2024年10月30日发(作者：官颂)
Disassembly procedure
2
Disassembly Procedure
Please follow the information provided in this section to perform the complete
disassembly procedure of the notebook. Be sure to use proper tools described
before.
Chapter
A
The disassembly procedure consists of the following steps:
• Battery Module
• HDD Module
• Wireless Module
• Memory Module
• VGA Module
• CPU Module
• ODD Module
• Keyboard
• Top Case Module
• Motherboard
• Bottom case Module
• LCD Module
2-1
SUS A8SR Series Notebook consists of various modules. This chapter describes the
procedures for the complete notebook disassembly. In addition, in between procedures,
the detailed disassembly procedure of individual modules will be provided for your
service needs.
BATTERY
BATTERY
MODULE
REMOVAL
HDD
MODULE
HDD
MODULE
REMOVAL
Disassembly procedure
Battery Module
The illustration below shows how to remove the battery module.
1. Slide the battery latch and lift the battery away from the system.
HDD Module
The illustrations below show how to remove the HDD module from the notebook.
Removing HDD Module
1. Remove 1 screws (M2*5L(K)), then remove the HDD door.
M2*5L
2-2
WIRELESS
LAN
Disassembly procedure
2. Lift the HDD module and then remove it.
3. Remove 4 screws [M3 * 4L(K)] to separate HDD from HDD housing.
M3*4L
Wireless LAN Module
The illustration below shows how to remove the Wireless LAN module.
Remove WLAN
Disconnect the MAIN & AUX antenna.
2-3
Disassembly procedure
WLAN REMOVEL
And open the two latches to pop the MINI PCI MODULE up then pull it out.
MEMORY
MODULE
MEMORY
REMOVAL
Memory Module
The A8SR Series Notebook does not have RAM onboard. There is one SO-DIMM
sockets for installing SO-DIMM RAM. It can upgrade the total memory size up to 1GB .
Removing Memory module
1. Remove 4screws (M2*5L(K)), then remove the CPU door.
2. Open the 2 latches aside (No. 1, 2), which will pop the memory module up to an
angle of 30°, then pull out the memory module in that angle (No. 3).
1
3
30
o
2
2-4
Disassembly procedure
VGA BOARD
MODULE
VGA Board Module
The illustrations below show how to remove the VGABoard module from the notebook.
Remove VGA board module
VGA BOARD
REMOVAL
1. Remove 4 screws (M2*5L(K)),then remove the VGA board module
CPU MODULE
CPU Module
The illustrations below show how to remove the CPU module from the notebook.
Removing CPU Module
CPU
REMOVAL
1. Remove 5 screws (M2*5L(K)) by order,.
5
M2*5L
32
1
4
2-5
Disassembly procedure
2. Disconnect the Fan cable then take away the CPU thermal module.
3. Turn the non-removable screw here 180 degrees counter-clockwise to loosen the
CPU.
L
O
Unlock
4. Squeeze the vacuum handling pump and use it to lift the CPU away.
2-6
OPTICAL
DRIVE
DEVICE
ODD
REMOVAL
Disassembly procedure
ODD Module
The illustration below shows how to remove the ODD module.
1. Remove 2 screws (M2*5L(K))
M2*5L
2. Push the ODD Module out by a pair of tweezers.
2-7
Disassembly procedure
KEYBOARD
Keyboard
The illustration of below shows how to remove the keyboard.
Removing Keyboard
K/B REMOVAL
1. Push the 4 latches in (No.1, No.2, No.3, No.4) with a pair of tweezers or a
single-slotted screwdriver and lift the keyboard plate up.
1 4 2 3
2. Lay the keyboard down over the Top case. *Do not remove the keyboard yet.
The keyboard cable is still attached.
3. Disconnect the FPC connector by a pair of tweezers, and remove keyboard plate
from top case.
2-8
Disassembly procedure
CABLE
REMOVAL
Removing Keyboard Cable
1. Use a flexible connector tool to unlock the cable connector on both ends (no. 1).
2. Carefully pull out the keyboard cable (no. 2) with a pair of tweezers.
3. Lock the connector (no. 3) again to avoid possible breakage.
2. Cable out
1. Unlock
1. Unlock
3.
3.
TOP CASE
MODULE
Top Case Module
The illustrations below show how to disassemble and remove the top case module of the notebook.
The module contains the top case itself.
Removing top Case Module
TOP CASE
DISAMMEMBL
1. Remove both hinge covers.
2. Disconnect the touchpad FFC from the top case.
2-9
Disassembly procedure
Touchpad FFC
3. Disconnect the camera cable from the LCD module.
4. Turn over the NB and remove the screw.
5. Remove the LCD cable cover
2-10
Disassembly procedure
6 .Remove two screws (M2*5L(K))then disconnect the Coaxial & inverter cable.
M2*5L
Coaxial cable
Inverter cable
7. Separate the antenna from the bottom case.
2-11
Disassembly procedure
8. Remove 2 screws on both hinges.
9. Turn over the NB and remove 2 screws here.
10. Separate the LCD module from the Top Case module
2-12
Disassembly procedure
BOTTOM
CASE
REMOVAL
11. Turn over the NB and remove 17 screws (M2*5L(K)) on the bottom case.
M2*5L
TOP CASE
REMOVAL
12. Remove 6 screws (M2*5L(K))
2-13
TOPCASE
REMOVAL
Disassembly procedure
13. Separate the Top case from the bottom case.
nect the touch pad FFC and remove 1 piece of tape then take away the
touch pad FFC.
15. Press the two buttons then take away the touchpad.
2-14
MOTHERBOARD
MOTHERBOARD
REMOVAL
Disassembly procedure
Motherboard
The illustrations below show how to disassemble and remove the Motherboard.
Removing Motherboard
1. Remove 1 screws (M2*5L (K)).
2. Disconnect the Bluetooth , Mic .speaker, cables then take away the Motherboard.
2-15
Disassembly procedure
3. Separate the Motherboard from the bottom case.
4. Remove 4 screws on the IO bracket then take away.
M2*3L
2-16
Disassembly procedure
5. Remove 2 pieces of tapes and disconnect the modem cable.
6. Remove 2 screws and take away the modem board.
BOTTOM
CASE
MODULE
Bottom Case Module
The illustrations below show how to remove and disassemble the Bottom case module.
The module contains Bluetooth board, speaker cable.
Disassembling Bottom case Module
BOTTOM
CASE
DISASSEMBLY
1. Disconnect the Bluetooth cable and remove it.
2. Take away the Bluetooth board from the bottom case.
2-17
Disassembly procedure
3. using the pair of tweezers, disconnect the microphone.
4. Remove 4 screws and take away the speaker module from the bottom case.
2-18
Disassembly procedure
LCD MODULE
LCD Module
The illustrations below show how to remove and disassemble the LCD module. The
module contains LCD panel, Inverter board, LCD bezel, LCD back cover.
Disassembling LCD Module
LCD MODULE
DISASSEMBLY
1. Remove 6 rubber pads and 6 screws from LCD module.
2. Prying the inside edges of the LCD bezel, and then separates it from LCD back
2-19
Disassembly procedure
cover.
3. Disconnect the LCD cable.
4. Remove 4 screws and take away the LCD panel.
5. Remove 4 screws(M2*3L(K)) on the right LCD bracket to disassemble the LCD
2-20
Disassembly procedure
bracket.
M2*3L
6. Remove 4 screws(M2*3L(K)) on the left LCD bracket to disassemble the other
LCD bracket.
M2*3L
7. Remove 2 pieces of tapes and disconnect the coaxial cable then take it away.
8. Lift a little bit the inverter board and disconnect the inverter cable and then take
2-21
Disassembly procedure
it away.
9. Remove 2 screws on both hinge and take them away.
10. Remove 2 screws and remove 5 pieces of tapes then take away the wireless
2-22
Disassembly procedure
black & white wire.
11. Disconnect the camera cable.
12. Take away the Camera module from the LCD back cover.
2-23
2024年10月30日发(作者：官颂)
Disassembly procedure
2
Disassembly Procedure
Please follow the information provided in this section to perform the complete
disassembly procedure of the notebook. Be sure to use proper tools described
before.
Chapter
A
The disassembly procedure consists of the following steps:
• Battery Module
• HDD Module
• Wireless Module
• Memory Module
• VGA Module
• CPU Module
• ODD Module
• Keyboard
• Top Case Module
• Motherboard
• Bottom case Module
• LCD Module
2-1
SUS A8SR Series Notebook consists of various modules. This chapter describes the
procedures for the complete notebook disassembly. In addition, in between procedures,
the detailed disassembly procedure of individual modules will be provided for your
service needs.
BATTERY
BATTERY
MODULE
REMOVAL
HDD
MODULE
HDD
MODULE
REMOVAL
Disassembly procedure
Battery Module
The illustration below shows how to remove the battery module.
1. Slide the battery latch and lift the battery away from the system.
HDD Module
The illustrations below show how to remove the HDD module from the notebook.
Removing HDD Module
1. Remove 1 screws (M2*5L(K)), then remove the HDD door.
M2*5L
2-2
WIRELESS
LAN
Disassembly procedure
2. Lift the HDD module and then remove it.
3. Remove 4 screws [M3 * 4L(K)] to separate HDD from HDD housing.
M3*4L
Wireless LAN Module
The illustration below shows how to remove the Wireless LAN module.
Remove WLAN
Disconnect the MAIN & AUX antenna.
2-3
Disassembly procedure
WLAN REMOVEL
And open the two latches to pop the MINI PCI MODULE up then pull it out.
MEMORY
MODULE
MEMORY
REMOVAL
Memory Module
The A8SR Series Notebook does not have RAM onboard. There is one SO-DIMM
sockets for installing SO-DIMM RAM. It can upgrade the total memory size up to 1GB .
Removing Memory module
1. Remove 4screws (M2*5L(K)), then remove the CPU door.
2. Open the 2 latches aside (No. 1, 2), which will pop the memory module up to an
angle of 30°, then pull out the memory module in that angle (No. 3).
1
3
30
o
2
2-4
Disassembly procedure
VGA BOARD
MODULE
VGA Board Module
The illustrations below show how to remove the VGABoard module from the notebook.
Remove VGA board module
VGA BOARD
REMOVAL
1. Remove 4 screws (M2*5L(K)),then remove the VGA board module
CPU MODULE
CPU Module
The illustrations below show how to remove the CPU module from the notebook.
Removing CPU Module
CPU
REMOVAL
1. Remove 5 screws (M2*5L(K)) by order,.
5
M2*5L
32
1
4
2-5
Disassembly procedure
2. Disconnect the Fan cable then take away the CPU thermal module.
3. Turn the non-removable screw here 180 degrees counter-clockwise to loosen the
CPU.
L
O
Unlock
4. Squeeze the vacuum handling pump and use it to lift the CPU away.
2-6
OPTICAL
DRIVE
DEVICE
ODD
REMOVAL
Disassembly procedure
ODD Module
The illustration below shows how to remove the ODD module.
1. Remove 2 screws (M2*5L(K))
M2*5L
2. Push the ODD Module out by a pair of tweezers.
2-7
Disassembly procedure
KEYBOARD
Keyboard
The illustration of below shows how to remove the keyboard.
Removing Keyboard
K/B REMOVAL
1. Push the 4 latches in (No.1, No.2, No.3, No.4) with a pair of tweezers or a
single-slotted screwdriver and lift the keyboard plate up.
1 4 2 3
2. Lay the keyboard down over the Top case. *Do not remove the keyboard yet.
The keyboard cable is still attached.
3. Disconnect the FPC connector by a pair of tweezers, and remove keyboard plate
from top case.
2-8
Disassembly procedure
CABLE
REMOVAL
Removing Keyboard Cable
1. Use a flexible connector tool to unlock the cable connector on both ends (no. 1).
2. Carefully pull out the keyboard cable (no. 2) with a pair of tweezers.
3. Lock the connector (no. 3) again to avoid possible breakage.
2. Cable out
1. Unlock
1. Unlock
3.
3.
TOP CASE
MODULE
Top Case Module
The illustrations below show how to disassemble and remove the top case module of the notebook.
The module contains the top case itself.
Removing top Case Module
TOP CASE
DISAMMEMBL
1. Remove both hinge covers.
2. Disconnect the touchpad FFC from the top case.
2-9
Disassembly procedure
Touchpad FFC
3. Disconnect the camera cable from the LCD module.
4. Turn over the NB and remove the screw.
5. Remove the LCD cable cover
2-10
Disassembly procedure
6 .Remove two screws (M2*5L(K))then disconnect the Coaxial & inverter cable.
M2*5L
Coaxial cable
Inverter cable
7. Separate the antenna from the bottom case.
2-11
Disassembly procedure
8. Remove 2 screws on both hinges.
9. Turn over the NB and remove 2 screws here.
10. Separate the LCD module from the Top Case module
2-12
Disassembly procedure
BOTTOM
CASE
REMOVAL
11. Turn over the NB and remove 17 screws (M2*5L(K)) on the bottom case.
M2*5L
TOP CASE
REMOVAL
12. Remove 6 screws (M2*5L(K))
2-13
TOPCASE
REMOVAL
Disassembly procedure
13. Separate the Top case from the bottom case.
nect the touch pad FFC and remove 1 piece of tape then take away the
touch pad FFC.
15. Press the two buttons then take away the touchpad.
2-14
MOTHERBOARD
MOTHERBOARD
REMOVAL
Disassembly procedure
Motherboard
The illustrations below show how to disassemble and remove the Motherboard.
Removing Motherboard
1. Remove 1 screws (M2*5L (K)).
2. Disconnect the Bluetooth , Mic .speaker, cables then take away the Motherboard.
2-15
Disassembly procedure
3. Separate the Motherboard from the bottom case.
4. Remove 4 screws on the IO bracket then take away.
M2*3L
2-16
Disassembly procedure
5. Remove 2 pieces of tapes and disconnect the modem cable.
6. Remove 2 screws and take away the modem board.
BOTTOM
CASE
MODULE
Bottom Case Module
The illustrations below show how to remove and disassemble the Bottom case module.
The module contains Bluetooth board, speaker cable.
Disassembling Bottom case Module
BOTTOM
CASE
DISASSEMBLY
1. Disconnect the Bluetooth cable and remove it.
2. Take away the Bluetooth board from the bottom case.
2-17
Disassembly procedure
3. using the pair of tweezers, disconnect the microphone.
4. Remove 4 screws and take away the speaker module from the bottom case.
2-18
Disassembly procedure
LCD MODULE
LCD Module
The illustrations below show how to remove and disassemble the LCD module. The
module contains LCD panel, Inverter board, LCD bezel, LCD back cover.
Disassembling LCD Module
LCD MODULE
DISASSEMBLY
1. Remove 6 rubber pads and 6 screws from LCD module.
2. Prying the inside edges of the LCD bezel, and then separates it from LCD back
2-19
Disassembly procedure
cover.
3. Disconnect the LCD cable.
4. Remove 4 screws and take away the LCD panel.
5. Remove 4 screws(M2*3L(K)) on the right LCD bracket to disassemble the LCD
2-20
Disassembly procedure
bracket.
M2*3L
6. Remove 4 screws(M2*3L(K)) on the left LCD bracket to disassemble the other
LCD bracket.
M2*3L
7. Remove 2 pieces of tapes and disconnect the coaxial cable then take it away.
8. Lift a little bit the inverter board and disconnect the inverter cable and then take
2-21
Disassembly procedure
it away.
9. Remove 2 screws on both hinge and take them away.
10. Remove 2 screws and remove 5 pieces of tapes then take away the wireless
2-22
Disassembly procedure
black & white wire.
11. Disconnect the camera cable.
12. Take away the Camera module from the LCD back cover.
2-23