2024年10月18日发(作者：阴桐)
®
HOME THEATER
IN-WALL SERIES
HTI6, HTI8, HTI55 and
HTI6C
OWNER’S GUIDE
THANK YOU FOR CHOOSING JBL
For more than 50 years, JBLWe’re confident that the
has been involved in everyJBL loudspeakers you have
aspect of music and filmchosen will provide every note
recording and reproduction,of enjoyment that you
from live performances toexpected – and that when you
monitoring the recordings youthink about purchasing addi-
play in your home, tional audio equipment for
car or home, car or office, you
will once again choose JBL.
INCLUDED
HTI6,HTI8
One pair of speakers with grilles.
HTI55
One loudspeaker with grille.
Logo to be attached to grille
depending on vertical or
horizontal installation.
HTI6C
One pair of speakers with grilles.
2
Please take a moment to
register your product on our
Web site at . It
enables us to keep you posted
on our latest advancements,
and helps us to better under-
stand our customers and build
products that meet their needs
and expectations.
JBLConsumer Products
Template/paint shield
(punch out at perforation).
Template/paint shield
(punch out at perforation).
Template/paint shield
(punch out at perforation).
SPEAKER PLACEMENT
Front Speakers (HTI6,HTI8,HTI55)
40
0
– 60
0
Models HTI6,HTI8 and HTI55 as Rear Speakers
5 – 6 ft.
WALLWALL
WALLWALL
Model HTI6C in Ceiling
be placed at about the same
height from the floor as the
listeners’ ears will be, with the
tweeters aimed toward the
listening position at ear-level
height.
Model HTI55 is suitable for the
front left, center and right posi-
tions, and it may also be used
as a side surround or surround
back speaker. It may be
mounted horizontally or verti-
cally, but make sure to position
it so that the tweeters for all of
the front speakers are at the
same height (or differ by no
more than 2 feet). You may
rotate the tweeter to correctly
orient the JBL logo.
In a home theater configura-
tion, the two surround speakers
should be placed slightly
behind the listening position
and, ideally, should face each
other and be at a level higher
than the listeners’ ears. If that
is not possible, they may be
placed in a wall behind the lis-
tening position, facing forward.
The rear wall is the required
mounting position for the sur-
round back speakers in 6.1- and
7.1-channel system. The sur-
round speakers should not call
attention to themselves. They
should provide a diffuse, ambi-
ent sound accompanying the
main program material heard in
the front speakers. In Dolby*
Digital and DTS
®
systems, aim
the tweeters toward the listen-
ing position at ear-level height.
Proper placement of the
speakers is an important step
in obtaining the most realistic
soundstage possible. These
recommendations are for the
optimum placement of the loud-
speakers. Use these placement
recommendations as a guide.
Slight variations will not dimin-
ish your listening pleasure.
The front speakers should be
placed the same distance from
each other as they are from the
listening position. They should
3
SPEAKER CONNECTIONS
Connection Tips
The wires for both speakers
should be the same length. If
one speaker is placed closer
to the amplifier than the other,
hide the excess wire behind
the wall.
LEFT
RIGHT
LEFT RIGHT
Front or Rear Speaker Outputs
Wire LengthRecommended Size
Up to 20 ft.16 gauge
Up to 30 ft.12 gauge
Greater than 30 ft.10 gauge
INSTALLATION
The JBL HTISeries in-wall
Tools Needed
speakers weredesigned to be
easily installed. However, if
you are unsure of your ability
to properly install these loud-
speakers, please contact your
Pencil
dealer or a qualified installer.
Measuring tape
Carpenter’s level
4
Speakers and electronics
terminals have corresponding
(+) and (–) terminals. Most
manufacturers of speakers and
electronics, including JBL, use
red to denote the (+) terminal
and black for the (–) terminal.
It is important to connect both
speakers identically: (+) on the
speaker to (+) on the amplifier
and (–) on the speaker to (–)
on the amplifier. Wiring “out
of phase” results in thin sound,
weak bass and a poor stereo
image. With the advent of multi-
channel surround-sound
systems, connecting all of
the speakers in your system
with the correct polarity
remains equally important in
order to preserve the proper
ambience and directionality
of the program material.
Phillips #2 screwdriver
Utility knife
Awl
EXISTING CONSTRUCTION
HTI6,HTI8,HTI55
Remove the grille from the
speaker frame by pulling on the
paper tab. If the tab is missing,
to avoid scratching the grille or
baffle you may unfold a paper
clip, insert the straight end
through one of the holes in the
grille, and gently pull up.
Cut the drywall.
Screw down each of the four
(six for HTI55) Phillips head
screws. The locking tabs will
swivel into place and secure
the unit to the rear surface of
the drywall.
Level
Template
Determine the correct speaker
location.
Note:
Remove the inner tem-
plate, which is the paint shield,
at the perforation. Use the outer
template when cutting the dry-
wall. Although the HTI55 may
be oriented either horizontally
or vertically, the installation
procedure is the same.
Connect the speaker wires
to the speaker.
The HTI speakers feature
unique swivel mounts for the
tweeters that enable you to
aim the very directional high
frequencies toward the
listening position, at ear-level
height. Before installing the
speaker grille, gently press on
the outer edge of the tweeter
mount to adjust the position of
the tweeter. The tweeter will
not swivel more than 15
degrees in any direction; do
not attempt to force it to move
further. You may also rotate the
tweeter to orient the JBL logo
as desired.
≥1/2"
≥1/2"
≥1/2"
Note:
Always allow at least
one-half inch between a wall
stud and the speaker cutout or
the locking tabs will not be able
to swivel into place.
Place the frame assembly
in the wall.
Replace the metal grille. For the
HTI55 only, attach the JBL logo
to the grille to correspond to
vertical or horizontal installation.
5
EXISTING CONSTRUCTION
HTI6C
Remove the grille from the
speaker frame by pulling on the
paper tab. If the tab is missing,
to avoid scratching the grille or
baffle you may unfold a paper
clip, insert the straight end
through one of the holes in the
grille, and gently pull up.
Connect the speaker wires
to the speaker.
The HTI speakers feature
unique swivel mounts for the
tweeters that enable you to
aim the very directional high
frequencies toward the
listening position, at ear-level
height. Before installing the
speaker grille, gently press on
the outer edge of the tweeter
mount to adjust the position of
the tweeter. The tweeter will
not swivel more than 15
degrees in any direction; do
not attempt to force it to move
further. You may also rotate
the tweeter to orient the JBL
logo as desired.
6
≥1/2"
≥1/2"
≥1/2"
Determine the correct speaker
location.
Note:
Remove the
inner template, which is the
paint shield, at the perforation.
Use the outer template when
cutting the drywall.
Place the frame assembly
in the wall.
Replace the metal grille.
Cut the drywall.
Note:
Always allow at least one-half
inch between a wall stud and
the speaker cutout or the lock-
ing tabs will not be able to
swivel into place.
Screw down each of the three
Phillips head screws. The locking
tabs will swivel into place and
secure the unit to the rear surface
of the drywall.
NEW CONSTRUCTION
You will need to purchase the correct rough-in frame kit for your model:
Speaker ModelRough-in Frame Kit
HTI6RIF6
HTI8RIF8
HTI55RIF55
HTI6CRIF6C
Detailed installation instructions are supplied with the rough-in kit.
PAINTING THE SPEAKER
FRAME AND GRILLE
JBL HTI Series loudspeakersprotect the speaker components
can be painted to match anyand baffle from paint residue.
decor. If you wish to changeUse a high-quality spray paint,
their color, the satin finish on theand apply a thin coat of color.
grille and frame will function as
Be certain the grille
a primer coat. Before painting,
perforations remain
install the paint shield (in the
free of g
assembly kit) securely into the
them with paint will
diminish the sound
recess in the baffle. This will
quality.
TROUBLESHOOTING
If there is no sound
In multichannel applications,
from any of the
speakers:
make sure that your receiver or
processor has been configured
• Check that receiver/amplifier
to enable all channels that you
is on and a source is playing.
are using.
• Check all wires and connections
between receiver/amplifier and
If there is low (or no)
speakers. Make sure all wires
bass output:
are connected. Make sure none
• Make sure the connections
of the speaker wires are frayed,
to the left and right “Speaker
cut or punctured.
Inputs” have the correct polarity
• Review proper operation of
(+ and –).
your receiver/amplifier.
• Consider adding a powered
subwoofer to your system.
If there is no sound
coming from one
• In Dolby Digital or DTSmodes,
speaker:
make sure your receiver/proces-
soris correctly configured. When
• Check the “Balance” control
using a subwoofer, make sure
on your receiver/amplifier.
the subwoofer output of the
• Check all wires and connec-
receiver/processor has been
tions between receiver/amplifier
enabled. If no subwoofer is
and speakers. Make sure all
being used, make sure the
wires are connected. Make sure
left and right front and rear
none of the speaker wires
speakers have been config-
are frayed, cut or punctured.
ured as “LARGE.” See your
Note:
Gently remove the
acousticalfoam blanket from the
grille before painting. Reattach
the blanket after the paint has
dried.
receiver/processor’s owner’s
manual for futher information on
correct speaker configuration in
Dolby Digital, DTS and other
surround-sound modes.
If the system plays at
low volumes but shuts
off as volume is
increased:
• Check all wires and connec-
tions between receiver/amplifier
and speakers. Make sure all
wires are connected. Make sure
none of the speaker wires are
frayed, cut or punctured.
• If more than one pair of main
speakers is being used, check the
minimum-impedance require-
ments of your receiver/amplifier.
7
SPECIFICATIONS
HTI6
Frequency Response
38Hz – 20kHz (–10dB)
Recommended
Maximum Amplifier
Power
†
100 watts
Impedance
8 ohms nominal
Sensitivity
88dB (2.83V/1m)
Crossover Frequency
2,500Hz
Woofer
6-1/2" Polymer-coated aluminum
cone w/rubber surround
Tweeter
1"Pure-titanium dome,
w/Elliptical Oblate Spheroidal
™
(EOS) waveguide, and swivel mount
Plate Size (W x H)
8-1/2" x 11" (216mm x 279mm)
Mounting Cutout Size
(W x H)
7-1/8" x 9-11/16" (181mm x 246mm)
Mounting Depth
3-7/8" (98mm)
Weight per Speaker
11 lb (5kg)
HTI8
Frequency Response
30Hz – 20kHz (–10dB)
Recommended
Maximum Amplifier
Power
†
120 watts
Impedance
8 ohms nominal
Sensitivity
90dB (2.83V/1m)
Crossover Frequency
2,500Hz
Woofer
8" Polymer-coated aluminum
cone w/rubber surround
Tweeter
1"Pure-titanium dome,
w/Elliptical Oblate Spheroidal
™
(EOS) waveguide, and swivel mount
Plate Size (W x H)
10-1/8" x 13-1/8" (257mm x 333mm)
Mounting Cutout Size
(W x H)
8-7/8" x 11-13/16" (225mm x 300mm)
Mounting Depth
4" (102mm)
Weight per Speaker
13.5 lb (6.1kg)
HTI55
Frequency Response
40Hz – 20kHz (–10dB)
Recommended
Maximum Amplifier
Power
†
120 watts
Impedance
8 ohms nominal
Sensitivity
88dB (2.83V/1m)
Crossover Frequency
2,000Hz
Woofer
Dual 5" polymer-coated aluminum
cone w/rubber surround
Tweeter
1"Pure-titanium dome,
w/Elliptical Oblate Spheroidal
™
(EOS) waveguide, and swivel mount
Plate Size
15-3/8" x 7-1/2" (391mm x 191mm)
Mounting Cutout Size
14" x 6" (356mm x 152mm)
Mounting Depth
3-7/8" (98mm)
Weight per Speaker
5.7 lb (2.6kg)
HTI6C
Frequency Response
40Hz – 20kHz (–10dB)
Recommended
Maximum Amplifier
Power
†
100 watts
Impedance
8 ohms nominal
Sensitivity
88dB (2.83V/1m)
Crossover Frequency
2,000Hz
Woofer
6-1/2" Polymer-coated aluminum
cone w/rubber surround
Tweeter
1"Pure-titanium dome,
w/swivel mount
Plate Size (Diameter)
9-3/16" (233mm)
Mounting Cutout Size
(Diameter)
7-7/8" (200mm)
Mounting Depth
4-1/4" (108mm)
Weight per Speaker
10 lb (4.5kg)
All features and specifications are subject to
change without notice.
†The maximum recommended amplifier power
rating will ensure proper system headroom to
allow for occasional peaks. We do not recom-
mend sustained operation at these maximum
power levels.
*Dolby is a trademark of Dolby Laboratories.
DTS is a registered trademark of
Digital Theater Systems, Inc.
Declaration of Conformity
We, Harman Consumer International
2, route de Tours
72500 Chateau-du-Loir
France
declare in own responsibility that the products described in this
owner’s manual are in compliance with technical standards:
EN 61000-6-3:2001
EN 61000-6-1:2001
Gary Mardell
Harman Consumer International
Chateau-du-Loir, France 4/04
OWNER’S GUIDE
PRODUCTLINE:
PRO SOUND
COMES HOME
™
JBL Consumer Products
250 Crossways Park Drive, Woodbury, NY 11797
8500 Balboa Boulevard, Northridge, CA 91329
516.255.4JBL(4525)
NOTE:
For new-construction applications, be sure
to purchase the correct rough-in frame kit.
JBL Home Theater In-Wall Series
MODELS:
HTI6,HTI8,HTI55 and HTI6C
DESIGN GOAL:
Combine the superior performance of traditional
JBL loudspeakers with the convenience of in-wall installation.
TWEETER TYPE:
Pure-titanium dome with EOS
™
waveguide,
Polymer-coated aluminum cone with rubber surround
(SSP)
and swivel mount
WOOFER TYPE:
© 2004 Harman International Industries, Incorporated
JBL is a registered trademark of Harman International
Industries, Incorporated.
Part No.406-000-05033
CROSSOVER NETWORK:
Straight-Line Signal Path
™
PROFESSIONAL REFERENCE:
Studio Monitor
2024年10月18日发(作者：阴桐)
®
HOME THEATER
IN-WALL SERIES
HTI6, HTI8, HTI55 and
HTI6C
OWNER’S GUIDE
THANK YOU FOR CHOOSING JBL
For more than 50 years, JBLWe’re confident that the
has been involved in everyJBL loudspeakers you have
aspect of music and filmchosen will provide every note
recording and reproduction,of enjoyment that you
from live performances toexpected – and that when you
monitoring the recordings youthink about purchasing addi-
play in your home, tional audio equipment for
car or home, car or office, you
will once again choose JBL.
INCLUDED
HTI6,HTI8
One pair of speakers with grilles.
HTI55
One loudspeaker with grille.
Logo to be attached to grille
depending on vertical or
horizontal installation.
HTI6C
One pair of speakers with grilles.
2
Please take a moment to
register your product on our
Web site at . It
enables us to keep you posted
on our latest advancements,
and helps us to better under-
stand our customers and build
products that meet their needs
and expectations.
JBLConsumer Products
Template/paint shield
(punch out at perforation).
Template/paint shield
(punch out at perforation).
Template/paint shield
(punch out at perforation).
SPEAKER PLACEMENT
Front Speakers (HTI6,HTI8,HTI55)
40
0
– 60
0
Models HTI6,HTI8 and HTI55 as Rear Speakers
5 – 6 ft.
WALLWALL
WALLWALL
Model HTI6C in Ceiling
be placed at about the same
height from the floor as the
listeners’ ears will be, with the
tweeters aimed toward the
listening position at ear-level
height.
Model HTI55 is suitable for the
front left, center and right posi-
tions, and it may also be used
as a side surround or surround
back speaker. It may be
mounted horizontally or verti-
cally, but make sure to position
it so that the tweeters for all of
the front speakers are at the
same height (or differ by no
more than 2 feet). You may
rotate the tweeter to correctly
orient the JBL logo.
In a home theater configura-
tion, the two surround speakers
should be placed slightly
behind the listening position
and, ideally, should face each
other and be at a level higher
than the listeners’ ears. If that
is not possible, they may be
placed in a wall behind the lis-
tening position, facing forward.
The rear wall is the required
mounting position for the sur-
round back speakers in 6.1- and
7.1-channel system. The sur-
round speakers should not call
attention to themselves. They
should provide a diffuse, ambi-
ent sound accompanying the
main program material heard in
the front speakers. In Dolby*
Digital and DTS
®
systems, aim
the tweeters toward the listen-
ing position at ear-level height.
Proper placement of the
speakers is an important step
in obtaining the most realistic
soundstage possible. These
recommendations are for the
optimum placement of the loud-
speakers. Use these placement
recommendations as a guide.
Slight variations will not dimin-
ish your listening pleasure.
The front speakers should be
placed the same distance from
each other as they are from the
listening position. They should
3
SPEAKER CONNECTIONS
Connection Tips
The wires for both speakers
should be the same length. If
one speaker is placed closer
to the amplifier than the other,
hide the excess wire behind
the wall.
LEFT
RIGHT
LEFT RIGHT
Front or Rear Speaker Outputs
Wire LengthRecommended Size
Up to 20 ft.16 gauge
Up to 30 ft.12 gauge
Greater than 30 ft.10 gauge
INSTALLATION
The JBL HTISeries in-wall
Tools Needed
speakers weredesigned to be
easily installed. However, if
you are unsure of your ability
to properly install these loud-
speakers, please contact your
Pencil
dealer or a qualified installer.
Measuring tape
Carpenter’s level
4
Speakers and electronics
terminals have corresponding
(+) and (–) terminals. Most
manufacturers of speakers and
electronics, including JBL, use
red to denote the (+) terminal
and black for the (–) terminal.
It is important to connect both
speakers identically: (+) on the
speaker to (+) on the amplifier
and (–) on the speaker to (–)
on the amplifier. Wiring “out
of phase” results in thin sound,
weak bass and a poor stereo
image. With the advent of multi-
channel surround-sound
systems, connecting all of
the speakers in your system
with the correct polarity
remains equally important in
order to preserve the proper
ambience and directionality
of the program material.
Phillips #2 screwdriver
Utility knife
Awl
EXISTING CONSTRUCTION
HTI6,HTI8,HTI55
Remove the grille from the
speaker frame by pulling on the
paper tab. If the tab is missing,
to avoid scratching the grille or
baffle you may unfold a paper
clip, insert the straight end
through one of the holes in the
grille, and gently pull up.
Cut the drywall.
Screw down each of the four
(six for HTI55) Phillips head
screws. The locking tabs will
swivel into place and secure
the unit to the rear surface of
the drywall.
Level
Template
Determine the correct speaker
location.
Note:
Remove the inner tem-
plate, which is the paint shield,
at the perforation. Use the outer
template when cutting the dry-
wall. Although the HTI55 may
be oriented either horizontally
or vertically, the installation
procedure is the same.
Connect the speaker wires
to the speaker.
The HTI speakers feature
unique swivel mounts for the
tweeters that enable you to
aim the very directional high
frequencies toward the
listening position, at ear-level
height. Before installing the
speaker grille, gently press on
the outer edge of the tweeter
mount to adjust the position of
the tweeter. The tweeter will
not swivel more than 15
degrees in any direction; do
not attempt to force it to move
further. You may also rotate the
tweeter to orient the JBL logo
as desired.
≥1/2"
≥1/2"
≥1/2"
Note:
Always allow at least
one-half inch between a wall
stud and the speaker cutout or
the locking tabs will not be able
to swivel into place.
Place the frame assembly
in the wall.
Replace the metal grille. For the
HTI55 only, attach the JBL logo
to the grille to correspond to
vertical or horizontal installation.
5
EXISTING CONSTRUCTION
HTI6C
Remove the grille from the
speaker frame by pulling on the
paper tab. If the tab is missing,
to avoid scratching the grille or
baffle you may unfold a paper
clip, insert the straight end
through one of the holes in the
grille, and gently pull up.
Connect the speaker wires
to the speaker.
The HTI speakers feature
unique swivel mounts for the
tweeters that enable you to
aim the very directional high
frequencies toward the
listening position, at ear-level
height. Before installing the
speaker grille, gently press on
the outer edge of the tweeter
mount to adjust the position of
the tweeter. The tweeter will
not swivel more than 15
degrees in any direction; do
not attempt to force it to move
further. You may also rotate
the tweeter to orient the JBL
logo as desired.
6
≥1/2"
≥1/2"
≥1/2"
Determine the correct speaker
location.
Note:
Remove the
inner template, which is the
paint shield, at the perforation.
Use the outer template when
cutting the drywall.
Place the frame assembly
in the wall.
Replace the metal grille.
Cut the drywall.
Note:
Always allow at least one-half
inch between a wall stud and
the speaker cutout or the lock-
ing tabs will not be able to
swivel into place.
Screw down each of the three
Phillips head screws. The locking
tabs will swivel into place and
secure the unit to the rear surface
of the drywall.
NEW CONSTRUCTION
You will need to purchase the correct rough-in frame kit for your model:
Speaker ModelRough-in Frame Kit
HTI6RIF6
HTI8RIF8
HTI55RIF55
HTI6CRIF6C
Detailed installation instructions are supplied with the rough-in kit.
PAINTING THE SPEAKER
FRAME AND GRILLE
JBL HTI Series loudspeakersprotect the speaker components
can be painted to match anyand baffle from paint residue.
decor. If you wish to changeUse a high-quality spray paint,
their color, the satin finish on theand apply a thin coat of color.
grille and frame will function as
Be certain the grille
a primer coat. Before painting,
perforations remain
install the paint shield (in the
free of g
assembly kit) securely into the
them with paint will
diminish the sound
recess in the baffle. This will
quality.
TROUBLESHOOTING
If there is no sound
In multichannel applications,
from any of the
speakers:
make sure that your receiver or
processor has been configured
• Check that receiver/amplifier
to enable all channels that you
is on and a source is playing.
are using.
• Check all wires and connections
between receiver/amplifier and
If there is low (or no)
speakers. Make sure all wires
bass output:
are connected. Make sure none
• Make sure the connections
of the speaker wires are frayed,
to the left and right “Speaker
cut or punctured.
Inputs” have the correct polarity
• Review proper operation of
(+ and –).
your receiver/amplifier.
• Consider adding a powered
subwoofer to your system.
If there is no sound
coming from one
• In Dolby Digital or DTSmodes,
speaker:
make sure your receiver/proces-
soris correctly configured. When
• Check the “Balance” control
using a subwoofer, make sure
on your receiver/amplifier.
the subwoofer output of the
• Check all wires and connec-
receiver/processor has been
tions between receiver/amplifier
enabled. If no subwoofer is
and speakers. Make sure all
being used, make sure the
wires are connected. Make sure
left and right front and rear
none of the speaker wires
speakers have been config-
are frayed, cut or punctured.
ured as “LARGE.” See your
Note:
Gently remove the
acousticalfoam blanket from the
grille before painting. Reattach
the blanket after the paint has
dried.
receiver/processor’s owner’s
manual for futher information on
correct speaker configuration in
Dolby Digital, DTS and other
surround-sound modes.
If the system plays at
low volumes but shuts
off as volume is
increased:
• Check all wires and connec-
tions between receiver/amplifier
and speakers. Make sure all
wires are connected. Make sure
none of the speaker wires are
frayed, cut or punctured.
• If more than one pair of main
speakers is being used, check the
minimum-impedance require-
ments of your receiver/amplifier.
7
SPECIFICATIONS
HTI6
Frequency Response
38Hz – 20kHz (–10dB)
Recommended
Maximum Amplifier
Power
†
100 watts
Impedance
8 ohms nominal
Sensitivity
88dB (2.83V/1m)
Crossover Frequency
2,500Hz
Woofer
6-1/2" Polymer-coated aluminum
cone w/rubber surround
Tweeter
1"Pure-titanium dome,
w/Elliptical Oblate Spheroidal
™
(EOS) waveguide, and swivel mount
Plate Size (W x H)
8-1/2" x 11" (216mm x 279mm)
Mounting Cutout Size
(W x H)
7-1/8" x 9-11/16" (181mm x 246mm)
Mounting Depth
3-7/8" (98mm)
Weight per Speaker
11 lb (5kg)
HTI8
Frequency Response
30Hz – 20kHz (–10dB)
Recommended
Maximum Amplifier
Power
†
120 watts
Impedance
8 ohms nominal
Sensitivity
90dB (2.83V/1m)
Crossover Frequency
2,500Hz
Woofer
8" Polymer-coated aluminum
cone w/rubber surround
Tweeter
1"Pure-titanium dome,
w/Elliptical Oblate Spheroidal
™
(EOS) waveguide, and swivel mount
Plate Size (W x H)
10-1/8" x 13-1/8" (257mm x 333mm)
Mounting Cutout Size
(W x H)
8-7/8" x 11-13/16" (225mm x 300mm)
Mounting Depth
4" (102mm)
Weight per Speaker
13.5 lb (6.1kg)
HTI55
Frequency Response
40Hz – 20kHz (–10dB)
Recommended
Maximum Amplifier
Power
†
120 watts
Impedance
8 ohms nominal
Sensitivity
88dB (2.83V/1m)
Crossover Frequency
2,000Hz
Woofer
Dual 5" polymer-coated aluminum
cone w/rubber surround
Tweeter
1"Pure-titanium dome,
w/Elliptical Oblate Spheroidal
™
(EOS) waveguide, and swivel mount
Plate Size
15-3/8" x 7-1/2" (391mm x 191mm)
Mounting Cutout Size
14" x 6" (356mm x 152mm)
Mounting Depth
3-7/8" (98mm)
Weight per Speaker
5.7 lb (2.6kg)
HTI6C
Frequency Response
40Hz – 20kHz (–10dB)
Recommended
Maximum Amplifier
Power
†
100 watts
Impedance
8 ohms nominal
Sensitivity
88dB (2.83V/1m)
Crossover Frequency
2,000Hz
Woofer
6-1/2" Polymer-coated aluminum
cone w/rubber surround
Tweeter
1"Pure-titanium dome,
w/swivel mount
Plate Size (Diameter)
9-3/16" (233mm)
Mounting Cutout Size
(Diameter)
7-7/8" (200mm)
Mounting Depth
4-1/4" (108mm)
Weight per Speaker
10 lb (4.5kg)
All features and specifications are subject to
change without notice.
†The maximum recommended amplifier power
rating will ensure proper system headroom to
allow for occasional peaks. We do not recom-
mend sustained operation at these maximum
power levels.
*Dolby is a trademark of Dolby Laboratories.
DTS is a registered trademark of
Digital Theater Systems, Inc.
Declaration of Conformity
We, Harman Consumer International
2, route de Tours
72500 Chateau-du-Loir
France
declare in own responsibility that the products described in this
owner’s manual are in compliance with technical standards:
EN 61000-6-3:2001
EN 61000-6-1:2001
Gary Mardell
Harman Consumer International
Chateau-du-Loir, France 4/04
OWNER’S GUIDE
PRODUCTLINE:
PRO SOUND
COMES HOME
™
JBL Consumer Products
250 Crossways Park Drive, Woodbury, NY 11797
8500 Balboa Boulevard, Northridge, CA 91329
516.255.4JBL(4525)
NOTE:
For new-construction applications, be sure
to purchase the correct rough-in frame kit.
JBL Home Theater In-Wall Series
MODELS:
HTI6,HTI8,HTI55 and HTI6C
DESIGN GOAL:
Combine the superior performance of traditional
JBL loudspeakers with the convenience of in-wall installation.
TWEETER TYPE:
Pure-titanium dome with EOS
™
waveguide,
Polymer-coated aluminum cone with rubber surround
(SSP)
and swivel mount
WOOFER TYPE:
© 2004 Harman International Industries, Incorporated
JBL is a registered trademark of Harman International
Industries, Incorporated.
Part No.406-000-05033
CROSSOVER NETWORK:
Straight-Line Signal Path
™
PROFESSIONAL REFERENCE:
Studio Monitor