2024年3月19日发(作者：迮昕昕)
Optiplex常见机型最新BIOS中英文对照表
（有些项目为机器可选配置）
General 常规信息
System Board Displays the following information:
System information: Displays BIOS Version,
Service Tag,Express Service Code,Asset
Tag, Manufacture Date, and the Ownership
Date.
Memory information: Displays Installed
Memory, Memory Speed, Number of Active
Channels, Memory Technology,DIMM_1
Size,DIMM_2 Size.
Processor information: Displays the
Processor Type, Processor Speed, Processor
Bus Speed, Processor L2 cache, Processor
ID, Microcode Version, Multi Core Capable
and HT Capable 64-bit Technology.
Slot Information: Displays available slots
on the system board.
该项目显示以下详细信息：
系统信息： BIOS 版本,
机器服务编号, 快速服
务代码, 资产编号, 出
厂日期,Ownership日
期.
内存信息: 安装内存容
量；可用内存容量；当
前内存频率；Memory通
道； Memory技术；
DIMM_1容量；DIMM _2
容量
CPU 信息: CPU型号；
CPU频率；CPU 总线 频
率；CPU 2级缓存；CPU
ID ；处理器代码版本；
多核数；HT 64位技术。
插槽信息: 显示主板可
用插槽信息。
Date/Time Displays the system date and time. Changes to the 显示当前的日期和时间。
system date and time take effect immediately.
Drives
Diskette drive
软驱设备
This field determines how the BIOS configures 该项可以设置软驱。
floppy drives, Operating Systems with USB support
禁用 - 禁用所有软驱。
will recognize USB Floppy drives regardless of
启用 - 启用所有软驱。
this setting:
Disable - All Floppy drive are disable
Enable - All floppy drive are enable.
☆ NOTE:
The "；USB Controller"； Setup option will
affect floppy operation.
☆ 注意:
The "；USB Controller"；
设置选项也将控制USB软
驱。
SATA Operation
SATA设置
configures the operating mode og the integrated SATA Operation 设置选项：
hard drive controller
禁用，ATA ， AHCI 和 Raid On
RAID Autodetect / AHCI = RAID if signed
默认设置是 Raid On=SATA 设
drives, otherwise AHCI
置支持Raid
RAID Autodetect / ATA= RAID if signed
drives, otherwise ATA
RAID 自动检测 / AHCI
RAID On / ATA= SATA is configured for RAID
= 设置自动检测RAID，
on every boot
如无Raid 即AHCI 模
Legacy = The hard drive controller is
式
configured for legacy mode
RAID 自动检测 / ATA=
设置自动检测RAID，如
☆ NOTE:
无Raid 即ATA 模式
Legacy mode provides for compatibility with
some older operating systsems that do not
support native resources assigned to the
drive controller.
RAID Mode is incompatible with ImageServer.
Please disable RAID mode if enabling Image
Server.
RAID On / ATA= 配置
SATA模式每次开机都
启动Raid。
Legacy = The hard
drive controller is
configured for legacy
mode
Legacy模式提供对一些旧操
作系统的硬盘控制器的兼容模
式。
S.M.A.R.T.
Reporting
This field controls whether hard drive errors for S.M.A.R.T.
integrated drives are reported during system
startup. This technology is part of the SMART(Self
该项可以设置在系统启动时提
Monitoring Analysis and Reporting Technology)
供硬盘错误信息报告。该技术
是S.M.A.R.T.（自我管理分析
specification.
与报告技术）的一部分。
This option is disabled by default.
默认禁用。
Enables or disables the SATA drives connected to 启用或禁用SATA设备连接到
the system board. 主板上。
Specifies the order in which the computer attempts 计算机尝试从以下列表顺序启
to find an operating system from the devices 动：
specified in this list.
软驱
Onboard or USB Floppy
SATA 硬盘
Onboard SATA Hard Drive
Drives
Boot Sequence
Onboard or USB CD-Rom Drive
System Configuration 系统配置
光驱
Integrated NIC Enables or disables the integrated network card. 启用和禁用集成网卡：
You can set the integrated NIC to:
该项可以设置：
Disable
禁用
Enable (default)
启用（默认项目）
Enable with PXE
启用PXE
Enable with ImageSever
启用ImageSever（ 该
功能目前只在美国销
☆ NOTE:
售）
PXE is needed only if intending to boost to
an operating system located on a server, not
if you are bootinng on an OS located on a hard
drive in this system.
USB Controller Enables or disables the integrated USB controller. 启用或禁用集成USB控制器。
You can set the USB controller to:
可设置:
Enable
启用（默认项目）
(default)
默认
不启动
Disable
No boot
☆ NOTE:
Operating systems with USB support will
recognize USB Storage
Parallel Port
并口
Identifies and defines the parallel port settings. 并口设置选项：
You can set the parallel port to:
禁用
Disable
AT
AT
PS/2 (默认选项)
PS/2 (default)
EPP
EPP
ECP No DMA
ECP No DMA
ECP DMA 1
ECP DMA 1
ECP DMA 3
ECP DMA 3
Sets the base I/O address of the integrated
parallel port.
设置集成并口I/O地址。 Parallel Port
Address
Serial Port #1 Identifies and defines the serial port settings. 串口设置选项：
You can set the serial port to:
禁用，
Disable
自动 (默认选项)
Auto
(default)
COM1
COM3
COM1，
COM3，
☆ NOTE:
The Operating System may allocate resources
even though the setting is disabled.
Miscellaneous
Devices
多种设备设置
Enables or disables the following onboard devices: 启用或禁用下面设备：
Front USB
PCI slots
Audio
OptiPlex ON Reader
Rear Quad USB
PCI Slots
WiFi NIC Slot
Video 显示设置
前置USB
PCI插槽
声卡
OptiPlex ON Reader
后置 USB
无线网卡插槽
Primary Video This field determines which video controller will 该页面可以设置当系统连接2
become the primary video controller when 2 块显卡时，哪一个为主显示。
controllers are available in the system. This
自动(默认选项) - 使
selection matters only if there are 2 video
用连接的独立显卡。
controller present.
主板/PEG - 不接独立
Auto(default) - Use the add-in video 显卡时，将识别集成显
controller. 卡，当 PCI Express
Onboard/PEG - Use the integrated video Graphic(PEG) 显卡连
controller unless a Graphic care is 接时禁用集成显卡。
installed. A PCI Express Graphic(PEG) card
will override and disable the integrated
video controller.
Performance 性能设置
Multi Core
Support
多核支持
This field specifies whether the processor will 该项是否启用1个或所有CPU
have one or all cores enable. The performance of 的核数。
some application will improve with the additional
增加CPU核数，将提供很多程
cores.
序的性能。
This option is enabled by default.
默认启用。
This option enables or disables the 该项启用或禁用超线程技术。
Hyper-Threading Technology. When disabled, only 当禁用，仅仅单线程工作。
one thread per enabled core is enabled
默认启用。
This option is enabled by default.
Hyper-Threading
Technology
超线程技术
Intel®；； Turbo This option enables or disables the Intel®；； Turbo 启用或禁用Intel
Boost Technology Boost Technology. When disabled, Intel®；； Turbo TurboBoost。
Boost Technology allows processor(s) to run at
frequencies higher than the advertised frequency
禁用该项，Intel TurboBoost
允许CPU工作在比标称频率高
This option is enabled by default. 的频率允许。
默认是启用。
Intel®；；
SpeedStep™；；
This option enables or disables the Intel®；； 启用或禁用CPU性能模式。
SpeedStep™；； mode of the processor. When
disabled, the system is placed into the highest
禁用该项，系统将始终工作在
performance state and the Intel®；； SpeedStep™；； 最高的性能状态。系统将不能
applet or native operating system driver are 自动调节CPU的性能。
prevented from adjusting the processor's
启用SpeedStep
performance. When enable. the Intel®；；
SpeedStep™；；, enabled CPU is allowed to operate
默认是启用。
in multiple performance states.
This option is enbaled by default.
C stated Control This option enables or disables additional 启用或禁用额外的CPU的休眠
processor sleep states. The operating system may 状态。当CPU闲置时，操作系
optionally use these for additional power savings 统可随意将额外的CPU进入休
when idle. 眠以节能。
This option is enabled by default. 默认是启用。
Limit CPUID Value This field limits the maximum value the processor 该项目可限制CPU标准的
Standard CPUID Function will support. Some CPUID可支持的 最大量。有些
operating systems will not complete installation 操作系统在CPUID最大量支持
when the maximum CPUID Function supported is 超过3时，将无法正常安装。
greater than 3.
默认是禁用。
This option is disabled by default.
Virtualization Support 虚拟化支持
Virtualization
虚拟化
This Option specifies whether a Virtual Machine
该界面设置：虚拟计算机是否
Monitor (VMM) can utilize the additional hardware
可以利用额外的硬件兼容性提
capabilities provided by Intel®；； Virtualization
供Intel 虚拟化技术。
Technology.
点击复选框，启用或禁用虚拟
Enable Intel®；； Virtualization Technology - This 化技术
option is enabled by default.
默认：启用
VT for Direct I/O Enables or disables the Virtual Machine Monitor 该界面设置：虚拟计算机是否
(VMM) from utilizing the additional hardware 可以利用额外的硬件兼容性提
capabilities provided by Intel®；； Virtulization 供Direct I/O的Intel 虚拟
technology for direct I/O. 化技术。
Enable Intel®；； Virtualization Technology for 点击复选框，启用或禁用
Direct I/O - This option is disabled by default. Direct I/O的虚拟化技术。
默认：禁用
Trusted Execution This field specifies whether a Measured Virtual 该页面确认是否启用安全执行
Machine(MVMM) can utilize the additional hardware 功能。TPM ，虚拟化技术，
capabilities provided by Intel®；； Trusted Direct I/O的虚拟化技术都必
Execution Technology. The TPM Virtualization 须启用Trusted Execution功
Technology and Virtualization Technology for 能。
Direct I/O must be enable to use this feature.
默认：禁用
Enable Intel®；； Trusted Execution Technology -
This option is disabled by default.
Security 安全设置
Administrative
Password
Provides restricted access to the computer's Admin 密码是对BIOS进行修
system setup program in the same way that access 改的权限。
to the system can be restricted with the System
Password option.
This option is not set by default.
System Password
默认没有设置。
Displays the current status of the system's 系统密码是BIOS开机的密码。
password security feature and allows a new system
默认没有设置。
password to be assigned and verified.
This option is not set by default.
Password Changes Enables or disables the user from changing the 在没有Admin密码时，启用或
system password without the administrative 禁用修改系统密码。
password.
默认启用修改系统密码。
This option is enabled by default.
Admin Setup
Lockout
Admin锁定
Password
Configuration
密码配置
Enables or disables the user from entering Setup 当设置了Admin 密码，将阻止
when an Admin password is set. 其他用户进入BIOS。
This option is disabled by default.
These fields control the minimum and maximum 分别设置Admin或系统密码的
number of characters allowed for Admin and System 最小和最大的字符数设置。
passwords. Changes to these fields are not active
until they are committed via the apply button or
saving changes before exiting setup.
Admin Password Min
Admin Password Max
System Password Min
System Password Max
Strong Password
强安全密码
This field enforces strong passwords. If enabled, 启用强大密码功能，所有的密
all passwords must contain at least one uppercase 码设置时必须包括至少一个大
character, one lowercase character, and be at 写字母和一个小写字母，至少
least 8 characters long. Enabling this feature 8位。
automatically changes the default minimum
默认禁用。
password length to 8 characters
Enforce strong password - This option is disabled
by default.
TPM Security Enables or disables the trusted platform module 启用或禁用TPM模块。
(TPM) security.
可以选择的设置项：不激活、
You can set the TPM security to: 激活、清除TPM信息
Deactivate
(default)
Activate
Clear
NOTE: When TPM Security is set to "；Clear"；, the
system setup program clears the owner information
stored in the TPM. Use this setting to restore the
TPM to its default state if you lose or forget the
owner authentication data.
CPU XD Support Enables or disables the execute disable mode of the 启用或禁用CPU数据执行保护
processor.
默认启用。
This option is enabled by default.
Enables or disables the optional Computrace®；； 激活/不激活/关闭&ldquo；丢
service designed for asset management. 失追踪功能&rdquo；。需要专
业软件支持。(国内一般不提供
You can set this option to:
该功能。）
Deactivate (default)
Disable
Activate
Computrace(R)
默认：不激活。
Chassis Intrusion This field controls the chassis intrusion feature. 开箱提示设置选项：
开箱提示 You can set this option to:
Clear Intrusion Warning (Enabled by default
if detected the chassis intrusion)
Disable
Enabled
On-Silent (Enabled by default if detected
the chassis intrusion)
Clear Intrusion
Warning (默认启用开
箱动作清除警告信息。)
禁用
启用
安静模式 (默认启用安
静模式，开箱动作不警
告)
SATA-0 Password Displays the current status of the password set for SATA-0 控制器 硬盘密码信
the hard drive connected to the SATA-0 connector 息。
on the system board.
You can also set a new password. This option is not
set by default.
NOTE: The system setup program displays a password
for each of the hard drives connected to your
system board.
SATA-1 Password Displays the current status of the password set for SATA-1 控制器 硬盘密码信
the hard drive connected to the SATA-1 connector 息。
on the system board.
You can also set a new password. This option is not
set by default.
NOTE: The system setup program displays a password
for each of the hard drives connected to your
system board.
Power Management
AC Recovery Determines how the system responds when AC power 设置断电后电源重新连接的系
is re-applied after a power loss. You can set the 统状态
AC Recovery to:
关机(默认)
Power Off (default)
开机
Power On
保持上次状态
Last State
Auto On Time
唤醒时间
Sets time to automatically turn on the computer. 该界面可以设置唤醒时间。
Time is kept in the standard 12-hour format
(hours:minutes:seconds).
时间以标准的12小时格式设
置。
Change the startup time by typing the values in the 如果将自动开机选项设置为禁
time and AM/PM fields. 用，自动唤醒功能将不能生效。
NOTE: This feature does not work if you turn off 默认关闭唤醒。
your computer using the switch on a power strip or
surge protector or if Auto Power On is set to
disabled.
Low Power Mode
低电模式
Enables or disables low power mode.
This option is enabled by default.
启用或禁用低电模式。
默认启用。
☆ NOTE: ☆ NOTE:
When low power mode is enabled, the integrated 启用低电模式，在系统关
network card is disabled when the system is 机或休眠模式，集成网卡
shutdown or in Hibernate mode. Only Add-in NIC 将被禁用。仅仅独立网卡
cards will be able to remotely wake the 可以被远程唤醒。
system.
Remote Wakeup
远程唤醒
Allows the system to power up when a network 该项可以设置是否可以通过网
interface controller receives a wake up signal. 卡唤醒。
You can set Remote Wakeup to:
禁用 (默认设置)
Disable (default)
启用
Enable
Enable with Boot NIC
启用网卡启动。
Suspend Mode
待机模式
Sets the power management suspend mode to:
S3 (default)
S1
设置电源管理待机模式：
S3 (默认)
S1
Fan Control
Override
风扇优先控制
Controls the speed of the system fan.
This option is disabled by default.
控制系统风扇速度。
默认禁用该项。
NOTE: When enabled, the fan runs at full speed. 如果启用，风扇将全速运行。
Maintenance
Service Tag
Asset Tag
Displays the Service Tag of your computer. 查看服务编号
Allows you to create a system asset tag if an asset 设置资产编号
tag is not already set.
This option is not set by default.
SERR Messages Controls the SERR Message mechanism.
This option is enabled by default.
Some graphics cards require the SERR Message
mechanism be disabled.
控制SERR信息。
默认启用。
有些显卡需要禁用SERR信息。
Image Server 服务器镜像 （该功能目前只在美国销售）
Lookup Method
查找方式
Static IP
DNS
Specifies how the ImageServerlooksup the server 设置镜像服务器查找服务器地
address. 址的方式。
静态 IP
DNS
NOTE: This field is only relevant when the "；该项仅仅在“系统配置”选项
Integrated NIC"； control in the "；System 中下的“集成网卡”子项下启
Configuration"； group is set to "；Enabled with 用Image Server才可以设置。
ImageServer"；
ImageServer IP
镜像服务器IP
Specifies the primary static IP address of the 设置静态IP地址。
ImageServer with which the client software
默认IP地址：
communicates.
255.255.255.255
The default IP address is 255.255.255.255
该项仅仅在“系统配置”选项
NOTE: This field is only relevant when the "；中下的“集成网卡”子项下启
Integrated NIC"； control in the "；System 用Image Server才可以设置，
Configuration"； group is set to "；Enabled with 且查找模式必须设置为静态
ImageServer"； and when "；Lookup Method"； is set IP。
to "；Static IP"；.
ImageServer Port Specifies the primary IP port of the image server 设置镜像服务器的主IP端口。
with which the client software communicates.
镜像服务器端口 默认端口是：06910
The default IP port is 06910.
该项仅仅在“系统配置”选项
NOTE: This field is only relevant when the "；中下的“集成网卡”子项下启
Integrated NIC"； control in the "；System 用Image Server才可以设置。
Configuration"； group is set to "；Enabled with
ImageServer"；
Client DHCP
DHCP客户端
Specifies how the client obtains the IP address. 设置客户端获取IP地址的方
式。
Static IP
DHCP (default)
静态 IP
DHCP (默认设置）
NOTE: This field is only relevant when the "；
Integrated NIC"； control in the "；System 该项仅仅在“系统配置”选项
Configuration"； group is set to "；Enabled with 中下的“集成网卡”子项下启
ImageServer"； 用Image Server才可以设置。
Specifies the static IP address of the client. 设置客户端静态IP地址。
The default IP address is 255.255.255.255 默认IP地址：
255.255.255.255
Client IP
NOTE: This field is only relevant when the "；
Integrated NIC"； control in the "；System 该项仅仅在“系统配置”选项
Configuration"； group is set to "；Enabled with 中下的“集成网卡”子项下启
ImageServer"； and when "；Client DHCP"； is set 用Image Server才可以设置，
to "；Static IP"；. 且DHCP客户端必须设置为静
态IP。
Client SubnetMask Specifies the subnet mask for the client.
客户端子网掩码 The default setting is 255.255.255.255
设置客户端子网掩码。
默认设置：255.255.255.255
NOTE: This field is only relevant when the "；该项仅仅在“系统配置”选项
Integrated NIC"； control in the "；System 中下的“集成网卡”子项下启
Configuration"； group is set to "；Enabled with 用Image Server才可以设置，
ImageServer"； and when "；Client DHCP"； is set 且DHCP客户端必须设置为静
to "；Static IP"；. 态IP。
Client Gateway
客户端网关
Specifies the gateway IP address for the client. 设置客户端网关IP地址。
The default setting is 255.255.255.255 默认设置：255.255.255.255
NOTE: This field is only relevant when the "；该项仅仅在“系统配置”选项
Integrated NIC"； control in the "；System 中下的“集成网卡”子项下启
Configuration"； group is set to "；Enabled with 用Image Server才可以设置，
ImageServer"； and when "；Client DHCP"； is set 且DHCP客户端必须设置为静
to "；Static IP"；. 态IP。
License Status Displays the current license status.
Post Behavior 启动相关
Fast Boot
快速启动
NumLock LED
数字灯
When enabled (default), this option activates the
numeric and mathematical features shown at the top
of each key. When disabled, this option activates
the cursor-control functions labeled on the bottom
When enabled (default), your computer starts more 启用快速启动，计算机将跳过
quickly because it skips certain configurations 有关配置和测试，执行快速启
and tests. 动。
Enables or disables the NumLock feature when your 在系统启动时启用或禁用数字
computer starts. 锁定灯。
显示当前认证状态。
of each key
POST Hotkeys
POST 热键
Allows you to specify the function keys to display 在系统启动时，功能键显示在
on the screen when the computer starts. 屏幕上。
Enable F2 = Setup
(enabled by default)
Enable F2 = Setup
默认设置 （有些机器没
有该项选择）
Enable F12 = Boot menu (enabled by default)
Enable F12 = Boot
menu默认设置
Keyboard Errors Enables or disables keyboard error reporting when 启用或禁用在系统启动是的键
the computer starts. 盘错误报告。
This option is enabled by default. 默认启用。
MEBx Hotkey
MEBX 热键
sign-on displays a message stating the keyrtroke
sequence required to enter the Manageability
Engine BIOS Extensions(MEBx) Setup program. 默认启用。
This option is enabled by default.
System Logs
BIOS Events Displays the system event log and allows you to: 显示系统事件记录。
Clear Log
清除记录
Mark all Entries
记录所有事件
2024年3月19日发(作者：迮昕昕)
Optiplex常见机型最新BIOS中英文对照表
（有些项目为机器可选配置）
General 常规信息
System Board Displays the following information:
System information: Displays BIOS Version,
Service Tag,Express Service Code,Asset
Tag, Manufacture Date, and the Ownership
Date.
Memory information: Displays Installed
Memory, Memory Speed, Number of Active
Channels, Memory Technology,DIMM_1
Size,DIMM_2 Size.
Processor information: Displays the
Processor Type, Processor Speed, Processor
Bus Speed, Processor L2 cache, Processor
ID, Microcode Version, Multi Core Capable
and HT Capable 64-bit Technology.
Slot Information: Displays available slots
on the system board.
该项目显示以下详细信息：
系统信息： BIOS 版本,
机器服务编号, 快速服
务代码, 资产编号, 出
厂日期,Ownership日
期.
内存信息: 安装内存容
量；可用内存容量；当
前内存频率；Memory通
道； Memory技术；
DIMM_1容量；DIMM _2
容量
CPU 信息: CPU型号；
CPU频率；CPU 总线 频
率；CPU 2级缓存；CPU
ID ；处理器代码版本；
多核数；HT 64位技术。
插槽信息: 显示主板可
用插槽信息。
Date/Time Displays the system date and time. Changes to the 显示当前的日期和时间。
system date and time take effect immediately.
Drives
Diskette drive
软驱设备
This field determines how the BIOS configures 该项可以设置软驱。
floppy drives, Operating Systems with USB support
禁用 - 禁用所有软驱。
will recognize USB Floppy drives regardless of
启用 - 启用所有软驱。
this setting:
Disable - All Floppy drive are disable
Enable - All floppy drive are enable.
☆ NOTE:
The "；USB Controller"； Setup option will
affect floppy operation.
☆ 注意:
The "；USB Controller"；
设置选项也将控制USB软
驱。
SATA Operation
SATA设置
configures the operating mode og the integrated SATA Operation 设置选项：
hard drive controller
禁用，ATA ， AHCI 和 Raid On
RAID Autodetect / AHCI = RAID if signed
默认设置是 Raid On=SATA 设
drives, otherwise AHCI
置支持Raid
RAID Autodetect / ATA= RAID if signed
drives, otherwise ATA
RAID 自动检测 / AHCI
RAID On / ATA= SATA is configured for RAID
= 设置自动检测RAID，
on every boot
如无Raid 即AHCI 模
Legacy = The hard drive controller is
式
configured for legacy mode
RAID 自动检测 / ATA=
设置自动检测RAID，如
☆ NOTE:
无Raid 即ATA 模式
Legacy mode provides for compatibility with
some older operating systsems that do not
support native resources assigned to the
drive controller.
RAID Mode is incompatible with ImageServer.
Please disable RAID mode if enabling Image
Server.
RAID On / ATA= 配置
SATA模式每次开机都
启动Raid。
Legacy = The hard
drive controller is
configured for legacy
mode
Legacy模式提供对一些旧操
作系统的硬盘控制器的兼容模
式。
S.M.A.R.T.
Reporting
This field controls whether hard drive errors for S.M.A.R.T.
integrated drives are reported during system
startup. This technology is part of the SMART(Self
该项可以设置在系统启动时提
Monitoring Analysis and Reporting Technology)
供硬盘错误信息报告。该技术
是S.M.A.R.T.（自我管理分析
specification.
与报告技术）的一部分。
This option is disabled by default.
默认禁用。
Enables or disables the SATA drives connected to 启用或禁用SATA设备连接到
the system board. 主板上。
Specifies the order in which the computer attempts 计算机尝试从以下列表顺序启
to find an operating system from the devices 动：
specified in this list.
软驱
Onboard or USB Floppy
SATA 硬盘
Onboard SATA Hard Drive
Drives
Boot Sequence
Onboard or USB CD-Rom Drive
System Configuration 系统配置
光驱
Integrated NIC Enables or disables the integrated network card. 启用和禁用集成网卡：
You can set the integrated NIC to:
该项可以设置：
Disable
禁用
Enable (default)
启用（默认项目）
Enable with PXE
启用PXE
Enable with ImageSever
启用ImageSever（ 该
功能目前只在美国销
☆ NOTE:
售）
PXE is needed only if intending to boost to
an operating system located on a server, not
if you are bootinng on an OS located on a hard
drive in this system.
USB Controller Enables or disables the integrated USB controller. 启用或禁用集成USB控制器。
You can set the USB controller to:
可设置:
Enable
启用（默认项目）
(default)
默认
不启动
Disable
No boot
☆ NOTE:
Operating systems with USB support will
recognize USB Storage
Parallel Port
并口
Identifies and defines the parallel port settings. 并口设置选项：
You can set the parallel port to:
禁用
Disable
AT
AT
PS/2 (默认选项)
PS/2 (default)
EPP
EPP
ECP No DMA
ECP No DMA
ECP DMA 1
ECP DMA 1
ECP DMA 3
ECP DMA 3
Sets the base I/O address of the integrated
parallel port.
设置集成并口I/O地址。 Parallel Port
Address
Serial Port #1 Identifies and defines the serial port settings. 串口设置选项：
You can set the serial port to:
禁用，
Disable
自动 (默认选项)
Auto
(default)
COM1
COM3
COM1，
COM3，
☆ NOTE:
The Operating System may allocate resources
even though the setting is disabled.
Miscellaneous
Devices
多种设备设置
Enables or disables the following onboard devices: 启用或禁用下面设备：
Front USB
PCI slots
Audio
OptiPlex ON Reader
Rear Quad USB
PCI Slots
WiFi NIC Slot
Video 显示设置
前置USB
PCI插槽
声卡
OptiPlex ON Reader
后置 USB
无线网卡插槽
Primary Video This field determines which video controller will 该页面可以设置当系统连接2
become the primary video controller when 2 块显卡时，哪一个为主显示。
controllers are available in the system. This
自动(默认选项) - 使
selection matters only if there are 2 video
用连接的独立显卡。
controller present.
主板/PEG - 不接独立
Auto(default) - Use the add-in video 显卡时，将识别集成显
controller. 卡，当 PCI Express
Onboard/PEG - Use the integrated video Graphic(PEG) 显卡连
controller unless a Graphic care is 接时禁用集成显卡。
installed. A PCI Express Graphic(PEG) card
will override and disable the integrated
video controller.
Performance 性能设置
Multi Core
Support
多核支持
This field specifies whether the processor will 该项是否启用1个或所有CPU
have one or all cores enable. The performance of 的核数。
some application will improve with the additional
增加CPU核数，将提供很多程
cores.
序的性能。
This option is enabled by default.
默认启用。
This option enables or disables the 该项启用或禁用超线程技术。
Hyper-Threading Technology. When disabled, only 当禁用，仅仅单线程工作。
one thread per enabled core is enabled
默认启用。
This option is enabled by default.
Hyper-Threading
Technology
超线程技术
Intel®；； Turbo This option enables or disables the Intel®；； Turbo 启用或禁用Intel
Boost Technology Boost Technology. When disabled, Intel®；； Turbo TurboBoost。
Boost Technology allows processor(s) to run at
frequencies higher than the advertised frequency
禁用该项，Intel TurboBoost
允许CPU工作在比标称频率高
This option is enabled by default. 的频率允许。
默认是启用。
Intel®；；
SpeedStep™；；
This option enables or disables the Intel®；； 启用或禁用CPU性能模式。
SpeedStep™；； mode of the processor. When
disabled, the system is placed into the highest
禁用该项，系统将始终工作在
performance state and the Intel®；； SpeedStep™；； 最高的性能状态。系统将不能
applet or native operating system driver are 自动调节CPU的性能。
prevented from adjusting the processor's
启用SpeedStep
performance. When enable. the Intel®；；
SpeedStep™；；, enabled CPU is allowed to operate
默认是启用。
in multiple performance states.
This option is enbaled by default.
C stated Control This option enables or disables additional 启用或禁用额外的CPU的休眠
processor sleep states. The operating system may 状态。当CPU闲置时，操作系
optionally use these for additional power savings 统可随意将额外的CPU进入休
when idle. 眠以节能。
This option is enabled by default. 默认是启用。
Limit CPUID Value This field limits the maximum value the processor 该项目可限制CPU标准的
Standard CPUID Function will support. Some CPUID可支持的 最大量。有些
operating systems will not complete installation 操作系统在CPUID最大量支持
when the maximum CPUID Function supported is 超过3时，将无法正常安装。
greater than 3.
默认是禁用。
This option is disabled by default.
Virtualization Support 虚拟化支持
Virtualization
虚拟化
This Option specifies whether a Virtual Machine
该界面设置：虚拟计算机是否
Monitor (VMM) can utilize the additional hardware
可以利用额外的硬件兼容性提
capabilities provided by Intel®；； Virtualization
供Intel 虚拟化技术。
Technology.
点击复选框，启用或禁用虚拟
Enable Intel®；； Virtualization Technology - This 化技术
option is enabled by default.
默认：启用
VT for Direct I/O Enables or disables the Virtual Machine Monitor 该界面设置：虚拟计算机是否
(VMM) from utilizing the additional hardware 可以利用额外的硬件兼容性提
capabilities provided by Intel®；； Virtulization 供Direct I/O的Intel 虚拟
technology for direct I/O. 化技术。
Enable Intel®；； Virtualization Technology for 点击复选框，启用或禁用
Direct I/O - This option is disabled by default. Direct I/O的虚拟化技术。
默认：禁用
Trusted Execution This field specifies whether a Measured Virtual 该页面确认是否启用安全执行
Machine(MVMM) can utilize the additional hardware 功能。TPM ，虚拟化技术，
capabilities provided by Intel®；； Trusted Direct I/O的虚拟化技术都必
Execution Technology. The TPM Virtualization 须启用Trusted Execution功
Technology and Virtualization Technology for 能。
Direct I/O must be enable to use this feature.
默认：禁用
Enable Intel®；； Trusted Execution Technology -
This option is disabled by default.
Security 安全设置
Administrative
Password
Provides restricted access to the computer's Admin 密码是对BIOS进行修
system setup program in the same way that access 改的权限。
to the system can be restricted with the System
Password option.
This option is not set by default.
System Password
默认没有设置。
Displays the current status of the system's 系统密码是BIOS开机的密码。
password security feature and allows a new system
默认没有设置。
password to be assigned and verified.
This option is not set by default.
Password Changes Enables or disables the user from changing the 在没有Admin密码时，启用或
system password without the administrative 禁用修改系统密码。
password.
默认启用修改系统密码。
This option is enabled by default.
Admin Setup
Lockout
Admin锁定
Password
Configuration
密码配置
Enables or disables the user from entering Setup 当设置了Admin 密码，将阻止
when an Admin password is set. 其他用户进入BIOS。
This option is disabled by default.
These fields control the minimum and maximum 分别设置Admin或系统密码的
number of characters allowed for Admin and System 最小和最大的字符数设置。
passwords. Changes to these fields are not active
until they are committed via the apply button or
saving changes before exiting setup.
Admin Password Min
Admin Password Max
System Password Min
System Password Max
Strong Password
强安全密码
This field enforces strong passwords. If enabled, 启用强大密码功能，所有的密
all passwords must contain at least one uppercase 码设置时必须包括至少一个大
character, one lowercase character, and be at 写字母和一个小写字母，至少
least 8 characters long. Enabling this feature 8位。
automatically changes the default minimum
默认禁用。
password length to 8 characters
Enforce strong password - This option is disabled
by default.
TPM Security Enables or disables the trusted platform module 启用或禁用TPM模块。
(TPM) security.
可以选择的设置项：不激活、
You can set the TPM security to: 激活、清除TPM信息
Deactivate
(default)
Activate
Clear
NOTE: When TPM Security is set to "；Clear"；, the
system setup program clears the owner information
stored in the TPM. Use this setting to restore the
TPM to its default state if you lose or forget the
owner authentication data.
CPU XD Support Enables or disables the execute disable mode of the 启用或禁用CPU数据执行保护
processor.
默认启用。
This option is enabled by default.
Enables or disables the optional Computrace®；； 激活/不激活/关闭&ldquo；丢
service designed for asset management. 失追踪功能&rdquo；。需要专
业软件支持。(国内一般不提供
You can set this option to:
该功能。）
Deactivate (default)
Disable
Activate
Computrace(R)
默认：不激活。
Chassis Intrusion This field controls the chassis intrusion feature. 开箱提示设置选项：
开箱提示 You can set this option to:
Clear Intrusion Warning (Enabled by default
if detected the chassis intrusion)
Disable
Enabled
On-Silent (Enabled by default if detected
the chassis intrusion)
Clear Intrusion
Warning (默认启用开
箱动作清除警告信息。)
禁用
启用
安静模式 (默认启用安
静模式，开箱动作不警
告)
SATA-0 Password Displays the current status of the password set for SATA-0 控制器 硬盘密码信
the hard drive connected to the SATA-0 connector 息。
on the system board.
You can also set a new password. This option is not
set by default.
NOTE: The system setup program displays a password
for each of the hard drives connected to your
system board.
SATA-1 Password Displays the current status of the password set for SATA-1 控制器 硬盘密码信
the hard drive connected to the SATA-1 connector 息。
on the system board.
You can also set a new password. This option is not
set by default.
NOTE: The system setup program displays a password
for each of the hard drives connected to your
system board.
Power Management
AC Recovery Determines how the system responds when AC power 设置断电后电源重新连接的系
is re-applied after a power loss. You can set the 统状态
AC Recovery to:
关机(默认)
Power Off (default)
开机
Power On
保持上次状态
Last State
Auto On Time
唤醒时间
Sets time to automatically turn on the computer. 该界面可以设置唤醒时间。
Time is kept in the standard 12-hour format
(hours:minutes:seconds).
时间以标准的12小时格式设
置。
Change the startup time by typing the values in the 如果将自动开机选项设置为禁
time and AM/PM fields. 用，自动唤醒功能将不能生效。
NOTE: This feature does not work if you turn off 默认关闭唤醒。
your computer using the switch on a power strip or
surge protector or if Auto Power On is set to
disabled.
Low Power Mode
低电模式
Enables or disables low power mode.
This option is enabled by default.
启用或禁用低电模式。
默认启用。
☆ NOTE: ☆ NOTE:
When low power mode is enabled, the integrated 启用低电模式，在系统关
network card is disabled when the system is 机或休眠模式，集成网卡
shutdown or in Hibernate mode. Only Add-in NIC 将被禁用。仅仅独立网卡
cards will be able to remotely wake the 可以被远程唤醒。
system.
Remote Wakeup
远程唤醒
Allows the system to power up when a network 该项可以设置是否可以通过网
interface controller receives a wake up signal. 卡唤醒。
You can set Remote Wakeup to:
禁用 (默认设置)
Disable (default)
启用
Enable
Enable with Boot NIC
启用网卡启动。
Suspend Mode
待机模式
Sets the power management suspend mode to:
S3 (default)
S1
设置电源管理待机模式：
S3 (默认)
S1
Fan Control
Override
风扇优先控制
Controls the speed of the system fan.
This option is disabled by default.
控制系统风扇速度。
默认禁用该项。
NOTE: When enabled, the fan runs at full speed. 如果启用，风扇将全速运行。
Maintenance
Service Tag
Asset Tag
Displays the Service Tag of your computer. 查看服务编号
Allows you to create a system asset tag if an asset 设置资产编号
tag is not already set.
This option is not set by default.
SERR Messages Controls the SERR Message mechanism.
This option is enabled by default.
Some graphics cards require the SERR Message
mechanism be disabled.
控制SERR信息。
默认启用。
有些显卡需要禁用SERR信息。
Image Server 服务器镜像 （该功能目前只在美国销售）
Lookup Method
查找方式
Static IP
DNS
Specifies how the ImageServerlooksup the server 设置镜像服务器查找服务器地
address. 址的方式。
静态 IP
DNS
NOTE: This field is only relevant when the "；该项仅仅在“系统配置”选项
Integrated NIC"； control in the "；System 中下的“集成网卡”子项下启
Configuration"； group is set to "；Enabled with 用Image Server才可以设置。
ImageServer"；
ImageServer IP
镜像服务器IP
Specifies the primary static IP address of the 设置静态IP地址。
ImageServer with which the client software
默认IP地址：
communicates.
255.255.255.255
The default IP address is 255.255.255.255
该项仅仅在“系统配置”选项
NOTE: This field is only relevant when the "；中下的“集成网卡”子项下启
Integrated NIC"； control in the "；System 用Image Server才可以设置，
Configuration"； group is set to "；Enabled with 且查找模式必须设置为静态
ImageServer"； and when "；Lookup Method"； is set IP。
to "；Static IP"；.
ImageServer Port Specifies the primary IP port of the image server 设置镜像服务器的主IP端口。
with which the client software communicates.
镜像服务器端口 默认端口是：06910
The default IP port is 06910.
该项仅仅在“系统配置”选项
NOTE: This field is only relevant when the "；中下的“集成网卡”子项下启
Integrated NIC"； control in the "；System 用Image Server才可以设置。
Configuration"； group is set to "；Enabled with
ImageServer"；
Client DHCP
DHCP客户端
Specifies how the client obtains the IP address. 设置客户端获取IP地址的方
式。
Static IP
DHCP (default)
静态 IP
DHCP (默认设置）
NOTE: This field is only relevant when the "；
Integrated NIC"； control in the "；System 该项仅仅在“系统配置”选项
Configuration"； group is set to "；Enabled with 中下的“集成网卡”子项下启
ImageServer"； 用Image Server才可以设置。
Specifies the static IP address of the client. 设置客户端静态IP地址。
The default IP address is 255.255.255.255 默认IP地址：
255.255.255.255
Client IP
NOTE: This field is only relevant when the "；
Integrated NIC"； control in the "；System 该项仅仅在“系统配置”选项
Configuration"； group is set to "；Enabled with 中下的“集成网卡”子项下启
ImageServer"； and when "；Client DHCP"； is set 用Image Server才可以设置，
to "；Static IP"；. 且DHCP客户端必须设置为静
态IP。
Client SubnetMask Specifies the subnet mask for the client.
客户端子网掩码 The default setting is 255.255.255.255
设置客户端子网掩码。
默认设置：255.255.255.255
NOTE: This field is only relevant when the "；该项仅仅在“系统配置”选项
Integrated NIC"； control in the "；System 中下的“集成网卡”子项下启
Configuration"； group is set to "；Enabled with 用Image Server才可以设置，
ImageServer"； and when "；Client DHCP"； is set 且DHCP客户端必须设置为静
to "；Static IP"；. 态IP。
Client Gateway
客户端网关
Specifies the gateway IP address for the client. 设置客户端网关IP地址。
The default setting is 255.255.255.255 默认设置：255.255.255.255
NOTE: This field is only relevant when the "；该项仅仅在“系统配置”选项
Integrated NIC"； control in the "；System 中下的“集成网卡”子项下启
Configuration"； group is set to "；Enabled with 用Image Server才可以设置，
ImageServer"； and when "；Client DHCP"； is set 且DHCP客户端必须设置为静
to "；Static IP"；. 态IP。
License Status Displays the current license status.
Post Behavior 启动相关
Fast Boot
快速启动
NumLock LED
数字灯
When enabled (default), this option activates the
numeric and mathematical features shown at the top
of each key. When disabled, this option activates
the cursor-control functions labeled on the bottom
When enabled (default), your computer starts more 启用快速启动，计算机将跳过
quickly because it skips certain configurations 有关配置和测试，执行快速启
and tests. 动。
Enables or disables the NumLock feature when your 在系统启动时启用或禁用数字
computer starts. 锁定灯。
显示当前认证状态。
of each key
POST Hotkeys
POST 热键
Allows you to specify the function keys to display 在系统启动时，功能键显示在
on the screen when the computer starts. 屏幕上。
Enable F2 = Setup
(enabled by default)
Enable F2 = Setup
默认设置 （有些机器没
有该项选择）
Enable F12 = Boot menu (enabled by default)
Enable F12 = Boot
menu默认设置
Keyboard Errors Enables or disables keyboard error reporting when 启用或禁用在系统启动是的键
the computer starts. 盘错误报告。
This option is enabled by default. 默认启用。
MEBx Hotkey
MEBX 热键
sign-on displays a message stating the keyrtroke
sequence required to enter the Manageability
Engine BIOS Extensions(MEBx) Setup program. 默认启用。
This option is enabled by default.
System Logs
BIOS Events Displays the system event log and allows you to: 显示系统事件记录。
Clear Log
清除记录
Mark all Entries
记录所有事件