2024年10月15日发(作者：宝痴柏)

Agilent ADNK-2623

Description

Agilent Technologies and

Cypress Semiconductor have

once again collaborated efforts to

produce a new optical mouse

reference design kit. Based on

the new compact Agilent

ADNS-2620 optical mouse sensor

and the powerful Cypress

CY7C63723 enCoRe™ USB

microcontroller, this reference

design kit provides a low cost

and yet, feature-rich solution in

one neat package.

The Agilent ADNS-2620 optical

mouse sensor is a new small form

factor, entry-level sensor built

with performance features. This

part enables more compact

designs and performance

enhancements. Housed in an 8-pin

package, this sensor has program-

mable features such as frame

speeds (from 500 to 2300fps),

automatic power conservation

when idle, and LED strobing for

lower power consumption,

enhancing navigation perfor-

mance. With an open serial

interface, it can communicate

with most common

microcontrollers.

Optical Mouse Designer’s Kit

Product Overview

Features

•Complete optical mouse reference

design kit

•New Agilent ADNS-2620 optical

mouse sensor

•Precise optical navigation technol-

ogy for smoother and accurate

surface navigation

•No mechanical moving parts for

easy maintenance and high

The Cypress enCoRe CY7C63723

reliability

is a revolutionary chip that

integrates numerous common

•Programmable frame speed up to

components, including break-

2300 frames per second (fps)

through crystal-less oscillator.

•

High speed motion detector

The result is an overall reduction

withaccurate motion up to

in board components and re-

12inches-per-second (ips) and

duced system cost. The EPROM

400counts-per-inch (cpi) resolution

based microcontroller allows

easy firmware modification, as

•Open serial interface for communi-

well as storage of Vendor and

cation with microcontrollers

Product ID™s without an exter-

•Power conservation mode during

nal EEPROM.

times of no movement

This kit is connectable to a PC

•Serial port registers for program-

via the USB or PS/2 ports. A

ming and data transfer

single cable with a USB connec-

•Cypress enCoRe™ CY7C63723 USB

tor and a PS/2 adapter is also

controller

provided. The design automati-

cally detects the type of interface

•USB and PS/2 interface combina-

is attached, allowing further

tion for PC connection

development of a USB or PS/2

•Proprietary 8-bit RISC processor,

only mouse.

USB and PS/2-optimized inter-

faces for high system performance

•8K Bytes of internal EPROM

provided to enable easy

customization of firmware and

lower cost

•Conforms to USB suspend mode

specifications

0.1 µF

11

VDD

VDD

D+

D-

1.3 KΩ

GND

GND

SHLD

VDDVDD

QB

QA

7

13

12

8

5

14

Vpp

D+

D-

Vreg

4.7 µF

0.1 µF

7

V

DD

Internal

Image

Sensor

HDNS

2100

Lens

R1

100K ohms

HLMP-ED80-KP000

SURFACE

6

GND

LED_CNTL

5

1K ohms

2N3906

P0.5

17

16

15

4

L

3

M

2

R

Buttons

6

3

C

Y

P

R

E

S

S

C

Y

7

C

6

3

7

2

3

C

-

P

C

SDIO

A

D

N

S

-

2

6

2

0

P1.0

P1.1

P0.6

P0.7

P0.3

P0.2

OSC_IN

1

Ceramic Resonaator

24

AVX

MHz

KBR-24.0-MSA

Murata

CSAL24M0X040

2.2 µF

4

SCK

OSC_OUT

2

R Ω

1

Z LED

REFA

8

P0.0

P0.1

VSS

XTALOUT

10

XTALIN

9

6 MHz

(Optional)

HLMP-ED80

Bin

K

L

M

N

P

Q

R

S

T

R1 Value

(Ohms)

32.0

32.0

32.0

32.0

32.0 to 61.2

32.0 to 73.9

32.0 to 84.4

32.0 to 103

32.0 to 130

Figure 1. Circuit block diagram for ADNK-2623 designer’s kit optical mouse using the Agilent ADNS-2620 optical mouse sensor and

CypressCY7C63723 enCoRe Controller.

Sensor

PCB

Lens/Light Pipe

Clip

LED

Base Plate

Surface

Figure 2. Sectional view of PCB assembly highlighting optical mouse components (optical mouse sensor, clip,

lens, LED, PCB and base plate).

2

Kit Components

This designer’s kit contains the following components:

Part Number

ADNK-2623

Description

Optical Mouse Reference Design Unit

Includes:

• Agilent ADNS-2620 optical mouse sensor

• Cypress CY7C63723 enCoRe USB controller

Name

Reference

Design Unit

Quantity

1

ADNS-2620

CY7C63723-PC

HDNS-2100

HDNS-2100#001

HDNS-2200

HDNS-2200#001

Optical Mouse Sensor

Cypress USB Controller

Round Lens Plate

Trimmed Lens Plate

LED Assembly Clip (Black)

LED Assembly Clip (Transparent)

Sensor

USB Controller

Lens

Lens

LED Clip

LED Clip

LED

5

5

5

5

5

5

5

1

HLMP-ED80-KP000639 nm T1

3

/

4

(5mm) Diameter LED

ADNK-2623

CD-ROM

Includes Documentation and Support Files

for ADNK-2623

• Documentation

-2620 Data Sheet

7C63723 Data Sheet

-2100 Data Sheet

-2200 Data Sheet

-ED80-XXXXX Data Sheet

ation Note 1282

• Hardware Support Files

-2623 BOM List

-2623 Schematic

Plate Feature IGES File

• Software Support Files

ontroller Firmware

Cypress LAB™

CD-ROM

Includes Development Tools and Support Files

for CY7C63723-PC

• CY Debugger

• CYASM Assembler Software

• Code Examples

• Users Manual

1

3

Ordering Information

For ordering information, please

contact your local Agilent sales

representative.

At Cypress call (800) 541-4736 or

(408) 943-2821 or visit the web

site at

At Agilent call (800) 235-0312

or visit the web site at

/semiconductors

/semiconductors

For product information and a complete list of

distributors, please go to our web site.

For technical assistance call:

Americas/Canada: +1 (800) 235-0312 or

(916) 788-6763

Europe: +49 (0) 6441 92460

China: 10800 650 0017

Hong Kong: (65) 6756 2394

India, Australia, New Zealand: (65) 6755 1939

Japan: (+81 3) 3335-8152(Domestic/International), or

0120-61-1280(Domestic Only)

Korea: (65) 6755 1989

Singapore, Malaysia, Vietnam, Thailand, Philippines,

Indonesia: (65) 6755 2044

Taiwan: (65) 6755 1843

Data subject to change.

Copyright © 2003 Agilent Technologies, Inc.

Obsoletes 5988-9163EN

July 3, 2003

5988-9845EN

2024年10月15日发(作者：宝痴柏)

Agilent ADNK-2623

Description

Agilent Technologies and

Cypress Semiconductor have

once again collaborated efforts to

produce a new optical mouse

reference design kit. Based on

the new compact Agilent

ADNS-2620 optical mouse sensor

and the powerful Cypress

CY7C63723 enCoRe™ USB

microcontroller, this reference

design kit provides a low cost

and yet, feature-rich solution in

one neat package.

The Agilent ADNS-2620 optical

mouse sensor is a new small form

factor, entry-level sensor built

with performance features. This

part enables more compact

designs and performance

enhancements. Housed in an 8-pin

package, this sensor has program-

mable features such as frame

speeds (from 500 to 2300fps),

automatic power conservation

when idle, and LED strobing for

lower power consumption,

enhancing navigation perfor-

mance. With an open serial

interface, it can communicate

with most common

microcontrollers.

Optical Mouse Designer’s Kit

Product Overview

Features

•Complete optical mouse reference

design kit

•New Agilent ADNS-2620 optical

mouse sensor

•Precise optical navigation technol-

ogy for smoother and accurate

surface navigation

•No mechanical moving parts for

easy maintenance and high

The Cypress enCoRe CY7C63723

reliability

is a revolutionary chip that

integrates numerous common

•Programmable frame speed up to

components, including break-

2300 frames per second (fps)

through crystal-less oscillator.

•

High speed motion detector

The result is an overall reduction

withaccurate motion up to

in board components and re-

12inches-per-second (ips) and

duced system cost. The EPROM

400counts-per-inch (cpi) resolution

based microcontroller allows

easy firmware modification, as

•Open serial interface for communi-

well as storage of Vendor and

cation with microcontrollers

Product ID™s without an exter-

•Power conservation mode during

nal EEPROM.

times of no movement

This kit is connectable to a PC

•Serial port registers for program-

via the USB or PS/2 ports. A

ming and data transfer

single cable with a USB connec-

•Cypress enCoRe™ CY7C63723 USB

tor and a PS/2 adapter is also

controller

provided. The design automati-

cally detects the type of interface

•USB and PS/2 interface combina-

is attached, allowing further

tion for PC connection

development of a USB or PS/2

•Proprietary 8-bit RISC processor,

only mouse.

USB and PS/2-optimized inter-

faces for high system performance

•8K Bytes of internal EPROM

provided to enable easy

customization of firmware and

lower cost

•Conforms to USB suspend mode

specifications

0.1 µF

11

VDD

VDD

D+

D-

1.3 KΩ

GND

GND

SHLD

VDDVDD

QB

QA

7

13

12

8

5

14

Vpp

D+

D-

Vreg

4.7 µF

0.1 µF

7

V

DD

Internal

Image

Sensor

HDNS

2100

Lens

R1

100K ohms

HLMP-ED80-KP000

SURFACE

6

GND

LED_CNTL

5

1K ohms

2N3906

P0.5

17

16

15

4

L

3

M

2

R

Buttons

6

3

C

Y

P

R

E

S

S

C

Y

7

C

6

3

7

2

3

C

-

P

C

SDIO

A

D

N

S

-

2

6

2

0

P1.0

P1.1

P0.6

P0.7

P0.3

P0.2

OSC_IN

1

Ceramic Resonaator

24

AVX

MHz

KBR-24.0-MSA

Murata

CSAL24M0X040

2.2 µF

4

SCK

OSC_OUT

2

R Ω

1

Z LED

REFA

8

P0.0

P0.1

VSS

XTALOUT

10

XTALIN

9

6 MHz

(Optional)

HLMP-ED80

Bin

K

L

M

N

P

Q

R

S

T

R1 Value

(Ohms)

32.0

32.0

32.0

32.0

32.0 to 61.2

32.0 to 73.9

32.0 to 84.4

32.0 to 103

32.0 to 130

Figure 1. Circuit block diagram for ADNK-2623 designer’s kit optical mouse using the Agilent ADNS-2620 optical mouse sensor and

CypressCY7C63723 enCoRe Controller.

Sensor

PCB

Lens/Light Pipe

Clip

LED

Base Plate

Surface

Figure 2. Sectional view of PCB assembly highlighting optical mouse components (optical mouse sensor, clip,

lens, LED, PCB and base plate).

2

Kit Components

This designer’s kit contains the following components:

Part Number

ADNK-2623

Description

Optical Mouse Reference Design Unit

Includes:

• Agilent ADNS-2620 optical mouse sensor

• Cypress CY7C63723 enCoRe USB controller

Name

Reference

Design Unit

Quantity

1

ADNS-2620

CY7C63723-PC

HDNS-2100

HDNS-2100#001

HDNS-2200

HDNS-2200#001

Optical Mouse Sensor

Cypress USB Controller

Round Lens Plate

Trimmed Lens Plate

LED Assembly Clip (Black)

LED Assembly Clip (Transparent)

Sensor

USB Controller

Lens

Lens

LED Clip

LED Clip

LED

5

5

5

5

5

5

5

1

HLMP-ED80-KP000639 nm T1

3

/

4

(5mm) Diameter LED

ADNK-2623

CD-ROM

Includes Documentation and Support Files

for ADNK-2623

• Documentation

-2620 Data Sheet

7C63723 Data Sheet

-2100 Data Sheet

-2200 Data Sheet

-ED80-XXXXX Data Sheet

ation Note 1282

• Hardware Support Files

-2623 BOM List

-2623 Schematic

Plate Feature IGES File

• Software Support Files

ontroller Firmware

Cypress LAB™

CD-ROM

Includes Development Tools and Support Files

for CY7C63723-PC

• CY Debugger

• CYASM Assembler Software

• Code Examples

• Users Manual

1

3

Ordering Information

For ordering information, please

contact your local Agilent sales

representative.

At Cypress call (800) 541-4736 or

(408) 943-2821 or visit the web

site at

At Agilent call (800) 235-0312

or visit the web site at

/semiconductors

/semiconductors

For product information and a complete list of

distributors, please go to our web site.

For technical assistance call:

Americas/Canada: +1 (800) 235-0312 or

(916) 788-6763

Europe: +49 (0) 6441 92460

China: 10800 650 0017

Hong Kong: (65) 6756 2394

India, Australia, New Zealand: (65) 6755 1939

Japan: (+81 3) 3335-8152(Domestic/International), or

0120-61-1280(Domestic Only)

Korea: (65) 6755 1989

Singapore, Malaysia, Vietnam, Thailand, Philippines,

Indonesia: (65) 6755 2044

Taiwan: (65) 6755 1843

Data subject to change.

Copyright © 2003 Agilent Technologies, Inc.

Obsoletes 5988-9163EN

July 3, 2003

5988-9845EN