese alloy (temper designation H16 or H26)
Aluminium and aluminium alloys - Designation of unalloyed and alloyed aluminium ingots for
remelting, master alloys and castings - Writing rules for chemical composition
Aluminium and aluminium alloys - Scrap - Mixed turnings consisting of two or more alloys
Specification - Cold compressed hand forgings of aluminium-zinc-magnesium-copper-chromium alloy
(solution treated and artificially aged to an overaged condition) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.22)
Aluminum and aluminium alloys - Castings - Chemical composition of castings for use in contact with
foodstuff
Aluminium and aluminium alloys - Sheet, strip and plate - Tolerances on dimensions and form for hot-
rolled products
Aluminium alloy AL-P2014A-T6511 - Extruded bars and sections a or D 150 mm
Aluminium and aluminium alloys - Scrap - Scrap consisting of two or more wrought alloys
Aluminium alloy AL-P2024-T3511 - Extruded bars and sections 1,2 mm a or D 150 mm
Aluminium and aluminium alloys - Forgings - Mechanical properties and additional property
requirements
Aluminium and aluminium alloys. Terms and definitions. General terms
Aluminium and aluminium alloys - Scrap - Scrap consisting of non-ferrous materials from shredding
processes destined to aluminium separation processes
Aluminium and aluminium alloys - Scrap - Wire and cable scrap
Aluminium and aluminium alloys - Scrap - Unalloyed aluminium scrap
Aluminium and aluminium alloys - Scrap - Turnings consisting of one single alloy
Aluminium and aluminium alloys - Wrought forging stock - Tolerances on dimensions and form
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Numerical
designation system
Aluminium alloy AL-P7009-T74 - Die forgings 3 mm a 150 mm
Hexagonal bars, drawn, in aluminium and aluminium alloys - Tolerance class h 11 - Width across flats
7 mm a 50 mm - Dimensions
Aluminium and aluminium alloys - Designation of unalloyed and alloyed aluminium ingots for
remelting, master alloys and castings - Chemical symbol based designation system
Aluminium and aluminium alloys - Designation of unalloyed and alloyed aluminium ingots for
remelting, master alloys and castings - Numerical designation system
Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils -
Specifications
Magnesium and magnesium alloys - Returns - Requirements, classification and acceptance
Procedure for inspection, testing and acceptance of aluminium-base and magnesium-base ingots and
castings
Specification for bars and extruded sections of aluminium-copper-magnesium-silicon-manganese
alloy (solution treated and artificially aged) (not exceeding 200 mm diameter or minor sectional
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Chemical
symbol based designation system
Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-
silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn
Specification for sheet and strip of aluminium-manganese alloy (temper designation H12 or H22)
Specification for sheet and strip of aluminium-manganese alloy (temper designation-O)
Specification for forging stock, bars, extruded sections and forgings of 99% aluminium
Specification for sheet and strip of 99% aluminium (temper designation-O)
Specification for ingots and castings of aluminium-copper-nickel-manganese-titanium-zirconium-
cobalt-antimony alloy (solution treated and artificially aged) (Cu 5.0, Ni 1.5, Mn 0.25, Ti 0.2, Zr 0.2, Co
Aluminium and aluminium alloys - Scrap - Part 10: Scrap consisting of used aluminium beverage
cans; German version EN 13920-10:2003
Aluminium and aluminium alloys - Scrap - Part 16: Scrap consisting of skimmings, drosses, spills and
metallics; German version EN 13920-16:2003
Aluminium and aluminium alloys - Reroll stock for general applications - Part 1: Specifications for hot
rolled reroll stock; German version EN 12482-1:1998
Aluminium and aluminium alloys - Scrap - Part 4: Scrap consisting of one single wrought alloy;
German version EN 13920-4:2003
Aluminium and aluminium alloys - Scrap - Part 2: Unalloyed aluminium scrap; German version EN
13920-2:2003
Aluminium and aluminium alloys - Scrap - Part 13: Mixed turnings consisting of two or more alloys;
German version EN 13920-13:2003
Aluminium and aluminium alloys - Reroll stock for general applications - Part 2: Specifications for cold
rolled reroll stock; German version EN 12482-2:1998
Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms; Trilingual version EN
12258-1:1998
Zinc and zinc alloys - Method of sampling - Specifications; German version EN 12060:1997
Aluminium and aluminium alloys - Anodizing - Part 11: Measurement of specular reflectance and
specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60° or 85°; German version EN
Aluminium and aluminium alloys - Terms and definitions - Part 4: Residues of the aluminium industry;
Trilingual version EN 12258-4:2004
Aluminium and aluminium alloys - Anodizing - Part 19: Rating system for the evaluation of pitting
corrosion; Grid method; German version EN 12373-19:2001
Aluminium and aluminium alloys - Anodizing - Part 12: Measurement of reflectance characteristics of
aluminium surfaces using integrating-sphere instruments; German version EN 12373-12:2000
Aluminium and aluminium alloys - Scrap - Part 8: Scrap consisting of non-ferrous materials from
shredding processes destined to aluminium separation processes; German version EN 13920-8:2003
Aluminium and aluminium alloys - Scrap - Part 9: Scrap from aluminium separation processes of non-
ferrous shredded materials; German version EN 13920-9:2003
Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions; English version of
DIN EN 1301-3:2008-12
Aluminium and aluminium alloys - Products for structural railway applications; Technical conditions for
inspection and delivery - Part 1: Extruded products; German version EN 13981-1:2003
Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and
delivery; English version of DIN EN 1301-1:2008-12
Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications;
English version of DIN EN 1396:2007-04
Aluminium and aluminium alloys - Scrap - Part 15: Decoated aluminium scrap from post-consumer
aluminium packagings; German version EN 13920-15:2003
Magnesium Extruded Sections; Permissible Variations
Switchgear; Extruded Channel Sections of Aluminium for Busbars
Aluminium and aluminium alloys - Sheet, strip and plate for electrotechnical applications; English
version of DIN EN 14121:2009-09
Aluminium and aluminium alloys - Scrap - Part 1: General requirements, sampling and tests; German
version EN 13920-1:2003
Aluminium and aluminium alloys - Tread plate - Specifications; English version of DIN EN 1386:2008-
05
Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties; English version of DIN
EN 1301-2:2008-12
Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063
- Part 1: Technical conditions for inspection and delivery; English version of DIN EN 12020-1:2008-06
Aluminium for use in electrical engineering - Part 2: Tubes, rods bars and sections Technical delivery
conditions
Aluminium and aluminium alloys - Scrap - Part 7: Scrap consisting of castings; German version EN
13920-7:2003
Aluminium and aluminium alloys - Scrap - Part 14: Scrap from post-consumer aluminium packagings;
German version EN 13920-14:2003
Aluminium and aluminium alloys - Anodizing - Part 10: Measurement of mean specific abrasion
resistance of anodic oxidation coatings using an abrasive jet test apparatus; German version EN
Anodized products of wrought aluminium and wrought aluminium alloys - Technical conditions of
delivery
Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification;
German version EN 13957:2008
Aluminium and aluminium alloys - Products for structural railway applications, Technical conditions for
inspection and delivery - Part 2: Plates and sheets; German version EN 13981-2:2004
Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications -
Specification; German version EN 13958:2008
Aluminium and aluminium alloys - Products for structural railway applications, Technical conditions for
inspection and delivery - Part 3: Castings; German version EN 13981-3:2006
Magnesium Extruded Sections; Design
Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and
transportation of dangerous goods; German version EN 14286:2008
Aluminium and aluminium alloys - Scrap - Part 6: Scrap consisting of two or more wrought alloys;
German version EN 13920-6:2003
Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for
the production of pressure equipment; German version EN 12392:2000
Aluminium and aluminium alloys - Terms and definitions - Part 3: Scrap; Trilingual version EN 12258-
3:2003
Aluminium and aluminium alloys - Scrap - Part 3: Wire and cable scrap; German version EN 13920-
3:2003
Magnesium semi-finished products; Properties
Semiproducts for railway vehicles - Bars, profiles and sheet of wrought aluminium alloys - Part 1:
Selection
Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions
for inspection and delivery - Part 4: Forgings; English version of DIN EN 13981-4:2007-02
Aluminium and aluminium alloys - Scrap - Part 12: Turnings consisting of one single alloy; German
version EN 13920-12:2003
Wrought magnesium alloys
Magnesium Extruded Sections; Technical Conditions of Delivery
Aluminium and aluminium alloys - Scrap - Part 5: Scrap consisting of two or more wrought alloys of
the same series; German version EN 13920-5:2003
Aluminium and aluminium alloys - Specific requirements on the chemical composition of products
intended to be used for the manufacture of packaging and packaging components; German version
Semiproduct for railway vehicles - Aluminium profiles - Ledges
Aluminium and aluminium alloys - Scrap - Part 11: Scrap from aluminium-copper radiators; German
version EN 13920-11:2003
Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for
inspection and delivery; English version of DIN EN 15088:2006-03
Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063
- Part 2: Tolerances on dimensions and form; English version of DIN EN 12020-2:2008-06
Aluminium and aluminium alloys - Forgings - Part 1: Technical conditions for inspection and delivery;
German version EN 586-1:1997
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 4: Square bars,
tolerances on dimensions and form; English version of DIN EN 755-4:2008-06
Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys
and castings - Part 3: Writing rules for chemical composition; German version EN 1780-3:2002
Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications; English
version of DIN EN 541:2007-03
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 2:
Chemical symbol based on designation system; German version EN 573-2:1994
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties;
English version of DIN EN 755-2:2008-06
Aluminium and aluminium alloys - Drawing stock - Part 2: Specific requirements for electrical
applications; German version EN 1715-2:2008
Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys
and castings - Part 1: Numerical designation system; German version EN 1780-1:2002
Aluminium and aluminium alloys - Circle and circle stock for general applications - Specifications;
German version EN 941:1995
Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding
applications; German version EN 1715-4:2008
Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form
for hot-rolled products; German version EN 485-3:2003
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances
on dimensions and form; English version of DIN EN 754-5:2008-06
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes,
tolerances on dimensions and form; German version EN 755-8:2008, Corrigendum to DIN EN 755-
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for
inspection and delivery; English version of DIN EN 754-1:2008-06
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances
on dimensions and form; English version of DIN EN 754-7:2008-06
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3:
Chemical composition and form of products; English version of DIN EN 573-3:2009-08
Aluminium and aluminium alloys - Foil - Part 2: Mechanical properties; English version of DIN EN 546-
2:2007-03
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes,
tolerances on dimensions and form; English version of DIN EN 755-7:2009-07
Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications; German
version EN 576:2003
Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties; English version of DIN EN
683-2:2007-03
Aluminium and aluminium alloys - Foil - Part 1: Technical conditions for inspection and delivery;
English version of DIN EN 546-1:2007-03
Aluminium and aluminium alloys - Environmental aspects of aluminium products - General guidelines
for their inclusion in standards; German version EN 15530:2008
Aluminium and aluminium alloys - Cast forging stock - Part 1: Technical conditions for inspection and
delivery; German version EN 604-1:1997
Aluminium and aluminium alloys - Cast forging stock - Part 2: Tolerances on dimensions and form;
German version EN 604-2:1997
Aluminium and aluminium alloys - Wrought forging stock - Part 3: Tolerances on dimensions and
form; German version EN 603-3:2000
Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties;
German version EN 1706:2010
Aluminium and aluminium alloys - HF seam welded tubes - Part 4: Tolerances on dimensions and
form for square, rectangular and shaped tubes; German version EN 1592-4:1997
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1:
Numerical designation system; German version EN 573-1:2004
Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils -
Specifications; German version EN 851:1995
Magnesium and magnesium alloys - Magnesium and magnesium alloy anodes, ingots and castings -
Designation system; German version EN 1754:1997
Aluminium and aluminium alloys - Forgings - Part 2: Mechanical properties and additional property
requirements; German version EN 586-2:1994
Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products
used for the fabrication of articles for use in contact with foodstuff; German version EN 602:2004
Aluminium and aluminium alloys - Wrought forging stock - Part 2: Mechanical properties; German
version EN 603-2:1996
Aluminium and aluminium alloys - Finstock - Part 3: Tolerances on dimensions and form; English
version of DIN EN 683-3:2007-03
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5: Rectangular bars,
tolerances on dimensions and form; English version of DIN EN 755-5:2008-06
Aluminium and aluminium alloys - HF seam welded tubes - Part 2: Mechanical properties; German
version EN 1592-2:1997
Aluminium and aluminium alloys - Foil - Part 4: Special property requirements; English version of DIN
EN 546-4:2007-03
Aluminium and aluminium alloys - HF seam welded tubes - Part 3: Tolerances on dimensions and
form for circular tubes; German version EN 1592-3:1997
Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties; comparision
of temper designations
Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications; German version EN
1676:2010
Aluminium and aluminium alloys - Wrought forging stock - Part 1: Technical conditions for inspection
and delivery; German version EN 603-1:1996
Aluminium and aluminium alloys - Test methods - Earing test for sheet and strip; German version EN
1669:1996
Aluminium and aluminium alloys - Liquid metal - Specifications; German version EN 577:1995
Magnesium and magnesium alloys - Magnesium alloy ingots and castings; German version EN
1753:1997
Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys
and castings - Part 2: Chemical symbol based designation system; German version EN 1780-2:2002
Aluminium and aluminium alloys - Forgings - Part 3: Tolerances on dimensions and form; German
version EN 586-3:2001
Aluminium and aluminium alloys - HF seam welded tubes - Part 1: Technical conditions for inspection
and delivery; German version EN 1592-1:1997
Aluminium and aluminium alloys; sheet, strip and plate; part 4: tolerances on shape and dimensions
for cold-rolled products; German version EN 485-4:1993
Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with
foodstuff; German version EN 601:2004
Testing of carbonaceous materials - Green and calcined coke - Determination of trace elements by
flame atomic absorption spectroscopy (ISO 8658:1997)
Aluminium and aluminium alloys - Finstock - Part 1: Technical conditions for inspection and delivery;
English version of DIN EN 683-1:2007-03
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes,
tolerances on dimensions and form; English version of DIN EN 755-8:2008-06
Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products -
Specification; English version of DIN EN 570:2007-04
Aluminium and aluminium alloys - Drawing stock - Part 3: Specific requirements for mechanical uses
(excluding welding); German version EN 1715-3:2008
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3: Round bars, tolerances
on dimensions and form; English version of DIN EN 755-3:2008-06
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances
on dimensions and form; English version of DIN EN 754-6:2008-06
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on
dimensions and form; English version of DIN EN 754-8:2008-06
Aluminium and aluminium alloys - Drawing stock - Part 1: General requirements and technical
conditions for inspection and delivery; German version EN 1715-1:2008
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5:
Codification of standardized wrought products; English version of DIN EN 573-5:2007-11
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on
dimensions and form; English version of DIN EN 754-4:2008-06
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on
dimensions and form; English version of DIN EN 754-3:2008-06
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties;
English version of DIN EN 754-2:2008-06
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on
dimensions and form; English version of DIN EN 755-9:2008-06
Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties; English
version of DIN EN 485-2:2009-01
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties;
German version EN 755-2:2008, Corrigendum to DIN EN 755-2:2008-06
Aluminium and aluminium alloys - Master alloys produced by melting - Specifications; German version
EN 575:1995
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on
dimensions and form; German version EN 755-9:2008, Corrigendum to DIN EN 755-9:2008-06
Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions; English version of DIN EN
546-3:2007-03
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 6: Hexagonal bars,
tolerances on dimensions and form; English version of DIN EN 755-6:2008-06
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions
for inspection and delivery; English version of DIN EN 755-1:2008-06
Aluminium and aluminium alloys; wrought products; temper designations; German version EN
515:1993
Use of Permanent Mold Cast Aluminum Alloys UNS A13560 and A03570 Section VIII, Division 1
Aluminum Alloy 3003-H24 for Code Construction Section VIII, Division 1
Use of Sand Cast Aluminum Alloy A356.0, T6 Temper, for the Manufacture of Hot Water Heating
Boilers Under Part HC Section IV
Aluminum Alloy EN AW-6082-T6 Fittings for Nonwelded Construction Section VIII, Division 1
Use of Sand Case Aluminum Alloy EN AC-AlSi10Mg(a), F Temper, in the Manufacture of Hot Water
Heating Boilers Under Part HC Section IV; SUPP 8&9
Aluminum Alloy (Aluminum-6.3Magnesium) for Code Construction Section VIII, Division 1 SUPP 8&9
Use of Semi-Permanent Mold Case Aluminum Alloy A356.0 for the Manufacture of Heating Boilers
Under Part HC Section IV (ANNULLED) (SUPP 12)
Use of 6061-T6 and 6061-T651 Aluminum for Class 1 Nuclear Components Section III, Division 1;
ANNULLED; SUPP 7 Supplement 7
Use of SB-209 5052-H32 Temper Aluminum Alloy in Part HF of Section IV, for Construction of
Heating Boilers Sections IV and II-B; (SUPP 11)
Specification for Aluminum and Aluminum-Alloy Sheet and Plate ASTM B209-96
Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes ASTM B210-95
SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY DRAWN SEAMLESS TUBES
Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire ASTM B211-99
Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, and Profiles ASTM B221-96
Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat
Exchangers ASTM B234-95
Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube ASTM
B241/B241M-99
Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles ASTM B308/B308M-96
Standard Specification for Shelter, Tactical, Nonexpandable
Specification for Zinc-Copper-Aluminum Alloy Die Castings
Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes [Metric]
Specification for Zinc-Aluminum Alloys in Ingot Form for Foundry and Die Castings
Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-
Purpose Applications
Specification for Zinc-5 % Aluminum-Mischmetal Alloy (UNS Z38510) in Ingot Form for Hot-Dip
Coatings
Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and
Tubes [Metric]
Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire [Metric]
Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type
Transportable Shelters
Specification for Zinc-Aluminum (Za) Alloy Foundry and Die Castings
Standard Digital Reference Images for Inspection of Aluminum Castings
Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable
Aluminum Alloy Products Using Breaking Load Method
Standard Specification for Magnesium-Alloy Die Castings
Standard Specification for Aluminum for Use in Iron and Steel Manufacture
Standard Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating
Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum
Products
Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and
Profiles for Electrical Purposes (Bus Conductor)
Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled
Ring Forgings
Standard Specification for GALFAN (Zinc-5 % Aluminum-Mischmetal) Alloy in Ingot Form for Hot-Dip
Coatings
Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting
Processes
Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate
Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy
Products
Standard Specification for Aluminum and Aluminum-Alloy Round Welded Tubes
Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles
Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers
and Heat Exchangers
Standard Test Method for Shear Testing of Aluminum Alloys
Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate [Metric]
Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis
Standard Specification for Aluminum-Alloy Sand Castings
Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy
Products [Metric]
Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Atomic Emission
Spectrometry
Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes
Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
Standard Specification for Magnesium Alloy Anodes for Cathodic Protection
Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum
Production
Standard Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate
Standard Specification for Magnesium-Alloy Investment Castings
Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys
Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold
Castings, and Die Castings
Standard Specification for Shelter, Tactical, Expandable, One-Side
Standard Specification for Aluminum Foil for Capacitors
Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire
Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and
Similar Environments
Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube
Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding
Stock
Standard Specification for Aluminum Alloy Chain Link Fence Fabric
Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers
and Heat Exchangers [Metric]
Standard Specification for Magnesium-Alloy Forgings
Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission
Spectrometry
Standard Practice for Heat Treatment of Wrought Aluminum Alloys
Standard Terminology Relating to Aluminum- and Magnesium- Alloy Products
Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and
Cathode Carbon Used by the Aluminum Industry
Standard Specification for Magnesium-Alloy Sheet and Plate
Standard Specification for Aluminum-Alloy Rolled Tread Plate
Standard Practice for Heat Treatment of Magnesium Alloys
Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by X-Ray
Fluorescence
Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded
Tube
Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food
Contact, and Other Applications
Standard Specification for Shelter, Tactical, Expandable, Two-Side
Standard Specification for Magnesium-Alloy Permanent Mold Castings
Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature
Shaping Process for Production of T1, T2, T5 and T10-Type Tempers
Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and
Tubes
Standard Specification for Pure Aluminum (Unalloyed) Source Material for Vacuum Coating
Applications
Standard Practice for Fracture Toughness Testing of Aluminum Alloys
Standard Practice for Standardizing Equipment for Electromagnetic Examination of Seamless
Aluminum-Alloy Tube
Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded
Tube
Standard Guide for Preparation of Aluminum Alloys for Electroplating
Standard Specification for Pure Aluminum (Unalloyed) Source Material for Electronic Thin Film
Applications
Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire
Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic
Measurement
ERRATUM
Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled
Ring Forgings [Metric]