hp+integrity+rx2800+i2+server使用手册_产品说明书_配置指南(quickspecs-USB迷|专注于互联网分享

2024年3月29日发(作者：韶梓柔)

QuickSpecs

Overview

HP Integrity rx2800 i2 Server

You are under constant pressure to deliver more with less, even in the face of declining budgets and spending constraints

- while your IT department requires higher performing systems for their more demanding workloads. You need an

affordable UNIX server that you can install quickly and justify easily. The HP Integrity rx2800 i2 Server is the economical

and easy way to boost performance in your mission-critical data center or remote office, compared to the previous 2U

Integrity servers. With compact scaling you can run entry-class UNIX workloads with outstanding performance and

scalability. Out-of-the-box savings lowers your TCO with performance, floor space and energy efficiencies. State-of-the-art

management tools help you simplify administration, ease serviceability, enable remote management, and improve overall

IT staff productivity-and the 2U rx2800 i2 Server integrates seamlessly into existing rack infrastructures.

s Insight Display

2.1 DVD & 8 HDDs

HP Integrity rx2800 i2 Server: Front View

Panel Console (KVM)

1.2x Power Supplies

VGA & USB

3.4x 1G LANs

HP Integrity rx2800 i2 Server: Rear View

232 port

3 LAN

6.6x I/O Slots

DA - 13770 U.S. QuickSpecs — Version 11 — 12-28-2012Page 1

QuickSpecs

Overview

HP Integrity rx2800 i2 Server

HP Integrity rx2800 i2 Server: Inside View

6 system fans7.2 low profile PCIe

[p410i RAID controller under low profile PCIe cards]

Internal USB8.24 DDR3 Memory Modules in four Memory Expansion

Boards

2 Processor Sockets9.8 Hard Drives

2 -ROM or DVD+RW

[ICH10, Gromit XE & RN50 video controller under

PSUs]

IO & SID

2 full-length PCIe cards

[2 half length PCIe under full-length card]

At A Glance

Standard System Features

HP-UX 11i version 3 September 2010 Release

HP p410i SAS RAID Controller integrated on system board. Supports internal RAID 0, 1, 5, and 6. Optional 512MB

Cache/ Super Capacitor kit (AM252A) for RAID 0 and RAID 1; AM252A is required for RAID 5 and RAID 6.

Quad port 10/100/1000Base-TX LAN (with auto speed sensing; RJ 45 connector, Wake On LAN support) integrated

on system board

One 6-slot Memory Expansion Board (AM246A)

Integrity Integrated Lights Out 3 (iLO3) Management Processor and factory installed Integrity iLO3 Advanced Pack

license

Telnet and web console via 10/100/1000Base-TX management LAN (RJ 45 connector)

One RS 232 serial port for general purpose

Factory integration of processors, memory, disk drives, removable media, I/O cards, and HP Universal 10000 G2

series racks.

Rackmountable into 19 inch cabinets-HP Universal 10000 Series G2 racks as well as many third party racks,

including field integration into existing HP System E racks

Optional stand alone pedestal mount

Three year warranty with next business day on site

ENERGY STAR ® certified with 80 Plus Platinum power supplies

NEBS Level 3 Certified (GR-63-CORE, GR-1089-CORE)

DA - 13770 U.S. QuickSpecs — Version 11 — 12-28-2012Page 2

QuickSpecs

Standard Features

Minimum System

Capacities

HP Integrity rx2800 i2 Server

One 64 bit Intel Itanium processor: Either dual core 1.6 GHz/10 MB on-chip L3 cache 9310

processor, or quad core 1.33 GHz/16 MB on-chip L3 cache 9320 processor, or quad core

1.60 GHz/20 MB on-chip L3 cache 9340.

One I/O Riser Board. Choice of PCIe 3-Slot Riser Board with one full-length/full-height x8

speed/x16 connector slot and two half-length/full-height x4 speed/x8 connectors slots; or

PCIe 2-Slot Riser Board with one full-length/full-height x8 speed/x16 connector slot and

one half-length/full-height x8speed/x16connector slots.

4 GB PC3 10600 Registered CAS9 memory module. Note: Memory modules are DIMM

pairs. NOTE: Double Chip Spare is not supported when 2GB DIMMs are installed in the

system.

Six DIMM slots

One hot swap power supply

Maximum Server

Capacities

Two 64 bit Intel Itanium processors: Either dual core 1.6 GHz/10 MB on-chip L3 cache

9310 processor, or quad core 1.33 GHz/16 MB on-chip L3 cache 9320 processor, or quad

core 1.60 GHz/20 MB on-chip L3 cache 9340.

384 GB PC3 10600 Registered CAS9 memory module.

NOTE: Memory modules are DIMM pairs.

NOTE: Double Chip Spare is not supported when 2GB DIMMs are installed in the system.

Twenty-four DIMM slots

Two hot swap power supplies, providing N+N protection for power supplies and power

input

Two I/O Riser Boards. Choice of PCIe 3-Slot Riser Board with one full-length/full-height x8

speed/x16 connector slot and two half-length/full-height x4 speed/x8 connectors slots; or

PCIe 2-Slot Riser Board with one full-length/full-height x8 speed/x16 connector slot and

one half-length/full-height x8speed/x16connector slots.

One internal DVD ROM or DVD+RW drive

Eight internal hot plug Serial Attached SCSI (SAS) disks for up to 7.2 TB

High AvailabilityN+N Hot swap cooling (not available with OFS [Office Friendly Server] system)

One Hot swap power supply standard-optional second hot swap power supply for N+N

protection (two included in OFS systems for reduction of acoustics)

Advanced ECC protected DDR3 memory

Memory double chip spare to overcome single DRAM chip failures.

NOTE: Not supported when 2-GB DIMMs are installed in the system.

Dynamic Processor resilience and deallocation (DPR)

UPS power management

Hot Plug internal disks

Integrated HP p410i SAS RAID Controller integrated on system board. Supports internal

RAID 0, 1, 5, and 6. Optional 512MB Cache/Super Capacitor kit for RAID 0, 1, and 5;

required for Raid 6

Journal file system with HP UX

Auto reboot

HP Serviceguard for HP UX

HP Serviceguard Extension for RAC for HP UX

HP Serviceguard Extension for SAP for HP UX

Serviceguard Manager for HP UX

HP Event Monitoring Service

HA Monitors for HP UX

HA Toolkits for HP UX

HP Mirrordisk/UX

Extended Campus Cluster, HP Metrocluster, and HP Continentalclusters for HP UX

HP System Insight Manager (SIM) for proactive fault management

NEBS Level 3 Certified (GR-63-CORE, GR-1089-CORE)

DA - 13770 U.S. QuickSpecs — Version 11 — 12-28-2012Page 3

QuickSpecs

Standard Features

SecurityTPM (Trusted Platforms Module) option available

Separate LAN for system management

Password protection on console port

Disablement of remote console ports

SSL encryption on web console

HP Integrity rx2800 i2 Server

Manageability-MonitorIntegrity Integrated Lights Out 3 (iLO3) Management Processor and factory installed

Integrity iLO 3 Advanced Pack license

HP System Insight Manager (SIM)

HP Servicecontrol suite for HP-UX servers including tools for system administration, asset

management, and fault management

HP-UX kernel configuration for easy, dynamic kernel parameter changes

Manageability-

Optimize

Process Resource Manager for HP-UX resource management

HP UX Workload Manager for HP-UX workload management based upon service level

objectives

HP OpenView GlancePlus Pack

DA - 13770 U.S. QuickSpecs — Version 11 — 12-28-2012Page 4

QuickSpecs

Configuration

Processor

Configuration

HP Integrity rx2800 i2 Server

The HP Integrity rx2800 i2 is a symmetrical multiprocessing (SMP) server supporting up to two

high performance 64 bit Itanium processors. Processor speeds cannot be mixed within the same

system.

Processor DetailsDual core series 9300 Itanium processors:

Dual-core 1.6-GHz with 10.0-MB Level 3 Cache 9310 processor

Quad core series 9300 Itanium processor:

Quad core 1.33 GHz with 16 MB Level 3 Cache 9320 processor

Quad core 1.60 GHz with 20 MB Level 3 Cache 9340 processor

All processors support:

Level 2 Cache: 512KB Instruction/256 KB Data per core

Level 1 Cache: 32 KB per core; 16KB (I)/16KB (D)

Single bit cache error correction

50 bit physical addressing

64 bit virtual addressing

4 GB maximum page size

Error protection on all major data structures

Intel Hyper Threading

Intel Advanced Thermal Management (Foxton/VFM)

Intel Cache Safe Technology

Memory ConfigurationThe HP Integrity rx2800 i2 supports DDR (double data rate) SyncDRAM (synchronous dynamic

random access memory) DIMMs with ECC and chip spare protection. The HP Integrity rx2800 i2

supports a maximum of twenty-four DIMM slots. The base server comes standard with 6 DIMM

slots (one 6 slot memory riser, AM246A). Up to 18 additional DIMM slots can be added by

ordering up to 3 additional of the optional AM246A 6-slot memory riser. A maximum of 384 GB is

supported (24×16GB DIMMs).

Memory Loading Rules and Performance Guidelines

Memory must be installed in groups of two DIMMs, also known as pairs or modules

Each memory pair must consist of DIMMs of the same type: same capacity/density, same

organization, same number of ranks, and same speed

Memory is ordered in modules (pairs) of 4 GB (2×2GB); 8 GB (2×4GB); 16GB (2x8GB); or

32GB (2x16GB)

Minimum memory is 4 GB (2×2GB).

NOTE: 2GB DIMMs do not support double chip spare. Anytime 2GB DIMMs are installed

in the system, double chip sparing is not supported.

Maximum memory is 384-GB, using twelve (12) 32 GB (2×16GB) memory pairs

Alternate DIMM pairs between memory risers. If both processor sockets are populated,

alternate DIMMs between processors.

For best performance, all DIMM slots should be populated with the same size DIMM.

Supported Memory Options

DA - 13770 U.S. QuickSpecs — Version 11 — 12-28-2012Page 5

QuickSpecs

Configuration

HP Integrity rx2800 i2 Server

DescriptionProduct Number

4-GB chip spare PC3 10600 Registered CAS9 memory module (2×2 GB DIMMs). NOTE: 2GBAM229A

DIMMs do not support double chip spare. Anytime 2GB DIMMs are installed in a system, double chip

spare will not be supported.

8-GB chip spare PC3 10600 Registered CAS9 memory module (2×4 GB DIMMs)AM230A

16-GB chip spare PC3 10600 Registered CAS9 memory module (2x8 GB DIMMs)AM231A

32-GB chip spare PC3 10600 Registered CAS9 memory modeul (2x16 GB DIMMs)AT067A

6-slot Memory DIMM Riser Card. Note: Maximum of three additional (1 in base system)AM246A

supported.

Server Form Factors

and Rack

Configuration

The HP Integrity rx2800 i2 is a 2U server. It comes in 3 form factors: Rack-Optimized, OFS

(Office Friendly Server) and pedestal versions. The rack-optimized and OFS versions have

different base model product numbers; the rack optimized version is AH395A; the OFS version is

AH396A. The pedestal version consists of the rack-optimized version plus the pedestal foot;

AM251A. The pedestal foot allows the server to be deployed in a non-rack environment. Please

note that the OFS version includes the pedestal foot.

The OFS is a pedestal form factor with reduced acoustics for workstation replacement and/or

office environments. Note that the OFS does not support redundant fans. The OFS does support

redundant power in limited configurations; 1 processor and 12 DIMMs, or 2 processors and 8

DIMMs.

In addition, the HP Integrity rx2800 i2 server offers a NEBS Level 3 DC powered option, which

enables equipment operability in network facility environments. NEBS compliance is a

requirement for Telecom Carriers and their Equipment Providers that are seeking to install

equipment in central offices. They view compliance as key to ensuring personnel safety,

protection of property, and operational reliability. There are three distinct certification levels

specified in SR-3580, Network Equipment-Building System (NEBS) Criteria Levels. All carrier-

grade (CG) products released by HP are evaluated to the NEBS Level 3 criteria, which provides

the maximum assurance of equipment operability in network facility environments. The Physical

Components are described in GR-63-CORE, while the Electromagnetic Compatibility (EMC) and

Safety components are described in GR-1089-CORE.

Please note that the pedestal version does not have the reduced acoustics of the OFS version,

because it is based on the rack-optimized version. The pedestal foot is not factory installed; it

comes as a kit that must be assembled on site.

The rack mounted version of the rx2800 i2 is supported in HP 10000 Series G2 cabinets. For

factory integration order the Universal Rack Kit, AM227A, with 0D1 feature code. Sliding mounts

and a cable management arm will be installed with the server in a factory integrated rack.

The HP Integrity rx2800 i2 can be installed in the field with the Universal Rack Kit (AM227A with

B01 feature code). This kit contains the slide mounts, cable management arm, and all other

hardware needed to mount an rx2800 i2 into a 19 inch cabinet.

Refer to the 10000 Series G2 Rack Best Practices Guide for information on rack deployment,

stabilization, and transportation. Go to /go/rackandpower for more information.

DA - 13770 U.S. QuickSpecs — Version 11 — 12-28-2012Page 6

QuickSpecs

Configuration

Non-HP Cabinets

HP Integrity rx2800 i2 Server

For customers who choose to use non HP cabinets, the HP Integrity rx2800 i2 provides simple

options for installation and HP field support. The HP Integrity rx2800 i2 field rack kit (AM227A)

contains adjustable slide rails, allowing the server to be mounted in cabinets that use the four

post EIA mounting system.

Once the server is mounted in a non HP cabinet, it must meet some simple criteria to ensure

that HP field personnel can fully support the rack environment.

Anti Tip-The rack/cabinet must be solidly anchored to the floor both front and rear. This is

usually accomplished by anti tip feet or by direct bolting to the floor.

Air Flow-The HP Integrity rx2800 i2 uses front to back airflow to cool the unit. Thus a

cabinet cannot have a solid front or rear door. Solid doors may have to be removed or

changed to an open perforation pattern.

Cable Strain Relief-A proper method of strain relief must be used. This may force the

elimination of the rear door in some cases.

Front and Rear Access-For proper cooling and ease of service access, HP recommends

32 inches of unobstructed floor space in the front and rear of rack installations. This

recommendation applies to both HP and third party racks and cabinets.

I/O Architecture

HP Integrity rx2800 i2 Supported I/O Cards

I/O Card

Mass Storage Host Bus Adapters

HP1-port 8Gb PCIe FC SR QLogic

HBA

Product

Number

AH400A

Length/

Height

BootSpeed/Maximum

SupportConnectorCards

Yesx8 speed/

connector

Special Notes

Half-

Length/

Low-Profile

or Full-

Height

HP 2-port 8Gb PCIe FC SR QLogicAH401AHalf-

HBALength/

Low-Profile

or Full-

Height

HP PCIe 1-port 8Gb FC SR EmulexAH402AHalf-

HBALength/

Low-Profile

or Full-

Height

HP PCIe 2-port 8Gb FC SR EmulexAH403AHalf-

HBALength/

Low-Profile

or Full-

Height

HP Integrity PCIe 2p P411/256MBAM311AHalf-

SAS ControllerLength/

Low-Profile

or Full-

Height

6 with 2 AM228A IO

Riser Cards

Yesx8 speed/

connector

66 with 2 AM228A IO

Riser Cards

Yesx8 speed/

connector

66 with 2 AM228A IO

Riser Cards

Yesx8 speed/

connector

66 with 2 AM228A IO

Riser Cards

Yesx8 speed/

connector

3Only supported in

Primary PCIe IO Riser

card.

3 with 1 AM228A IO

Riser Card

DA - 13770 U.S. QuickSpecs — Version 11 — 12-28-2012Page 7

QuickSpecs

Configuration

HP Integrity SA 812/1GB PCIe SASAM312A

Controller

Half-

Length/

Low-Profile

or Full-

Height

AM252AN/A

Yes

HP Integrity rx2800 i2 Server

x8 speed/

connector

1Only supported in

Primary PCIe IO Riser

card.

HP rx2800 i2 SA 512MB

Cache/Battery Kit

N/AN/A1Required for RAID 5

and RAID 6

configurations

6 with 2 AM228A IO

Riser Cards

Local Area Network (LAN) Adapters

HP Integrity CN1100E PCIe 2-portAT111A

Converged Network Adapter

Supports FCOE and 10Gb Ethernet

HP Integrity NC552SFP 2P 10GbE

Adapter

AT118A

Half-

Length/

Low-Profile

or Full-

Height

Half-

Length/

Low-Profile

or Full-

Height

Yesx8 speed,

connector

Yesx8 speed,

connector

66 with 2 AM228A IO

Riser Cards

HP Integrity 10GbE -SR 2p PCIe

Adapter

AM225A

HP Integrity 10GbE -LR 2p PCIe

Adapter

HP Integrity 10GbE -CR 2p PCIe

Adapter

HP PCIe 2 port 1000Base T card

HP PCIe 2 port 1000Base SX card

PCIe 4 port HP NC364T Gbit

Adapter

Half-

Length/

Low-Profile

or Full-

Height

AM232AHalf-

Length/

Low-Profile

or Full-

Height

AM233AHalf-

Length/

Low-Profile

or Full-

Height

AD337AHalf-

Length/

Low-Profile

or Full-

Height

AD338AHalf-

Length/

Low-Profile

or Full-

Height

AD339AHalf-

Length/

Low-Profile

or Full-

Height

Half-

Length/LP

or FH

Yesx8 speed/

connector

66 with 2 AM228A IO

Riser Cards

Yesx8 speed/

connector

66 with 2 AM228A IO

Riser Cards

Yesx8 speed/

connector

66 with 2 AM228A IO

Riser Cards

Yesx4 speed/

connector

66 with 2 AM228A IO

Riser Cards

Yesx4 speed/

connector

66 with 2 AM228A IO

Riser Cards

Yesx8 speed/

connector

66 with 2 AM228A IO

Riser Cards

Infiniband Host Channel Adapters

HP Integrity 4X QDR CX-2 PCI-eAT083A

G2 DP HCA

Multi function Cards (Mass Storage/LAN)

Yesx4 speed,

connector

22 with 2 AM228A IO

Riser Cards

DA - 13770 U.S. QuickSpecs — Version 11 — 12-28-2012Page 8

QuickSpecs

Configuration

HP PCIe 2-port 8Gb FibreChannel

and 2-port 1/10Gb Ethernet

Adapter

AT094AHalf-

Length/

Low-Profile

or Full-

Height

AD221AHalf-

Length/Full-

Height

AD222AHalf-

Length/Full-

Height

AD393AHalf-

Length/Full-

Height

AH423AHalf-

Length/Full-

Height

Yes

HP Integrity rx2800 i2 Server

x8 speed,

connector

HP PCIe 1-port 4Gb Fibre Channel

and 1-port 1000BaseT Adapter

HP PCIe 2p 4Gb FC AND 2p

1000BT Adapter

HP PCIe 2p 4Gb FC AND 2p

1000BSX Adapter

Additional Interface Cards

HP Integrity rx2800 i2 2D Graphics

Adapter

Yes

x8 speed/

connector

x8 speed/

connector

x8 speed/

connector

x16 speed/

x16

connector

2Must be installed in a

Full-Height x16

connector slot

Accessory Products

HP Integrity Thin-Client Bundle

NOTE: AB300E includes T5550 Thin-Client console, a 17inch Display and keyboard/mouse.

Displays

HP Compaq LE1711 17-inch LCD Monitor

HP Compaq LE1911 19-inch LCD Monitor

HP Compaq LA2205wg 22-inch Widescreen LCD Monitor

HP Compaq LA2405wg 24-inch Widescreen LCD Monitor

Keyboard

HP USB Standard Keyboard

HP USB OpenVMS Keyboard and Mouse Kit

Mouse

HP USB Optical Scroll Mouse

Product Number

AB300E

EM886AA

EM887AA

NM274AA

NL773AA

DT528A

AB552A

DC172B

DA - 13770 U.S. QuickSpecs — Version 11 — 12-28-2012Page 9

QuickSpecs

Configuration

HP Integrity rx2800 i2 Server

Internal Supported Storage Devices

Device

Internal Disk Drives (Optional - Maximum 8)

72-GB 15K RPM SAS (Serial Attached SCSI) 2.5" Small Form Factor Hot Plug Disk

146-GB 15K RPM SAS (Serial Attached SCSI) 2.5" Small Form Factor Hot Plug Disk

300-GB 10K RPM SAS (Serial Attached SCSI) 2.5" Small Form Factor Hot Plug Disk

300-GB 15K RPM SAS (Serial Attached SCSI) 2.5" Small Form Factor Hot Plug Disk

450-GB 10K RPM SAS (Serial Attached SCSI) 2.5" Small Form Factor Hot Plug Disk

600-GB 10K RPM SAS (Serial Attached SCSI) 2.5" Small Form Factor Hot Plug Disk

900-GB 10K RPM SAS (Serial Attached SCSI) 2.5" Small Form Factor Hot Plug Disk

6G SAS Hot Plug Enterprise Performance Solid State Drives

200-GB 6G SAS (Serial Attached SCSI) SLC 2.5" Small Form Factor Solid State Drive

400-GB 6G SAS (Serial Attached SCSI) SLC 2.5" Small Form Factor Solid State Drive

RAID

HP BL8x0c i2 factory configured RAID 0, requires 1 drive minimum, only 1 drive will be configured.

HP BLx0c i2 factory configured RAID 1, requires 2 identical drives minimum, only 2 drives will be

configured.

HP rx2800 i2 factory configured RAID 5 , requires 3 identical drives minimum, only 3 drives will be

configured.

Removable Media Drive (Optional - Maximum 1)*

HP Slimline DVD-ROM Optical Drive

HP Slimline DVD+RW Optical Drive

Product Number

AD379A

AM302A

AM244A

AT086A

AM316A

AM317A

AT069A

AT088A

AT089A

AM238A

AM239A

AM240A

AM242A

AM243A

Integrated Multi-

function Core I/O

The integrated multi function I/O provides core I/O functionally and includes the management

processor, which provides remote management and high availability monitoring capabilities.

Core I/OTwo 2-port Intel 82575 10/100/1000BaseTX LAN chips with RJ 45 connector-Supports

LAN boot for operating system installation and wake on LAN capability

HP 410i 6Gb SAS RAID Controller, supports up to 8 internal SAS disk drives.

May select factory configured RAID. The maximum of eight disks can be configured for

RAID 0, 1, and 5 in any combination. RAID 0 requires 1 drive, RAID 1 requires two

identical HDDs, and RAID5 requires three identical HDDs. Optional AM252A SA 512MB

Cache/Battery kit is available with RAID configurations; AM252A is required for RAID 5,6

configurations.

Four USB 2.0 style A ports (USB 1.1 compatible); two front port, two rear ports

One general purpose serial port on rear of system

Telnet and web console via 10/100/1000Base-TX management LAN (RJ 45 connector)

Two VGA ports; one front, one rear

DA - 13770 U.S. QuickSpecs — Version 11 — 12-28-2012Page 10

QuickSpecs

Configuration

Integrity Integrated

Lights Out (iLO)

Management

Processor

Functionality

HP Integrity rx2800 i2 Server

Dedicated 10/100/1000Base-TX LAN port for LAN console and embedded web console

access

One RS 232 serial port for local console

Password protected console ports

Console mirroring between all local, modem, LAN, and web consoles

Remote power up and power down control

Configurable remote access control

Event notification to system console-Provides connectivity, information, and support for HP

UX tools (such as STM and EMS) to notify by email, pager and/or HP response centers.

Interface to system monitoring and diagnostic hardware via an internal IC bus

Secure Sockets Layer security on web console

Integrity Integrated Lights Out (iLO3) Advanced Pack. Integrity Lights Out (iLO3)

Advanced Pack provides additional remote management capabilities, including LDAP

directory services, Virtual Media (CD, DVD, and ISO impage) for HP-UX and Windows,

and Integrated Remote Console (Virtual Keyboard, Video, and Mouse) for Windows

The RN50 integrated chip provides basic graphic capabilities. One VGA port is supported,

with optional connection from front or rear of the system.

System Console

Configurations

The HP Integrity rx2800 i2's integrated iLO3 Management Processor provides five methods for

console connections.

SSL secured Web console accessible through the 10/100/1000Base-TX management LAN

Standard telnet connections accessible through the 10/100/1000Base-TX management

LAN

Local VT100 or hpterm terminal, or VT100 or hpterm emulator via local RS 232 serial

connection

Remote VT100 or hpterm terminal, or VT100 or hpterm emulator via external modem

VGA graphics console. Keyboard and mouse connections are provided by USB.

Internal Disk and

Media Drives

The HP Integrity rx2800 i2 supports up to eight internal Serial Attached SCSI (SAS) 2.5

inch hot plug small form factor hard disk drives

An 8 internal port host bus adapter provides 8 ports, 1 port per SAS disk, for point to point

connection from the adapter to the disk. This means that each disk has its own 6 GB link.

The maximum of eight disks can be configured for RAID 0, 1, 5 and 6 in any combination.

RAID 0 requires one drive, RAID 1 requires two identical HDDs, RAID5 requires three

identical HDDs, and RAID 6 requires four identical HDDs. An optional SA 512MB

Cache/Battery kit (AM252A) is available for all RAID options; it is required for RAID 5 and

RAID 6. Factory configuration of a RAID set is available, except for RAID 6. Please see

rx2800 i2 Ordering Menu for details.

Mirrordisk/UX is available for software mirroring on all HDDs in HP UX based systems.

Cables required to connect the internal disk drives to the host bus adapter are shipped

with the system; no need to order separately.

72-GB 15K, 146-GB 10K, 146-GB 15K, 300GB 10K, 300GB 15K, 450GB 10K, 600GB

10K, and 900GB 10K Serial Attached SCSI (SAS) disks are supported.

200-GB and 400-GB 6G Serial Attached SCSI (SAS) solid state drives (SSD) are

supported.

Optical media drives include a slimline DVD-ROM (AM242A) and a slimline DVD+RW

(AM243A).

DA - 13770 U.S. QuickSpecs — Version 11 — 12-28-2012Page 11

QuickSpecs

Configuration

HP Integrity Trusted

Platform Module

HP Integrity rx2800 i2 Server

The rx2800 i2 has an accessory option for an embedded security chip - the Trusted Platforms

Module (TPM) - product number AM237A. HP-UX Trusted Computing Services (HP-UX TCS)

provides software support for the TPM when running HP-UX 11i v3. By providing a low-cost

embedded security chip option (known as a Trusted Platform Module), HP has established a

foundation for strong protection of sensitive information - including cryptographic keys. Built

around industry standards, the Trusted Platform Module (TPM) provides a basis for key storage

by securely generating and storing cryptographic keys. HP-UX 11i TCS takes this a step further

by providing the necessary infrastructure for managing the TPM, as well as integrating it into

select features such as HP-UX Encrypted Volumes and File Systems (EVFS).

Using HP-UX TCS with EVFS:

Using HP-UX TCS to make the unattended boot capability of EVFS more secure is an important

example of how HP-UX TCS can be integrated with other applications to enhance security. For

more information see the "Protecting EVFS Keys with HP-UX TCS" chapter in the "HP-UX

Trusted Computing Services Administrators Guide" available in the HP-UX Trusted Computing

Services section at: /en/

HP Integrity rx2800 i2The HP Integrity rx2800 i2 provides a high level of integrated power protection:

Power Subsystem

N+N redundant hot swap power supplies (AC or DC)

N+N redundant AC or DC power input protection with electrical phase isolation

Power monitoring and control

The HP Integrity rx2800 i2 supports a second hot swap power supply for N+N protection. One

AC power supply is shipped as a standard part of every AC system (AH395A and AH396A) and

is required for correct operation. Two DC power supplies are shipped as a standard part of every

DC system (AT112A). The hot swap design allows for the online replacement of a power supply

when N+N=2 supplies are configured in the server.

The HP Integrity rx2800 i2 provides an independent power input receptacle for each power

supply (c13/C14 type). The independent design provides protection against losing the

connection from a power cord or breaker. The HP Integrity rx2800 i2 power cords should always

be plugged into separate breakers whenever possible.

DA - 13770 U.S. QuickSpecs — Version 11 — 12-28-2012Page 12

QuickSpecs

Services and Support

HP Integrity rx2800 i2 Server

Support Services

HP Technology Services-consultants and support experts to solve your most complex infrastructure problems. We help

keep your business running, no matter what. Boost availability and avoid downtime, trust our expertise to optimize your HP

solution.

HP Care Pack Services: Packaged server and storage services for increased uptime, productivity and ROI

When you buy HP server and storage products and solutions, it's also a good time to think about what levels of support

you may need. Our portfolio of service options reduce deployment and management worries while helping you get the

most out of your server and storage investments. We take a holistic approach to your environment, bridging servers,

blades, storage, software and network infrastructures with our packaged HP Care Pack Services for servers and storage.

HP recommends the following support and Installation services for the Integrity rx2800i2 servers.

Protect your business beyond warranty

When it comes to robustness and reliability, standard computing equipment warranties have matured along with

technology. Good news that can also create problems stemming from depending on standard warranties designed to only

protect against product defects and some downtime causes. Using a standard approach to warranty uplifts, such as HP

Care Pack Services, helps reduce downtime risks and provides operational consistency for mission-critical and standard

business computing.

HP Care Pack Services: Upgrading or extending standard server and storage warranties cost effectively

HP Care Pack Services offer a standard reactive hardware and software support services suite sold separately, or

combined with our Support Plus and Support Plus 24 services. The portfolio also provides a combination of integrated

proactive and reactive services, such as Proactive 24 Service and Critical Service. In addition with HP Proactive Select,

you can acquire the specific proactive constancy and technical services. HP Proactive Select menu offers a broad set of

service options that you can mix and match depending on your specific requirements. Proactive service options include

offers for server, storage, network, SAN device, software, environment and education services.

HP server and storage lifecycle support services offers a full spectrum of customer care-from technology support to

complex migrations to complete managed services. HP Factory Express provides customization, integration and

deployment services for turnkey solutions. HP Education Services offer flexible, comprehensive training on to help your IT

staff get the most out of your server and storage investments. HP Financial solutions extend innovative financing and cost-

effective asset management programs-from purchase to equipment retirement. Depending on a customer's individual

support needs, customers' can choose from three conveniently structured support solutions. The support

recommendations listed below generally apply to the server and the complete system. Options should be covered at the

same service level as the associated installed system.

Choose the right level of support, deployment and professional integration services for your requirements and

expectations:

Learn more: /services/servers and /services/storage

NOTE: Care Pack Services availability may vary by product and country.

HP Care Pack Services are sold by HP and HP Authorized Service Partners:

Services for customers purchasing from HP or an enterprise reseller are quoted using HP order configuration tools.

Customers purchasing from a commercial reseller can find HP Care Pack Services at:

/go/lookuptool

Recommended HP Care Pack Services for optimal satisfaction with your HP

product.

Optimized Care

3-Year HP Proactive 24

DA - 13770 U.S. QuickSpecs — Version 11 — 12-28-2012Page 13

QuickSpecs

Services and Support

HP Integrity rx2800 i2 Server

HP Proactive 24 Service (P24) integrates hardware and software support to help you improve the stability and operational

effectiveness of your IT environment. An HP Account Manager acts as your primary point of contact to ensure that HP

meets your support needs effectively.

P24 provides the maximum value when multiple technologies in the environment (e.g. servers, storage, SAN and the

network), are all covered. It provides an environment-wide view and consistent support of all of these components which

affect stability of your key applications.

Choose P24 when you want to:

enhance operational effectiveness with proactive problem identification and recommendations from HP

partner with technical experts who help coordinate support, provide hands-on assistance, and share knowledge with

your staff

rapidly access support and expertise spanning your environment

obtain personalized services tailored to your business environment and critical success factors

anticipate necessary change - and execute it correctly the first time

efficiently manage infrastructure resources to meet your performance objectives

/V2//

Server Installation

HP will install and configures your server hardware and operating system software, matching your Business objectives and

systems environment to the configuration

/ERC/downloads/

INCLUDED in each package

Insight Remote Support

HP Insight Remote Support software delivers secure remote monitoring and support for your HP Servers and Storage, 24

X 7, so you can spend less time solving problems and more time focused on your business. You can have your systems

remotely monitored for hardware failure using secure technology that's been proven at thousands of companies around

the world. In many cases, you can avoid problems before they occur. Available as part of HP Warranty, Care Pack and

Service Contract offers.

Standard Care

3-Year HP Support Plus 24

For a higher return on your server and storage investment, HP Support Plus 24 provides integrated hardware and software

support services designed specifically for your technology. Available 24x7, this 3-year combined reactive support option

delivers onsite hardware support and over-the-phone software support around-the-clock. Leverage the full strength of HP

Technology Services - customers can trust the services professionals at HP to work collaboratively with them, putting our

strategic and technical know-how to work across their entire infrastructure.

Improve uptime with responsive hardware and software services

Enjoy consistent service coverage across geographically dispersed sites

Update HP software at a predictable cost

Increase customer satisfaction-with no interoperability gaps

/V2//

Server Installation

HP will install and configures your server hardware and operating system software, matching your Business objectives and

systems environment to the configuration

/ERC/downloads/

INCLUDED in each package

DA - 13770 U.S. QuickSpecs — Version 11 — 12-28-2012Page 14

QuickSpecs

Services and Support

HP Integrity rx2800 i2 Server

Insight Remote Support

HP Insight Remote Support software delivers secure remote monitoring and support for your HP Servers and Storage, 24

X 7, so you can spend less time solving problems and more time focused on your business. You can have your systems

remotely monitored for hardware failure using secure technology that's been proven at thousands of companies around

the world. In many cases, you can avoid problems before they occur. Available as part of HP Warranty, Care Pack and

Service Contract offers.

Basic Care

3-Year HP Support Plus 24

For a higher return on your server and storage investment, HP Support Plus 24 provides integrated hardware and software

support services designed specifically for your technology. Available 24x7, this 3-year combined reactive support option

delivers onsite hardware support and over-the-phone software support around-the-clock. Leverage the full strength of HP

Technology Services - customers can trust the services professionals at HP to work collaboratively with them, putting our

strategic and technical know-how to work across their entire infrastructure.

Improve uptime with responsive hardware and software services

Enjoy consistent service coverage across geographically dispersed sites

Update HP software at a predictable cost

Increase customer satisfaction-with no interoperability gaps

/V2//

Server Installation

HP will install and configures your server hardware and operating system software, matching your Business objectives and

systems environment to the configuration

/ERC/downloads/

INCLUDED in each package

Insight Remote Support

HP Insight Remote Support software delivers secure remote monitoring and support for your HP Servers and Storage, 24

X 7, so you can spend less time solving problems and more time focused on your business. You can have your systems

remotely monitored for hardware failure using secure technology that's been proven at thousands of companies around

the world. In many cases, you can avoid problems before they occur. Available as part of HP Warranty, Care Pack and

Service Contract offers.

Related Services

HP Startup Integrity 2-socket Server SVC

The HP Installation and Startup Service for Business Critical Servers is designed for customers who need more than the

hardware installation delivered with the Basic Installation Care Pack. This service provides hardware integration and

racking at your site for the server. It also provides basic operating system configuration, logical volume layout, and RAID

setting of internal server storage, along with configuration of server network settings to establish connectivity with your

network.

Installation and startup by an HP technical specialist

Availability of an HP service specialist to answer basic questions during the delivery of this service

Delivery of the service at a mutually scheduled time convenient to your organization

Verification prior to installation that all service prerequisites are met

HP Proactive Select Service

Provides a flexible way to purchase HP best-in-class consultancy and services. HP Proactive Select services start with a

proactive delivery plan that is developed by an Account Support Manager (ASM) and you together. The proactive delivery

plan will identify your IT goals and critical success factors.

Service benefits

Access to a list of flexible and customizable proactive service activities

DA - 13770 U.S. QuickSpecs — Version 11 — 12-28-2012Page 15

QuickSpecs

Services and Support

HP Integrity rx2800 i2 Server

Choose from a variety of service activities addressing both technology and process needs

Have the ability to change the proactive delivery plan during the review meetings

Enhance your in-house IT team with complementary assistance from HP

Improved time to solution

Reduce business risk and project costs by accessing HP specialists

Simplify IT operational procedures by leveraging HP best practices

Assigned Account Support Manager

Proactive delivery plan and review meeting

Proactive service credits redeemable for specific service activities of your choice

/V2//4AA2-3842ENN

eSupport

HP eSupport is a portfolio of technology-based services that assist you with managing your business environment - from

the desktop to the data center.

Support Portal

The HP support portal provides one-stop access to the information, tools and services you need to manage the daily

operations of your IT environment.

Features include:

Access to self-solve tools (including search technical knowledge base)

Efficient logging and tracking of support cases

Collaboration with other business and IT professionals

Download of patches and drivers

Access to diagnostic tools

Proactive notification of relevant information

Access to certain features of the support portal requires an HP service agreement. To access the support portal, visit:

/support

HP Insight Remote Support software delivers secure remote monitoring and support for your HP Servers and Storage, 24

X 7, so you can spend less time solving problems and more time focused on your business. You can have your systems

remotely monitored for hardware failure using secure technology that's been proven at thousands of companies around

the world. In many cases, you can avoid problems before they occur.

Customer Technical Training

HP Education Services

In today's cost-conscious business environment, IT professionals, developers, consultants and users face an interesting

challenge: how to keep up with the latest technologies and expand important skills while delivering profitable results on

current projects. To help address this challenge, HP offers innovative training solutions that help keep you up-to-date on

virtualization, server, storage, Insight Control, Citrix, Microsoft® and open source/Linux-related topics-while spending less

time away from business-critical activities.

HP Services Awards

HP Technology Services continues to be recognized for service and support excellence by customers, partners, industry

organizations and publications around the world. Recent honors and award reflect our services team's dedications,

technical expertise, professionalism and uncompromising commitment to customer satisfaction.

DA - 13770 U.S. QuickSpecs — Version 11 — 12-28-2012Page 16

QuickSpecs

Services and Support

HP Integrity rx2800 i2 Server

Additional Services Information

To learn more on HP ProLiant servers, HP BladeSystem servers and HP StorageWorks storage products, please contact

your HP sales representative or HP Authorized Channel Partner. Or visit /services/proliant or

/services/bladesystem or /services/storage

DA - 13770 U.S. QuickSpecs — Version 11 — 12-28-2012Page 17

QuickSpecs

Technical Specifications

Server model number rx2800 i2

HP Integrity rx2800 i2 Server

Server product

numbers

HP Integrity rx2800 i2 Rack-Optimized Base Server. Includes 4-port 1GbE

LAN and 8-port SAS controller core I/O, one 6-slot memory DIMM riser card,

and one power supply, Integrity iLO 3 Basic Management and iLO Advanced

Management licenses, supports up to two dual or quad core Itanium

processors. Minimum of one processor and one memory kit must be ordered.

Processor frequencies cannot be mixed within a system. Supports High Line

Power (1200W). Low Line Power (800W) are supported in limited

configurations; only one processor socket and 12 memory DIMM slots, or two

processor sockets and 8 memory DIMM sockets.

HP Integrity rx2800 i2 Office Friendly Base Server. Includes pedestal foot

[AM251A] , 4-port 1GbE LAN and 8-port SAS controller core I/O, one 6-slot

memory DIMM riser card, and two power supplies, Integrity iLO 3 Basic

Management and iLO Advanced Management licenses, supports up to two dual

Itanium processors. Minimum of one processor and one memory kit must be

ordered. Processor frequencies cannot be mixed within a system. Supports

both High Line Power (1200W) and Low Line Power (800W). Low line power

are supported in limited configurations; only one processor socket and 12

memory DIMMs or less; or two processor sockets and 8 memory DIMMs or

less.

HP Integrity rx2800 i2 Carrier-Grade Server with DC Power. Includes 4-port

1GbE LAN and 8-port SAS controller core I/O, one 6-slot memory DIMM riser

card, and two -48Volt DC power supplies; Integrity iLO 3 Basic Management

and iLO Advanced Management licenses; supports up to two dual or quad core

Itanium processors. Minimum of one processor and one memory kit must be

ordered. Processor frequencies cannot be mixed within a system. This system

has met NEBS Level 3 and ETSI Certifications: NEBS NRTL Certified to NEBS

Level-3 Criteria (GR-63-CORE, GR-1089-CORE) and ETSI Certified to EN 300

019, EN 300 386, and EN 300 753.

The following four Factory Express products are not available on the rx2800 i2

carrier-grade server: HA845A1 - 3rd party SW application load; HA846A1 -

VPN access; HA851A1 - CFE; and HA853A1 option 001 to 006 - image setup

services.

Server Form Factor

Please refer to the HP 10000 Series G2 Rack Best Practices Guide for

information on rack deployment, stabilization and transportation

(/go/rackandpower)

Universal Rack Kit. Required with each rack-optimized base server

(AH395A)

Field Rack Kit

Includes rails and cable management arm.

Factory Rack Integration

For factory rack integration, a rack cabinet must appear in the same section of

the order. The slides and cable management arm will be installed with the

server in the rack cabinet when factory rack integration is ordered.

HP rx2800 i2 Pedestal Foot

Racking Support Shelf Kit. Required for all factory racked orders. One shelf kit

is needed for every 10 servers in the rack and one for every gap left between

servers.

NOTE: If the N+N power supply is ordered standalone the power supply will

ship with two cords; one connects the system to the rack PDU and one enables

connection to a wall socket. The cord that connects the system power supply to

AH395A

AH396A

AT112A

AM227A

B01

0D1

AM251A

AB469A

DA - 13770 U.S. QuickSpecs — Version 11 — 12-28-2012Page 18

QuickSpecs

Technical Specifications

HP Integrity rx2800 i2 Server

the PDU has an IEC 13 end, which plugs into the system power supply's IEC 14

socket, and an IEC 14 end, which plugs into the PDU's IEC 13 socket. The

localized cord that connects the system power supply directly to the wall socket

has an IEC 13 end, which plugs into the system power supply's IEC 14 socket,

and a country specific end, which plus into the wall socket. This localized cord

is included at the distribution site.

If the N+N power supply is ordered with the server, the additional cords will be

included.

Supported Processors

for Field Upgrades

NOTE: Processor

frequencies cannot be

mixed within a system.

1.6 GHz Dual core Intel Itanium 9310 Processor (AH397A))

Cache - On chip Level 132-KB (16-KB Instruction/16-KB Data)

Cache - On-Chip Level 2512-KB Instruction/256-KB Data

Cache - On-Chip Level 310-MB

Floating point Coprocessor includedYes

1.33 GHz Quad core Intel Itanium 9320 Processor (AH398A)

Cache - On chip Level 132 KB (16-KB Instruction/16-KB Data)

Cache - On-Chip Level 2512 KB instruction/256 KB Data

Cache - On-Chip Level 316 MB 4MB per core

Floating point Coprocessor includedYes

1.60 GHz Quad core Intel Itanium 9340 Processor (AH399A)

Cache - On chip Level 132 KB (16-KB Instruction/16-KB Data)

Cache - On-Chip Level 2512 KB instruction/256 KB Data

Cache - On-Chip Level 320 MB (5 MB per core)

Floating point Coprocessor includedYes

System MemoryMinimum memory (2 x 2GB DIMMs)

Maximum memory capacity (24x 16GB

DIMMs)

4 GB

384 GB

Internal DisksMaximum disk mechanisms

Maximum disk capacity

7.2 TB

Standard Integrated I/OSerial Attached SCSI (SAS)

10/100/1000Base–TX (RJ 45 connector)

RS-232 serial port (general purpose)

10/100Base-T management port (RJ 45

connector)

VGA graphics

USB

8 ports

4 port

Included

1 front/1 rear

2 front/2 rear

I/O Buses and Slots

(Must select minimum 1

IO Riser Card/maximum

2 IO Riser Cards )

HP rx2800 i2 PCIe 3-Slot Riser Card (One full-length/full-height x8 speed/x16

connector slot, and two half-length/full-height x4 speed/x8 connector slots)

HP rx2800 i2 PCIe 2-Slot Riser Card (One full-length/full-height x8 speed/x16

connector slot, and one half-lenfth/full-height x8 speed/x16connector slot)

AM228A

AM245A

DA - 13770 U.S. QuickSpecs — Version 11 — 12-28-2012Page 19

QuickSpecs

Technical Specifications

Maximum I/O CardsMass Storage

(See supported I/O table

LAN

for product specifics)

Multi-Function (Mass Storage / LAN)

2D Graphics Adapter

HP Integrity rx2800 i2 Server

Electrical

Characteristics

AC Input power

Hot swap Power supplies

Redundant AC power inputs

Maximum input power at High Line (for

maximum processor, memory, disk, DVD, I/O

configurations)

Maximum input power at Low Line (for

maximum processor, memory, disk, DVD, I/O

configurations)

Input Power at Idle (for maximum processor,

memory, disk, DVD, I/O configurations)

Maximum input current

Power factor at full load

DC Input power

Hot swap Power supplies

Redundant DC power inputs

Maximum input power at High Line (for

maximum processor, memory, disk, DVD, I/O

configurations)

Maximum input power at Low Line (for

maximum processor, memory, disk, DVD, I/O

configurations)

Input Power at Idle (for maximum processor,

memory, disk, DVD, I/O configurations)

Maximum input current

Power factor at full load

100-240V 50/60 Hz

1 included, 2nd for N+N

1400W

4,777 BTU/hour

1000W

567W

1,936 BTU/hour

10A @ 100 Vms or 7A @ 200 Vms

0.98 (approximately)

-36VDC to -72 VDC ( -48 VDC nominal)

2 included, 2nd for N+N

1407W

4,800 BTU/hour

1000W

567W

1,936 BTU/hour

<40A @ -36VDC

0.98 (approximately)

Site PreparationSite planning and installation included

NOTE: System is customer installable.

Rack depth (inches/mm)

Rack width (inches/mm)

Rack height (EIA/inches/mm)

Rack weight (kg/lbs) maximum

27.25 in (692 mm)

19 in (482 mm)

2U/ 3.5 in (89 mm)

66 lbs. (30 kg)

DA - 13770 U.S. QuickSpecs — Version 11 — 12-28-2012Page 20

QuickSpecs

Technical Specifications

Environmental

Characteristics

HP Integrity rx2800 i2 Server

Regulatory ModelRSVLA-RC01

Acoustics for Rackmount (operator/bystander)7.0 Bels LwA

at 77° F (25° C)

Acoustics for Office Friendly Version6.0 Bels LwA

Operating Temperature41° to 95° F (5° to 35° C)

(up to 5000 ft/1524 m)*

Non-operating Temperature-40° to 158° F (-40° to 70° C)

Maximum rate of temperature change20° C/hour

Operating relative humidity15% to 80% RH non-condensing

Non-operating relative humidity90% RH at 65 degC non-condensing

Operating altitude above sea level10,000 ft (3,000 m) maximum

Non-operating altitude above sea level15,000 ft (4,600 m) maximum

* Maximum operating temperature range up to 5000 feet. For higher altitudes, de-rate the

maximum temperature by 2°C/1000 feet above 5000 feet.

Regulatory ComplianceRegulatory Model Number

Electromagnetic interference

RSVLA-RC01

Complies with FCC Rules and Regulations, Part

15, as a Class A digital device. Manufacturer's

Declaration to EN55022 Level A, VCCI

Registered, Class 1, Korea RLL, BMSI Taiwan

UL Listed, CSA Certified, TUV GS Mark

compliant with EN 60950 and EN 41003

/en/

Safety

USB迷 | 专注于互联网分享

hp+integrity+rx2800+i2+server使用手册_产品说明书_配置指南(quickspecs

与本文相关的文章

评论列表 (0)