2024年4月28日发(作者：璩谷兰)
LCD Messages
The following table provides detail on error messaged that may be
displayed on the system LCD.
NOTE:
If the user presses and holds the ID button for approximately 5
seconds, the LCD will enter the BIOS Progress Code state. This feature
is very useful when troubleshooting a no POST or no video situations.
Cable and Board Presence -
Message Code: x1Axx
Voltages - Message Code:
x12xx
Processors - Message Code:
x14xx
Power Supplies - Message
Code: x16xx
Hard Drives - Message Code:
x18xx
BIOS Progress Codes - Message
Code: N/A
Temperature - Message Code:
x11xx
Fans - Message Code: x13xx
System Memory - Message Code:
x21xx
BIOS - Message Code: x17xx
Miscellaneous - Message Code:
x19xx
BIOS Fatal Error Codes -
Message Code: x20xx
Special Exceptions - Message
Code: x10xx
Cable and Board Presence -
Message Code:
"x1Axx"
Syste
m
MessaExisPhase
MessMinimum Action
Message ge ts When
age Message Comments Required to Remove
String Priorin Event
Code Message from LCD
ity SEL? Can
Occur
PDB power cable to
the planar is Failing device is
E1A1PDBPwrCablPre-P
High missing or bad and reseated/replaced/Yes
0 e ost
system will not repaired.
power on.
PCI risers are not
configured
Failing device is
E1A1PCIRsrConfcorrectly; some Pre-P
High reseated/replaced/Yes
1 ig invalid ost
repaired.
configurations
prevent system
power on.
One or all of the
PCI risers is Failing device is
E1A1PCIRsrMissPre-P
High missing. This reseated/replaced/Yes
2 ing ost
prevents system repaired.
power on.
E1A1SAS cable A is
SAS Cable A Low
4 missing or bad.
E1A1SAS cable B is
SAS Cable B Low
5 missing or bad.
Failing device is
reseated/replaced/Yes Any
repaired.
Failing device is
reseated/replaced/Yes Any
repaired.
Failing device is
E1A1SAS Cable Flex bay SAS cable
Low reseated/replaced/Yes Any
6 FB is missing or bad.
repaired.
Flex bay power Failing device is
E1A1PwrCable
Low cable is missing or reseated/replaced/Yes Any
7 FB
bad. repaired.
PDB control cable
to the planar is Failing device is
High missing or bad and reseated/replaced/Yes Any
system will not repaired.
power on.
Temperature -
Message Code:
"x11xx"
Syste
m
MessaExisPhase
MessMinimum Action
Message ge ts When
age Message Comments Required to Remove
String Priorin Event
Code Message from LCD
ity SEL? Can
Occur
Ambient
temperature has a Temperature
Med reached a point returns to Yes Any
outside of the allowable range.
allowed range.
Memory has exceeded
allowable
AC Cycle or SEL
High temperature and has
clear
been disabled to
prevent damage to
E1A1PDBCtrl
8 Cable
E111Temp
4 Ambient
E111Temp
6 Memory
Yes Any
2024年4月28日发(作者：璩谷兰)
LCD Messages
The following table provides detail on error messaged that may be
displayed on the system LCD.
NOTE:
If the user presses and holds the ID button for approximately 5
seconds, the LCD will enter the BIOS Progress Code state. This feature
is very useful when troubleshooting a no POST or no video situations.
Cable and Board Presence -
Message Code: x1Axx
Voltages - Message Code:
x12xx
Processors - Message Code:
x14xx
Power Supplies - Message
Code: x16xx
Hard Drives - Message Code:
x18xx
BIOS Progress Codes - Message
Code: N/A
Temperature - Message Code:
x11xx
Fans - Message Code: x13xx
System Memory - Message Code:
x21xx
BIOS - Message Code: x17xx
Miscellaneous - Message Code:
x19xx
BIOS Fatal Error Codes -
Message Code: x20xx
Special Exceptions - Message
Code: x10xx
Cable and Board Presence -
Message Code:
"x1Axx"
Syste
m
MessaExisPhase
MessMinimum Action
Message ge ts When
age Message Comments Required to Remove
String Priorin Event
Code Message from LCD
ity SEL? Can
Occur
PDB power cable to
the planar is Failing device is
E1A1PDBPwrCablPre-P
High missing or bad and reseated/replaced/Yes
0 e ost
system will not repaired.
power on.
PCI risers are not
configured
Failing device is
E1A1PCIRsrConfcorrectly; some Pre-P
High reseated/replaced/Yes
1 ig invalid ost
repaired.
configurations
prevent system
power on.
One or all of the
PCI risers is Failing device is
E1A1PCIRsrMissPre-P
High missing. This reseated/replaced/Yes
2 ing ost
prevents system repaired.
power on.
E1A1SAS cable A is
SAS Cable A Low
4 missing or bad.
E1A1SAS cable B is
SAS Cable B Low
5 missing or bad.
Failing device is
reseated/replaced/Yes Any
repaired.
Failing device is
reseated/replaced/Yes Any
repaired.
Failing device is
E1A1SAS Cable Flex bay SAS cable
Low reseated/replaced/Yes Any
6 FB is missing or bad.
repaired.
Flex bay power Failing device is
E1A1PwrCable
Low cable is missing or reseated/replaced/Yes Any
7 FB
bad. repaired.
PDB control cable
to the planar is Failing device is
High missing or bad and reseated/replaced/Yes Any
system will not repaired.
power on.
Temperature -
Message Code:
"x11xx"
Syste
m
MessaExisPhase
MessMinimum Action
Message ge ts When
age Message Comments Required to Remove
String Priorin Event
Code Message from LCD
ity SEL? Can
Occur
Ambient
temperature has a Temperature
Med reached a point returns to Yes Any
outside of the allowable range.
allowed range.
Memory has exceeded
allowable
AC Cycle or SEL
High temperature and has
clear
been disabled to
prevent damage to
E1A1PDBCtrl
8 Cable
E111Temp
4 Ambient
E111Temp
6 Memory
Yes Any