ESI U168 XT 24位USB音频接口用户指南说明书-USB迷|专注于互联网分享

2024年10月30日发(作者：冼自明)

Professional 24-bit USB Audio Interface

User’s Guide

Revision 2, May 2017

ESI

U168 XT

INDEX

1. Introduction .................................................................................................................................. 4

1.1 Features ................................................................................................................................................................ 4

2. Installation .................................................................................................................................... 7

2.1 System Recommendation ..................................................................................................................................... 7

2.2 Hardware Installation ........................................................................................................................................... 7

2.3 Driver & Software Installation ............................................................................................................................. 7

2.3.1 Installation under Windows .............................................................................................................................. 7

2.3.2 Installation under Mac 9

3. Control Panel .............................................................................................................................. 10

3.1 Latency settings ................................................................................................................................................. 11

4. Specifications .............................................................................................................................. 11

5. General Information .................................................................................................................. 13

ESI

U168 XT

1. Introduction

U168 XT is a USB 2.0 Hi-Speed audio interface for Mac and PC, bringing USB audio technology

to a new level by providing better performance for better results.

This interfaces provides not less than 16 input channels and 8 output channels that are all available

for simultaneous usage. The 24-bit / 96kHz solution not only provides balanced 1/4" TRS line

connectors, it also includes 4 integrated microphone preamps with XLR inputs on the front of the

unit with switchable +48V phantom power, 2 Hi-Z instrument inputs for electric guitars as well as

coaxial digital S/PDIF input and outputs. There are two independent headphone outputs on the

front, next to an integrated monitoring mixer. External keyboards, synthesizers and sound modules

can be connected via the MIDI inputs and outputs on the backside of the unit.

U168 XT provides fast high performance low latency drivers based on our EWDM and

DirectWIRE technology with support for the latest WDM, ASIO 2.0 and CoreAudio technology for

both Mac and PC, making it possible to use the interface with all current standard audio

applications available for professional usage.

All this makes the stylish U168 XT an audio interface, bringing USB audio for professional

applications to a new level.

1.1 Features

The front panel of the U168 XT hardware has these main features:

1. microphone and Hi-Z instrument input channel 1 with XLR/TRS combo connector, use this

connector to connect a dynamic or condenser microphone or an electric guitar. Next to it is the

on switch that enables this input for usage when pressed. When not pressed, the corresponding

line input on the backside of the unit is used instead. With the gain knob you can control the

input level which is indicated with the LEDs above it. The +48V switch enables phantom

power if required for a condenser microphone; when enabled this is shown with the LED next

to it. Please note that for microphones you should use XLR connection while a guitar needs to

use a TRS connection.

2. microphone and Hi-Z instrument input channel 2 with XLR/TRS combo connector, use this

connector to connect a dynamic or condenser microphone or an electric guitar. Next to it is the

on switch that enables this input for usage when pressed. When not pressed, the corresponding

line input on the backside of the unit is used instead. With the gain knob you can control the

input level which is indicated with the LEDs above it. The +48V switch enables phantom

power if required for a condenser microphone; when enabled this is shown with the LED next

to it. Please note that for microphones you should use XLR connection while a guitar needs to

use a TRS connection.

3. microphone input channel 3 with XLR connector, use this connector to connect a dynamic or

condenser microphone. Next to it is the on switch that enables this input for usage when

ESI

U168 XT

pressed. When not pressed, the corresponding line input on the backside of the unit is used

instead. With the gain knob you can control the input level which is indicated with the LEDs

above it. The +48V switch enables phantom power if required for a condenser microphone;

when enabled this is shown with the LED next to it.

4. microphone input channel 4 with XLR connector, use this connector to connect a dynamic or

condenser microphone. Next to it is the on switch that enables this input for usage when

pressed. When not pressed, the corresponding line input on the backside of the unit is used

instead. With the gain knob you can control the input level which is indicated with the LEDs

above it. The +48V switch enables phantom power if required for a condenser microphone;

when enabled this is shown with the LED next to it.

5. MONO 1 switch, allows you to create a mix down for input channels 1 and 2 to a dual stereo

signal (i.e. input channel 1 goes to channel 2 and input channel 2 goes to channel 1), for the

monitor mix. Likewise, the MONO 2 switch allows you to create a mix down for input

channels 3 and 4 to a dual stereo signal (i.e. input channel 3 goes to channel 4 and input

channel 4 goes to channel 3), for the monitor mix. This makes sure that you are not listening to

a microphone or guitar input signal on only the left or right speaker while monitoring.

6. input selection LEDs, showing the selection of the physical inputs for input channels 1 to 4.

When the corresponding LED is on, the input on the front is used. When the LED is off, the

line input from the backside of the unit is used instead.

7. headphone signal selection switches, allow you to select for each of the two headphone

outputs if the main signal from output channel 1/2 (switch is off) or from the mix output of the

integrated monitoring mixer (switch is on) will be used.

8. 1st headphone output with 1/4" TRS connector, use this to connect a pair of headphones and

control the volume / gain of it with the knob next to it.

9. 2nd headphone output with 1/4" TRS connector, use this to connect a second pair of

headphones and control the volume / gain of it with the knob next to it.

10. monitoring mixer, these three gain knobs allow you to control the integrated monitoring mixer

of U168 XT. The first knob controls the volume of the input channels 1 to 8, the second the

volume of input channels 9 to 16 and the last one the volume of the output channels 1 to 8. The

mixed signal is available via the headphone outputs (when selected) and the mix output on the

backside of the unit.

11. power switch / LED, allows you to switch U168 XT on and off. When on, the LED next to it

shows the status.

ESI

The rear panel of U168 XT has these main features:

U168 XT

12. MIDI input and output connectors, connects to MIDI equipment such as keyboards,

synthesizers, sound expanders and more.

13. 12V DC power connector, connects to the included DC power supply. U168 XT requires this

power supply to operate.

14. USB connection port, connects to your computer with the supplied USB cable.

15. S/PDIF digital input and output, these two RCA connectors provide the coaxial digital

connection option for S/PDIF signals. The input can be used in alternative to the analog input

channels 15/16 (switchable in the control panel by software), the output provides the playback

signal from output channel 1/2.

16. If required, this connects your unit to a standard laptop lock connector, preventing it from

being stolen.

17. mix output, provides balanced / unbalanced 1/4" TRS connectors for the stereo master mix

signal from the integrated monitoring mixer of U168 XT. This connects typically to your studio

monitors if you choose to use the integrated mixer.

18. line outputs channel 1 to 8, these balanced / unbalanced 1/4" TRS connectors provide each

independent analog output signal of U168 XT. If you do not use the integrated mixer, you

would typically connect output 1/2 to your studio monitors.

19. line inputs channel 1 to 16, these balanced / unbalanced 1/4" TRS connectors are used to input

up to 16 simultaneously available analog line signals. Input channels 5 to 16 are always

provided as line input signal, while for channels 1 to 4 you can select between the inputs on the

front panel or these inputs on the backside with the switches on the front panel of U168 XT.

ESI

U168 XT

2. Installation

2.1 System Recommendation

U168 XT is not simply a standard digital audio interface, but a high-resolution device capable of

advanced processing of audio content. Even though U168 XT is built to have low-CPU resource

dependability, system specifications play a key part in the U168 XTs performance. Systems with

more advanced components are generally recommended.

Minimum System Requirements

Windows Windows Vista / 7 / 8 / 8.1 or 10 (32- and 64-bit) operating system

1 available USB 2.0 port

Mac

Mac OS X 10.7 or higher

1 available USB 2.0 port

2.2 Hardware Installation

U168 XT is directly connected to an available USB port of your computer. In order to make sure

the unit works, you need to use the included electric power supply that connects your mains power

outlet to the 12V DC connector on the backside of U168 XT. Once this connection is made, simply

install the hardware by plugging it into your computer with the supplied USB cable.

USB port of a computer

2.3 Driver & Software Installation

After the connection of U168 XT, the operating system automatically detects it as a new hardware

device. However, you need to install our driver in order to use it.

We strongly recommend to download the latest driver from before installing

U168 XT on your computer. The driver on our website can always be more recent compared to the

driver on the included Installation DVD.

2.3.1 Installation under Windows

This text explains how to install U168 XT under Windows 10. If you use Windows Vista, Windows

7, Windows 8 or Windows 8.1, the steps are basically the same. Connect U168 XT before you

install the driver, but turn it off first.

To start the installation, launch the setup program, which is an .exe file that is inside a recent driver

download from our website or in the Windows XX folder (XX refers to the Windows version) of the

ESI

U168 XT

included Installation DVD, by double clicking on it. When launching the installer, Windows might

display a security message. Make sure to allow the installation. After that, the following dialog on

the left will appear. Click Next and then the dialog on the right will appear:

Now click Install. Files are now being copied. After some time an additional dialog will appear:

Confirm this by clicking Next. Again some files are being copied and typically you will be

prompted with a Windows Security message like this:

Confirm it by clicking Install. After a while the installation then will be completed and the

following dialog will appear:

ESI

U168 XT

Once you see the window on the left, click Finish. In many cases, the window on the right appears

then. We strongly suggest to select Yes, restart the computer now and then click Finish.

You can connect U168 XT to your computer anytime if not done yet and switch it on. Windows

will automatically setup the system so you can use the device.

To confirm the completion of the installation after rebooting the system, please check if the orange

color ESI icon is displayed in the taskbar notification area as shown below.

If you can see it, the driver installation has been completed successfully.

2.3.2 Installation under Mac OS X

To use U168 XT under Mac OS X, you need to install the driver from the included Installation

DVD from the Mac OS X folder or from newer driver download from our website, which is

recommended.

The driver and control panel gets installed by double clicking on the .dmg file and then in the

window that opens again double clicking on the installer. After that follow the instructions on your

screen. At the end of the installation, we recommend to reboot your system.

If the installer does not launch via a double click, click on it with the right mouse button (or hold

the ctrl-key on your keyboard while clicking with the left mouse button) and then choose Open and

then Open again.

Controlling some of the basic options of U168 XT under Mac OS X can also be done via the Audio

MIDI Setup utility from Mac OS X (from the folder Applications > Utilities).

ESI

U168 XT

3. Control Panel

This chapter describes the U168 XT Control Panel and it's functions.

Under Windows, to open the control panel double click on the ESI icon in the task notification area.

Under Mac OS X, there is an icon in the Applications folder. The following dialog will appear:

The panel has the following functions and sections:

INPUTS

The main part of the INPUTS section contains signal level meters for every physical input channel.

Under it, the current SAMPLERATE is displayed.

Under CLOCK SOURCE you can select the clock source for the digital audio processing. By

default it is set to INTERNAL which means that U168 XT is generating the master clock and sample

rate. If set to AUTO, then U168 XT can either get it's master clock from the S/PDIF input (when

enabled and a signal is connected to it) or switch automatically back to generating its own master

clock.

Next to that you can choose the physical analog inputs 15/16 or the digital S/PDIF input as a signal

source for the input channels 15 / 16.

OUTPUTS

The main parts of the OUTPUTS section contains volume control sliders and signal level meters

for each playback channel. Under each channel is a button that allows you to mute playback for that

channel (M). With the LINK button you can choose if you want to control the left and right

playback channels simultaneously.

Under OUTPUT LEVEL you can switch between +4dBu to set the output level of each individual

line output pair optimized for balanced audio signals to +4dBu studio standard level or -10dBV to

set the output level optimized for unbalanced audio signals to -10dBV consumer/HiFi standard

level.

ESI

U168 XT

The S/PDIF STATUS BIT section allows you to define if the S/PDIF output signal is sent with a

status bit for PROFESSIONAL or CONSUMER signals.

3.1 Latency settings

Under Windows via Config > Latency in the Control Panel it is possible to change the latency

setting (also called “buffer size”) for the driver of U168 XT. A smaller latency is the result of a

smaller buffer size and value. Depending on the typical application (e.g. for playback of software

synthesizers) a smaller latency is an advantage. At the same time, the best latency setting indirectly

depends on the performance of your system. For recording applications, a typical latency buffer size

between 4 and 8ms is standard, a value displayed typically inside your audio application. Note that

the latency has to be setup before launching the audio application using U168 XT.

Under Mac OS X, the latency is depending on the audio application and usually setup there inside

the settings of that software.

ESI

U168 XT

4. Specifications

Key Features

- 16 input / 8 output 24-bit / 96kHz USB 2.0 Hi-Speed Audio

Interface

- 16 input channels and 8 output channels available for

simultaneous usage

- 4 professional microphone preamps with +48V phantom power

support

- 2 Hi-Z high performance instrument inputs with 1/4" connector

- digital coaxial S/PDIF input with RCA connector

- digital coaxial S/PDIF output with RCA connector

- 16 line inputs with balanced 1/4" TRS connectors

- 8 line outputs with balanced 1/4" TRS connectors

- 2 independent headphone outputs with 1/4" stereo phone connector

- separate stereo mix output as master / monitoring output

- integrated monitoring mixer controlled on front panel

- 16 channel MIDI I/O with one MIDI input and one MIDI output

- powered by included DC (12V) power supply

- dimensions roughly 45.0cm x 14.5cm x 4.5cm

Audio Specifications

- supports up to 24-bit / 96kHz

- A/D Converter:

- 107dB (@ -60dBFS A-Weighted)

- 20Hz to 20kHz, +/- 0.02dB frequency response

- D/A Converter:

- 112dB (@ -60dBFS A-Weighted)

- 20Hz to 20kHz, +/- 0.02dB frequency response

Compatibility

- supports Windows Vista, Windows 7, Windows 8.1 and Windows 10

with ASIO 2.0, MME, WDM and DirectSound (incl. EWDM /

DirectWIRE)

- supports Mac OS X (10.7 and above) via CoreAudio USB audio

driver

ESI

U168 XT

5. General Information

Trademarks

ESI, U168 and U168 XT are trademarks of ESI Audiotechnik GmbH. Windows is a trademark of

Microsoft Corporation. Other product and brand names are trademarks or registered trademarks of

their respective companies.

The FCC and CE Regulation Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions : (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation. Caution : Any

changes or modifications in construction of this device with are not expressly approved by the party

responsible for compliance, could void the user's authority to operate equipment.

Note: This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful interference to

radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense. If

necessary, consult an experienced radio/television technician for additional suggestions.

Correspondence

For technical support inquiries, contact your nearest dealer, local distributor or ESI support online at

. Please also check our extensive Knowledge Base with Frequently Asked

Questions, installation videos and technical details about our products in the support section of our

website.

Disclaimer

All features and specifications subject to change without notice.

Parts of this manual are continually being updated. Please check our web site

occasionally for the most recent update information.