2024年6月6日发(作者：蒲煜祺)
DELL服务器错误代码汇总
Cable and Board Presence - Message Code: "x1Axx"
Message Message
Code String
Message
Priority
Message Comments
System Phase
Minimum Action Required to Exists
When Event
Remove Message from LCD in SEL?
Can Occur?
is
Yes Pre-Post E1A10 PDBPwrCable High
PDB power cable to the planar is
Failing device
missing or bad and system will
reseated/replaced/repaired.
not power on.
PCI risers are not configured
correctly; some invalid Failing device
configurations prevent system reseated/replaced/repaired.
power on.
One or all of the PCI risers is
Failing device
missing. This prevents system
reseated/replaced/repaired.
power on.
SAS cable A is missing or bad.
SAS cable B is missing or bad.
Failing device
reseated/replaced/repaired.
Failing device
reseated/replaced/repaired.
E1A11 PCIRsrConfig High
is
Yes Pre-Post
E1A12 PCIRsrMissing High
is
Yes Pre-Post
E1A14
E1A15
E1A16
E1A17
SAS Cable A
SAS Cable B
Low
Low
is
is
is
is
Yes
Yes
Yes
Yes
Any
Any
Any
Any
SAS Cable FB Low
PwrCable FB Low
Flex bay SAS cable is missing or Failing device
bad. reseated/replaced/repaired.
Flex bay power cable is missing Failing device
or bad. reseated/replaced/repaired.
PDB control cable to the planar
Failing device
is missing or bad and system will
reseated/replaced/repaired.
not power on.
E1A18 PDBCtrl Cable High
is
Yes Any
Temperature - Message Code: "x11xx"
Message
Code
E1114
Message
String
Temp
Ambient
Temp
Memory
Message
Priority
Med
Message Comments
Minimum Action System Phase
Exists
Required to Remove When Event Can
in SEL?
Message from LCD Occur?
Any
Ambient temperature has a reached a Temperature returns to
Yes
point outside of the allowed range. allowable range.
Memory has exceeded allowable
temperature and has been disabled to AC Cycle or SEL clear
prevent damage to the components.
Yes E1116 High Any
Voltages - Message Code: "x12xx"
Message Message String Message Message Comments Minimum Action Required to Exists System
Code Priority Remove Message from LCD in
SEL?
Phase
When
Event Can
Occur?
Any E1210 CMOSBatt Low
CMOS battery is missing or the
Failing device is
voltage is outside of the allowable Yes
reseated/replaced/repaired.
range.
PERC5I RAID battery charger has
reported to the Server Management
that the battery is either missing, Failing device is
Yes
can't charge the battery (possibly reseated/replaced/repaired.
because of high temperatures), or the
battery is bad.
This is a predictive failure warning
message telling the user that the
PERC5I RAID battery has less then 24 Battery charges to > 24 hours of
Yes
hours of charge left init. We provide sustained charge.
this message as a warning message to
the customer.
1.5 VV voltage regulator has failed.
1.8 VV voltage regulator has failed.
3.3 V voltage regulator has failed.
5 V voltage regulator has failed.
AC Cycle or SEL clear
AC Cycle or SEL clear
AC Cycle or SEL clear
AC Cycle or SEL clear
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
E1211 ROMBBatt Low Any
W1228 ROMBBatt< 24 hr Low Any
E1214
E1215
E1216
E1217
E1218
E1219
E1221
E1222
E1223
E1225
E1226
1.5VPwrGd
1.8VPwrGd
3.3VPwrGd
5VPwrGd
PCIRsr5VPwrGd
High
High
High
High
High
Any
Any
Any
Any
Any
Any
Any
Any
Any
Any
Any
PCI Riser 5 V voltage regulator has
AC Cycle or SEL clear
failed.
Backplane voltage regulator has failed. AC Cycle or SEL clear
Flex Bay voltage regulator power good
AC Cycle or SEL clear
has failed.
VCACHE # voltage regulator has failed. AC Cycle or SEL clear
VRM # voltage regulator has failed. AC Cycle or SEL clear
BackplanePwrGd High
Flex BayPwrGd High
VCACHE #PwrGd High
VRM #PwrGd
ESB 1.5VPwrGd
High
High
ESB 1.5 VV voltage regulator has
AC Cycle or SEL clear
failed.
PCI Riser 1.5 VV voltage regulator has
AC Cycle or SEL clear
failed.
Linear voltage regulator(s) has failed.
Represents status of multiple voltage
AC Cycle or SEL clear
regulators used in the video and LOM
circuitry.
PCIRsr1.5VPwrGd High
E1227 LinearPwrGd High Yes Any
2024年6月6日发(作者：蒲煜祺)
DELL服务器错误代码汇总
Cable and Board Presence - Message Code: "x1Axx"
Message Message
Code String
Message
Priority
Message Comments
System Phase
Minimum Action Required to Exists
When Event
Remove Message from LCD in SEL?
Can Occur?
is
Yes Pre-Post E1A10 PDBPwrCable High
PDB power cable to the planar is
Failing device
missing or bad and system will
reseated/replaced/repaired.
not power on.
PCI risers are not configured
correctly; some invalid Failing device
configurations prevent system reseated/replaced/repaired.
power on.
One or all of the PCI risers is
Failing device
missing. This prevents system
reseated/replaced/repaired.
power on.
SAS cable A is missing or bad.
SAS cable B is missing or bad.
Failing device
reseated/replaced/repaired.
Failing device
reseated/replaced/repaired.
E1A11 PCIRsrConfig High
is
Yes Pre-Post
E1A12 PCIRsrMissing High
is
Yes Pre-Post
E1A14
E1A15
E1A16
E1A17
SAS Cable A
SAS Cable B
Low
Low
is
is
is
is
Yes
Yes
Yes
Yes
Any
Any
Any
Any
SAS Cable FB Low
PwrCable FB Low
Flex bay SAS cable is missing or Failing device
bad. reseated/replaced/repaired.
Flex bay power cable is missing Failing device
or bad. reseated/replaced/repaired.
PDB control cable to the planar
Failing device
is missing or bad and system will
reseated/replaced/repaired.
not power on.
E1A18 PDBCtrl Cable High
is
Yes Any
Temperature - Message Code: "x11xx"
Message
Code
E1114
Message
String
Temp
Ambient
Temp
Memory
Message
Priority
Med
Message Comments
Minimum Action System Phase
Exists
Required to Remove When Event Can
in SEL?
Message from LCD Occur?
Any
Ambient temperature has a reached a Temperature returns to
Yes
point outside of the allowed range. allowable range.
Memory has exceeded allowable
temperature and has been disabled to AC Cycle or SEL clear
prevent damage to the components.
Yes E1116 High Any
Voltages - Message Code: "x12xx"
Message Message String Message Message Comments Minimum Action Required to Exists System
Code Priority Remove Message from LCD in
SEL?
Phase
When
Event Can
Occur?
Any E1210 CMOSBatt Low
CMOS battery is missing or the
Failing device is
voltage is outside of the allowable Yes
reseated/replaced/repaired.
range.
PERC5I RAID battery charger has
reported to the Server Management
that the battery is either missing, Failing device is
Yes
can't charge the battery (possibly reseated/replaced/repaired.
because of high temperatures), or the
battery is bad.
This is a predictive failure warning
message telling the user that the
PERC5I RAID battery has less then 24 Battery charges to > 24 hours of
Yes
hours of charge left init. We provide sustained charge.
this message as a warning message to
the customer.
1.5 VV voltage regulator has failed.
1.8 VV voltage regulator has failed.
3.3 V voltage regulator has failed.
5 V voltage regulator has failed.
AC Cycle or SEL clear
AC Cycle or SEL clear
AC Cycle or SEL clear
AC Cycle or SEL clear
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
E1211 ROMBBatt Low Any
W1228 ROMBBatt< 24 hr Low Any
E1214
E1215
E1216
E1217
E1218
E1219
E1221
E1222
E1223
E1225
E1226
1.5VPwrGd
1.8VPwrGd
3.3VPwrGd
5VPwrGd
PCIRsr5VPwrGd
High
High
High
High
High
Any
Any
Any
Any
Any
Any
Any
Any
Any
Any
Any
PCI Riser 5 V voltage regulator has
AC Cycle or SEL clear
failed.
Backplane voltage regulator has failed. AC Cycle or SEL clear
Flex Bay voltage regulator power good
AC Cycle or SEL clear
has failed.
VCACHE # voltage regulator has failed. AC Cycle or SEL clear
VRM # voltage regulator has failed. AC Cycle or SEL clear
BackplanePwrGd High
Flex BayPwrGd High
VCACHE #PwrGd High
VRM #PwrGd
ESB 1.5VPwrGd
High
High
ESB 1.5 VV voltage regulator has
AC Cycle or SEL clear
failed.
PCI Riser 1.5 VV voltage regulator has
AC Cycle or SEL clear
failed.
Linear voltage regulator(s) has failed.
Represents status of multiple voltage
AC Cycle or SEL clear
regulators used in the video and LOM
circuitry.
PCIRsr1.5VPwrGd High
E1227 LinearPwrGd High Yes Any