2024年11月6日发(作者：涂香薇)
5105也是下面这个用户名和密码，要注意的就是5105只有三块板子，board 0,board 1,board
2; board 0是上行板，也就是坏了的那块板子，其它两块是ADSL板，你先show board 0看
一下上行以太口的状态是不是正常的，总之很简单，要是有什么问题就打我电话62002365)
用户名：root
密码：admin
(在5100中键入命令，可以先键入头几个字母，然后用空格键显示其余字母，这个和路由器
正好不同)
enable (进入配置模式)
MA5103#show (显示所有配置)
Command word
oard
Frame Slot Board Type Board State No.1 SubBoardtype No.2 SubBoardtype
----- ----- ---------- -------------- ------------------ ------------------
0 1 ADLE Normal - -
----- ----- ---------- -------------- ------------------ ------------------
Activate
Port State VPI(PVC) Template
---- ------------- ------------- ------------
0 Activating No VPI 1
1 Activating No VPI 1
2 Activating No VPI 1
3 Activating No VPI 1
4 Activating No VPI 1
5 Activating No VPI 1
6 Activating No VPI 1
7 Activating No VPI 1
8 Activating No VPI 1
9 Activating No VPI 1
10 Activating No VPI 1
11 Activating No VPI 1
12 Activating No VPI 1
13 Activating No VPI 1
14 Activating No VPI 1
15 Activating No VPI 1
16 Activating No VPI 1
17 Activating No VPI 1
18 Activating No VPI 1
19 Activating No VPI 1
20 Activating No VPI 1
21 Activating No VPI 1
22 Activating No VPI 1
23 Activating No VPI 1
24 Activating No VPI 1
25 Activating No VPI 1
26 Activating No VPI 1
27 Activating No VPI 1
28 Activating No VPI 1
29 Activating No VPI 1
30 Activating No VPI 1
31 Activating No VPI 1
---- ------------- ------------- ------------
MA5103＃c onfigure terminal (进入配置模式)
MA5103(config)#atmlan (配置atm或者eth)
Command word
(配置ip地址)
{ethernet,atm}:atm (这里配置atm的ip)
Changing system IP may effect existent connection,Are you sure?(y/n) [n]:y
Set successfully.
A5103(config)#atmlan ip－access
(配置允许访问系统的ip地址范围 这里是用户的地址断，数据由局方提供，下面还有配置网
管地址断可以访问)
Add acceptable IP address successfully.
MA5103(config)#atmlan (建立允许各个5100之间网管可以互访)
Command word
Add acceptable IP address successfully.
MA5103(config)#atmlan (允许网管地址访问该设备)
Command word
Add acceptable IP address successfully.
MA5103(config)#atmlan
Command word
Add successfully.
MA5103(config)#interface (进入一个板卡进行配置 这里进入lan板)
Command word
-----------------------------------------------
Mode [System Mode] (lan板的操作命令)
-----------------------------------------------
cls Clear screen
[no]exec-timeout Permit/Forbid to timeout and logout
help Description of the interactive help system
[no]help-mode Enable/Disable help mode operation
[no]monitor Open/Close the switch of debug information output
ping Send echo messages to test networks reachable
[no]scroll Screen scroll manually/automatically
search Search command content the word user input
show[11]
[no]smart Enable/Disable interactive operation
terminal[1]
tracert Trace route to destination
-----------------------------------------------
Mode [Config LAN]
-----------------------------------------------
[no]bind[2]
clear[1]
Set default VLAN of LAN board port
end Exit to Privileged EXEC mode
exit Exit current command mode
interface[8]
[no]loopback Set/Cancel LAND local loopback
max-mac-count Set the max learnable MAC addresses of PVC
[no]mirror Set/Cancel a port mapping to another port of LAND
operation-mode Switch LAN board operation mode
[no]pitp[2]
port[2]
show[15]
[no]shutdown Close/Open ethernet port of LAN board
traffic-suppress Set the traffic suppression
[no]trunk Add/Delete a trunk of LAN board
trunk-mode Set trunk mode of LAN board
vlan[3]
vport Set vport - opposite physical portID
MA5103(config-LAN-0/6)#operation-mode (选择lan操作模式)
{general,ipdslam,ipcascade}:ipdslam (选择ipdslam模式，该模式各端口不能进行配置)
Please delete all LAN access PVC(except LAN-NMS PVC)of current board before
(修改模式以后，系统会自动重启lan板)
switching operation mode.
Do you want to reserve LAN-NMS PVC of current board?(y/n) [y]:y
Some configuration data may be lost,are you sure to switch operation mode and to reset
current board?(y/n) [n]:y
Reset command was sent to service board successfully.
Switch operation mode successfully.
2004/09/15 14:29:23 minor MMX: Board manual reset(0/6)
M
MA5103(config)#
MA5103(config)#interface (进入lan板进行vlan配置)
Command word
MA5103(config-LAN-0/6)#vlan
Command word
共用一个小区vlan)
{general,region}:region
Failure: Board is configurating.
(ipdslam模式下只支持regiong vlan 小区vlan，不支持general vlan ，虽然有这个提示
铁通的网管vlan为100 ，是一个general vlan，在建立网管的时候直接建立，后面有方法)
MA5103(config-LAN-0/6)#vlan
Command word
{general,region}:general
Failure: Current operation mode is IPDSLAM mode.
(这里提示ipdslam模式下不支持general vlan)
MA5103(config-LAN-0/6)#exit
MA5103(config)#exit
MA5103#save (不要忘记再做了配置以后将配置存盘)
Are you sure to save system data?(y/n) [y]:y
This operation will take several minutes,
Frame 0 Slot 7 saving data in progress 2%.
Frame 0 Slot 7 saving data in progress 2%.
Frame 0 Slot 7 saving data in progress 2%.
Frame 0 Slot 7 saving data in progress 2%.
Frame 0 Slot 7 saving data in progress 20%.
Frame 0 Slot 7 saving data in progress 22%.
Frame 0 Slot 7 saving data in progress 24%.
Frame 0 Slot 7 saving data in progress 26%.
Frame 0 Slot 7 saving data in progress 28%.
Frame 0 Slot 7 saving data in progress 29%.
Frame 0 Slot 7 saving data in progress 31%.
Frame 0 Slot 7 saving data in progress 33%.
Frame 0 Slot 7 saving data in progress 35%.
Frame 0 Slot 7 saving data in progress 37%.
Frame 0 Slot 7 saving data in progress 39%.
Frame 0 Slot 7 saving data in progress 40%.
Frame 0 Slot 7 saving data in progress 100%.
Save data to FLASH successfully.
MA5103＃c onfigure terminal
MA5103(config)#adsl (增加adsl模板，这里只有上下行速率需要设置)
Command word :template
Command word
[
During input,press 'Q' to quit,then settings at this time are neglected.
> Will you set basic configuration for modem? (y/n) [n]:y
> ADSL operating mode:
> 0: All(G992.1, G992.2, T1.413)
> 1: Full rate(G992.1 or T1.413)
> 2: G992.2() (ADLI can not support )
> 3: T1.413 (ADLI can not support )
> 4: G992.1()
> 5: (Allows 992.1 and 992.2 with priority to 992.1)
Please select (0~5) [0]:
> Trellis coding 0-disable 1-enable (0~1) [1]:
> Upstream channel bit swap 0-disable 1-enable (0~1) [0]:
> Downstream channel bit swap 0-disable 1-enable (0~1) [0]:
> EOC mode 0-transparent mode 1-HDLC framing mode (0~1) [1]:
> Please select channel mode 0-interleaved 1-fast (0~1) [0]:
> Set interleaved delay mode 0-manual 1-auto(0~1) [0]:
> Unit of interleaved delay 0-DMT 1-ms (0~1) [0]:
> Will you set interleave depth? (y/n) [n]: y (设置通道工作方式）
> Max downstream interleaved depth 2,4,8,16,32,64,128 DMT (2~128) [32]:
> Max upstream interleaved depth 2,4,8,16,32,64,128 DMT (2~128) [16]:
> Will you set noise margin for modem? (y/n) [n]:
> Will you set parameters for rate? (y/n) [n]: y (是否配置上下行速率这里注意选Y）
If you want the fixed rate, set the Min value equal to Max value.
> Min bit rate in downstream (32~32000 Kbps) [32]: 32
> Max bit rate in downstream (32~32000 Kbps) [6144]: 1024
> Min bit rate in upstream (32~2208 Kbps) [32]: 32
> Max bit rate in upstream (32~2208 Kbps) [640]:512
Add template 2 successfully
MA5103(config)#interface adsl
MA5103(config-ADSL-0/1)#deactivate all (先去激活所有端口，以后再用模板2激活端口)
Port 0: Command send successfully.
Port 1: Command send successfully.
Port 2: Command send successfully.
Port 3: Command send successfully.
MA5103(config-ADSL-0/1)#activate all 2 (用模板2再次激活各个端口)
Port 0: Command send successfully.
Port 1: Command send successfully.
Port 2: Command send successfully.
Port31: Command send successfully.
MA5103(config-ADSL-0/1)#interface adsl 0/2 (进入adsl板0/2)
MA5103(config-ADSL-0/2)#deactivate all
Port 0: Command send successfully.
Port 1: Command send successfully.
Port 2: Command send successfully.
Port 3: Command send successfully.
Port 4: Command send successfully.
MA5103(config-ADSL-0/2)#activate all 2
Port 0: Command send successfully.
Port 1: Command send successfully.
Port 2: Command send successfully.
Port 3: Command send successfully.
Port 4: Command send successfully.
Port 5: Command send successfully.
Port31: Command send successfully.
MA5103(config)#show (show board 0/6 显示lan板信息）
Command word
oard
Frame Slot Board Type Board State No.1 SubBoardtype No.2 SubBoardtype
----- ----- ---------- -------------- ------------------ ------------------
0 6 LAND Normal H511E8FS -
----- ----- ---------- -------------- ------------------ ------------------
Auto Default Pause Partner Self
Port Tagged Nego Speed Duplex VLAN ID Frame State Active Auto Nego Apt
---- ------ ------ ----- ------ ------- ------- ------- ------ --------- ----
0 - Yes 100M Full - Yes OnLine Yes Yes Off
1 - Yes - - - - OffLine Yes - Off
2 - Yes - - - - OffLine Yes - Off
3 - Yes - - - - OffLine Yes - Off
4 - Yes - - - - OffLine Yes - Off
5 - Yes - - - - OffLine Yes - Off
6 - Yes - - - - OffLine Yes - Off
7 - Yes - - - - OffLine Yes - Off
---- ------ ------ ----- ------ ------- ------- ------- ------ --------- ----
Trunk mask : No trunk mask
Operation mode: IPDSLAM
MA5103(config)# show vlan (显示所有vlan)
[
This operation will take several minutes,
VLAN ID Mask VLAN Index Attribute
------- --------------- ---------- ----------
121 - 0 Region
MA5103(config)#multi-pvc (建立adsl端口到lan板的pvc)
{adsl,lan}:adsl
{region,vpi}:region
{adsl,lan}:lan
{vlanId,anyvlanId}:vlanid (选择vlan)
Add PVC successfully, CID = 1.
Add PVC successfully, CID = 31.
Add PVC successfully, CID = 32.
Success to add 32 PVC.
Fail to add 0 PVC.
2024年11月6日发(作者：涂香薇)
5105也是下面这个用户名和密码，要注意的就是5105只有三块板子，board 0,board 1,board
2; board 0是上行板，也就是坏了的那块板子，其它两块是ADSL板，你先show board 0看
一下上行以太口的状态是不是正常的，总之很简单，要是有什么问题就打我电话62002365)
用户名：root
密码：admin
(在5100中键入命令，可以先键入头几个字母，然后用空格键显示其余字母，这个和路由器
正好不同)
enable (进入配置模式)
MA5103#show (显示所有配置)
Command word
oard
Frame Slot Board Type Board State No.1 SubBoardtype No.2 SubBoardtype
----- ----- ---------- -------------- ------------------ ------------------
0 1 ADLE Normal - -
----- ----- ---------- -------------- ------------------ ------------------
Activate
Port State VPI(PVC) Template
---- ------------- ------------- ------------
0 Activating No VPI 1
1 Activating No VPI 1
2 Activating No VPI 1
3 Activating No VPI 1
4 Activating No VPI 1
5 Activating No VPI 1
6 Activating No VPI 1
7 Activating No VPI 1
8 Activating No VPI 1
9 Activating No VPI 1
10 Activating No VPI 1
11 Activating No VPI 1
12 Activating No VPI 1
13 Activating No VPI 1
14 Activating No VPI 1
15 Activating No VPI 1
16 Activating No VPI 1
17 Activating No VPI 1
18 Activating No VPI 1
19 Activating No VPI 1
20 Activating No VPI 1
21 Activating No VPI 1
22 Activating No VPI 1
23 Activating No VPI 1
24 Activating No VPI 1
25 Activating No VPI 1
26 Activating No VPI 1
27 Activating No VPI 1
28 Activating No VPI 1
29 Activating No VPI 1
30 Activating No VPI 1
31 Activating No VPI 1
---- ------------- ------------- ------------
MA5103＃c onfigure terminal (进入配置模式)
MA5103(config)#atmlan (配置atm或者eth)
Command word
(配置ip地址)
{ethernet,atm}:atm (这里配置atm的ip)
Changing system IP may effect existent connection,Are you sure?(y/n) [n]:y
Set successfully.
A5103(config)#atmlan ip－access
(配置允许访问系统的ip地址范围 这里是用户的地址断，数据由局方提供，下面还有配置网
管地址断可以访问)
Add acceptable IP address successfully.
MA5103(config)#atmlan (建立允许各个5100之间网管可以互访)
Command word
Add acceptable IP address successfully.
MA5103(config)#atmlan (允许网管地址访问该设备)
Command word
Add acceptable IP address successfully.
MA5103(config)#atmlan
Command word
Add successfully.
MA5103(config)#interface (进入一个板卡进行配置 这里进入lan板)
Command word
-----------------------------------------------
Mode [System Mode] (lan板的操作命令)
-----------------------------------------------
cls Clear screen
[no]exec-timeout Permit/Forbid to timeout and logout
help Description of the interactive help system
[no]help-mode Enable/Disable help mode operation
[no]monitor Open/Close the switch of debug information output
ping Send echo messages to test networks reachable
[no]scroll Screen scroll manually/automatically
search Search command content the word user input
show[11]
[no]smart Enable/Disable interactive operation
terminal[1]
tracert Trace route to destination
-----------------------------------------------
Mode [Config LAN]
-----------------------------------------------
[no]bind[2]
clear[1]
Set default VLAN of LAN board port
end Exit to Privileged EXEC mode
exit Exit current command mode
interface[8]
[no]loopback Set/Cancel LAND local loopback
max-mac-count Set the max learnable MAC addresses of PVC
[no]mirror Set/Cancel a port mapping to another port of LAND
operation-mode Switch LAN board operation mode
[no]pitp[2]
port[2]
show[15]
[no]shutdown Close/Open ethernet port of LAN board
traffic-suppress Set the traffic suppression
[no]trunk Add/Delete a trunk of LAN board
trunk-mode Set trunk mode of LAN board
vlan[3]
vport Set vport - opposite physical portID
MA5103(config-LAN-0/6)#operation-mode (选择lan操作模式)
{general,ipdslam,ipcascade}:ipdslam (选择ipdslam模式，该模式各端口不能进行配置)
Please delete all LAN access PVC(except LAN-NMS PVC)of current board before
(修改模式以后，系统会自动重启lan板)
switching operation mode.
Do you want to reserve LAN-NMS PVC of current board?(y/n) [y]:y
Some configuration data may be lost,are you sure to switch operation mode and to reset
current board?(y/n) [n]:y
Reset command was sent to service board successfully.
Switch operation mode successfully.
2004/09/15 14:29:23 minor MMX: Board manual reset(0/6)
M
MA5103(config)#
MA5103(config)#interface (进入lan板进行vlan配置)
Command word
MA5103(config-LAN-0/6)#vlan
Command word
共用一个小区vlan)
{general,region}:region
Failure: Board is configurating.
(ipdslam模式下只支持regiong vlan 小区vlan，不支持general vlan ，虽然有这个提示
铁通的网管vlan为100 ，是一个general vlan，在建立网管的时候直接建立，后面有方法)
MA5103(config-LAN-0/6)#vlan
Command word
{general,region}:general
Failure: Current operation mode is IPDSLAM mode.
(这里提示ipdslam模式下不支持general vlan)
MA5103(config-LAN-0/6)#exit
MA5103(config)#exit
MA5103#save (不要忘记再做了配置以后将配置存盘)
Are you sure to save system data?(y/n) [y]:y
This operation will take several minutes,
Frame 0 Slot 7 saving data in progress 2%.
Frame 0 Slot 7 saving data in progress 2%.
Frame 0 Slot 7 saving data in progress 2%.
Frame 0 Slot 7 saving data in progress 2%.
Frame 0 Slot 7 saving data in progress 20%.
Frame 0 Slot 7 saving data in progress 22%.
Frame 0 Slot 7 saving data in progress 24%.
Frame 0 Slot 7 saving data in progress 26%.
Frame 0 Slot 7 saving data in progress 28%.
Frame 0 Slot 7 saving data in progress 29%.
Frame 0 Slot 7 saving data in progress 31%.
Frame 0 Slot 7 saving data in progress 33%.
Frame 0 Slot 7 saving data in progress 35%.
Frame 0 Slot 7 saving data in progress 37%.
Frame 0 Slot 7 saving data in progress 39%.
Frame 0 Slot 7 saving data in progress 40%.
Frame 0 Slot 7 saving data in progress 100%.
Save data to FLASH successfully.
MA5103＃c onfigure terminal
MA5103(config)#adsl (增加adsl模板，这里只有上下行速率需要设置)
Command word :template
Command word
[
During input,press 'Q' to quit,then settings at this time are neglected.
> Will you set basic configuration for modem? (y/n) [n]:y
> ADSL operating mode:
> 0: All(G992.1, G992.2, T1.413)
> 1: Full rate(G992.1 or T1.413)
> 2: G992.2() (ADLI can not support )
> 3: T1.413 (ADLI can not support )
> 4: G992.1()
> 5: (Allows 992.1 and 992.2 with priority to 992.1)
Please select (0~5) [0]:
> Trellis coding 0-disable 1-enable (0~1) [1]:
> Upstream channel bit swap 0-disable 1-enable (0~1) [0]:
> Downstream channel bit swap 0-disable 1-enable (0~1) [0]:
> EOC mode 0-transparent mode 1-HDLC framing mode (0~1) [1]:
> Please select channel mode 0-interleaved 1-fast (0~1) [0]:
> Set interleaved delay mode 0-manual 1-auto(0~1) [0]:
> Unit of interleaved delay 0-DMT 1-ms (0~1) [0]:
> Will you set interleave depth? (y/n) [n]: y (设置通道工作方式）
> Max downstream interleaved depth 2,4,8,16,32,64,128 DMT (2~128) [32]:
> Max upstream interleaved depth 2,4,8,16,32,64,128 DMT (2~128) [16]:
> Will you set noise margin for modem? (y/n) [n]:
> Will you set parameters for rate? (y/n) [n]: y (是否配置上下行速率这里注意选Y）
If you want the fixed rate, set the Min value equal to Max value.
> Min bit rate in downstream (32~32000 Kbps) [32]: 32
> Max bit rate in downstream (32~32000 Kbps) [6144]: 1024
> Min bit rate in upstream (32~2208 Kbps) [32]: 32
> Max bit rate in upstream (32~2208 Kbps) [640]:512
Add template 2 successfully
MA5103(config)#interface adsl
MA5103(config-ADSL-0/1)#deactivate all (先去激活所有端口，以后再用模板2激活端口)
Port 0: Command send successfully.
Port 1: Command send successfully.
Port 2: Command send successfully.
Port 3: Command send successfully.
MA5103(config-ADSL-0/1)#activate all 2 (用模板2再次激活各个端口)
Port 0: Command send successfully.
Port 1: Command send successfully.
Port 2: Command send successfully.
Port31: Command send successfully.
MA5103(config-ADSL-0/1)#interface adsl 0/2 (进入adsl板0/2)
MA5103(config-ADSL-0/2)#deactivate all
Port 0: Command send successfully.
Port 1: Command send successfully.
Port 2: Command send successfully.
Port 3: Command send successfully.
Port 4: Command send successfully.
MA5103(config-ADSL-0/2)#activate all 2
Port 0: Command send successfully.
Port 1: Command send successfully.
Port 2: Command send successfully.
Port 3: Command send successfully.
Port 4: Command send successfully.
Port 5: Command send successfully.
Port31: Command send successfully.
MA5103(config)#show (show board 0/6 显示lan板信息）
Command word
oard
Frame Slot Board Type Board State No.1 SubBoardtype No.2 SubBoardtype
----- ----- ---------- -------------- ------------------ ------------------
0 6 LAND Normal H511E8FS -
----- ----- ---------- -------------- ------------------ ------------------
Auto Default Pause Partner Self
Port Tagged Nego Speed Duplex VLAN ID Frame State Active Auto Nego Apt
---- ------ ------ ----- ------ ------- ------- ------- ------ --------- ----
0 - Yes 100M Full - Yes OnLine Yes Yes Off
1 - Yes - - - - OffLine Yes - Off
2 - Yes - - - - OffLine Yes - Off
3 - Yes - - - - OffLine Yes - Off
4 - Yes - - - - OffLine Yes - Off
5 - Yes - - - - OffLine Yes - Off
6 - Yes - - - - OffLine Yes - Off
7 - Yes - - - - OffLine Yes - Off
---- ------ ------ ----- ------ ------- ------- ------- ------ --------- ----
Trunk mask : No trunk mask
Operation mode: IPDSLAM
MA5103(config)# show vlan (显示所有vlan)
[
This operation will take several minutes,
VLAN ID Mask VLAN Index Attribute
------- --------------- ---------- ----------
121 - 0 Region
MA5103(config)#multi-pvc (建立adsl端口到lan板的pvc)
{adsl,lan}:adsl
{region,vpi}:region
{adsl,lan}:lan
{vlanId,anyvlanId}:vlanid (选择vlan)
Add PVC successfully, CID = 1.
Add PVC successfully, CID = 31.
Add PVC successfully, CID = 32.
Success to add 32 PVC.
Fail to add 0 PVC.