2024年3月11日发(作者：左丘萍雅)
aruba交换机配置-实战篇
一，忘记密码按以下操作
超级账号密码
password
forgetme!
!
Admin 密码修改
ArubaS2500-24P) (config) #mgmt-user admin root
Password:******** //admin123!
Re-Type password:******** //admin123!
(ArubaS2500-24P) (config) #end
Enable 密码重新设置
(ArubaS2500-24P) (config) #enable secret?
secret Enter the enable password
(ArubaS2500-24P) (config) #enable secret
Password:****** 、直接输入新密码、
Re-Type password:****** 再次输入
这个账号只能用于需改密码，需要配置的话要退出用admin账号
进入才能操作
二，交换机初始化
<<<<< Welcome to Aruba Networks - Aruba S2500-
24P >>>>>
User: admin
Password: ******** ///admin123//默认密码
(ArubaS2500-24P) >enable
Password:****** //enable
Quick-setup helps in setting the basic configuration of the
system Autoconfiguration of system will be stopped, if Quick-
setup is launched by user
Invoke Quick-setup (y|n) [y]:y
***************** Welcome to the ArubaS2500-24P setup
dialog ***************** This dialog will help you to set the basic
configuration for the switch.
These settings, except for the Country Code, can later be
changed from the Command Line Interface or Graphical User
Interface.
Commands: Submit input or use [default value], Help
Back, Forward, Line begin, Line end
Delete, Delete back, Delete to end of line
Previous question , Restart beginning, to exit
Enter System name [ArubaS2500-24P]: aruba2500-xmu-2f
Configure inband management VLAN [yes|no]: yes 是否开启
管理VLAN
Inband management vlan id [1]: 711 管理VLAN段
Enter the member interfaces for management VLAN
(Example 0/0/0,0/0/1): 0/0/23,0/1/1 添加需要trunk的端口
Enter management VLAN IP address [172.16.0.254]:
172.31.11.2 管理ip
Enter mgmt VLAN interface subnet mask [255.255.255.0]: 回
车
Enter Out of band management interface IP address [none]:
回车
Enter IP Default gateway [none]: 172.31.11.1 网关
Enter Country code (ISO-3166), for supported list: CN 中国
You have chosen Country code CN for China (yes|no)?: yes
Enter Time Zone [PST-8:0]: CST+8:0
Enter Time in UTC [03:48:15]:
Enter Date (MM/DD/YYYY) [7/4/2013]:
Enter Password for admin login (up to 32 chars): *********
2024年3月11日发(作者：左丘萍雅)
aruba交换机配置-实战篇
一，忘记密码按以下操作
超级账号密码
password
forgetme!
!
Admin 密码修改
ArubaS2500-24P) (config) #mgmt-user admin root
Password:******** //admin123!
Re-Type password:******** //admin123!
(ArubaS2500-24P) (config) #end
Enable 密码重新设置
(ArubaS2500-24P) (config) #enable secret?
secret Enter the enable password
(ArubaS2500-24P) (config) #enable secret
Password:****** 、直接输入新密码、
Re-Type password:****** 再次输入
这个账号只能用于需改密码，需要配置的话要退出用admin账号
进入才能操作
二，交换机初始化
<<<<< Welcome to Aruba Networks - Aruba S2500-
24P >>>>>
User: admin
Password: ******** ///admin123//默认密码
(ArubaS2500-24P) >enable
Password:****** //enable
Quick-setup helps in setting the basic configuration of the
system Autoconfiguration of system will be stopped, if Quick-
setup is launched by user
Invoke Quick-setup (y|n) [y]:y
***************** Welcome to the ArubaS2500-24P setup
dialog ***************** This dialog will help you to set the basic
configuration for the switch.
These settings, except for the Country Code, can later be
changed from the Command Line Interface or Graphical User
Interface.
Commands: Submit input or use [default value], Help
Back, Forward, Line begin, Line end
Delete, Delete back, Delete to end of line
Previous question , Restart beginning, to exit
Enter System name [ArubaS2500-24P]: aruba2500-xmu-2f
Configure inband management VLAN [yes|no]: yes 是否开启
管理VLAN
Inband management vlan id [1]: 711 管理VLAN段
Enter the member interfaces for management VLAN
(Example 0/0/0,0/0/1): 0/0/23,0/1/1 添加需要trunk的端口
Enter management VLAN IP address [172.16.0.254]:
172.31.11.2 管理ip
Enter mgmt VLAN interface subnet mask [255.255.255.0]: 回
车
Enter Out of band management interface IP address [none]:
回车
Enter IP Default gateway [none]: 172.31.11.1 网关
Enter Country code (ISO-3166), for supported list: CN 中国
You have chosen Country code CN for China (yes|no)?: yes
Enter Time Zone [PST-8:0]: CST+8:0
Enter Time in UTC [03:48:15]:
Enter Date (MM/DD/YYYY) [7/4/2013]:
Enter Password for admin login (up to 32 chars): *********