2024年4月24日发(作者：匡振)
Connected to Dynamips VM "R1" (ID 0, type c3600) - Console port
% Please answer 'yes' or 'no'.
Would you like to enter the initial configuration dialog? [yes/no]:
% Please answer 'yes' or 'no'.
Would you like to enter the initial configuration dialog? [yes/no]: no
Press RETURN to get started!
00:00:03: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
00:00:03: %LINK-3-UPDOWN: Interface Serial1/0, changed state to up
00:00:03: %LINK-3-UPDOWN: Interface Serial1/1, changed state to up
00:00:03: %LINK-3-UPDOWN: Interface Serial1/2, changed state to up
00:00:03: %LINK-3-UPDOWN: Interface Serial1/3, changed state to up
00:00:04: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state
to up
00:00:04: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to up
00:00:04: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/1, changed state to up
00:00:04: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/2, changed state to up
00:00:04: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/3, changed state to up
00:00:32: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to
down
00:00:32: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/2, changed state to
down
00:00:32: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/3, changed state to
down
00:11:32: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3620-I-M), Version 12.2(37), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Thu 15-Jun-06 19:17 by pwade
00:11:32: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a cold start
00:11:33: %LINK-5-CHANGED: Interface FastEthernet0/0, changed state to administratively
down
00:11:33: %LINK-5-CHANGED: Interface Serial1/0, changed state to administratively down
00:11:33: %LINK-5-CHANGED: Interface Serial1/1, changed state to administratively down
00:11:33: %LINK-5-CHANGED: Interface Serial1/2, changed state to administratively down
00:11:33: %LINK-5-CHANGED: Interface Serial1/3, changed state to administratively down
00:11:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state
to down
00:11:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/1, changed state to
down
Router>enable
Router#?
Exec commands:
access-enable Create a temporary Access-List entry
access-profile Apply user-profile to interface
access-template Create a temporary Access-List entry
archive manage archive files
bfe For manual emergency modes setting
cd Change current directory
clear Reset functions
clock Manage the system clock
configure Enter configuration mode
connect Open a terminal connection
copy Copy from one file to another
debug Debugging functions (see also 'undebug')
delete Delete a file
dir List files on a filesystem
disable Turn off privileged commands
disconnect Disconnect an existing network connection
enable Turn on privileged commands
erase Erase a filesystem
exit Exit from the EXEC
help Description of the interactive help system
isdn Run an ISDN EXEC command on a BRI interface
Router#configure
Configuring from terminal, memory, or network [terminal]? terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname R1
R1(config)#interface serial 1/1
R1(config-if)#ip address 192.168.1.1 255.255.255.0
R1(config-if)#encapsulation ppp
R1(config-if)#no shutdown
R1(config-if)#
00:19:38: %LINK-3-UPDOWN: Interface Serial1/1, changed state to up
00:23:17: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/1, changed state to up
R1 con0 is now available
Press RETURN to get started.
00:29:36: %SYS-5-CONFIG_I: Configured from console by console
R1>enable
R1#ping 192.168.1.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 24/34/44 ms
R1#ping 192.168.2.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.2.2, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
R1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R1(config)#ip route 192.168.2.0 255.255.255.0 192.168.1.2
R1(config)#show interface s1/1
^
% Invalid input detected at '^' marker.
R1(config)#show interface serial 1/1
^
% Invalid input detected at '^' marker.
R1(config)#end
R1#sho
00:51:26: %SYS-5-CONFIG_I: Configured from console by consolew interface serial 1/1
Serial1/1 is up, line protocol is up
Hardware is M4T
Internet address is 192.168.1.1/24
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation PPP, crc 16, loopback not set
Keepalive set (10 sec)
Restart-Delay is 0 secs
LCP Open
Open: IPCP, CDPCP
Last input 00:00:21, output 00:00:05, output hang never
Last clearing of "show interface" counters 00:32:22
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/1/256 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
Available Bandwidth 1158 kilobits/sec
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
391 packets input, 16209 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
--More--
2024年4月24日发(作者：匡振)
Connected to Dynamips VM "R1" (ID 0, type c3600) - Console port
% Please answer 'yes' or 'no'.
Would you like to enter the initial configuration dialog? [yes/no]:
% Please answer 'yes' or 'no'.
Would you like to enter the initial configuration dialog? [yes/no]: no
Press RETURN to get started!
00:00:03: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
00:00:03: %LINK-3-UPDOWN: Interface Serial1/0, changed state to up
00:00:03: %LINK-3-UPDOWN: Interface Serial1/1, changed state to up
00:00:03: %LINK-3-UPDOWN: Interface Serial1/2, changed state to up
00:00:03: %LINK-3-UPDOWN: Interface Serial1/3, changed state to up
00:00:04: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state
to up
00:00:04: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to up
00:00:04: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/1, changed state to up
00:00:04: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/2, changed state to up
00:00:04: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/3, changed state to up
00:00:32: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to
down
00:00:32: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/2, changed state to
down
00:00:32: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/3, changed state to
down
00:11:32: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3620-I-M), Version 12.2(37), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Thu 15-Jun-06 19:17 by pwade
00:11:32: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a cold start
00:11:33: %LINK-5-CHANGED: Interface FastEthernet0/0, changed state to administratively
down
00:11:33: %LINK-5-CHANGED: Interface Serial1/0, changed state to administratively down
00:11:33: %LINK-5-CHANGED: Interface Serial1/1, changed state to administratively down
00:11:33: %LINK-5-CHANGED: Interface Serial1/2, changed state to administratively down
00:11:33: %LINK-5-CHANGED: Interface Serial1/3, changed state to administratively down
00:11:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state
to down
00:11:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/1, changed state to
down
Router>enable
Router#?
Exec commands:
access-enable Create a temporary Access-List entry
access-profile Apply user-profile to interface
access-template Create a temporary Access-List entry
archive manage archive files
bfe For manual emergency modes setting
cd Change current directory
clear Reset functions
clock Manage the system clock
configure Enter configuration mode
connect Open a terminal connection
copy Copy from one file to another
debug Debugging functions (see also 'undebug')
delete Delete a file
dir List files on a filesystem
disable Turn off privileged commands
disconnect Disconnect an existing network connection
enable Turn on privileged commands
erase Erase a filesystem
exit Exit from the EXEC
help Description of the interactive help system
isdn Run an ISDN EXEC command on a BRI interface
Router#configure
Configuring from terminal, memory, or network [terminal]? terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname R1
R1(config)#interface serial 1/1
R1(config-if)#ip address 192.168.1.1 255.255.255.0
R1(config-if)#encapsulation ppp
R1(config-if)#no shutdown
R1(config-if)#
00:19:38: %LINK-3-UPDOWN: Interface Serial1/1, changed state to up
00:23:17: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/1, changed state to up
R1 con0 is now available
Press RETURN to get started.
00:29:36: %SYS-5-CONFIG_I: Configured from console by console
R1>enable
R1#ping 192.168.1.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 24/34/44 ms
R1#ping 192.168.2.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.2.2, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
R1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R1(config)#ip route 192.168.2.0 255.255.255.0 192.168.1.2
R1(config)#show interface s1/1
^
% Invalid input detected at '^' marker.
R1(config)#show interface serial 1/1
^
% Invalid input detected at '^' marker.
R1(config)#end
R1#sho
00:51:26: %SYS-5-CONFIG_I: Configured from console by consolew interface serial 1/1
Serial1/1 is up, line protocol is up
Hardware is M4T
Internet address is 192.168.1.1/24
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation PPP, crc 16, loopback not set
Keepalive set (10 sec)
Restart-Delay is 0 secs
LCP Open
Open: IPCP, CDPCP
Last input 00:00:21, output 00:00:05, output hang never
Last clearing of "show interface" counters 00:32:22
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/1/256 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
Available Bandwidth 1158 kilobits/sec
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
391 packets input, 16209 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
--More--