2024年6月14日发(作者：接意致)
.
一、清空配置：
用的配置文件信息）然后重启设备，重启设备室提示保存信息，选择“NO”。
Warning: The action will delete the
saved configuration in the configuration will be erased to
reconfigure. Continue? [Y/N]:yWarning: Now clearing the configuration in
the device.
Info: Succeeded in clearing the configuration in the device.
Info: The system is now comparing the configuration, please
wait.
Warning: The configuration has been modified, and it will be saved to
the next startup saved-configuration . Continue?
1 / 20'.
.
[Y/N]:n //此处请选择“N”
Info: If want to reboot with saving diagnostic
information, input 'N' and then execute 'reboot save diagnostic-
information'.
System will reboot! Continue?[Y/N]:y
二、通过STelnet/Telnet登录交换机设置新的Console口登录密码
# 以登录用户界面的认证方式为密码认证，密码为Huawei@123为例，配置如下。
[HUAWEI] user-interface console 0
[HUAWEI-ui-console0] authentication-mode password
[HUAWEI-ui-console0] set authentication password cipher Huawei@123
[HUAWEI-ui-console0] return
2 / 20'.
2024年6月14日发(作者：接意致)
.
一、清空配置：
用的配置文件信息）然后重启设备，重启设备室提示保存信息，选择“NO”。
Warning: The action will delete the
saved configuration in the configuration will be erased to
reconfigure. Continue? [Y/N]:yWarning: Now clearing the configuration in
the device.
Info: Succeeded in clearing the configuration in the device.
Info: The system is now comparing the configuration, please
wait.
Warning: The configuration has been modified, and it will be saved to
the next startup saved-configuration . Continue?
1 / 20'.
.
[Y/N]:n //此处请选择“N”
Info: If want to reboot with saving diagnostic
information, input 'N' and then execute 'reboot save diagnostic-
information'.
System will reboot! Continue?[Y/N]:y
二、通过STelnet/Telnet登录交换机设置新的Console口登录密码
# 以登录用户界面的认证方式为密码认证，密码为Huawei@123为例，配置如下。
[HUAWEI] user-interface console 0
[HUAWEI-ui-console0] authentication-mode password
[HUAWEI-ui-console0] set authentication password cipher Huawei@123
[HUAWEI-ui-console0] return
2 / 20'.