2024年5月18日发(作者：亓官雅彤)
SLLL006A
TUSB3210KBDPDK : Getting Started
This document lists the documents and software intended for use with the keyboard product development kit
(TUSB3210KBDPDK.) The TUSB3210KBDPDK may be used to evaluate the TUSB3210 universal serial
bus micro-controller from Texas Instruments.
What comes in the kit ?
1. Hardware:
a. Evaluation Module for the TUSB3210 (the printed circuit board in this kit.) The evaluation
module is a printed circuit board with a resident TUSB3210 and mini keyboard input pad. The
TUSB3210 can be tested with the resident input keys and via connection to a USB-enabled host.
b. USB cable.
2. Firmware – Object code that is suitable for a keyboard is preloaded on the EPROM.
3. Literature – these also can be found at the following URL: /sc/tusb3210kbdpdk
a. This “Getting Started Letter”
b. The TUSB3210 Keyboard Evaluation Board User’s Guide (SLLU032): This manual includes
hardware overview and requirements, schematic, board layout and description of jumpers and
switches.
What is available to be downloaded from /sc/tusb3210kbdpdk?
1. Firmware – Source code for firmware is available with a software licensing agreement. The
agreement can be made online at the above URL.
2. Literature - Listed below are the documents with an identifying literature number. As an alternative,
one can always go to and perform a search on ‘TUSB3210’ to find all items associated
with this product.
a. The TUSB3210 Data Manual (SLLS466) : This data manual describes TUSB3210 chip features,
functions, and includes a functional block diagram, pin assignments, and ordering information. It
also contains a detailed functional description, electrical specifications, and includes some
application examples.
b. The TUSB2136/TUSB3210 Firmware Debugging Guide (SLLU027A): This debugging user’s
guide describes how to use the TUSB3210 serial interface to debug firmware. It contains sample
“C” code and header files.
c. The TUSB2136/TUSB3210/TUSB5052 USB Firmware Programming Flow 8052 Embedded
(SLLU020A): This programming user’s guide describes 8052 embedded microcontroller features,
USB transfer function, and application firmware programming examples.
d. The VIDs, PIDs, and Firmware: Design Decisions When Using TI USB Device Controllers
(SLLA154): This document discusses how the vendor ID (VID) and product ID (PID) of the USB
device are handled within a system using one of the TI USB device controllers.
e. The TUSB2136/3210 Bootcode Document for USB to General-Purpose Device Controller
(SLLU025A): This document contains pertinent information about the bootcode process, of the
TUSB3210.
3. Support Utilities/Tools:
a. USB I
2
C Header Generator Utility for General Purpose Applications (): This is a
DOS-based utility that facilitates the adding of a header to the object-code for the I
2
C EEPROM.
Note that this utility does not program the EEPROM, it only formats the file so that it can be
programmed via 3
rd
party EEPROM programming hardware.
What is not included or not available for download?
1. Utilities for monitoring USB traffic – any generic utility will work with our device.
2. Compiler - The TUSB3210 is based upon the industry-standard 8052 microcontroller. Since the 8052
is not proprietary, there are several compilers on the market that would be suitable. Some examples are
at , , and
Technical Questions
Contact the product information center (PIC) at (972) 644-5580, 8am-6pm central time.
Rev 1 1
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Amplifiers
Data Converters
DSP
Interface
Logic
Power Mgmt
Microcontrollers
Applications
Audio
Automotive
Broadband
Digital Control
Military
Optical Networking
Security
Telephony
Video & Imaging
Wireless
Mailing Address:Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright 2005, Texas Instruments Incorporated
/audio
/automotive
/broadband
/digitalcontrol
/military
/opticalnetwork
/security
/telephony
/video
/wireless
2024年5月18日发(作者：亓官雅彤)
SLLL006A
TUSB3210KBDPDK : Getting Started
This document lists the documents and software intended for use with the keyboard product development kit
(TUSB3210KBDPDK.) The TUSB3210KBDPDK may be used to evaluate the TUSB3210 universal serial
bus micro-controller from Texas Instruments.
What comes in the kit ?
1. Hardware:
a. Evaluation Module for the TUSB3210 (the printed circuit board in this kit.) The evaluation
module is a printed circuit board with a resident TUSB3210 and mini keyboard input pad. The
TUSB3210 can be tested with the resident input keys and via connection to a USB-enabled host.
b. USB cable.
2. Firmware – Object code that is suitable for a keyboard is preloaded on the EPROM.
3. Literature – these also can be found at the following URL: /sc/tusb3210kbdpdk
a. This “Getting Started Letter”
b. The TUSB3210 Keyboard Evaluation Board User’s Guide (SLLU032): This manual includes
hardware overview and requirements, schematic, board layout and description of jumpers and
switches.
What is available to be downloaded from /sc/tusb3210kbdpdk?
1. Firmware – Source code for firmware is available with a software licensing agreement. The
agreement can be made online at the above URL.
2. Literature - Listed below are the documents with an identifying literature number. As an alternative,
one can always go to and perform a search on ‘TUSB3210’ to find all items associated
with this product.
a. The TUSB3210 Data Manual (SLLS466) : This data manual describes TUSB3210 chip features,
functions, and includes a functional block diagram, pin assignments, and ordering information. It
also contains a detailed functional description, electrical specifications, and includes some
application examples.
b. The TUSB2136/TUSB3210 Firmware Debugging Guide (SLLU027A): This debugging user’s
guide describes how to use the TUSB3210 serial interface to debug firmware. It contains sample
“C” code and header files.
c. The TUSB2136/TUSB3210/TUSB5052 USB Firmware Programming Flow 8052 Embedded
(SLLU020A): This programming user’s guide describes 8052 embedded microcontroller features,
USB transfer function, and application firmware programming examples.
d. The VIDs, PIDs, and Firmware: Design Decisions When Using TI USB Device Controllers
(SLLA154): This document discusses how the vendor ID (VID) and product ID (PID) of the USB
device are handled within a system using one of the TI USB device controllers.
e. The TUSB2136/3210 Bootcode Document for USB to General-Purpose Device Controller
(SLLU025A): This document contains pertinent information about the bootcode process, of the
TUSB3210.
3. Support Utilities/Tools:
a. USB I
2
C Header Generator Utility for General Purpose Applications (): This is a
DOS-based utility that facilitates the adding of a header to the object-code for the I
2
C EEPROM.
Note that this utility does not program the EEPROM, it only formats the file so that it can be
programmed via 3
rd
party EEPROM programming hardware.
What is not included or not available for download?
1. Utilities for monitoring USB traffic – any generic utility will work with our device.
2. Compiler - The TUSB3210 is based upon the industry-standard 8052 microcontroller. Since the 8052
is not proprietary, there are several compilers on the market that would be suitable. Some examples are
at , , and
Technical Questions
Contact the product information center (PIC) at (972) 644-5580, 8am-6pm central time.
Rev 1 1
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Amplifiers
Data Converters
DSP
Interface
Logic
Power Mgmt
Microcontrollers
Applications
Audio
Automotive
Broadband
Digital Control
Military
Optical Networking
Security
Telephony
Video & Imaging
Wireless
Mailing Address:Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright 2005, Texas Instruments Incorporated
/audio
/automotive
/broadband
/digitalcontrol
/military
/opticalnetwork
/security
/telephony
/video
/wireless