上回刷了coreELEC，添加了红外遥控器，那么如法炮制再给armbian添个红外

1》安装

apt install ir-keytable  lirc#附：ir-keytable测试命令

2》测试自己的遥控

ir-keytable#输出结果Found /sys/class/rc/rc1/ with:  Name: meson-ir  Driver: meson-ir  Default keymap: rc-empty  Input device: /dev/input/event1  LIRC device: /dev/lirc0  Attached BPF protocols: Operation not supported  Supported kernel protocols: lirc rc-5 rc-5-sz jvc sony nec sanyo mce_kbd rc-6 sharp xmp imon rc-mm   Enabled kernel protocols: lirc nec   bus: 25, vendor/product: 0000:0000, version: 0x0000  Repeat delay = 500 ms, repeat period = 125 ms

上回刷了coreELEC，添加了红外遥控器，那么如法炮制再给armbian添个红外

1》安装

apt install ir-keytable  lirc#附：ir-keytable测试命令

2》测试自己的遥控

ir-keytable#输出结果Found /sys/class/rc/rc1/ with:  Name: meson-ir  Driver: meson-ir  Default keymap: rc-empty  Input device: /dev/input/event1  LIRC device: /dev/lirc0  Attached BPF protocols: Operation not supported  Supported kernel protocols: lirc rc-5 rc-5-sz jvc sony nec sanyo mce_kbd rc-6 sharp xmp imon rc-mm   Enabled kernel protocols: lirc nec   bus: 25, vendor/product: 0000:0000, version: 0x0000  Repeat delay = 500 ms, repeat period = 125 ms