2024年5月28日发(作者：毋倩丽)
LED Explanation
Power
On: Power on
Off: Power off
7106508554 REV5.0.0
Installation Guide
5/8/16-Port Gigabit Easy Smart Switch
Link/Act
1000 Mbps (Green)
On: Running at 1000 Mbps
Flashing: Transmitting/receiving data
10/100 Mbps (Yellow)
On: Running at 10/100 Mbps
Flashing: Transmitting/receiving data
Note: For simplicity, we will take TL-SG108E for example throughout this Guide.
Connection
TL-SG108E
Internet
Router
Ethernet Ports (1-8)
WAN PortLAN Port
PCPC
Configuration
The switch is plug and play. To configure the switch, you can use the Web-based
GUI or the configuration utility.
The utility is only supported on Windows now.
Using the Configuration Utility
to /support and search the model number of your
switch. Download the
Easy Smart Configuration Utility from the product
Support web page on your PC.
ress the downloaded file, run the
installation wizard and follow the prompts to install
the Easy Smart Configuration Utility.
Using the Web-based GUI
out the IP address of the switch.
By default, the switch receives an IP addess from a DHCP server (or a router
that functions as a DHCP server) in your network. You can find out this IP
address on the DHCP server.
If the switch cannot receive an IP address from a DHCP server, it uses the
static IP address of 192.168.0.1, with a subnet mask of 255.255.255.0.
ure IP address on your PC to make sure the switch and PC are in the
same subnet.
If the switch uses an IP address assigned by a DHCP server, set your PC to
obtain an IP address automatically from the DHCP server.
If the switch uses 192.168.0.1 as the IP address, configure your PC’s IP
address as
192.168.0.x (”x” ranges from 2 to 254), and subnet mask as
255.255.255.0.
a web browser on your PC, enter the IP address of the switch in the
address bar and press
Enter. Log in with admin as both user name and
password.
Now you can configure the switch using the Web-based GUI. For further
information, refer to the User Guide.
Go to /support, search the model number of your switch,
and you can find this guide on the product Support web page.
Note: If the switch gets a new IP address from the DHCP server, your connection to
the switch will be lost. Enter the new IP address in your browser to access the
switch again.
click the icon on the desktop, and the
utility Home page will display a list of TP-Link
switches on the local network.
4.
Click to find out IP parameters of the switch.
If the switch uses an IP address assigned by a
DHCP server, set your PC to obtain an IP
address automatically from the DHCP server.
If the switch uses 192.168.0.1 as the IP address,
configure your PC’s IP address as 192.168.0.x
(”x” ranges from 2 to 254), and subnet mask as
255.255.255.0.
5.
Double click the switch that you want to configure. Log in with admin as both
user name and password.
Now you can configure the switch using the configuration utility. For further
information, refer to the Easy Smart Configuration Utility User Guide.
Go to /support, search the model number of your switch,
and you can find this guide on the product Support web page.
Specifications
General Specifications
Standard
Protocol
IEEE802.3i, IEEE802.3u, IEEE802.3ab,
IEEE802.3x, IEEE802.1p, IEEE802.1q
CSMA/CD
Ethernet:
10 Mbps (Half Duplex), 20 Mbps (Full Duplex)
Data Transfer Rate
Fast Ethernet:
100 Mbps (Half Duplex), 200 Mbps (Full Duplex)
Gigabit Ethernet:
2000 Mbps (Full Duplex)
10Base-T:
UTP category 3, 4, 5 cable (maximum 100 m)
EIA/TIA-568 100
Ω STP (maximum 100 m)
100Base-TX:
Network Media (Cable)
UTP category 5, 5e cable (maximum 100 m)
EIA/TIA-568 100
Ω STP (maximum 100 m)
1000Base-T:
UTP category 5e cable (maximum 100 m)
EIA/TIA-568 100 Ω STP (maximum 100 m)
Interface
LED indicators
Transfer Method
MAC Address Learning
5/8/16 10/100/1000 Mbps Auto-Negotiation RJ45
Ports
Power, 10/100 Mbps LED, 1000 Mbps LED
Store-and-Forward
Automatically learning, automatically aging
10Base-T: 14881 pps/Port
Frame Forward Rate
100Base-TX: 148810 pps/Port
1000Base-T: 1488095 pps/Port
Wall Mountable
Distance Between
Mounting Holes
Yes
TL-SG105E: 52 mm
TL-SG108E: 110 mm
TL-SG116E: 200 mm
Frequently Asked Questions (FAQ)
Q1. Why is the Power LED not lit?
By default, the Power LED should be lit when the power system is working normally.
If the Power LED is not lit, please try the following:
A1: Make sure the power adapter is connected to the switch with power source
properly.
A2: Make sure the voltage of the power supply meets the requirements of the input
voltage of the switch.
A3: Make sure the power source is ON.
A4: (For TL-SG105E and TL-SG108E) On the LED On/Off configuration page,
check whether the LED status is on. By default, the LED status is on.
Q2. Why is the Link/Act LED not lit while a device is
connected to the corresponding port?
Please try the following:
A1: Make sure that the cable connectors are firmly plugged into the switch and the
device.
A2
: Make sure the connected device is turned on and works normally.
A3: The cable must be less than 100 meters long (328 feet).
A4: (For TL-SG105E and TL-SG108E) On the LED On/Off configuration page,
check whether the LED status is on. By default, the LED status is on.
Environmental and Physical Specifications
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
0 ˚C to 40 ˚C (32 ˚F to 104 ˚F)
-40 ˚C to 70 ˚C (-40 ˚F to 158 ˚F)
10% RH to 90% RH non-condensing
5% RH to 90% RH non-condensing
To ask questions, find answers, and communicate with TP-Link users
or engineers, please visit
to join TP-Link Community.
For technical support, the user guide and other information, please
visit /support, or simply scan the QR code.
If you have any suggestions or needs on the product guides,
welcome to email **********************.cn.
Some models featured in this guide may be unavailable in your country or region. For
local sales information, visit .
Safety Information
Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device.
Do not use damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
Adapter shall be installed near the equipment and shall be easily accessible.
Explanation of the symbols on the product label
DC voltage
Indoor use only
RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic
equipment (WEEE). This means that this product must be handled pursuant to
European directive 2012/19/EU in order to be recycled or dismantled to minimize its
impact on the environment.
User has the choice to give his product to a competent recycling organization or to
the retailer when he buys a new electrical or electronic equipment.
Use only power supplies which are provided by manufacturer and in the origin packing
no
of this product. If you have any questions, please don’t hesitate to contact us.
EU Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and
other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and
(EU)2015/863.
The original EU declaration of conformity may be found at /en/ce.
© 2019 TP-Link
2024年5月28日发(作者：毋倩丽)
LED Explanation
Power
On: Power on
Off: Power off
7106508554 REV5.0.0
Installation Guide
5/8/16-Port Gigabit Easy Smart Switch
Link/Act
1000 Mbps (Green)
On: Running at 1000 Mbps
Flashing: Transmitting/receiving data
10/100 Mbps (Yellow)
On: Running at 10/100 Mbps
Flashing: Transmitting/receiving data
Note: For simplicity, we will take TL-SG108E for example throughout this Guide.
Connection
TL-SG108E
Internet
Router
Ethernet Ports (1-8)
WAN PortLAN Port
PCPC
Configuration
The switch is plug and play. To configure the switch, you can use the Web-based
GUI or the configuration utility.
The utility is only supported on Windows now.
Using the Configuration Utility
to /support and search the model number of your
switch. Download the
Easy Smart Configuration Utility from the product
Support web page on your PC.
ress the downloaded file, run the
installation wizard and follow the prompts to install
the Easy Smart Configuration Utility.
Using the Web-based GUI
out the IP address of the switch.
By default, the switch receives an IP addess from a DHCP server (or a router
that functions as a DHCP server) in your network. You can find out this IP
address on the DHCP server.
If the switch cannot receive an IP address from a DHCP server, it uses the
static IP address of 192.168.0.1, with a subnet mask of 255.255.255.0.
ure IP address on your PC to make sure the switch and PC are in the
same subnet.
If the switch uses an IP address assigned by a DHCP server, set your PC to
obtain an IP address automatically from the DHCP server.
If the switch uses 192.168.0.1 as the IP address, configure your PC’s IP
address as
192.168.0.x (”x” ranges from 2 to 254), and subnet mask as
255.255.255.0.
a web browser on your PC, enter the IP address of the switch in the
address bar and press
Enter. Log in with admin as both user name and
password.
Now you can configure the switch using the Web-based GUI. For further
information, refer to the User Guide.
Go to /support, search the model number of your switch,
and you can find this guide on the product Support web page.
Note: If the switch gets a new IP address from the DHCP server, your connection to
the switch will be lost. Enter the new IP address in your browser to access the
switch again.
click the icon on the desktop, and the
utility Home page will display a list of TP-Link
switches on the local network.
4.
Click to find out IP parameters of the switch.
If the switch uses an IP address assigned by a
DHCP server, set your PC to obtain an IP
address automatically from the DHCP server.
If the switch uses 192.168.0.1 as the IP address,
configure your PC’s IP address as 192.168.0.x
(”x” ranges from 2 to 254), and subnet mask as
255.255.255.0.
5.
Double click the switch that you want to configure. Log in with admin as both
user name and password.
Now you can configure the switch using the configuration utility. For further
information, refer to the Easy Smart Configuration Utility User Guide.
Go to /support, search the model number of your switch,
and you can find this guide on the product Support web page.
Specifications
General Specifications
Standard
Protocol
IEEE802.3i, IEEE802.3u, IEEE802.3ab,
IEEE802.3x, IEEE802.1p, IEEE802.1q
CSMA/CD
Ethernet:
10 Mbps (Half Duplex), 20 Mbps (Full Duplex)
Data Transfer Rate
Fast Ethernet:
100 Mbps (Half Duplex), 200 Mbps (Full Duplex)
Gigabit Ethernet:
2000 Mbps (Full Duplex)
10Base-T:
UTP category 3, 4, 5 cable (maximum 100 m)
EIA/TIA-568 100
Ω STP (maximum 100 m)
100Base-TX:
Network Media (Cable)
UTP category 5, 5e cable (maximum 100 m)
EIA/TIA-568 100
Ω STP (maximum 100 m)
1000Base-T:
UTP category 5e cable (maximum 100 m)
EIA/TIA-568 100 Ω STP (maximum 100 m)
Interface
LED indicators
Transfer Method
MAC Address Learning
5/8/16 10/100/1000 Mbps Auto-Negotiation RJ45
Ports
Power, 10/100 Mbps LED, 1000 Mbps LED
Store-and-Forward
Automatically learning, automatically aging
10Base-T: 14881 pps/Port
Frame Forward Rate
100Base-TX: 148810 pps/Port
1000Base-T: 1488095 pps/Port
Wall Mountable
Distance Between
Mounting Holes
Yes
TL-SG105E: 52 mm
TL-SG108E: 110 mm
TL-SG116E: 200 mm
Frequently Asked Questions (FAQ)
Q1. Why is the Power LED not lit?
By default, the Power LED should be lit when the power system is working normally.
If the Power LED is not lit, please try the following:
A1: Make sure the power adapter is connected to the switch with power source
properly.
A2: Make sure the voltage of the power supply meets the requirements of the input
voltage of the switch.
A3: Make sure the power source is ON.
A4: (For TL-SG105E and TL-SG108E) On the LED On/Off configuration page,
check whether the LED status is on. By default, the LED status is on.
Q2. Why is the Link/Act LED not lit while a device is
connected to the corresponding port?
Please try the following:
A1: Make sure that the cable connectors are firmly plugged into the switch and the
device.
A2
: Make sure the connected device is turned on and works normally.
A3: The cable must be less than 100 meters long (328 feet).
A4: (For TL-SG105E and TL-SG108E) On the LED On/Off configuration page,
check whether the LED status is on. By default, the LED status is on.
Environmental and Physical Specifications
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
0 ˚C to 40 ˚C (32 ˚F to 104 ˚F)
-40 ˚C to 70 ˚C (-40 ˚F to 158 ˚F)
10% RH to 90% RH non-condensing
5% RH to 90% RH non-condensing
To ask questions, find answers, and communicate with TP-Link users
or engineers, please visit
to join TP-Link Community.
For technical support, the user guide and other information, please
visit /support, or simply scan the QR code.
If you have any suggestions or needs on the product guides,
welcome to email **********************.cn.
Some models featured in this guide may be unavailable in your country or region. For
local sales information, visit .
Safety Information
Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device.
Do not use damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
Adapter shall be installed near the equipment and shall be easily accessible.
Explanation of the symbols on the product label
DC voltage
Indoor use only
RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic
equipment (WEEE). This means that this product must be handled pursuant to
European directive 2012/19/EU in order to be recycled or dismantled to minimize its
impact on the environment.
User has the choice to give his product to a competent recycling organization or to
the retailer when he buys a new electrical or electronic equipment.
Use only power supplies which are provided by manufacturer and in the origin packing
no
of this product. If you have any questions, please don’t hesitate to contact us.
EU Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and
other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and
(EU)2015/863.
The original EU declaration of conformity may be found at /en/ce.
© 2019 TP-Link