2024年5月18日发(作者：东方英媛)
查询TLP350F供应商捷多邦，专业PCB打样工厂，24小时加急出货
TLP350F
TOSHIBA Photocoupler GaAℓAs IRED + Photo IC
TLP350F
Industrial Inverter
Inverter for Air Conditioner
IGBT/Power MOSFET Gate Drive
IH(Induction Heating)
The TOSHIBA TLP350F consists of a GaAℓAs light-emitting diode and
an integrated photodetector.
This unit is an 8-lead DIP package.
The TLP350F is suitable for gate driving IGBTs or power MOSFETs.
Absolute maximum ratings and electrical characteristics are the same as
TLP350technical datasheet.
• Peak output current: I
O
= ±2.5A (max)
• Guaranteed performance over temperature: −40 to 100°C
• Supply current:I
CC
= 2 mA (max)
• Power supply voltage: V
CC
= 15 to 30 V
• Threshold input current : I
FLH
= 5 mA (max)
• Switching time (t
pLH
/t
pHL
) : 500 ns (max)
• Common mode transient immunity: 15 kV/μs
• Isolation voltage: 3750 Vrms
• UL Recognized
: UL1577,File No.E67349
• Option(D4)
VDE Approved : DIN EN 60747-5-2
Maximum Operating Insulation Voltage : 1140V
PK
Highest Permissible Over Voltage
: 6000V
PK
(Note): When an EN60747-5-2 approved type is needed,
Please designate “Option(D4)”
• Construction mechanical rating
2
7
6
5
18
1: NC
2: Anode
3: Cathode
4: NC
5: GND
6: V
O
(output)
7: NC
8: V
CC
Unit: mm
TOSHIBA 11-10C402
Weight: 0.54 g (typ.)
Pin Configuration
(top view)
Creepage distance
Clearance
Insulation thickness
7.62mm pitch
TLP350 type
6.4 mm (min)
6.4 mm (min)
0.4 mm (min)
10.16mm pitch
TLP350F type
8.0 mm (min)
8.0 mm (min)
0.4 mm (min)
3
4
Truth Table
Schematic
Input LED
Tr1 Tr2 Output
H ON ON OFF H
L
OFF OFF ON L
2+
V
F
3−
(Tr1)
I
F
I
CC
8
V
CC
I
O
6
(Tr2)
V
O
5
GND
between pins 8 and 5. (See Note 6)
A 0.1
μ
F bypass capacitor must be connected
1
2007-10-01
TLP350F
RESTRICTIONS ON PRODUCT USE
• The information contained herein is subject to change without notice.
20070701-EN
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break,
cut, crush or dissolve chemically.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
2
2007-10-01
2024年5月18日发(作者：东方英媛)
查询TLP350F供应商捷多邦，专业PCB打样工厂，24小时加急出货
TLP350F
TOSHIBA Photocoupler GaAℓAs IRED + Photo IC
TLP350F
Industrial Inverter
Inverter for Air Conditioner
IGBT/Power MOSFET Gate Drive
IH(Induction Heating)
The TOSHIBA TLP350F consists of a GaAℓAs light-emitting diode and
an integrated photodetector.
This unit is an 8-lead DIP package.
The TLP350F is suitable for gate driving IGBTs or power MOSFETs.
Absolute maximum ratings and electrical characteristics are the same as
TLP350technical datasheet.
• Peak output current: I
O
= ±2.5A (max)
• Guaranteed performance over temperature: −40 to 100°C
• Supply current:I
CC
= 2 mA (max)
• Power supply voltage: V
CC
= 15 to 30 V
• Threshold input current : I
FLH
= 5 mA (max)
• Switching time (t
pLH
/t
pHL
) : 500 ns (max)
• Common mode transient immunity: 15 kV/μs
• Isolation voltage: 3750 Vrms
• UL Recognized
: UL1577,File No.E67349
• Option(D4)
VDE Approved : DIN EN 60747-5-2
Maximum Operating Insulation Voltage : 1140V
PK
Highest Permissible Over Voltage
: 6000V
PK
(Note): When an EN60747-5-2 approved type is needed,
Please designate “Option(D4)”
• Construction mechanical rating
2
7
6
5
18
1: NC
2: Anode
3: Cathode
4: NC
5: GND
6: V
O
(output)
7: NC
8: V
CC
Unit: mm
TOSHIBA 11-10C402
Weight: 0.54 g (typ.)
Pin Configuration
(top view)
Creepage distance
Clearance
Insulation thickness
7.62mm pitch
TLP350 type
6.4 mm (min)
6.4 mm (min)
0.4 mm (min)
10.16mm pitch
TLP350F type
8.0 mm (min)
8.0 mm (min)
0.4 mm (min)
3
4
Truth Table
Schematic
Input LED
Tr1 Tr2 Output
H ON ON OFF H
L
OFF OFF ON L
2+
V
F
3−
(Tr1)
I
F
I
CC
8
V
CC
I
O
6
(Tr2)
V
O
5
GND
between pins 8 and 5. (See Note 6)
A 0.1
μ
F bypass capacitor must be connected
1
2007-10-01
TLP350F
RESTRICTIONS ON PRODUCT USE
• The information contained herein is subject to change without notice.
20070701-EN
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break,
cut, crush or dissolve chemically.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
2
2007-10-01