2024年6月15日发(作者：窦晨菲)
1、模拟的方法
模拟的方法很简单，从网上下载pix的IOS（是.bin格式的文件），然后在GNS3的―编辑‖–
>―首选项‖–>‖Qemu‖–>‖PIX‖，在binary image中设置相应IOS文件即可。
[PIX的设置界面]
2. PIX的激活
要完全使用PIX的功能，需要激活PIX，激活方法如下(引用自网络)：
pixfirewall> en
Password:
pixfirewall# sh version
Cisco PIX Security Appliance Software Version 7.2(2)
Compiled on Wed 22-Nov-06 14:16 by builders
System image file is ―Unknown, monitor mode tftp booted image‖
Config file at boot was ―startup-config‖
pixfirewall up 3 mins 23 secs
Hardware: PIX-525, 256 MB RAM, CPU Pentium II 1 MHz
Flash E28F128J3 @ 0xfff00000, 16MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB
0: Ext: Ethernet0 : address is 00, irq 9
1: Ext: Ethernet1 : address is 01, irq 11
2: Ext: Ethernet2 : address is 02, irq 11
3: Ext: Ethernet3 : address is 03, irq 11
4: Ext: Ethernet4 : address is 04, irq 11
The Running Activation Key is not valid, using default settings:
Licensed features for this platform:
Maximum Physical Interfaces : 6
Maximum VLANs : 25
Inside Hosts : Unlimited
Failover : Disabled //Failover 不可用
VPN-DES : Disabled
VPN-3DES-AES : Disabled
Cut-through Proxy : Enabled
Guards : Enabled
URL Filtering : Enabled
Security Contexts : 0
GTP/GPRS : Disabled
VPN Peers : Unlimited
This platform has a Restricted (R) license.
Serial Number: 808102688 //序列号
Running Activation Key: 0×00000000 0×00000000 0×00000000 0×00000000
0×00000000 //激活码
Configuration has not been modified since last system restart.
pixfirewall# activation-key 0xd2390d2c 0x9fc4b36d 0x98442d99 0xeef7d8b1 //输入激活
码
The following features available in flash activation key are NOT
available in new activation key:
Failover is different.
flash activation key: Restricted(R)
2024年6月15日发(作者：窦晨菲)
1、模拟的方法
模拟的方法很简单，从网上下载pix的IOS（是.bin格式的文件），然后在GNS3的―编辑‖–
>―首选项‖–>‖Qemu‖–>‖PIX‖，在binary image中设置相应IOS文件即可。
[PIX的设置界面]
2. PIX的激活
要完全使用PIX的功能，需要激活PIX，激活方法如下(引用自网络)：
pixfirewall> en
Password:
pixfirewall# sh version
Cisco PIX Security Appliance Software Version 7.2(2)
Compiled on Wed 22-Nov-06 14:16 by builders
System image file is ―Unknown, monitor mode tftp booted image‖
Config file at boot was ―startup-config‖
pixfirewall up 3 mins 23 secs
Hardware: PIX-525, 256 MB RAM, CPU Pentium II 1 MHz
Flash E28F128J3 @ 0xfff00000, 16MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB
0: Ext: Ethernet0 : address is 00, irq 9
1: Ext: Ethernet1 : address is 01, irq 11
2: Ext: Ethernet2 : address is 02, irq 11
3: Ext: Ethernet3 : address is 03, irq 11
4: Ext: Ethernet4 : address is 04, irq 11
The Running Activation Key is not valid, using default settings:
Licensed features for this platform:
Maximum Physical Interfaces : 6
Maximum VLANs : 25
Inside Hosts : Unlimited
Failover : Disabled //Failover 不可用
VPN-DES : Disabled
VPN-3DES-AES : Disabled
Cut-through Proxy : Enabled
Guards : Enabled
URL Filtering : Enabled
Security Contexts : 0
GTP/GPRS : Disabled
VPN Peers : Unlimited
This platform has a Restricted (R) license.
Serial Number: 808102688 //序列号
Running Activation Key: 0×00000000 0×00000000 0×00000000 0×00000000
0×00000000 //激活码
Configuration has not been modified since last system restart.
pixfirewall# activation-key 0xd2390d2c 0x9fc4b36d 0x98442d99 0xeef7d8b1 //输入激活
码
The following features available in flash activation key are NOT
available in new activation key:
Failover is different.
flash activation key: Restricted(R)