2024年11月3日发(作者：尉迟绮波)
100M or Gigabit Hi-PoE Switch
Quick Start Guide
UD17624B
Legal Information
©2019 Hangzhou Hikvision Digital Technology Co., Ltd. All rights
reserved.
About this Manual
The Manual includes instructions for using and managing the
Product. Pictures, charts, images and all other information
hereinafter are for description and explanation only. The
information contained in the Manual is subject to change,
without notice, due to firmware updates or other reasons. Please
find the latest version of this Manual at the Hikvision website
( / ).
Please use this Manual with the guidance and assistance of
professionals trained in supporting the Product.
Trademarks
and other Hikvision's trademarks
and logos are the properties of Hikvision in various jurisdictions.
Other trademarks and logos mentioned are the properties of
their respective owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS
MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE,
SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH
ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A
PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT
YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU
FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT
DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA,
CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING
NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN
CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF
HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES
FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE
ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY
LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK,
HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET
SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL
APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR
ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN
A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD
PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
i
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA
PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE
THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS
DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF
CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE
CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE
NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS
ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND
THE APPLICABLE LAW, THE LATER PREVAILS.
ii
Regulatory
FCC
Please take that changes or not expressly
approved by the party responsible for compliance could void the
user's authority to operate the equipment.
FCC compliance: This equipment has been tested and found to
comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide
against harmful interference when the
reasonable
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
manual, may cause harmful interference to radio
of this equipment in a
area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
FCC
This device complies with part 15 of the FCC Rules.
subject to the following two
device may not cause harmful interference.
device must accept any interference received, including
interference that may cause undesired
is
EU Conformity Statement
This product and - if applicable - the supplied accessories
too are marked with "CE" and comply therefore with the
applicable harmonized European standards listed under
2014/30/EU, the RoHS 2011/the EMC
65/EU.
2012/19/EU (WEEE Products marked with this
symbol cannot be disposed of as unsorted municipal waste
in the European Union. For proper recycling, return this
product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated
points. For more see:
.
2006/66/EC This product contains a
that cannot be disposed of as unsorted municipal
waste in the European Union. See the product
for The
is marked with this symbol, which may include
to indicate cadmium (Cd), lead (Pb), or mercury
(Hg). For proper recycling, return the
to your
point. For more
supplier or to a designated
see: .
iii
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards
requirements.
iv
Preface
Applicable Models
This manual is applicable to DS-3T03XXHP series and
DS-3T05XXHP series switches.
Symbol Conventions
The symbols that may be found in this document are defined as
follows.
Symbol
Danger
Description
Indicates a hazardous situation which, if not avoided,
will or could result in death or serious injury.
Indicates a potentially hazardous situation which, if
not avoided, could result in equipment damage, data
loss, performance degradation, or unexpected
results.
Provides additional information to emphasize or
supplement important points of the main text.
Caution
Note
v
Safety Instruction
Caution
•
During the installation and utilization of the device, please
strictly conform to electrical safety rules in different nations
and regions.
•
Use the power adapter delivered with the device only.
•
The device can be directly or modified to connect with IT
power distribution system.
•
Please install the device in accordance with the installation
method in the manual.
•
Do not place any naked flame sources, such as lit candles, on
the device.
•
Do not place any objects containing water or liquids on the
device. Prevent the device from water dropping or splashing.
•
The device must be installed in machine room or machine
cabinet only, and only maintenance staff or qualified person
can access to the device.
•
Do not touch the cover area of the device that may be
overheated.
Danger
•
Please fix the device in a stable position. Otherwise, serious
personal injury or casualties may happen if the device is
dumped.
•
The supporting accessories can only be used together with the
device. Using them with other device may cause instability and
injury.
•
The device must be firmly fixed on the DIN rail or wall to
prevent injury.
•
Place the device out of reach of kids.
•
The power socket or power plug is used to disconnect power.
Do not cover the power socket or power plug so that it can be
easily moved.
•
The device has multiple power supplies. To avoid electric
shock, please disconnect all power supplies during
maintenance.
•
This is a class A product and may cause radio interference in
which case the user may be required to take adequate
measures.
•
If the product does not work properly, please contact your
dealer or the nearest service center. Never attempt to
disassemble the product yourself. (We shall not assume any
responsibility for problems caused by unauthorized repair or
maintenance.)
vi
1 Introduction
1.1 Product Introduction
DS-3T03XXHP series and DS-3T05XXHP series switches are layer 2
Hi-PoE switches, providing advanced PoE power supply
technology and wider temperature (-30 to 65 °C, that is, -22 to
149 °F) design on the basis of high-performance access to ensure
stable data upload. The switches support Hi-PoE, long range, port
isolation, and PoE watchdog function.
1.2 Packing List
Switch
Power Adapter
AC Power Cord
Wall Mount Ear
DIN Rail Mount Clip
Screw
Quick Start Guide
DS-3T03XXHP Series
× 1
× 1
× 1
× 2
× 2
× 6
× 1
DS-3T05XXHP Series
× 1
× 1
× 1
× 2
× 2
× 6
× 1
1.3 Appearance
Different models of devices may have different appearances. The
following pictures are only for illustration.
Front Panel
Figure 1-1 DS-3T0306HP-E
Figure 1-2 DS-3T0310HP-E
Figure 1-3 DS-3T0506HP-E
1
Figure 1-4 DS-3T0510HP-E
Rear Panel
Figure 1-5 DS-3TXX06HP-E Series
Figure 1-6 DS-3TXX10HP-E Series
Port/Indicator Description
Indicator/PortDescription
•
Solid /Flashing: The output power of the switch
will reach the upper limit. The power supply may
be abnormal if more devices are connected.
•
Unlit: The switch provides power supply to PD
normally.
•
Solid: The switch is powered on normally.
PWR Indicator
•
Unlit: No power supply connected or power
supply is abnormal.
•
Solid: The port is connected.
LINK/ACT Indicator
•
Flashing: The port is transmitting data.
•
Unlit: The port is disconnected or connection is
abnormal.
•
Solid: The switch provides power supply to PD
normally.
•
Unlit: The switch is disconnected to PD, or
provides power supply to PD abnormally.
•
Solid: The gigabit SFP fiber optical port is
connected.
G2/5/6/9/10 Port
Indicator
•
Flashing: The gigabit SFP fiber optical port is
transmitting data.
•
Unlit: No gigabit SFP fiber optical port connected
or connection is abnormal.
Used for other Hi-PoE PTZ cameras connection. In
the temperature from 0 to 40 °C (32 to 104 °F), the
max. power of DS-3TXX06HP series is 60 W, and the
max. power of DS-3TXX10HP series is 90 W.
PoE-MAX Indicator
PoE Indicator
Hi-PoE Port
2
PoE Port
Gigabit RJ45 Port
Gigabit SFP Fiber
Optical Port
Grounding Terminal
Power Supply
Used for other PD devices connection via network
cables.
Used for devices connection via network cables.
Used for other devices connection via optical fiber
when plugged into with an optical module.
Used for connecting to the grounding cable to
protect the switch from lightning.
Use the attached power cord to connect the switch
to socket.
Support 3 modes:
•
Extend: Port 3 and 4 of DS-3TXX06HP-E series and
port 7 and 8 of DS-3TXX10HP-E series support
network transmission of up to 300 metres.
DIP Switch
•
Isolation: Data transmission of each port is
isolated from each other to improve network
security.
•
PoE Watchdog: Auto-detect and restart cameras
that do not respond.
2 Installation
Please select the appropriate installation method according to
the actual needs.
Before You Start
•
Keep the room well-ventilated.
•
Keep at least 10 cm distance around the device for heat
dissipation.
2.1 Wall-Mounted Installation
Before You Start
Use a screwdriver to remove the DIN rail-mounted unit.
Steps
1.
Fix the wall mount ears to the device with self-prepared M4
screws.
2.
Use self-prepared M4 screws to fix the device onto the wall.
Figure 2-1 Wall-Mounted Installation
3
2.2 Rail-Mounted Installation
Steps
1.
Fix the clip to the device.
2.
Insert the end of DIN rail-mounted unit into the notch under
the clip.
Figure 2-2 Rail Mounted Installation
3.
Press the DIN rail-mounted unit in quickly.
3 Grounding
3.1 Connecting the Grounding Cable
Grounding is used to quickly release overvoltage and overcurrent
induced by lightening for switch, and to protect personal safety.
Select the appropriate grounding method according to your
needs.
3.1.1 With Grounding Bar
If a grounding bar is available at the installation site, follow the
steps below.
Steps
1.
Connect one end of the grounding cable to the binding post on
the grounding bar.
2.
Connect the other end of the grounding cable to the grounding
terminal of the device and fix the screw.
Figure 3-1 Grounding with Grounding Bar
3.1.2 Without Grounding Bar
If there is no grounding bar but the earth is nearby and the
grounding body is allowed to be buried, follow the steps below.
Steps
1.
Bury an angle steel or steel pipe (≥ 0.5 m) into the mud land.
4
2.
Weld one end of the grounding cable to the angle steel or steel
pipe and embalm the welding point via electroplating or
coating.
3.
Connect the other end of the grounding cable to the grounding
terminal.
Figure 3-2 Grounding with Angle Steel
3.2 Connecting RJ45 Port
Use a network cable to connect the device to the RJ45 port of a
peer device such as network camera, NVR, switch, etc.
Figure 3-3 RJ45 Port Connection
3.3 Connecting SFP Optical Module
Connecting SFP optical module is supported when the device has
a fiber optic port or a combo.
When connected to a network cable, the combo is a RJ45 port.
When plugged into with an optical module and connected to an
optical fiber, the combo functions as a fiber optic port.
When connected to both the network cable and optical fiber at
the same time, the port works as a fiber optic port.
Steps
Caution
•
Single-Mode optical module needs to be paired.
•
Do not bend fiber optic (curvature radius ≥ 10 cm) overly.
•
Do not look directly at fiber optic connector because the laser
is harmful to eyes.
1.
Connect the two paired SFP optical modules with an optical
fiber.
5
2.
Hold the SFP optical module from one side, and smoothly plug
it into the device along with the SFP port slot until the optical
module and the device are closely attached.
3.
After powering on the device, check the status of LINK/ACT
indicator. If the indicator is lit, the link is connected. If the
indicator is unlit, the link is disconnected. Check the line, and
make sure peer devices have been started.
4 Powering on the Device
Please use the attached power cord in package to power on the
device.
Before powering your switch, make sure that:
•
The operating power supply is compliant with rated input
standard.
•
Port cables and grounding cables are correctly connected.
•
If there is outdoor cabling, connect a lightning rod and
lightening arrester to the cable.
Caution
PoE power supply line and strong wire cannot be wired together,
otherwise PD equipment or switch ports will be burnt.
6
2024年11月3日发(作者：尉迟绮波)
100M or Gigabit Hi-PoE Switch
Quick Start Guide
UD17624B
Legal Information
©2019 Hangzhou Hikvision Digital Technology Co., Ltd. All rights
reserved.
About this Manual
The Manual includes instructions for using and managing the
Product. Pictures, charts, images and all other information
hereinafter are for description and explanation only. The
information contained in the Manual is subject to change,
without notice, due to firmware updates or other reasons. Please
find the latest version of this Manual at the Hikvision website
( / ).
Please use this Manual with the guidance and assistance of
professionals trained in supporting the Product.
Trademarks
and other Hikvision's trademarks
and logos are the properties of Hikvision in various jurisdictions.
Other trademarks and logos mentioned are the properties of
their respective owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS
MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE,
SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH
ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A
PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT
YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU
FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT
DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA,
CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING
NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN
CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF
HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES
FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE
ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY
LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK,
HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET
SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL
APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR
ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN
A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD
PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
i
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA
PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE
THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS
DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF
CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE
CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE
NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS
ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND
THE APPLICABLE LAW, THE LATER PREVAILS.
ii
Regulatory
FCC
Please take that changes or not expressly
approved by the party responsible for compliance could void the
user's authority to operate the equipment.
FCC compliance: This equipment has been tested and found to
comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide
against harmful interference when the
reasonable
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
manual, may cause harmful interference to radio
of this equipment in a
area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
FCC
This device complies with part 15 of the FCC Rules.
subject to the following two
device may not cause harmful interference.
device must accept any interference received, including
interference that may cause undesired
is
EU Conformity Statement
This product and - if applicable - the supplied accessories
too are marked with "CE" and comply therefore with the
applicable harmonized European standards listed under
2014/30/EU, the RoHS 2011/the EMC
65/EU.
2012/19/EU (WEEE Products marked with this
symbol cannot be disposed of as unsorted municipal waste
in the European Union. For proper recycling, return this
product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated
points. For more see:
.
2006/66/EC This product contains a
that cannot be disposed of as unsorted municipal
waste in the European Union. See the product
for The
is marked with this symbol, which may include
to indicate cadmium (Cd), lead (Pb), or mercury
(Hg). For proper recycling, return the
to your
point. For more
supplier or to a designated
see: .
iii
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards
requirements.
iv
Preface
Applicable Models
This manual is applicable to DS-3T03XXHP series and
DS-3T05XXHP series switches.
Symbol Conventions
The symbols that may be found in this document are defined as
follows.
Symbol
Danger
Description
Indicates a hazardous situation which, if not avoided,
will or could result in death or serious injury.
Indicates a potentially hazardous situation which, if
not avoided, could result in equipment damage, data
loss, performance degradation, or unexpected
results.
Provides additional information to emphasize or
supplement important points of the main text.
Caution
Note
v
Safety Instruction
Caution
•
During the installation and utilization of the device, please
strictly conform to electrical safety rules in different nations
and regions.
•
Use the power adapter delivered with the device only.
•
The device can be directly or modified to connect with IT
power distribution system.
•
Please install the device in accordance with the installation
method in the manual.
•
Do not place any naked flame sources, such as lit candles, on
the device.
•
Do not place any objects containing water or liquids on the
device. Prevent the device from water dropping or splashing.
•
The device must be installed in machine room or machine
cabinet only, and only maintenance staff or qualified person
can access to the device.
•
Do not touch the cover area of the device that may be
overheated.
Danger
•
Please fix the device in a stable position. Otherwise, serious
personal injury or casualties may happen if the device is
dumped.
•
The supporting accessories can only be used together with the
device. Using them with other device may cause instability and
injury.
•
The device must be firmly fixed on the DIN rail or wall to
prevent injury.
•
Place the device out of reach of kids.
•
The power socket or power plug is used to disconnect power.
Do not cover the power socket or power plug so that it can be
easily moved.
•
The device has multiple power supplies. To avoid electric
shock, please disconnect all power supplies during
maintenance.
•
This is a class A product and may cause radio interference in
which case the user may be required to take adequate
measures.
•
If the product does not work properly, please contact your
dealer or the nearest service center. Never attempt to
disassemble the product yourself. (We shall not assume any
responsibility for problems caused by unauthorized repair or
maintenance.)
vi
1 Introduction
1.1 Product Introduction
DS-3T03XXHP series and DS-3T05XXHP series switches are layer 2
Hi-PoE switches, providing advanced PoE power supply
technology and wider temperature (-30 to 65 °C, that is, -22 to
149 °F) design on the basis of high-performance access to ensure
stable data upload. The switches support Hi-PoE, long range, port
isolation, and PoE watchdog function.
1.2 Packing List
Switch
Power Adapter
AC Power Cord
Wall Mount Ear
DIN Rail Mount Clip
Screw
Quick Start Guide
DS-3T03XXHP Series
× 1
× 1
× 1
× 2
× 2
× 6
× 1
DS-3T05XXHP Series
× 1
× 1
× 1
× 2
× 2
× 6
× 1
1.3 Appearance
Different models of devices may have different appearances. The
following pictures are only for illustration.
Front Panel
Figure 1-1 DS-3T0306HP-E
Figure 1-2 DS-3T0310HP-E
Figure 1-3 DS-3T0506HP-E
1
Figure 1-4 DS-3T0510HP-E
Rear Panel
Figure 1-5 DS-3TXX06HP-E Series
Figure 1-6 DS-3TXX10HP-E Series
Port/Indicator Description
Indicator/PortDescription
•
Solid /Flashing: The output power of the switch
will reach the upper limit. The power supply may
be abnormal if more devices are connected.
•
Unlit: The switch provides power supply to PD
normally.
•
Solid: The switch is powered on normally.
PWR Indicator
•
Unlit: No power supply connected or power
supply is abnormal.
•
Solid: The port is connected.
LINK/ACT Indicator
•
Flashing: The port is transmitting data.
•
Unlit: The port is disconnected or connection is
abnormal.
•
Solid: The switch provides power supply to PD
normally.
•
Unlit: The switch is disconnected to PD, or
provides power supply to PD abnormally.
•
Solid: The gigabit SFP fiber optical port is
connected.
G2/5/6/9/10 Port
Indicator
•
Flashing: The gigabit SFP fiber optical port is
transmitting data.
•
Unlit: No gigabit SFP fiber optical port connected
or connection is abnormal.
Used for other Hi-PoE PTZ cameras connection. In
the temperature from 0 to 40 °C (32 to 104 °F), the
max. power of DS-3TXX06HP series is 60 W, and the
max. power of DS-3TXX10HP series is 90 W.
PoE-MAX Indicator
PoE Indicator
Hi-PoE Port
2
PoE Port
Gigabit RJ45 Port
Gigabit SFP Fiber
Optical Port
Grounding Terminal
Power Supply
Used for other PD devices connection via network
cables.
Used for devices connection via network cables.
Used for other devices connection via optical fiber
when plugged into with an optical module.
Used for connecting to the grounding cable to
protect the switch from lightning.
Use the attached power cord to connect the switch
to socket.
Support 3 modes:
•
Extend: Port 3 and 4 of DS-3TXX06HP-E series and
port 7 and 8 of DS-3TXX10HP-E series support
network transmission of up to 300 metres.
DIP Switch
•
Isolation: Data transmission of each port is
isolated from each other to improve network
security.
•
PoE Watchdog: Auto-detect and restart cameras
that do not respond.
2 Installation
Please select the appropriate installation method according to
the actual needs.
Before You Start
•
Keep the room well-ventilated.
•
Keep at least 10 cm distance around the device for heat
dissipation.
2.1 Wall-Mounted Installation
Before You Start
Use a screwdriver to remove the DIN rail-mounted unit.
Steps
1.
Fix the wall mount ears to the device with self-prepared M4
screws.
2.
Use self-prepared M4 screws to fix the device onto the wall.
Figure 2-1 Wall-Mounted Installation
3
2.2 Rail-Mounted Installation
Steps
1.
Fix the clip to the device.
2.
Insert the end of DIN rail-mounted unit into the notch under
the clip.
Figure 2-2 Rail Mounted Installation
3.
Press the DIN rail-mounted unit in quickly.
3 Grounding
3.1 Connecting the Grounding Cable
Grounding is used to quickly release overvoltage and overcurrent
induced by lightening for switch, and to protect personal safety.
Select the appropriate grounding method according to your
needs.
3.1.1 With Grounding Bar
If a grounding bar is available at the installation site, follow the
steps below.
Steps
1.
Connect one end of the grounding cable to the binding post on
the grounding bar.
2.
Connect the other end of the grounding cable to the grounding
terminal of the device and fix the screw.
Figure 3-1 Grounding with Grounding Bar
3.1.2 Without Grounding Bar
If there is no grounding bar but the earth is nearby and the
grounding body is allowed to be buried, follow the steps below.
Steps
1.
Bury an angle steel or steel pipe (≥ 0.5 m) into the mud land.
4
2.
Weld one end of the grounding cable to the angle steel or steel
pipe and embalm the welding point via electroplating or
coating.
3.
Connect the other end of the grounding cable to the grounding
terminal.
Figure 3-2 Grounding with Angle Steel
3.2 Connecting RJ45 Port
Use a network cable to connect the device to the RJ45 port of a
peer device such as network camera, NVR, switch, etc.
Figure 3-3 RJ45 Port Connection
3.3 Connecting SFP Optical Module
Connecting SFP optical module is supported when the device has
a fiber optic port or a combo.
When connected to a network cable, the combo is a RJ45 port.
When plugged into with an optical module and connected to an
optical fiber, the combo functions as a fiber optic port.
When connected to both the network cable and optical fiber at
the same time, the port works as a fiber optic port.
Steps
Caution
•
Single-Mode optical module needs to be paired.
•
Do not bend fiber optic (curvature radius ≥ 10 cm) overly.
•
Do not look directly at fiber optic connector because the laser
is harmful to eyes.
1.
Connect the two paired SFP optical modules with an optical
fiber.
5
2.
Hold the SFP optical module from one side, and smoothly plug
it into the device along with the SFP port slot until the optical
module and the device are closely attached.
3.
After powering on the device, check the status of LINK/ACT
indicator. If the indicator is lit, the link is connected. If the
indicator is unlit, the link is disconnected. Check the line, and
make sure peer devices have been started.
4 Powering on the Device
Please use the attached power cord in package to power on the
device.
Before powering your switch, make sure that:
•
The operating power supply is compliant with rated input
standard.
•
Port cables and grounding cables are correctly connected.
•
If there is outdoor cabling, connect a lightning rod and
lightening arrester to the cable.
Caution
PoE power supply line and strong wire cannot be wired together,
otherwise PD equipment or switch ports will be burnt.
6