2024年3月19日发(作者：信婉容)
2
Proprietary Calibration Software
Palette Master Element software simplifies calibration and reliably produces accurate color results.
Palette Master Element can be used to fine tune the color engine in SW series monitors and fully
supports certain X-Rite / Calibrite / Datacolor colorimeters.
NOTE:
•
•
Illustrations for reference only. Vary by purchased model.
To find out the fully supported colorimeters, visit BenQ website for the latest information.
ing Palette Master Element
For Windows
Double-click on the icon
For Mac
Double-click on the icon in the Dock
Palette Master
Element
Attention
X
Check to see that the USB cable is connected to both the monitor and the computer.
X
Check to see that colorimeter is connected to the monitor’s USB port.
X
You are recommended to use the original USB-C™ cable that came with the monitor. If a separately purchased
USB-C™ cable is used, make sure the cable is certified by USB-IF and is full-featured, with power delivery and
video / audio / data transfer functions.
X
Converters/adapters are not recommended to connect your source device to the monitor, as the compatibility
of the converters/adapters in the market cannot be guaranteed.
X
Before monitor calibration, turn on both the monitor and the computer to warm up for 30 minutes.
X
Disable the power management functions of the computer and the monitor. Make sure that both will not in
power save mode and the screen saver will not be activated during adjustment or measurement.
Launching Palette Master Element
2024年3月19日发(作者：信婉容)
2
Proprietary Calibration Software
Palette Master Element software simplifies calibration and reliably produces accurate color results.
Palette Master Element can be used to fine tune the color engine in SW series monitors and fully
supports certain X-Rite / Calibrite / Datacolor colorimeters.
NOTE:
•
•
Illustrations for reference only. Vary by purchased model.
To find out the fully supported colorimeters, visit BenQ website for the latest information.
ing Palette Master Element
For Windows
Double-click on the icon
For Mac
Double-click on the icon in the Dock
Palette Master
Element
Attention
X
Check to see that the USB cable is connected to both the monitor and the computer.
X
Check to see that colorimeter is connected to the monitor’s USB port.
X
You are recommended to use the original USB-C™ cable that came with the monitor. If a separately purchased
USB-C™ cable is used, make sure the cable is certified by USB-IF and is full-featured, with power delivery and
video / audio / data transfer functions.
X
Converters/adapters are not recommended to connect your source device to the monitor, as the compatibility
of the converters/adapters in the market cannot be guaranteed.
X
Before monitor calibration, turn on both the monitor and the computer to warm up for 30 minutes.
X
Disable the power management functions of the computer and the monitor. Make sure that both will not in
power save mode and the screen saver will not be activated during adjustment or measurement.
Launching Palette Master Element