BC-01 使用说明书-USB迷|专注于互联网分享

2024年6月2日发(作者：庞从筠)

说明书

播放/暂停

通话状态:

接听来电—短按

拒接来电—长按

结束通话—短按

重播上一个电话—双击

使用方法

1.将夹子通过螺帽固定住本产品，确保支架可以灵活旋转

2.接通电源：将产品通过电源线连接汽车内USB充电口（快充模式需要使用高通快充适配器）

3.按压出风口夹子固定至出风口，然后调整好位置并固定螺帽

4.蓝牙使用：

* BC01两边双灯闪烁为蓝牙模式，打开手机蓝牙，找到蓝牙设备BC01;进行连接配对

* BC01显示屏闪烁为FM调频模式，将频率调至与汽车收音机同一频率（FM调频时，将汽车收音机

的频率调整到当地无电台频点，然后再将BC01的频率和汽车收音机频率调节一致）

*配对成功，播放音乐

*当放音乐时如果有杂音请上/下调整频率0.1MHZ

5.无线充电：

*将带无线充电功能的手机放置在支架上与产品贴近即可充电（建议先将蓝牙设置好再放置手机进行

充电）

6.取出手机

触摸开合按键会自动打开支架，然后取出手机

音乐播放状态:

播放—短按

暂停—短按

进入FM调频模式:

进入—长按直到显示屏闪烁

退出—短按

开启/闭合:

开启支架—短按

关闭支架—短按

1. 空调出风口夹子安装方式

安装步骤

1.将螺帽调整到最佳活动状态

特点

1. Qi认证无线充电标准

2.快充支持10W/7.5W/5W，适用于安卓和苹果系统。

3. 无线支架感应：当手机摆放在无线蓝牙支架时，两边的夹臂会自动将手机夹住。

4. 异常感应：当支架上没有手机时，两边的夹臂会自动合拢。

5. 延伸支架可以灵活伸缩调节，可以很好的把手机调整到合适的位置，便于放置

和取出。

6. 全新升级静音设计：使用静音马达，夹臂活动时没有马达噪音。

7. 360°旋转：支持360°角度旋转，便于找到最合适的位置对手机操作和放置取

出

8. 带有过流保护、过热保护、短路保护功能，使用更安全

9. 认证：FCC/CE/ROHS

1. 上一曲/音量减/频道减

2. 下一曲/音量加/频道加

3. TF 卡槽

4. 支架开启/闭合

5. 播放/暂停/接挂电话/FM

6. 麦克风

7. Type-C 充电插口

8. 数码显示屏

9. LED 指示灯

2.输入：将无线充电器和车载

适配器与充电线连接。

3.按下夹子按钮进行固定，然

后调整角度并拧紧固定螺母。

4.放上手机：充电器可以在接

近时感应您的手机，并且将自

动锁紧您的手机和无线充电。

5.取下智能手机

触摸开关按钮，支架自动打

开，然后将手机拿出。

按键功能

蓝牙/TF卡模式:

2.延长支架安装方式

产品参数

产品名称：BC-01

材料：防火 PC+ABS

颜色：黑色

上一曲/音量减/频率减

短按-上一曲

长按—音量减

FM调频模式

短按—频率减

长按—频率快速减

无线充电参数：

输入功率：5V/2A或9V/1.67A

输出功率：10W/7.5W/5W

无线充电距离3-6mm（max）

转换效率：慢充≥70%，快充≥75%

工作频率：110-205KHz

蓝牙参数：

蓝牙版本：5.0

工作频率：2.4G

声道：立体声

FM频道：85-110MHz

蓝牙距离：≤10m

TF卡：最大支持32G

包装清单：

1*BC-01

1*汽车出风口夹子

1*延长支架

1*USB数据线

1*使用说明书

蓝牙/TF卡模式:

短按-下一曲

长按—音量加

下一曲/音量加/频率加

FM调频模式:

短按-频率加

长按—频率快速加

保修服务

本产品自购买之日起十二个月内在正常使用情况下无材料和工艺缺

陷。保修服务需要购买证明。消费者不应试图打开或拆卸设备，否

则可能会造成损坏而导致保修失效。

USER MANUEL

Call Mode:

Answer—Short Touch

Refuse—Long Touch

Hang up—Short Touch

Play/Pause

Replay Call—Double

Music Mode:

Play—Short Touch

Pause—Short Touch

Enter FM Mode:

Enter—Long Touch untill Display Screen Flicker

Exit—Short Touch

Open/Close

Open Bracket—Short Touch

Close Bracket—Short Touch

1. Air outlet clip fixing method

Installation steps

the screw cap to the best active

1. Perv/V-/CH-

status

2. Next/V+/CH+

:Connect the wireless charger and

3. TF Card

car adapter with the charging cord.

4. Open/Close

Must use Qualcomm quick charge

5. Play/Pause/Answer/Hang up/FM

adaptor for fast wireless charging.

6. Microphone

the button of clip to fix, then

7. Type-c Charge port

adjust the angle and tighten the fixed nut.

8. Channel Display Screen

9. LED Indicate

smartphone:The charger can

sense your phone when approach,the

Buttons Functions

clips will automatically grip your phone

2. Extend the bracket fixing method

and wireless charge.

Bluetooth/TF Card Mode:

off smartphone

Short Touch—Previous

Touch the on-off button ,the clips

Long Touch—Volume Down

automatically open,then take your phone

out.

Perv/V-/CH-

FM Mode

Short Touch—Channel Down

Long Touch—Channel Down Fast

Bluetooth/TF Card Mode:

Short Touch—Next Song

Next/V+/CH+

Long Touch—Volume Up

FM Mode:

Short Touch—Channel Up

Long Touch—Channel Up Fast

Instructions

the screw cap to the best active status

supply:Connect the BC-01 Type-C port and car USB port (or charge adabtor)with the Type-C cable.

Note:For fast wireless charging mode must use Qualcomm quick charge adaptor.

the button of clip to fix, then adjust the angle and tighten the fixed nut.

oth function：

*It's bluetooth mode when the two indictor flicker, then turn on smartphone bluetooth function and fund

bluetooth device“BC01”to connect.

*It's FM mode when the display screen flicker, then set the BC01 channel as same as car radio channel(NOTE:

car radio has no local radio program)

*connected successful and enjoy music

*If there is any noise, please set car radio frequency up/down 0.1MHZ

ss charge：

*Smartphone must has wireless charge function

*Put your smartphone on the Bracket. (It's better after BC-01 bluetooth has connected your smartphone)

off smartphone

Touch the open/close button ,the clips automatically open,then take your phone out.

Features:

1. Wireless changing for devices with Qi standard

2. Charging fast at 10W,7.5W and ordinary at 5W,compatible with Apple and Android devices.

3. Wireless charging sensing:when the phone with wireless charge receiver approaches the charger, the two clips will

automatically clip the phone and charge wirelessly.

4. Foreign body detection sensing:when the phone with none of the receiver approaches the charger,the two clips

will also automatically clip the phone,then use it for a phone holder.

5. The clips can extend and reteact flexibly,so easily fix phone to charge or release to use.

6. New upgrade mute design:Using the mute motor,the clips stretch and shrink with no noise.

7. 360°rotation: The handle supports 360°rotation,which enables you to find suitable directions to place your

phone on or get you phone off.

8. Over-current protection,over-heat protection and short-circuit protection.

9. Certification:FCC,CE,ROHS

Product Specification

Product model：BC-01

Material：Fireproof PC+ABS

Color：Black

Wireless charging specification：Bluetooth specification:Package：

input：5V-2A or 9V-1.67ABluetooth Version: 5.01*BC-01

output: 10W/7.5W/5WOperating Frequency: 2.4G1*Clip

Wireless charging Sound Channel: Stereo1*Extended bracket

Distance: 3-6mm(max)FM Channel: 85-110MHz1*Type-C cable

Conversion Efficiency：70%-75%Bluetooth Distance：≤10m1*User manuel

Operating Frequency: 110-205KHzTF card: Maximum support 32G

Warranty

This device is free from defects in material and workmanship under normal use for twelve(12)months commencing

upon the date of purchase. Proof of purchase is required for warranty consumer should never attempt

to open or disassemble the device,and doing so may cause damage that voids your warranty.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be

installed and operated with minimum distance between 20cm the radiator your body: Use

only the supplied antenna.