2024年7月31日发(作者：百依白)
Ibanez SR405QM Backplate Replacement
Follow these steps to remove the
Written By: Chris Pittner
This document was generated on 2022-12-18 06:44:25 AM (MST).
© iFixit — CC BY-NC-SA
INTRODUCTION
Follow these steps to remove the back plate from your Ibanez 5 String Bass Model SR405QM guitar.
This is useful if you need to access the output jack, the potentiometer, or the tremolo system. A
Phillips #2 screwdriver is required to remove the screws on the backplate.
TOOLS:
Phillips #2 Screwdriver (1)
This document was generated on 2022-12-18 06:44:25 AM (MST).
© iFixit — CC BY-NC-SA
Step 1 — Backplate
Use a Phillips #2 screwdriver to remove the four screws on the backplate.
Step 2
Remove the cap by lifting upwards, revealing the circuitry of the instrument.
To reassemble your device, follow these instructions in reverse order.
This document was generated on 2022-12-18 06:44:25 AM (MST).
© iFixit — CC BY-NC-SA
2024年7月31日发(作者：百依白)
Ibanez SR405QM Backplate Replacement
Follow these steps to remove the
Written By: Chris Pittner
This document was generated on 2022-12-18 06:44:25 AM (MST).
© iFixit — CC BY-NC-SA
INTRODUCTION
Follow these steps to remove the back plate from your Ibanez 5 String Bass Model SR405QM guitar.
This is useful if you need to access the output jack, the potentiometer, or the tremolo system. A
Phillips #2 screwdriver is required to remove the screws on the backplate.
TOOLS:
Phillips #2 Screwdriver (1)
This document was generated on 2022-12-18 06:44:25 AM (MST).
© iFixit — CC BY-NC-SA
Step 1 — Backplate
Use a Phillips #2 screwdriver to remove the four screws on the backplate.
Step 2
Remove the cap by lifting upwards, revealing the circuitry of the instrument.
To reassemble your device, follow these instructions in reverse order.
This document was generated on 2022-12-18 06:44:25 AM (MST).
© iFixit — CC BY-NC-SA