2024年3月14日发(作者：仙诗槐)
Fast Charging
Solo 3 Home
User Guide
PP-D-200055-4
S3-UK-H-UG
Solo 3 Home
This user guide is written for drivers charging from home privately with the Solo 3 .If you share your charging hardware with others -
please use our commercial & shared residential user guide - located on our technical documents page.
1. Connect your Solo 3 to Wi-Fi
Your Solo 3 should be connected to Wi-Fi during installation by your Pod Point Expert. If this is not possible or
has not been completed, please see below for a quick guide on how to do it.
We’d recommend resetting your Solo 3 prior to starting this process via the consumer unit (fuse box) this will
make the Pod Point Network easier to find and connect to. Please also ensure you have your Wi-Fi password
ready and complete this steps as near to your Solo 3 as possible.
1
Find the “podpoint” Wi-Fi
network on a mobile
device and press
connect.
2
Open your web browser,
type in the sequence
below of numbers and
full stops into the
address bar.
3
Pick your home Wi-Fi
network from the list and
type the password.
Press “Connect”.
4
The new settings will take
5-10 minutes to activate.
You can activate them
immediately if you switch
your charger off and on
again. Status light should go
blue with a short pink flash
every few seconds.
192.168.1.1
If the status light remains
white, you may need to
restart the Solo 3 again and
verify the settings.
2. Download the Pod Point App
The Pod Point App is available for both iOS and Android mobile devices.
For iOS devices, download
on the App Store.
For Android devices,
download on the
Google Play Store.
The Pod Point App is compatible with Android devices running Android OS 5.0 API 21 (Lollipop, released 2014)
and above. For Apple devices, compatible with iPhones running iOS 9 (released 2015) and above.
Solo 3 Home
User Guide
PP-D-200055-4
S3-UK-H-UG
2024年3月14日发(作者：仙诗槐)
Fast Charging
Solo 3 Home
User Guide
PP-D-200055-4
S3-UK-H-UG
Solo 3 Home
This user guide is written for drivers charging from home privately with the Solo 3 .If you share your charging hardware with others -
please use our commercial & shared residential user guide - located on our technical documents page.
1. Connect your Solo 3 to Wi-Fi
Your Solo 3 should be connected to Wi-Fi during installation by your Pod Point Expert. If this is not possible or
has not been completed, please see below for a quick guide on how to do it.
We’d recommend resetting your Solo 3 prior to starting this process via the consumer unit (fuse box) this will
make the Pod Point Network easier to find and connect to. Please also ensure you have your Wi-Fi password
ready and complete this steps as near to your Solo 3 as possible.
1
Find the “podpoint” Wi-Fi
network on a mobile
device and press
connect.
2
Open your web browser,
type in the sequence
below of numbers and
full stops into the
address bar.
3
Pick your home Wi-Fi
network from the list and
type the password.
Press “Connect”.
4
The new settings will take
5-10 minutes to activate.
You can activate them
immediately if you switch
your charger off and on
again. Status light should go
blue with a short pink flash
every few seconds.
192.168.1.1
If the status light remains
white, you may need to
restart the Solo 3 again and
verify the settings.
2. Download the Pod Point App
The Pod Point App is available for both iOS and Android mobile devices.
For iOS devices, download
on the App Store.
For Android devices,
download on the
Google Play Store.
The Pod Point App is compatible with Android devices running Android OS 5.0 API 21 (Lollipop, released 2014)
and above. For Apple devices, compatible with iPhones running iOS 9 (released 2015) and above.
Solo 3 Home
User Guide
PP-D-200055-4
S3-UK-H-UG