2024年8月22日发(作者：夏晓桐)
Intelligent Wireless Devices
WSK-PULL-DA
SWIFT Wireless Pullstation
The Silent Knight® SWIFT® addressable pull station is a dual-action, manual pull
station with a key-lock reset feature that provides one addressable alarm initiating
input. The pull station features similar aesthetic design and durable construction
characteristics as the wired counterpart to blend seamlessly throughout the
environment. The device communicates to the FACP through the SWIFT mesh
network and gateway, and is powered by 4 batteries offering a 2-year, UL listed battery
life.
Installation is fast and straightforward by using a mounting plate that can be surface
mounted. Once the mounting plate is firmly attached to the wall, the pull station is
snapped into place and locked down with 3 screws.
The mechanical operation is simple and easy to use in an emergency with a PUSH IN/
PULL DOWN handle that latches in the down position to clearly indicate the station
has been operated while the word “ACTIVATED” appears on top of the handle in bright
yellow, further indicating the operation of the station.
The wireless pull station meets the Americans with Disabilities Act Accessibility
Guidelines’ (ADAAG) controls and operating mechanisms guidelines (section
4.1.3[13]) and the Americans with Disabilities Act (ADA) requirement for a 5-pound
maximum pull force to activate the pull station and conforms to ANSI/UL Standard
38.
The SWIFT wireless system offers intelligent (addressable) devices which provide
secure, reliable communication to the Fire Alarm Control Panel (FACP) across a Class
A mesh network. Wireless devices create an opportunity for applications where it is
costly (concrete walls/ceilings, buried wires), obtrusive (surface mount conduit), or
possibly dangerous (asbestos) to use traditional wired devices. In addition, both wired
and wireless devices can be present on the same FACP providing an integrated wired-
wireless solution for increased installation potential.
FEATURES & BENEFITS
•Easy, fast, wireless
installation
•Participates in a Class
A mesh network
•Maintenance
personnel can open
station for inspection
and address setting
without causing an
alarm condition
• Built-in tri-color LED
flashes in normal
operation and latches
steady red when in
alarm
•Handle latches in down
position and the word
“ACTIVATED” appears
to clearly indicate the
station has been
operated
•Standard “code wheel”
for setting the SLC
address
•For use in commercial
applications
•Smooth dual-action
design
•Highly visible
•Meets ADAAG controls
and operating
mechanisms
guidelines (Section
4.1.3[13]); meets ADA
requirement for 5lb.
maximum activation
force
•Meets UL 38, Standard
for Manually Actuated
Signaling Boxes
•Made of durable
polycarbonate material
•Attractive shape and
textured finish
•Key reset
•Includes Braille text on
station handle
The mesh network within the SWIFT system creates a child-parent
relationship between the devices so that each device has two parents
providing a second path for communications on every device. If one
device can no longer operate for any reason, the rest of the devices
can still communicate with each other, directly or through one or more
intermediate devices. Once an initial mesh network is formed, mesh
restructuring automatically occurs to find the strongest paths
possible within the network.
The SWIFT system also engages frequency hopping to prevent
system interference whether intentional or accidental. Each device
complies with part 15 of the FCC rules meaning operation is subject
to the following two conditions: 1) The device may not cause harmful
interference and 2) The device must accept any interference received
including interference that may cause undesired operation.
Compatible Control Panels
•6700
•6808
•6820
•6820EVS
SWIFT Components and Ordering Information
•WSK-PULL-DA: Wireless addressable pullstation. Requires (4) CR-
123A batteries (included).
•WSK-WGI: Wireless SWIFT Gateway - 1 SWIFT Gateway is required
for each wireless mesh, and supports up to 49 SWIFT detectors or
modules. Connects to the SLC loop of a compatible panel using SK
protocol. Power may be supplied by the SLC circuit or via an
optional 24VDC input.
Note: Use of the 24VDC input may be more convenient for service as it allows for powering
down a gateway without shutting down an SLC loop.
•WSK-PHOTO: Intelligent, wireless photo detector. Ships with
B501W base included. Requires (4) CR-123A batteries (included).
•WSK-HEAT-ROR: Intelligent wireless rate of rise (135°) heat
detector. Ships with B501W base included. Requires (4) CR-123A
batteries (included).
•
WSK-PHOTO-T: Intelligent wireless photo/heat detector. Ships
with B501W base included. Requires (4) CR-123A batteries
(included).
•
WSK-HEAT: Intelligent wireless fixed-temperature (135°) heat
detector. Ships with B501W base included. Requires (4) CR-123A
batteries (included).
•
WSK-MONITOR: Wireless monitor module. Used to monitor
devices with mechanical contact actuation. Includes a special
cover with a built- in tamper magnet. Recommended for
installation in a SMB500-WH box (ordered separately) rather than
Page 2 of 3 — SK-61056:B • 10/30/2018
a metal backbox for best performance. Requires (4) CR-123A
batteries (included).
•
WSK-RELAY: Wireless relay module for use with the WSK-WGI
wireless gateway. Includes a special cover with a built-in tamper
magnet. Recommended for installation in an SMB500-WH box
(ordered separately) rather than a metal backbox for best
performance. Requires (4) CR-123A batteries (included).
•
WAV-CRL, WAV-CWL: SWIFT Wireless Addressable AV bases.
Requires (8) CR-123A batteries (included). Requires a non-
compact ceiling System Sensor® L-series notification device
(ordered separately).
•
W-SYNC: Wireless sync module. Requires (4) CR-123A batteries
(included).
•
SMB500-WH: Optional surface-mount backbox.
•SWIFT Tools: Programming and diagnostic utility. Free download
from . For installation on a (typically laptop)
PC running an approved version of Windows (See Minimum
System Requirements for SWIFT Tools). Requires the W-USB radio/
antenna dongle for communication with SWIFT Wireless devices.
•
W-USB: Wireless USB radio/antenna dongle that plugs into the
USB port of a PC running SWIFT Tools. The W-USB provides a
communication link with SWIFT Wireless devices that are within
approximately 20 feet and have not formed a mesh. Alternately,
when the devices have formed a mesh, bringing the PC/W-USB
within range (20 ft.) of the gateway for that mesh will allow SWIFT
Tools to acquire information on all devices in that mesh, including
point-to-point signal strength for all links.
•
W-BATCART: Wireless battery cartridge, 10-pack. For use with
wireless pullstations and AV bases.
WSK-PULL-DA
Technical Specifications
Maximum Transmit RF Power: 17 dBm
Radio Frequency Range: 902-928 MHz
Temperature Range: 32°F to 120°F (0°C to 49°C)
Humidity: 10% to 93% Non-condensing
Battery Type: 4 Panasonic® CR123A or 4 Duracell®
DL123A
Battery Life: 2 year minimum
Battery Replacement: Upon TROUBLE BATTERY LOW
display and/or during annual maintenance
Dimensions: 5.6" (142 mm) H x 4.2" (107 mm) W x 2.1"
(53 mm) D
Honeywell Silent Knight
12 Clintonville Road
Northford, CT 06472-1610
203.484.7161
AGENCY LISTINGS AND APPROVALS
The listings and approvals below apply to the WSK-PULL-
DA. In some cases, certain modules may not be listed by
certain approval agencies or listing may be in process.
Consult factory for latest listing status.
UL Listed: S6012
CSFM: 7150-0559:0513
FM Approved
FDNY: COA #6246, #6249, #6250
FCC ID: AUBWFSPS
SK-61056 | B | 10/18
©2018 Honeywell International Inc.
Silent Knight®, System
Sensor®, and SWIFT® are
registered trademarks of
Honeywell International Inc.
Microsoft® and Windows® are
registered trademarks of
Microsoft Corporation.
Duracell® is a registered
trademark of Duracell U.S.
Operations Inc. Panasonic® is
a registered trademark of
Panasonic Corporation.
©2018 by Honeywell
International Inc. All rights
reserved. Unauthorized use of
this document is strictly
prohibited.
This document is not intended
to be used for installation
purposes. We try to keep our
product information up-to-
date and accurate. We cannot
cover all specific applications
or anticipate all requirements.
All specifications are subject to
change without notice.
Country of origin: Mexico
2024年8月22日发(作者：夏晓桐)
Intelligent Wireless Devices
WSK-PULL-DA
SWIFT Wireless Pullstation
The Silent Knight® SWIFT® addressable pull station is a dual-action, manual pull
station with a key-lock reset feature that provides one addressable alarm initiating
input. The pull station features similar aesthetic design and durable construction
characteristics as the wired counterpart to blend seamlessly throughout the
environment. The device communicates to the FACP through the SWIFT mesh
network and gateway, and is powered by 4 batteries offering a 2-year, UL listed battery
life.
Installation is fast and straightforward by using a mounting plate that can be surface
mounted. Once the mounting plate is firmly attached to the wall, the pull station is
snapped into place and locked down with 3 screws.
The mechanical operation is simple and easy to use in an emergency with a PUSH IN/
PULL DOWN handle that latches in the down position to clearly indicate the station
has been operated while the word “ACTIVATED” appears on top of the handle in bright
yellow, further indicating the operation of the station.
The wireless pull station meets the Americans with Disabilities Act Accessibility
Guidelines’ (ADAAG) controls and operating mechanisms guidelines (section
4.1.3[13]) and the Americans with Disabilities Act (ADA) requirement for a 5-pound
maximum pull force to activate the pull station and conforms to ANSI/UL Standard
38.
The SWIFT wireless system offers intelligent (addressable) devices which provide
secure, reliable communication to the Fire Alarm Control Panel (FACP) across a Class
A mesh network. Wireless devices create an opportunity for applications where it is
costly (concrete walls/ceilings, buried wires), obtrusive (surface mount conduit), or
possibly dangerous (asbestos) to use traditional wired devices. In addition, both wired
and wireless devices can be present on the same FACP providing an integrated wired-
wireless solution for increased installation potential.
FEATURES & BENEFITS
•Easy, fast, wireless
installation
•Participates in a Class
A mesh network
•Maintenance
personnel can open
station for inspection
and address setting
without causing an
alarm condition
• Built-in tri-color LED
flashes in normal
operation and latches
steady red when in
alarm
•Handle latches in down
position and the word
“ACTIVATED” appears
to clearly indicate the
station has been
operated
•Standard “code wheel”
for setting the SLC
address
•For use in commercial
applications
•Smooth dual-action
design
•Highly visible
•Meets ADAAG controls
and operating
mechanisms
guidelines (Section
4.1.3[13]); meets ADA
requirement for 5lb.
maximum activation
force
•Meets UL 38, Standard
for Manually Actuated
Signaling Boxes
•Made of durable
polycarbonate material
•Attractive shape and
textured finish
•Key reset
•Includes Braille text on
station handle
The mesh network within the SWIFT system creates a child-parent
relationship between the devices so that each device has two parents
providing a second path for communications on every device. If one
device can no longer operate for any reason, the rest of the devices
can still communicate with each other, directly or through one or more
intermediate devices. Once an initial mesh network is formed, mesh
restructuring automatically occurs to find the strongest paths
possible within the network.
The SWIFT system also engages frequency hopping to prevent
system interference whether intentional or accidental. Each device
complies with part 15 of the FCC rules meaning operation is subject
to the following two conditions: 1) The device may not cause harmful
interference and 2) The device must accept any interference received
including interference that may cause undesired operation.
Compatible Control Panels
•6700
•6808
•6820
•6820EVS
SWIFT Components and Ordering Information
•WSK-PULL-DA: Wireless addressable pullstation. Requires (4) CR-
123A batteries (included).
•WSK-WGI: Wireless SWIFT Gateway - 1 SWIFT Gateway is required
for each wireless mesh, and supports up to 49 SWIFT detectors or
modules. Connects to the SLC loop of a compatible panel using SK
protocol. Power may be supplied by the SLC circuit or via an
optional 24VDC input.
Note: Use of the 24VDC input may be more convenient for service as it allows for powering
down a gateway without shutting down an SLC loop.
•WSK-PHOTO: Intelligent, wireless photo detector. Ships with
B501W base included. Requires (4) CR-123A batteries (included).
•WSK-HEAT-ROR: Intelligent wireless rate of rise (135°) heat
detector. Ships with B501W base included. Requires (4) CR-123A
batteries (included).
•
WSK-PHOTO-T: Intelligent wireless photo/heat detector. Ships
with B501W base included. Requires (4) CR-123A batteries
(included).
•
WSK-HEAT: Intelligent wireless fixed-temperature (135°) heat
detector. Ships with B501W base included. Requires (4) CR-123A
batteries (included).
•
WSK-MONITOR: Wireless monitor module. Used to monitor
devices with mechanical contact actuation. Includes a special
cover with a built- in tamper magnet. Recommended for
installation in a SMB500-WH box (ordered separately) rather than
Page 2 of 3 — SK-61056:B • 10/30/2018
a metal backbox for best performance. Requires (4) CR-123A
batteries (included).
•
WSK-RELAY: Wireless relay module for use with the WSK-WGI
wireless gateway. Includes a special cover with a built-in tamper
magnet. Recommended for installation in an SMB500-WH box
(ordered separately) rather than a metal backbox for best
performance. Requires (4) CR-123A batteries (included).
•
WAV-CRL, WAV-CWL: SWIFT Wireless Addressable AV bases.
Requires (8) CR-123A batteries (included). Requires a non-
compact ceiling System Sensor® L-series notification device
(ordered separately).
•
W-SYNC: Wireless sync module. Requires (4) CR-123A batteries
(included).
•
SMB500-WH: Optional surface-mount backbox.
•SWIFT Tools: Programming and diagnostic utility. Free download
from . For installation on a (typically laptop)
PC running an approved version of Windows (See Minimum
System Requirements for SWIFT Tools). Requires the W-USB radio/
antenna dongle for communication with SWIFT Wireless devices.
•
W-USB: Wireless USB radio/antenna dongle that plugs into the
USB port of a PC running SWIFT Tools. The W-USB provides a
communication link with SWIFT Wireless devices that are within
approximately 20 feet and have not formed a mesh. Alternately,
when the devices have formed a mesh, bringing the PC/W-USB
within range (20 ft.) of the gateway for that mesh will allow SWIFT
Tools to acquire information on all devices in that mesh, including
point-to-point signal strength for all links.
•
W-BATCART: Wireless battery cartridge, 10-pack. For use with
wireless pullstations and AV bases.
WSK-PULL-DA
Technical Specifications
Maximum Transmit RF Power: 17 dBm
Radio Frequency Range: 902-928 MHz
Temperature Range: 32°F to 120°F (0°C to 49°C)
Humidity: 10% to 93% Non-condensing
Battery Type: 4 Panasonic® CR123A or 4 Duracell®
DL123A
Battery Life: 2 year minimum
Battery Replacement: Upon TROUBLE BATTERY LOW
display and/or during annual maintenance
Dimensions: 5.6" (142 mm) H x 4.2" (107 mm) W x 2.1"
(53 mm) D
Honeywell Silent Knight
12 Clintonville Road
Northford, CT 06472-1610
203.484.7161
AGENCY LISTINGS AND APPROVALS
The listings and approvals below apply to the WSK-PULL-
DA. In some cases, certain modules may not be listed by
certain approval agencies or listing may be in process.
Consult factory for latest listing status.
UL Listed: S6012
CSFM: 7150-0559:0513
FM Approved
FDNY: COA #6246, #6249, #6250
FCC ID: AUBWFSPS
SK-61056 | B | 10/18
©2018 Honeywell International Inc.
Silent Knight®, System
Sensor®, and SWIFT® are
registered trademarks of
Honeywell International Inc.
Microsoft® and Windows® are
registered trademarks of
Microsoft Corporation.
Duracell® is a registered
trademark of Duracell U.S.
Operations Inc. Panasonic® is
a registered trademark of
Panasonic Corporation.
©2018 by Honeywell
International Inc. All rights
reserved. Unauthorized use of
this document is strictly
prohibited.
This document is not intended
to be used for installation
purposes. We try to keep our
product information up-to-
date and accurate. We cannot
cover all specific applications
or anticipate all requirements.
All specifications are subject to
change without notice.
Country of origin: Mexico