FLOWMAX咖啡花茶机FM2SS-7系列安装及操作手册说明书-USB迷|专注于互联网分享

2024年9月23日发(作者：黄华奥)

(see page 2)

Coffee and Tea Brewer

多功能咖啡花茶机

FLOWMAX

FM2SS-7 Series

Installation and Operating Manual

安装及操作手册

P/N 07.04.546.00

Do not operate this equipment unless you have

read and understood the contents of this manual!

Failure to follow the instructions contained in this

manual may result in serious injury or death. This

manual contains important safety information

concerning the maintenance, use, and operation

of this product. If you’re unable to understand the

contents of this manual, please bring it to the

attention of your supervisor. Keep this manual in

a safe location for future reference.

请在认真阅读并理解本手册的内容后再操作本设备！

不按照本手册中的说明操作可能会导致严重的人身伤

亡事故。本手册中包含了有关本产品维护、使用和操

作的重要安全事项。如果您不理解本手册的内容，请

将本手册交给主管人员，以提请其注意。请将本手册

妥善放置，以便参照。

English = p 2

中文=第13 页

CONTENTS

Important 2

Important 3

Electrical 5

English

Brewing Coffee 8

Programming 9

.10

Removing Lime and .10

International 12

IMPORTANT OWNER INFORMATION

Record the model number, serial number, voltage, and

purchase date of the unit in the spaces below (specification

label located on the back of the unit). Please have this

information available when calling Hatco for service assistance.

Model No.____________________________________

Serial No.____________________________________

Voltage______________________________________

Date of Purchase______________________________

Business

Hours:

E-mail:

Fax:

9:00 AM to 6:00 PM (Beijing Time)

Monday through Friday

********************

(0512) 6732-5092

Telephone:(0512) 6732-5091

Additional information can be found by visiting our web site at

Completing online warranty registration will prevent delay in

obtaining warranty coverage. Access the Hatco website at

, select the Parts & Servicepull-down

menu, and click on “Warranty Registration”.

INTRODUCTION

The Hatco FLOWMAXCoffee and Tea Brewer is designed to

brew coffee and tea as well as maintain proper serving and

holding temperatures for “just-made” quality over prolonged

periods of time. The unit’s control panel digitally displays the

brewing mode as well as indicates brew cycle or water heating

completion. Programmable control buttons allow for easy coffee

brewing, tea brewing, or water heating.

The FLOWMAXCoffee and Tea Brewer can brew 2.3–7.0 liters

(13–40 servings) of coffee or tea quickly—creating versatility

for home or commercial use.

Hatco FLOWMAXCoffee and Tea Brewers are quality built to

meet the demands of foodservice operations and provide years

of trouble-free performance. The heating elements are

guaranteed against breakage and burnout for 1 year.

FLOWMAXCoffee and Tea Brewers are products of extensive

research and field testing. The materials used were selected

for maximum durability, attractive appearance, and optimum

performance. Every unit is inspected and tested thoroughly

prior to shipment.

This

manual

provides

the

installation,

safety,

and

operating

instructions for a FLOW

MAX

Coffee and Tea Brewer. Hatco

recommends all installation, operatin

g, and safety instructions

appearing in this manual be read prior

to installation or operation

of the unit.

Safety information that appears in th

is manual is identified by

the following signal word panels:

WARNING

indicates

hazardous

situation

which,

not

avoided, could result in death or se

rious injury.

CAUTION

indicates

hazardous

situation

which,

not

avoided, could result in minor or m

oderate injury.

NOTICE

NOTICE is used to address practice

s not related to personal

injury.

Form No. FM2SSM_CN-0612

English

IMPORTANT SAFETY INFORMATION

Read the following important safety information before using this equipment to avoid

serious injury or death and to avoid damage to equipment or property

WARNING

ELECTRIC SHOCK HAZARD:

•Plug unit into a properly grounded electrical receptacle

of the correct voltage, size, and plug configuration. If

plug and receptacle do not match, contact a qualified

electrician to determine and install the proper voltage

and size electrical receptacle.

•Turn OFF power switch, unplug power cord, and allow

unit to cool before performing any cleaning,

adjustments, or maintenance.

•DO NOT submerge or saturate with water. Unit is not

waterproof. Do not operate if unit has been submerged

or saturated with water.

•Unit is not weatherproof. Locate unit indoors where

ambient air temperature is a minimum of 21°C (70°F).

•This unit is not “jet-proof” construction. Do not use jet-

clean spray to clean this unit.

•Do not steam clean or use excessive water on unit.

CAUTION

BURN HAZARD:

•Some exterior surfaces on unit will get hot. Use caution

when touching these areas.

•Hot water in unit may cause scalding injury. Allow unit

to cool before draining or cleaning.

•Make sure cover is securely in position before starting

brew cycle. Hot water and escaping steam may cause

scalding injury during brew cycle.

•Do not move or relocate unit when it contains hot

liquids. Turn off unit and allow to cool completely

before moving or cleaning.

Locate unit at the proper counter height in an area that is

convenient for use. The location should be level to prevent

the unit or its contents from falling accidentally and strong

enough to support the weight of the unit and contents.

•Do not allow power cord to hang over edge of counter.

•Turn off unit when filling with water and avoid

splashing.

•Discontinue use if power cord is frayed or worn.

•Do not pull unit by power cord.

NOTICE

Use non-abrasive cleaners and cloths only. Abrasive

cleaners and cloths could scratch finish of unit, marring its

appearance and making it susceptible to soil accumulation.

Make sure a minimum of 2 liters (0.5 gallons) of water is in

unit before plugging in or operating. Operating unit with

less than 2 liters (0.5 gallons) of water will cause unit to

overheat.

Use only cool water when filling unit.

•Do not attempt to repair or replace a damaged power

cord. The cord must be replaced by Hatco, an

Authorized Hatco Service Agent, or a person with

similar qualifications.

•Use only Genuine Hatco Replacement Parts when

service is required. Failure to use Genuine Hatco

Replacement Parts will void all warranties and may

subject operators of the equipment to hazardous

electrical voltage, resulting in electrical shock or burn.

Genuine Hatco Replacement Parts are specified to

operate safely in the environments in which they are

used. Some aftermarket or generic replacement parts

do not have the characteristics that will allow them to

operate safely in Hatco equipment.

Units are equipped with a high temperature limit safety

switch that will shut off power if unit overheats. Allow unit

to cool and refill with water before operating.

Make sure all operators have been instructed on the safe

and proper use of the unit.

This unit is not intended for use by children or persons

with reduced physical, sensory, or mental capabilities.

Ensure proper supervision of children and keep them away

from the unit.

This unit has no “user-serviceable” parts. If service is

required on this unit, contact an Authorized Hatco Service

Agent or contact the Hatco Service Department at

(0512) 6732-5091; fax (0512) 6732-5092.

Form No. FM2SSM_CN-0612

MODEL DESCRIPTION

The FLOWMAXCoffee and Tea Brewer model FM2SS-7 is

equipped with a digital control panel that includes two

programmable brew cycles and a programmable water heating

cycle. The digital Temperature Display gives visual confirmation

of temperature, active program, and brew time. The Heating

and Ready indicator lights on the control panel, along with the

glass liquid level tube offer visual status of the unit’s contents

and current status.

Other standard equipment includes flip-down handles, a locking

cover, an insulated, stainless steel tank providing 2.3–7.0 liters

(13–40 servings) of coffee or tea. Interior components include

a coffee/tea basket, a spreader cover, and a pumping tube

assembly—all of which are dishwasher-safe. A 1829 mm (72")

electrical cord and plug comes standard for safety.

Model FM2SS-7 is equipped with two heating elements inside

the stainless steel tank. The outer, circular element preheats

the water before the actual brewing process begins. The center,

dome-shaped element in the percolation well provides the heat

for the brewing/percolating process.

Cover

Lock

(Locked

Position)

English

Flip-Down

Handle

Dispenser

Handle

Liquid Level

Tube

Power Cord

Control Panel

Dispenser Nozzle

Model FM2SS-7

MODEL DESIGNATION

F M 2 S S - 7

FLOMAX Coffee and

Tea Brewer

Style

Capacity (liters)

Stainless Steel Tank

Form No. FM2SSM_CN-0612

English

SPECIFICATIONS

Plug Configurations

Units are supplied from the factory with an electrical cord and

plug. Plugs are supplied according to the application.

WARNING

ELECTRIC SHOCK HAZARD: Plug unit into a properly

grounded electrical receptacle of the correct voltage, size,

and plug configuration. If plug and receptacle do not

match, contact a qualified electrician to determine and

install the proper voltage and size electrical receptacle.

NOTE:The specification label is located on the back of the unit.

See label for serial number and verification of unit

electrical information.

BS-1363

CEE 7/7 Schuko

China CCC (AS 3112)

Plug Configurations

Electrical Rating Chart

Model

FM2SS-7

Voltage

230 (CE)

Watts

2600

Amps

11.3

Plug Configuration

BS-1363, CEE 7/7 Schuko, or China CCC

Shipping Weight

11 kg (24 lbs.)

NOTE:Shipping weight includes packaging.

Dimensions

Model

FM2SS-7

Width

(A)

256 mm

(10-1/8")

Depth

(B)

305 mm

(12")

Height

(C)

454 mm

(17-7/8")

Footprint

Width (D)

175 mm

(6-7/8")

Footprint

Depth (E)

175 mm

(6-7/8")

Front View

Side View

Form No. FM2SSM_CN-0612

INSTALLATION

General

the unit from the carton.

the information packet.

FLOWMAXCoffee and Tea Brewers are shipped from the

factory with most components assembled and ready for use.

Care should be taken when unpacking shipping carton to avoid

damage to unit and the components enclosed.

English

tape and protective packaging from all surfaces

of the unit and any accessories.

the unit upright and place the unit in the desired

location.

•Locate the unit in an area where the ambient air

temperature is constant and a minimum of 21° C

(70° F).

•Make sure the unit is at the proper counter height in an

area convenient for use.

•Make sure the countertop is level and strong enough to

support the weight of the unit and contents.

•Make sure all the feet on the bottom of the unit are

positioned securely on the countertop.

NOTE:The unit must be transported in the upright position.

WARNING

ELECTRIC SHOCK HAZARD: Unit is not weatherproof.

Locate unit indoors where ambient air temperature is a

minimum of 21°C (70°F).

CAUTION

Locate unit at the proper counter height in an area that is

convenient for use. The location should be level to prevent

the unit or its contents from falling accidentally and strong

enough to support the weight of the unit and contents.

Pumping Tube

Assembly

Cover

Stainless Steel Tank

Cover Lock

(Unlocked Positioned)

Spreader Cover

Coffee/Tea Basket

Liquid Level Tube

Dispenser Handle

Flip-Down Handle

Control Panel

FM2SS-7 Components

Form No. FM2SSM_CN-0612

English

OPERATION

Temperature

.The Temperature Display shows the

current temperature of the unit or the

remaining brew time of a brew cycle. It

also shows the active program,

temperature setpoints, and timer

setpoints during programming as well as

error codes (see the MAINTENANCE

section for error code information).

Press the Power Button to turn on the

unit. When the unit is on, press the

Power Button to turn off the unit.

General

Use the following procedures to operate a FLOWMAXCoffee

and Tea Brewer.

WARNING

Read all safety messages in the IMPORTANT SAFETY

INFORMATIONsection before operating this equipment.

CAUTION

BURN HAZARD:

•Some exterior surfaces on unit will get hot. Use caution

when touching these areas.

•Make sure cover is securely in position before starting

brew cycle. Hot water and escaping steam may cause

scalding injury during brew cycle.

•Do not move or relocate unit when it contains hot

liquids. Turn off unit and allow to cool completely

before moving or cleaning.

the entire unit inside and out before using for the

first time. See the MAINTENANCE section for cleaning

instructions.

Temperature the Temperature Button to

change temperature setpoints in

programming mode. Use the Up Arrow

and Down Arrow buttons to set the

desired temperature within a range of

85–95°C (185–203°F).

Press the Time Button to change total

brew time setpoints in programming

mode. Use the Up Arrow and Down

Arrow buttons to set the desired brew

time within a range of 1–35 minutes.

Start/Press the Start/Stop Button to start a

brew or water heating cycle. When a

cycle is running, press the Start/Stop

Button to pause the cycle (the

Temperature Display will flash).

the “Control Panel” section to learn about the

controls.

to the appropriate procedure in this section for the

desired hot beverage. For coffee or tea, see the “Brewing

Coffee or Tea” section. For hot water, see the “Heating

Water” section.

Control Panel

Use the following section to learn about the functions of the

controls on the control panel.

Down Arrow Button..Press the Down Arrow Button to

decrease a setting or toggle through

programs.

Up Press the Up Arrow button to increase

a setting or toggle through programs.

Heating

Indicator

Power

Button

Temperature

Button

Ready

Indicator

Start/Stop

Button

Up Arrow

Button

Time

Button

Temperature

Display

FM2SS-7 Control Panel

Down

Arrow

Button

The Heating Indicator (red) will turn on

after the Start/Stop Button is pressed to

start a cycle. The Heating Indicator

shows that the elements are active and

a brew/water heating cycle is in

progress.

The Ready Indicator (green) will turn

on when the brew/water heating cycle

is complete and the unit is ready to

serve. The unit is in Holdingmode and

will maintain the setpoint temperature.

Form No. FM2SSM_CN-0612

OPERATION

Brewing Coffee or Tea

Use the following procedure to brew coffee or tea.

the cover locks to the unlocked position and

remove the top cover.

the coffee/tea basket, spreader cover, and

pumping tube assembly from the tank.

English

the unit into a properly grounded electrical outlet of

the correct voltage, size, and plug configuration. See the

SPECIFICATIONS section for details.

the Power Button to turn on the unit.

•The unit enters Readymode and the Temperature

Display shows the active program. There are two

available brew cycle programs:

P1=Program 1: Custom Brew Cycle—Brews coffee or

tea to a user-defined setpoint temperature and

brew time.

P2=Program 2: Custom Brew Cycle—Brews coffee or

tea to a user-defined setpoint temperature and

brew time.

NOTE:To change program settings, go to the “Programming

the Unit” procedure in this section.

the Up Arrow or Down Arrow Button to toggle

through all available programs. Stop toggling when the

desired brew cycle program (“P1”or “P2”) isshown on the

Temperature Display.

the Start/Stop Button to start the selected brew cycle.

•The Heating Indicator will turn on to indicate that the unit

is heating and a brew cycle is in progress.

•The Temperature Display shows the selected brew cycle

followed by the holding temperature and the total brew

time, each for three seconds.

•After the Temperature Display shows the specific brew

cycle information, the remaining total brew time is

shown.

the brew cycle is complete (1–35 minutes), the

ReadyIndicator will turn on. The coffee or tea is ready to

be served.

NOTE:When the brew cycle is complete, the unit switches

automatically to Holding mode, and the setpoint holding

temperature is shown on the Temperature Display. The

unit will keep hot beverages fresh as long as it is left on.

NOTE:For best results, use a hot pad to carefully remove the

coffee/tea basket and pumping tube assembly when the

brew cycle is complete. This will prevent bitter oils from

dripping into the coffee or tea during the holding cycle.

make additional coffee or tea:

off and unplug the unit.

the unit and its parts with cold water.

the “Brewing Coffee or Tea” procedure.

NOTE:If the unit overheats while in

operation, a safety thermostat

will shut off the unit. When

this happens, allow the unit to

cool, and press the

thermostat reset button on the

bottom of the unit. The unit

will not reset until it has

cooled completely. Refill with

cool water before operating.

b=See “Heating Water” in this section.

NOTICE

Make sure a minimum of 2 liters (0.5 gallons) of water is in

unit before plugging in or operating. Operating unit with

less than 2 liters (0.5 gallons) of water will cause unit to

overheat.

Use only cool water when filling unit.

NOTE:This unit is equipped with a low water sensor near the

bottom of the tank. The unit will not operate if the water

level is not above the sensor.

the tank with cool water to the desired cup level. Cup

level markings are located on the front liquid level tube.

NOTE:The unit makes 2.3–7.0 liters (13–40 servings) of

brewed coffee or tea. DO NOT overfill or underfill the

unit. Fill according to the markings on the liquid level

tube for the number of cups desired. One serving

equals 0.24 l (five fluid ounces) of brewed coffee or tea.

n the coffee/tea basket to keep small particles from

sifting through.

the desired amount of ground coffee or tea to the

coffee/tea basket (for coffee, refer to the “Coffee Brewing

Chart”). The amounts can be varied to suit taste.

the top of the pumping tube assembly up through

the bottom hole of the coffee/tea basket. Cover the

coffee/tea basket with the spreader cover.

the top end of the pumping tube assembly and place

the tube with the coffee/tea basket into the unit. Make sure

the bottom of the pumping tube assembly is positioned

properly in the center of the tank inside the percolation well.

NOTE:The unit may not percolate if the pumping tube

assembly is not positioned properly.

the cover locks to the locked position to secure the

cover. Make sure the handles are in the “down” position.

Heating

Indicator

Power

Button

Temperature

Button

Ready

Indicator

Start/Stop

Button

Up Arrow

Button

Time

Button

Temperature

Display

FM2SS-7 Control Panel

Down

Arrow

Button

Thermostat

Reset Button

Form No. FM2SSM_CN-0612

English

Coffee Brewing Chart

Servings

13 (2.3 l)

20 (3.5 l)

26 (4.6 l)

33 (5.8 l)

40 (7.0 l)

Grams

228–256

256–299

299–342

342–456

456–584

Ground Coffee

Tablespoons

16–18

18–21

21–24

24–32

32–41

Cups

1¼

1½

1¾

2¼

OPERATION

NOTE:If the unit overheats while in operation, a safety

thermostat will shut off the unit. When this happens,

allow the unit to cool, and press the thermostat reset

button on the bottom of the unit. The unit will not reset

until it has cooled completely. Refill with cool water

before operating.

Use the following procedures to customize the brew cycle

programs and the water heating program.

NOTE:Inactivity for five seconds at anytime during

programming will return the unit to Ready mode.

Programming the Unit

NOTE:One serving equals 0.24 l (five fluid ounces) of brewed

coffee or tea.

Adjusting the Brew Cycle Programs

Heating Water

Use the following procedure to make hot water.

the top cover.

the coffee/tea basket, spreader cover, and

pumping tube assembly from the tank. Leave these

components out when heating water.

NOTE:This unit is equipped with a low water sensor near the

bottom of the tank. The unit will not operate if the water

level is not above the sensor.

the tank with cool water to the desired cup level. Cup

level markings are located on the front liquid level tube.

NOTE:The unit makes 2.3–7.0 liters (13–40 servings) of hot

water. DO NOT overfill or underfill the unit. Fill

according to the markings on the liquid level tube for

the number of cups desired. One serving equals 0.24 l

(five fluid ounces) of hot water.

the unit into a properly grounded electrical outlet of

the correct voltage, size, and plug configuration. See the

SPECIFICATIONS section for details.

the Power Button to turn on the unit.

•The unit enters Readymode and the Temperature

Display shows the active program. There is one water

heating program:

b=Water Heating: Heats water to a user-defined

setpoint temperature between 85–95°C

(185–203°F).

NOTE:To change program settings, go to the “Programming

the Unit” procedure in this section.

the Up Arrow or Down Arrow Button to toggle

through all availableprograms. Stop toggling when the

water heating program (“b”) isshown on the Temperature

Display.

the Start/Stop Button to start the water heating cycle.

•The Heating Indicator will turn on to indicate that the unit

is heating and a water heating cycle is in progress.

•The Temperature Display shows the current water

temperature.

the water heating cycle is complete (25–30 minutes),

the ReadyIndicator will turn on.

the unit into a properly grounded electrical outlet of

the correct voltage, size, and plug configuration. See the

SPECIFICATIONS section for details.

the Power Button to turn on the unit.

•The unit enters Readymode and the Temperature

Display shows the active program.

the Up Arrow or Down Arrow Button to toggle tothe

desired brew cycle program (“P1”or “P2”) on the

Temperature Display.

and hold the Start/Start Button for two seconds to

enter programming mode for the active brew cycle

program.

•Press the Temperature Button to adjust the setpoint

coffee/tea holding temperature. Use the Up Arrow and

Down Arrow buttons to set the desired temperature

within a range of 85–95°C (185–203°F).

•Press the Time Button to adjust the total brew time

setpoint. Use the Up Arrow and Down Arrow buttons to

set the desired brew time within a range of 1–35

minutes.

for five seconds for the values to be saved and the

unit to return to Readymode.

Adjusting the Water Heating Program

the unit into a properly grounded electrical outlet of

the correct voltage, size, and plug configuration. See the

SPECIFICATIONS section for details.

the Power Button to turn on the unit.

•The unit enters Readymode and the Temperature

Display shows the active program.

the Up Arrow or Down Arrow Button to toggle tothe

water heating program (“b”) on the Temperature Display.

and hold the Start/Start Button for two seconds to

enter programming mode for the water heating program.

•Press the Temperature Button to adjust the setpoint

water holding temperature . Use the Up Arrow button

and Down Arrow buttons to set the desired temperature

within a range of 85–95°C (185–203°F).

for five seconds for the values to be saved and the

unit to return to Readymode.

Form No. FM2SSM_CN-0612

MAINTENANCE

FLOWMAXCoffee and Tea Brewers are designed for maximum

durability and performance with minimum maintenance.

English

General

NOTICE

Use non-abrasive cleaners and cloths only. Abrasive

cleaners and cloths could scratch finish of unit, marring its

appearance and making it susceptible to soil accumulation.

down all exterior surfaces using a soft, damp cloth.

Stubborn stains may be removed with a good non-abrasive

cleaner.

the tank using water and a mild detergent. Rinse

thoroughly and dry.

Use the following procedure for periodic cleaning and de-liming

of the stainless steel tank.

NOTE:The lime and mineral content of the water used for

brewing will determine how often the deliming

procedure must be performed.

NOTE:Perform this procedure when the unit will not be used

for a period of time, such as the end of the day.

m steps 1–3 of the “Daily Cleaning” procedure in this

section.

the tank with a mixture of 75% water and 25% white

vinegar. Do not use flavored vinegar.

in the unit, and press the Power Button to turn on the

unit.

the Up Arrow or Down Arrow Button to toggle tothe

water heating program (“b”) on the Temperature Display.

the Start/Stop Button to start the water heating cycle.

•The Heating Indicator will turn on to indicate that the unit

is heating and a water heating cycle is in progress.

the unit to complete the entire heating cycle (25–30

minutes). The Ready indicator will turn on when the cycle

is complete.

the Power Button to turn off the unit. Unplug the

power cord and allow the unit to cool.

the water/vinegar solution from the tank.

the tank with clean water and perform steps 3–8 of this

procedure. Repeat this step twice.

the tank using water and a mild detergent. Rinse

thoroughly and dry.

NOTE:Heavy scale buildup may require additional treatments.

WARNING

ELECTRIC SHOCK HAZARD:

•Turn OFF power switch, unplug power cord, and allow

unit to cool before performing any cleaning,

adjustments, or maintenance.

•DO NOT submerge or saturate with water. Unit is not

waterproof. Do not operate if unit has been submerged

or saturated with water.

•Do not steam clean or use excessive water on unit.

•This unit is not “jet-proof” construction. Do not use jet-

clean spray to clean this unit.

Removing Lime and Mineral Deposits

•Use only Genuine Hatco Replacement Parts when

service is required. Failure to use Genuine Hatco

Replacement Parts will void all warranties and may

subject operators of the equipment to hazardous

electrical voltage, resulting in electrical shock or burn.

Genuine Hatco Replacement Parts are specified to

operate safely in the environments in which they are

used. Some aftermarket or generic replacement parts

do not have the characteristics that will allow them to

operate safely in Hatco equipment.

This unit has no “user-serviceable” parts. If service is

required on this unit, contact an Authorized Hatco Service

Agent or contact the Hatco Service Department at

(0512) 6732-5091; fax (0512) 6732-5092.

Daily Cleaning

To preserve the bright finish of the unit and maintain

performance, it is recommended that the exterior and interior

surfaces be cleaned daily.

NOTE:Before using the unit for the first time, the tank should

be filled with cold water only (no coffee or tea) and run

through a brewing cycle. This will remove any dust that

may have settled inside the unit.

CAUTION

BURN HAZARD:

•Hot water in unit may cause scalding injury. Allow unit

to cool before draining or cleaning.

off the unit, unplug the power cord, and allow the unit

to cool.

any remaining liquid from the tank.

the cover, coffee/tea basket, spreader cover, and

pumping tube assembly for proper cleaning in a

dishwasher or wash sink.

NOTE:When the pumping tube assembly is being washed,

make sure the washer on the bottom remains loose. If

coffee grounds are caught in the pumping tube, remove

by holding the tube under running water or using a

wooden pick.

•Do not move or relocate unit when it contains hot

liquids. Turn off unit and allow to cool completely

before moving or cleaning.

Form No. FM2SSM_CN-0612

English

TROUBLESHOOTING GUIDE

WARNINGWARNING

ELECTRIC SHOCK HAZARD: Turn OFF power switch,

unplug power cord, and allow unit to cool before

performing any cleaning, adjustments, or maintenance.

Press PowerButton to turn on unit.

Plug in power cord.

Reset circuit breaker.

Verify the supply voltage to the unit matches the

unit specifications.

Unplug unit and allow to cool. Empty unit, rinse

with cold water, and press thermostat reset

button on bottom of unit. Refer to OPERATION

section to restart.

Contact local Hatco Dealer for assistance

This unit must be serviced by trained and qualified

personnel only. Service by unqualified personnel may lead

to electric shock or burn.

No power to unit.

Symptom

Unit not turned on.

Probable CauseCorrective Action

Power cord not plugged in.

Circuit breaker tripped.

Supply voltage to unit is incorrect.

Unit shut off level too low and/or unit overheated.

Defective safety switch/temperature probe.

Coffee/Tea

won’t start.

percolationPumping tube assembly not positioned st position of pumping tube assembly.

Make sure bottom of pumping tube assembly is

positioned in center of the tank inside percolation

well.

Water level too sure a minimum of 2 liters (0.5 gallons) of

water is in unit before plugging in or operating.

Water level must be above low water level

sensor inside tank for unit to operate.

Contact local Hatco Dealer for assistance Heating element(s) defective.

Resetting the Thermostat

off and unplug the unit.

the unit to cool.

If the unit overheats during operation, use the following

procedure to reset the safety thermostat.

The Temperature Display may show an error code if the unit

goes into fault mode. Error codes will show on the display as the

letter “e” followed by a number, such as “e3”. The “e” indicates

“error” and the number indicates the mode the unit was in when

the error occurred.

If the Temperature display shows an error code, the most likely

cause is a defective temperature probe. Contact a local Hatco

Dealer for assistance (refer to the SERVICE INFORMATION

section in this manual).

Error Codes

any remaining liquid from

the tank.

the tank with cold water.

the thermostat reset

button on the bottom of the unit.

Thermostat

the unit with cold water and

Reset Button

follow the “Heating Water”

procedure in the OPERATIONsection of this manual to

test operation.

Form No. FM2SSM_CN-0612

SERVICE INFORMATION

The warranty on Hatco FLOWMAX Coffee and Tea Brewer is

for one year from date of purchase or eighteen months from

date of shipping from Hatco, whichever occurs first.

If you experience a problem with a Coffee and Tea Brewer

during the warranty period, please do the following:

The Hatco dealer will do the following:

English

•Provide replacement part(s) as required

Non-Warranty Problems

•Submit warranty claim to Hatco for processing

Contact Local Hatco Dealer

When contacting the Hatco dealer for service assistance,

please supply the dealer with the following information to

ensure prompt processing:

•Model of unit

•Serial number (located on the back of the unit)

•Specific problem with the unit

•Date of purchase

•Name of business

•Shipping address

•Contact name and phone number

If you experience a non-warranty problem that requires

assistance, please contact the nearest Authorized Hatco

Service Agency.

To locate the nearest Service Agency:

•call Hatco Service at (0512) 6732-5091

•**********************************

INTERNATIONAL LIMITED WARRANTY

T WARRANTY

Hatco warrants the products that it manufactures (the

“Products”) to be free from defects in materials and

workmanship, under normal use and service, for a period of

one (1) year from the date of purchase when installed and

maintained in accordance with Hatco’s written instructions or

18 months from the date of shipment from Hatco. Buyer must

establish the Product’s purchase date by registering the

Product with Hatco or by other means satisfactory to Hatco in

its sole discretion.

Hatco warrants the following Product components to be free

from defects in materials and workmanship from the date of

purchase (subject to the foregoing conditions) for the period(s)

of time and on the conditions listed below:

a)Two (2) Year Parts Warranty:

Conveyor Toaster Elements (metal sheathed)

Drawer Warmer Elements (metal sheathed)

Drawer Warmer Drawer Rollers and Slides

Strip Heater Elements (metal sheathed)

Display Warmer Elements (metal sheathed air heating)

Holding Cabinet Elements (metal sheathed air heating)

Heated Well Elements —HWB Series (metal sheathed)

b)One (1) Year Parts PLUS Four (4) Years Parts

Warranty on pro-rated terms that Hatco will explain

at Buyer’s request:

3CS and FR Tanks

c)Ten (10) Year Parts Warranty:

Electric Booster Heater Tanks

Gas Booster Heater Tanks

d)Ninety (90) Day Parts Warranty:

Replacement Parts

THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN

LIEU OF ANY OTHER WARRANTY, EXPRESSED OR

IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED

WARRANTY OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE OR PATENT OR OTHER

INTELLECTUAL PROPERTY RIGHT INFRINGEMENT.

Without limiting the generality of the foregoing, SUCH

WARRANTIES DO NOT COVER: Coated incandescent light

bulbs, fluorescent lights, heat lamp bulbs, coated halogen light

bulbs, halogen heat lamp bulbs, xenon light bulbs, LED light

tubes, glass components, and fuses; Product failure in booster

tank, fin tube heat exchanger, or other water heating equipment

caused by liming, sediment buildup, chemical attack, or

freezing; or Product misuse, tampering or misapplication,

improper installation, or application of improper voltage.

TION OF REMEDIES AND DAMAGES

Hatco’s liability and Buyer’s exclusive remedy hereunder will be

limited solely to replacement of part or Product using, at Hatco’s

option, new or refurbished parts or Product by Hatco or a Hatco-

authorized service agency with respect to any claim made

within the applicable warranty period referred to above. Hatco

reserves the right to accept or reject any such claim in whole or

in part. In the context of this Limited Warranty, “refurbished”

means a part or Product that has been returned to its original

specifications by Hatco or a Hatco-authorized service agency.

Hatco will not accept the return of any Product without prior

written approval from Hatco, and all such approved returns shall

be made at Buyer’s sole expense. HATCO WILL NOT BE

LIABLE, UNDER ANY CIRCUMSTANCES, FOR

CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING

BUT NOT LIMITED TO LABOR COSTS OR LOST PROFITS

RESULTING FROM THE USE OF OR INABILITY TO USE THE

PRODUCTS OR FROM THE PRODUCTS BEING

INCORPORATED IN OR BECOMING A COMPONENT OF

ANY OTHER PRODUCT OR GOODS.

Form No. FM2SSM_CN-0612

中文

使用者重要注意事项.............................................................13

简介......................................................................................13

重要安全说明........................................................................14

型号说明...............................................................................15

型号命名...............................................................................15

规格......................................................................................16

插头型式............................................................................16

电气参数表........................................................................16

尺寸...................................................................................16

安装......................................................................................17

总则...................................................................................17

操作......................................................................................18

总则...................................................................................18

控制面板............................................................................18

煮咖啡或沏茶.....................................................................18

煮水...................................................................................19

设定设备程序.....................................................................19

维护......................................................................................20

总则...................................................................................20

日常清理............................................................................20

去除水碱及矿物质沉积......................................................20

故障处理指南........................................................................21

服务信息...............................................................................22

全球有限质保........................................................................22

使用者重要注意事项

请在下列空白处记下本设备的型号、序列号、电压、和购买日

期（规格标签位于本设备背面）。致电Hatco要求服务帮助时

请提供上述信息。

型号____________________________________________

序列号__________________________________________

电压____________________________________________

购买日期______________________________________________

工作时间：北京时间上午9:00 – 下午6:00

电话：

E-mail:

传真：

(0512) 6732-5091

********************

(0512) 6732-5092

查询更多信息请访问我们的网站：

简介

HATCO大流量多功能咖啡花茶机是专为煮咖啡或沏茶并长时间

保持最佳温度而设计的。设备的控制面板上数字化显示冲泡模

式并显示冲泡周期或水加热完成。通过可编程控制按钮可以很

方便地冲泡咖啡，茶或烧水。

大流量多功能咖啡花茶机可以快速煮出2.3–7.0升（13-40杯）

咖啡，创造了家用或商用的多功能性。

HATCO大流量多功能咖啡花茶机质量优异，能够满足餐饮服务

业的需求，并保证多年正常工作，加热管元件有1年的防破损和

烧损质保。

大流量多功能咖啡花茶机是经过大量研究和实地测试考验的产

品。所选用材料经久耐用，外型美观，性能优异。每件产品在

出厂前都经过严格的检验和测试。

本手册包含了大流量多功能咖啡花茶机

的安装、安全和操作说明

。我们建议您在安装和使用

HATCO

多功能咖啡花茶机之前，请

仔细阅读本手册中的所有安装、操作和

安全说明。

本手册中的安全信息采用以下标志表示

：

则

可能导致

表示有危险情况，如果不加以避免，

警告”

“

人身伤亡。

表示有危险情况，如果不加以避免，则

可能导致

小心”

“

轻度或中度人身伤害。

用于提示不会涉及人身伤害的操作。

注意”

“

表号：FM2SSM_CN-0612

重要安全说明

使用本设备前，请仔细阅读下列重要安全事项，以免造成严重的人身伤亡及设备或财产的损坏。

中文

触电危险：

•将设备插头妥善插入有接地的电气插座内，插入前请核对电

压、规格和插头型式是否正确。如果插头和插座不匹配，请

和有正式资格的电工联系，以确定并安装电压和规格正确的

电气插座。

•关掉电源开关，拔掉电源线，并让设备冷却，然后再进行清

洗，调整或维护。

•不得将设备浸入水中。本设备不具备防水性能。如果设备被

水浸泡，不得进行操作。

•本设备不具备耐候性。请将本设备置于室内，室内气温不得

低于21°C (70°F)。

•不得用蒸汽或使用过多的水清洁本设备。

•本设备不具备“防喷淋”结构。

请勿使用喷淋头清洁本设备。

•请勿用电源线拖拽本设备。

燃烧危险：

•本设备的某些外表面处温度较高。接触这些部位时请务

必小心。

•设备的热水可能会灼伤人体。在排水或清洁前，请先将设备

冷却。

•请确保煮咖啡前将盖子盖到位盖牢。热水和泄露的蒸汽在沏

煮过程中会引发烫伤。

•禁止在设备内装有任何高温液体的情况下搬动或移动设备。

关掉设备让其充分冷却之后再搬动或清洁。

将本设备置于台面高度适宜、且使用方便的位置。放置位置

应水平，以防止本设备或其部件以外落地，并有足够的强度

支撑本设备及其部件的重量。

•如果电源线出现磨损，请停止使用。

•严禁将电源线悬挂在台面边缘。

•注水时请关闭电源并防止溅洒。

只能使用非磨砂清洁剂和擦拭布。否则可能会刮伤设备的外涂

层，损伤表面使之容易积灰。

插上电源或进行操作之前请确保机内液位高于2升 (.5 加仑)。

机内液位低于2升 (.5加仑)操作会导致设备过热。

请只往设备中加入冷水。

•请勿试图维修或更换损坏的电源线。电源线必须由

Hatco、Hatco授权服务机构或具备类似资格的人

负责更换。

•维修时只能使用正宗的Hatco更换零部件。未使用正宗

Hatco更换零部件会造成质保无效，并可能造成设备操作人

员受到有害电压威胁，并引起触电或着火。正宗Hatco 更

换零部件可以保证使用环境下的安全生产。某些普通零部件

不具备相关特性，从而无法在Hatco设备内安全使用。

设备都配备了高温温控安全开关，如果设备过热，将断开电源

。在操作之前让设备冷却并重新注满水。

确保所有操作人员都已了解如何安全和妥善地使用本设备。

儿童或具有身体、感觉或智力残障的人不宜使用本设备。请看

护好儿童，并使其远离本设备。

本设备不含“用户维修”零部件。如需维修，请联系Hatco 授权

服务机构或Hatco服务部门，电话(0512) 6732-5091；

传真(0512) 6732-5092

。

表号：FM2SSM_CN-0612

中文

型号为FM2SS-7的FLOWMAX 多功能咖啡花茶机配备有数字控

制面板，该面板上包含两个可编程冲泡循环和可编程水加热循

环。数字温度显示屏可显示温度，操作程序和冲泡时间。控制

面板上的加热和待机指示灯，以及玻璃液面管显示设备中的盛

物和现状。

其它标准配置包括下翻式把手，一个带锁扣的盖子，一个密封

的不锈钢内胆可以一次性供给2.3–7.0升（13-40杯）的咖啡。

内部部件包括一个盛料篮、花洒和抽水管组件——以上部件全部

适于洗碗碟机清洗。配备的1829mm(72英寸)的电源线和插

头符合安全标准。

FM2SS-7型号在不锈钢内胆内装备了两只加热管。外面的圈状

加热管在真正的沏煮程序开始之前对水进行预加热。中央的滤

井内的圆顶型加热器提供沏煮过程中所需的热量。

型号说明