HP 打印机安装指南说明书-USB迷|专注于互联网分享

2024年11月5日发(作者：逯皓君)

LaserJet Pro M501

Getting Started Guide

IMPORTANT:

/support/ljM501

English ..............1

................4

Follow Steps 1 - 2 on the

printer hardware setup

poster, and then continue

with Step 3.

Set up the control panel

After turning on the printer, wait for it to initialize. To navigate the control panel, use the arrow buttons and the OK button.

Follow the prompts on the control panel to configure these settings:

• Language

• Location

• Default Settings

Under Default Settings select one of these options:

• Self-managed: Optimized default settings for most users that include guided setup and configuration steps

and automatic updates.

• IT-managed: Optimized default settings for fleet manageability.

Settings are fully customizable after initial setup.

NOTE:Select Print Information Sheet to print a page that instructs how to change the default settings.

4. Select the connection method

USB connection directly between the

printer and the computer

Use a standard network cable. (Cable not included.)

Wired (Ethernet) network connection

Use an A-to-B type USB cable (not included with all models).

Windows

1. Do not connect the USB cable before installing the software. If

the cable is already connected, disconnect it before continuing.

The installation process prompts to connect the cable at the

appropriate time.

2. Continue with “5. Locate or download the software installation files”

NOTE:During software installation, select the option to Directly

connect this computer using a USB cable. (Windows only)

Mac

1. For Mac, connect the USB cable between the computer and the

printer before installing the software.

2. Continue with “5. Locate or download the software installation files”

1. Connect the network cable to the printer and to the network. Wait

a few minutes for the printer to acquire a network address.

2. On the control panel, view the display while it is in the Ready

state. If an IP address is listed, the network connection has been

established. If not, wait a few more minutes and try again. Note

the IP address for use during software installation. Example IP

address: 192.168.0.1

To manually configure the IP address, see “Manually configure the

IP address.”

3. Continue with “5. Locate or download the software installation files”

NOTE:During software installation, select the option to Connect

through a network. (Windows only).

Manually configure the IP address

See the printer user guide for information on how to manually configure

the IP address. See the “Troubleshooting” section of this guide.

*J8H60-90994*

J8H60-90994

5. Locate or download the software installation files

HP Easy Start

1. Go to .

2. Select HP LaserJet Printers, and then click Begin.

3. Follow the on-screen instructions. Follow the prompts to save the file to

the computer.

4. Launch the software file from the folder where the file was saved, and

continue with “6. Install the software.”

Product support Web site

1. Go to /support/ljM501.

2. Under Download options, click drivers, software, & firmware, and then

select the appropriate operating system.

3. From Driver - Product Installation Software, determine which software

option to use, and then click the Download button next to it. Follow the

prompts to save the file to the computer.

4. Launch the software file from the folder where the file was saved, and

continue with “6. Install the software.”

Download from the Web

For Windows, the software installation files are provided on the CD that

came with the printer.

For OS X, the file on the CD includes a link to download the files from the

Web.

1. Insert the printer CD into the computer.

2. Continue with “6. Install the software.”

Install from the printer CD

Install notes

For more details about the software for the printer, see the install notes

file on the printer CD.

6. Install the software

Windows solution

1. The software installer detects the language of the operating

system, and then it displays the main menu of the installation

program in the same language. When installing from the CD, if

the installer program does not start after 30 seconds, browse the

CD drive on the computer and launch the file named .

2. The Software Selection screen details the software to be

installed.

• The recommended software installation includes the print

driver and software for all available printer features.

• To customize the software installed, click the Customize

software selections link. When finished, click the Next button.

3. Follow the on-screen instructions to install the software.

4. When prompted to select a connection type, select the

appropriate option for the type of connection:

• Directly connect this computer using a USB cable

• Connect through a network

NOTE:When connecting through a network, the easiest way to

detect the printer is to select Automatically find my printer on

the network.

NOTE:For wireless installation, select the option to Help me

set up a first-time wireless connection, and then select Yes,

retrieve the wireless settings on my computer.

OS X solution

1. The software installer detects the language of the operating

system, and then it displays the main menu of the installation

program in the same language.

2. Follow the on-screen instructions to install the software. When

prompted, connect the printer using the appropriate cable for the

connection.

3. At the end of the software installation process, use the HP Utility

Setup Assistant to configure printer options.

Install notes

Not all software components are available for all operating systems. For

more information, see the install notes file on the printer CD.

Set up mobile printing (optional)

To print from a phone or tablet, connect the device to the same network as

the printer.

Apple iOS devices (AirPrint): Open the item to print, and select the Action

icon. Select Print, select the printer, and then select Print.

Newer Android devices (4.4 or newer): Open the item to print, and select the

Menu button. Select Print, select the printer, and select Print.

Some devices require downloading the HP Print Service plugin app from the

Google Play store.

Older Android devices (4.3 or older): Download the HP ePrint app from the

Google Play store.

Windows Phone: Download the HP AiO Remote app from the Windows Store.

NOTE:Printing from a wireless device requires a wireless network

connection.

Learn more about mobile printing

To learn more about other mobile printing

options, including additional ePrint solutions,

scan the QR code, or see the “Mobile printing”

section of the user guide.

8. Set up HP ePrint via email (optional)

Use HP ePrint via email to print documents by sending them as an email attachment to the printer’s email address from any email-enabled device, even from

devices that are not on the same network.

To use HP ePrint via email, the printer must meet these requirements: 4. Open the HP Embedded Web Server. Go to a network-connected

computer, open a browser window, and type the IP address shown on

• The printer must be connected to a wired network and have Internet

the information sheet in the address box, and then press

ntEr

access.

NOTE:The HP EWS provides access to many other advanced printer

• HP Web Services must be enabled on the printer, and the printer must

settings as well.

be registered with HP Connected.

5. In the HP Embedded Web Server, click the HP Web Services tab.

Enable HP Web Services

6. Click the Enable button.

NOTE:Before enabling HP Web Services, verify that the printer is

The printer enables Web Services. The information page contains a

connected to a network. Also, verify that HP Web Services was not

printer code necessary to register the HP printer at HP Connected.

enabled during the initial printer setup.

7. Go to to create an HP ePrint account and

1. Press the OK button.

complete the setup process.

2. Open the HP Web Services menu.

3. Select Print Information Sheet. The printer will print the page.

Troubleshooting

User guide

The user guide includes printer usage and troubleshooting information. It

is available on the printer CD and on the Web:

1. Go to /support/ljM501.

2. Click Manuals.

For Windows, the user guide is copied to the computer during the

recommended software installation.

Windows

XP, Windows Vista

, Windows

7, and Windows

10:

Click Start, select Programs, All Programs, or All Apps, select HP,

select the folder for the HP printer, and then select Help.

Windows

On the Start screen, right-click an empty area on the screen, click All

Apps on the app bar, click the icon with the printer’s name, and then

select Help.

Additional support resources

For HP’s all-inclusive help for the printer, go to

/support/ljM501:

• Solve problems

• Find advanced configuration instructions

• Download software updates

• Join support forums

• Find warranty and regulatory information

• Access mobile printing resources

Check for firmware updates

On the printer control panel, press the OK button.

Open the Service menu.

Select LaserJet Update.

Select Check for Updates Now.

Wired (Ethernet) network connection

•

Verify that the printer is attached to the correct network port using a

cable of the correct length.

Verify that the lights next to the network port are lit.

Verify that the print driver is installed on the computer.

Test the network connection by pinging the printer:

Windows: Click Start > Run. Type cmd, and press

ntEr

. Type

ping, type a space, type the printer IP address, and then press

ntEr

. Example IP address: 192.168.0.1

OS X: Open the Network Utility, and type the IP address in the ping

pane. Press

ntEr

. Example IP address: 192.168.0.1

•

If the window displays round-trip times, the network is working.

If the ping does not work, try restarting the printer and recheck all of

the connection steps.

English ..............1

................4

/support/ljM501

Reproduction, adaptation or translation without prior written permission

is prohibited, except as allowed under the copyright laws.

The information contained herein is subject to change without notice.

The only warranties for HP products and services are set forth in the

express warranty statements accompanying such products and services.

Nothing herein should be construed as constituting an additional

warranty. HP shall not be liable for technical or editorial errors or

omissions contained herein.

Trademark Credits

Windows® is a U.S. registered trademark of Microsoft Corporation.

OS X is a trademark of Apple Inc., registered in the U.S. and other

countries.

AirPrint is a trademark of Apple Inc., registered in the U.S. and other

countries.

FCC Regulations

This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to Part 15 of the FCC rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates,

uses, and can radiate radio-frequency energy. If this equipment is not

installed and used in accordance with the instructions, it may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on,

correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase separation between equipment and receiver.

• Connect equipment to an outlet on a circuit different from that to

which the receiver is located.

• Consult your dealer or an experienced radio/TV technician.

Any changes or modifications to the product that are not expressly

approved by HP could void the user’s authority to operate this

equipment. Use of a shielded interface cable is required to comply

with the Class A limits of Part 15 of FCC rules. For more regulatory

information, see the electronic user guide. HP shall not be liable for any

direct, indirect, incidental, consequential, or other damage alleged in

connection with the furnishing or use of this information.

/support