2024年3月11日发(作者：邢芷天)

一，忘记密码按以下操作

超级账号密码

password

forgetme!

!

Admin 密码修改

ArubaS2500-24P) (config) #mgmt-user admin root

Password:******** //admin123!

Re-Type password:******** //admin123!

(ArubaS2500-24P) (config) #end

Enable 密码重新设置

(ArubaS2500-24P) (config) #enable secret?

secret Enter the enable password

(ArubaS2500-24P) (config) #enable secret

Password:****** 、直接输入新密码、

Re-Type password:****** 再次输入

这个账号只能用于需改密码，需要配置的话要退出用admin账号进入才能操作

二，交换机初始化

<<<<< Welcome to Aruba Networks - Aruba S2500-24P >>>>>

User: admin

Password: ******** ///admin123//默认密码

(ArubaS2500-24P) >enable

Password:****** //enable

Quick-setup helps in setting the basic configuration of the system

Autoconfiguration of system will be stopped, if Quick-setup is launched by user

Invoke Quick-setup (y|n)??? [y]:y

***************** Welcome to the ArubaS2500-24P setup dialog *****************

This dialog will help you to set the basic configuration for the switch.

These settings, except for the Country Code, can later be changed from the

Command Line Interface or Graphical User Interface.

Commands: Submit input or use [default value], Help

Back, Forward, Line begin, Line end

Delete, Delete back, Delete to end of line

Previous question , Restart beginning, to exit

Enter System name [ArubaS2500-24P]: aruba2500-xmu-2f

Configure inband management VLAN [yes|no]: yes 是否开启管理VLAN

Inband management vlan id [1]: 711 管理VLAN段

Enter the member interfaces for management VLAN (Example 0/0/0,0/0/1): 0/0/23,0/1/1 添加需

要trunk的端口

Enter management VLAN IP address [172.16.0.254]: 172.31.11.2 管理ip

Enter mgmt VLAN interface subnet mask [255.255.255.0]: 回车

Enter Out of band management interface IP address [none]:

Enter IP Default gateway [none]: 172.31.11.1

Enter Country code (ISO-3166), for supported list: CN

You have chosen Country code CN for China (yes|no)?: yes

Enter Time Zone [PST-8:0]: CST+8:0

Enter Time in UTC [03:48:15]:

Enter Date (MM/DD/YYYY) [7/4/2013]:

Enter Password for admin login (up to 32 chars): *********

Re-type Password for admin login: *********

Enter Password for enable mode (up to 15 chars): ******

Re-type Password for enable mode: ******

Current choices are:

System name: aruba2500-xmu-2f

Configure inband management VLAN: yes

vlan id for inband management [1-4094]: 711

Members interfaces of management VLAN: 0/0/23,0/1/1

IP address of management VLAN: 172.31.11.2

Management VLAN interface subnet mask: 255.255.255.0

IP Default gateway: 172.31.11.1

Country code: CN

Time Zone: CST+8:0

Type to go back and change answer for any question

Do you wish to accept the changes (yes|no|abort): yes

Done.

网关

中国

//admin123!

//admin123!

//enablle

//enable

回车

2024年3月11日发(作者：邢芷天)

一，忘记密码按以下操作

超级账号密码

password

forgetme!

!

Admin 密码修改

ArubaS2500-24P) (config) #mgmt-user admin root

Password:******** //admin123!

Re-Type password:******** //admin123!

(ArubaS2500-24P) (config) #end

Enable 密码重新设置

(ArubaS2500-24P) (config) #enable secret?

secret Enter the enable password

(ArubaS2500-24P) (config) #enable secret

Password:****** 、直接输入新密码、

Re-Type password:****** 再次输入

这个账号只能用于需改密码，需要配置的话要退出用admin账号进入才能操作

二，交换机初始化

<<<<< Welcome to Aruba Networks - Aruba S2500-24P >>>>>

User: admin

Password: ******** ///admin123//默认密码

(ArubaS2500-24P) >enable

Password:****** //enable

Quick-setup helps in setting the basic configuration of the system

Autoconfiguration of system will be stopped, if Quick-setup is launched by user

Invoke Quick-setup (y|n)??? [y]:y

***************** Welcome to the ArubaS2500-24P setup dialog *****************

This dialog will help you to set the basic configuration for the switch.

These settings, except for the Country Code, can later be changed from the

Command Line Interface or Graphical User Interface.

Commands: Submit input or use [default value], Help

Back, Forward, Line begin, Line end

Delete, Delete back, Delete to end of line

Previous question , Restart beginning, to exit

Enter System name [ArubaS2500-24P]: aruba2500-xmu-2f

Configure inband management VLAN [yes|no]: yes 是否开启管理VLAN

Inband management vlan id [1]: 711 管理VLAN段

Enter the member interfaces for management VLAN (Example 0/0/0,0/0/1): 0/0/23,0/1/1 添加需

要trunk的端口

Enter management VLAN IP address [172.16.0.254]: 172.31.11.2 管理ip

Enter mgmt VLAN interface subnet mask [255.255.255.0]: 回车

Enter Out of band management interface IP address [none]:

Enter IP Default gateway [none]: 172.31.11.1

Enter Country code (ISO-3166), for supported list: CN

You have chosen Country code CN for China (yes|no)?: yes

Enter Time Zone [PST-8:0]: CST+8:0

Enter Time in UTC [03:48:15]:

Enter Date (MM/DD/YYYY) [7/4/2013]:

Enter Password for admin login (up to 32 chars): *********

Re-type Password for admin login: *********

Enter Password for enable mode (up to 15 chars): ******

Re-type Password for enable mode: ******

Current choices are:

System name: aruba2500-xmu-2f

Configure inband management VLAN: yes

vlan id for inband management [1-4094]: 711

Members interfaces of management VLAN: 0/0/23,0/1/1

IP address of management VLAN: 172.31.11.2

Management VLAN interface subnet mask: 255.255.255.0

IP Default gateway: 172.31.11.1

Country code: CN

Time Zone: CST+8:0

Type to go back and change answer for any question

Do you wish to accept the changes (yes|no|abort): yes

Done.

网关

中国

//admin123!

//admin123!

//enablle

//enable

回车