2023年12月19日发(作者：果郎)
1.7 ATETXFREQOFFSET
Set ATE RF frequency :0 ~ 63 ; unit: 2KHz, decimal1.8 ATETXLEN
Set ATE frame :24 ~ 2312 ; decimal1.9 ATETXCNT
Set ATE frame Tx :1 ~ ; 32-bit, decimal1.10 ATETXMODE (Refer to TxMode)Set ATE Tx :0: CCK 802.11b1: OFDM 802.11g2: HT_MIX 802.11b/g/n3: Green Field 802.11n1.11 ATETXBW (Refer to TxMode)Set ATE Tx and Rx :0: 20MHz1: 40MHz1.12 ATETXGI (Refer to TxMode)
Set ATE Tx Guard :0: Long
1: Short1.13 ATETXMCS (Refer to TxMode)Set ATE Tx MCS :0 ~ 151.14 ATETXANT
Set ATE TX :0: All1: Antenna one2: Antenna two1.15 ATERXANTSet ATE RX :0: All1: Antenna one2: Antenna two
3: Antenna three1.16 ATERXFER
Set ATE to periodically reset and show up RxCount (per-second) and :0: Disable counter visability1: Enable counter visability1.17 ATESHOW
Show all parameters of :11.18 ATEHELPList all commands of :11.19 ResetCounterReset statistic :11.20 ATERRFRead all of the RF :11.21 ATEWRF1Writethe RF register :xxxxxxxx ;32-bit, hex1.22 ATEWRF2Write the RF register :xxxxxxxx ;32-bit, hex1.23 ATEWRF3Write the RF register :xxxxxxxx ;32-bit, hex1.24 ATEWRF4Write the RF register :xxxxxxxx ;32-bit, hex1.25 ATELDE2POverwrite all EEPROM contentsValue: ra0 set ATELDE2P=11.26 ATERE2PDisplay all EEPROM : ra0 set ATERE2P=1===================================================================================================2. Examples:=========2.1 Check EVM & Poweriwpriv ra0 set ATE=ATESTARTiwpriv ra0 set ATEDA=00:11:22:33:44:55
iwpriv ra0 set ATESA=00:aa:bb:cc:dd:eeiwpriv ra0 set ATEBSSID=00:11:22:33:44:55iwpriv ra0 set ATECHANNEL=1 ; set Channeliwpriv ra0 set ATETXMODE=1 ; set ra0 set ATETXMCS=7 ; set MCS ra0 set ATETXBW=0 ; set Bandwidthiwpriv ra0 set ATETXGI=0 ; set Long ra0 set ATETXLEN=1024 ; set packet ra0 set ATETXPOW0=18iwpriv ra0 set ATETXPOW1=18iwpriv ra0 set ATETXCNT=100000iwpriv ra0 set ATE=TXFRAME
2023年12月19日发(作者：果郎)
1.7 ATETXFREQOFFSET
Set ATE RF frequency :0 ~ 63 ; unit: 2KHz, decimal1.8 ATETXLEN
Set ATE frame :24 ~ 2312 ; decimal1.9 ATETXCNT
Set ATE frame Tx :1 ~ ; 32-bit, decimal1.10 ATETXMODE (Refer to TxMode)Set ATE Tx :0: CCK 802.11b1: OFDM 802.11g2: HT_MIX 802.11b/g/n3: Green Field 802.11n1.11 ATETXBW (Refer to TxMode)Set ATE Tx and Rx :0: 20MHz1: 40MHz1.12 ATETXGI (Refer to TxMode)
Set ATE Tx Guard :0: Long
1: Short1.13 ATETXMCS (Refer to TxMode)Set ATE Tx MCS :0 ~ 151.14 ATETXANT
Set ATE TX :0: All1: Antenna one2: Antenna two1.15 ATERXANTSet ATE RX :0: All1: Antenna one2: Antenna two
3: Antenna three1.16 ATERXFER
Set ATE to periodically reset and show up RxCount (per-second) and :0: Disable counter visability1: Enable counter visability1.17 ATESHOW
Show all parameters of :11.18 ATEHELPList all commands of :11.19 ResetCounterReset statistic :11.20 ATERRFRead all of the RF :11.21 ATEWRF1Writethe RF register :xxxxxxxx ;32-bit, hex1.22 ATEWRF2Write the RF register :xxxxxxxx ;32-bit, hex1.23 ATEWRF3Write the RF register :xxxxxxxx ;32-bit, hex1.24 ATEWRF4Write the RF register :xxxxxxxx ;32-bit, hex1.25 ATELDE2POverwrite all EEPROM contentsValue: ra0 set ATELDE2P=11.26 ATERE2PDisplay all EEPROM : ra0 set ATERE2P=1===================================================================================================2. Examples:=========2.1 Check EVM & Poweriwpriv ra0 set ATE=ATESTARTiwpriv ra0 set ATEDA=00:11:22:33:44:55
iwpriv ra0 set ATESA=00:aa:bb:cc:dd:eeiwpriv ra0 set ATEBSSID=00:11:22:33:44:55iwpriv ra0 set ATECHANNEL=1 ; set Channeliwpriv ra0 set ATETXMODE=1 ; set ra0 set ATETXMCS=7 ; set MCS ra0 set ATETXBW=0 ; set Bandwidthiwpriv ra0 set ATETXGI=0 ; set Long ra0 set ATETXLEN=1024 ; set packet ra0 set ATETXPOW0=18iwpriv ra0 set ATETXPOW1=18iwpriv ra0 set ATETXCNT=100000iwpriv ra0 set ATE=TXFRAME