2024年5月28日发(作者：友凝冬)
Sennheiser Updater
– User Guide for Installation via Mass
Deployment
Installation using Company’s Deployment Server
1. Download installer package for deployment
The installer package (EXE) for deployment of firmware is downloadable from the
Sennheiser’s homepage: /cco/software
2. Deployment instructions for the Sennheiser Updater
1. Download the installation package (Sennheiser_Updater_) to any lo-
cal path
(E.g. C:MySoftwares)
2. Using a Mass deployment tools (e.g. MS SCCM, Tivoli etc…), an IT administrator can
deploy the Sennheiser Updater in an organization.
3. Features available in the Sennheiser Updater are configurable via a config
‘sdfu_fu_’ (included in the downloaded installer package).
Using the configuration file along with installer setup file
One or more entities described in the below table can be supplied in an xml file whose
name can be passed as command line option/argument in the FU_CONFIG property
(while executing Sennheiser Updater application installer setup file). If the name is
not provided then installer will take its default value for FU_CONFIG as “sdfu_fu_op-
”.
Name of the entity Type Description
Default
Value
False
3
15
30
45
5
Value(s) Range
True, False
Secom Administra-
tor to configure a
non-negative inte-
ger
Secom Administra-
tor to configure a
non-negative inte-
ger
ForcedUpgrade
This value will decide
whether the Forced Upgrade
String
option is enabled or disabled
in the Sennheiser Updater.
Integer
Number of times user can
delay Forced Upgrade of con-
nected Sennheiser devices
ForcedUpgrade-
MaxDenyCount
ForcedUpgradeDelay-
TimeInterval1
ForcedUpgradeDelay-
TimeInterval2
ForcedUpgradeDelay-
TimeInterval3
Integer
3 different time interval (in
minutes) options.
The user has to select either
of these to delay the forced
upgrade.
ForcedUpgrade-
PopupWaitTime
AutoUpgradeCheckDu-
ration
ForcedUpgradeAll
This value will specify a time
in minutes for which the
Forced Upgrade popup will
wait for the user’s input. If
no user input is provided
Integer
during this interval and if
the system is idle then all
the connected devices listed
in the popup will be up-
graded.
This value will specify time
interval (in hours) for Senn-
heiser Updater to check for
Integer
any available software up-
grades for the connected
Sennheiser devices (on the
software download server).
If this value is true then any
Sennheiser device be up-
graded to its newest availa-
ble software version.
If this value is false, then the
String
device listed in
ForcedUpgradeHeadsetInfo
section will only get up-
graded to its newest availa-
ble version.
Secom Administra-
tor to configure a
non-negative inte-
ger
8
Secom Administra-
tor to configure a
non-negative inte-
ger
True
True, False
2024年5月28日发(作者：友凝冬)
Sennheiser Updater
– User Guide for Installation via Mass
Deployment
Installation using Company’s Deployment Server
1. Download installer package for deployment
The installer package (EXE) for deployment of firmware is downloadable from the
Sennheiser’s homepage: /cco/software
2. Deployment instructions for the Sennheiser Updater
1. Download the installation package (Sennheiser_Updater_) to any lo-
cal path
(E.g. C:MySoftwares)
2. Using a Mass deployment tools (e.g. MS SCCM, Tivoli etc…), an IT administrator can
deploy the Sennheiser Updater in an organization.
3. Features available in the Sennheiser Updater are configurable via a config
‘sdfu_fu_’ (included in the downloaded installer package).
Using the configuration file along with installer setup file
One or more entities described in the below table can be supplied in an xml file whose
name can be passed as command line option/argument in the FU_CONFIG property
(while executing Sennheiser Updater application installer setup file). If the name is
not provided then installer will take its default value for FU_CONFIG as “sdfu_fu_op-
”.
Name of the entity Type Description
Default
Value
False
3
15
30
45
5
Value(s) Range
True, False
Secom Administra-
tor to configure a
non-negative inte-
ger
Secom Administra-
tor to configure a
non-negative inte-
ger
ForcedUpgrade
This value will decide
whether the Forced Upgrade
String
option is enabled or disabled
in the Sennheiser Updater.
Integer
Number of times user can
delay Forced Upgrade of con-
nected Sennheiser devices
ForcedUpgrade-
MaxDenyCount
ForcedUpgradeDelay-
TimeInterval1
ForcedUpgradeDelay-
TimeInterval2
ForcedUpgradeDelay-
TimeInterval3
Integer
3 different time interval (in
minutes) options.
The user has to select either
of these to delay the forced
upgrade.
ForcedUpgrade-
PopupWaitTime
AutoUpgradeCheckDu-
ration
ForcedUpgradeAll
This value will specify a time
in minutes for which the
Forced Upgrade popup will
wait for the user’s input. If
no user input is provided
Integer
during this interval and if
the system is idle then all
the connected devices listed
in the popup will be up-
graded.
This value will specify time
interval (in hours) for Senn-
heiser Updater to check for
Integer
any available software up-
grades for the connected
Sennheiser devices (on the
software download server).
If this value is true then any
Sennheiser device be up-
graded to its newest availa-
ble software version.
If this value is false, then the
String
device listed in
ForcedUpgradeHeadsetInfo
section will only get up-
graded to its newest availa-
ble version.
Secom Administra-
tor to configure a
non-negative inte-
ger
8
Secom Administra-
tor to configure a
non-negative inte-
ger
True
True, False