2024年3月16日发(作者：才戈雅)
HQ136
HQ132
HQ130
12
34
56
78
910
11
12
1314
1516
17
could take several weeks before optimal shaving
performance is restored.
Two new batteries offer a shaving time of 60
5 Clean the cutter with the short-bristled side
Introduction
minutes.
of the cleaning brush (Fig. 14).
Congratulations on your purchase and welcome to
Using the appliance
Brush carefully in the direction of the arrow.
Philips! To fully benefit from the support that Philips
Shaving
6 Clean the guard with the cleaning
offers, register your product at /
Your skin may need 2 or 3 weeks to get
brush (Fig. 15).
welcome.
accustomed to the Philips shaving system.
7 Slide the shaving heads back into the retaining
Important
frame and put the retaining frame back into
Read this user manual carefully before you use the
Shaving on a dry face gives the best results.
1 Push the on/off slide upwards to switch on the shaving unit (Fig. 16).
appliance and save it for future reference.
the shaver (Fig. 5). 8 Put the shaving unit back onto the shaver.
Warning
2 Move the shaving heads over your skin. Make
Extra thorough cleaning
- This appliance is not intended for use by
both straight and circular movements (Fig. 6).
For extra thorough cleaning, put the shaving
persons (including children) with reduced
3 Push the on/off slide downwards to switch off
heads in a degreasing liquid (e.g. alcohol) every six
physical, sensory or mental capabilities, or lack
Shaving time
of experience and knowledge, unless they
the shaver.
have been given supervision or instruction
4 Put the protection cap on the shaver after
concerning use of the appliance by a person
use to prevent damage to the shaving
responsible for their safety.
heads (Fig. 7).
- Children should be supervised to ensure that
they do not play with the appliance.
Cleaning and maintenance
Caution
Never use scouring pads, abrasive cleaning agents
- Keep the appliance dry (Fig. 1).
or aggressive liquids such as petrol or acetone to
- Use and store the appliance at a temperature
clean the appliance.
between 15°C and 35°C.
Regular cleaning guarantees better shaving
- Remove the batteries from the appliance if you
performance.
are not going to use it for a month or more.
For easy and optimal cleaning, Philips Shaving Head
Compliance with standards
Cleaning Spray (type no. HQ110) is available. Ask
This Philips appliance complies with all standards
your Philips dealer for information.
regarding electromagnetic fields (EMF). If handled
Note: Philips Shaving Head Cleaning Spray may not
properly and according to the instructions in this
be available in all countries. Contact the Consumer
user manual, the appliance is safe to use based on
Care Centre in your country about the availability in
scientific evidence available today.
your country.
Preparing for use
You can also clean the shaver in the following way:
Inserting batteries
Every week: shaving unit and hair
chamber
The appliance runs on two R6 AA 1.5-volt
batteries. Preferably use Philips alkaline batteries.
1 Switch off the shaver.
Make sure that your hands are dry when you
2 Clean the top of the appliance with
insert the batteries.
the cleaning brush (Fig. 8).
3 Press the release button (1) and remove the
1 Remove the lid of the battery
shaving unit (2) (Fig. 9).
compartment (Fig. 2)
4 Clean the inside of the hair chamber with the
2 Place two batteries in the battery
cleaning brush (Fig. 10).
compartment (Fig. 3).
5 Clean the inside of the shaving unit with the
Note: Make sure the + and - indications on the
cleaning brush (Fig. 11).
batteries match the indications in the battery
6 Put the shaving unit back onto the shaver.
compartment.
Every two months: shaving heads
Note: The shaver does not work if the batteries have
1 Switch off the shaver.
been placed incorrectly.
2 Press the release button (1) and remove the
3 Put the lid of the battery compartment back
shaving unit (2) (Fig. 9).
onto the appliance. First insert the top part of
3 To remove the retaining frame, push the sides
the lid (1) and then press down the bottom
of the central spring towards each other
part (2) until you hear a click (Fig. 4).
(1). Then lift the retaining frame out of the
How to avoid damage due to battery
shaving unit (2) (Fig. 12).
leakage
4 Slide the shaving heads out of the retaining
- Do not expose the appliance to temperatures
frame (Fig. 13).
higher than 35°C.
Do not mix up the cutters and the guards.
- Remove the batteries if you are not going to
This is essential since each cutter has been
use the appliance for a month or more.
ground with its corresponding guard for optimal
- Do not leave empty batteries in the appliance.
performance. If you accidentally mix up the sets, it
2
months. To remove the shaving heads, follow steps
1 to 4 described above. After cleaning, lubricate
the central point on the inside of the guards with a
drop of sewing machine oil to prevent wear of the
shaving heads.
Replace the shaving heads every 2 years or if they
Replacement
are damaged or worn. Replace them with HQ4 Ç
Philips shaving heads only.
1 Switch off the shaver.
2 Press the release button (1) and remove the
shaving unit (2) (Fig. 9).
3 To remove the retaining frame, push the sides
of the central spring towards each other
(1). Then lift the retaining frame out of the
shaving unit (2) (Fig. 12).
4 Slide the shaving heads out of the retaining
frame and replace them with new
ones (Fig. 13).
5 Put the retaining frame back into the shaving
unit.
6 Put the shaving unit back onto the shaver.
The following accessories are available:
Accessories
- HQ4 Ç Philips shaving heads.
- HQ110 Philips Shaving Head Cleaning Spray
(not available in China).
-
Environment
Batteries contain substances that may pollute
the environment. Do not throw away empty
batteries with the normal household waste,
but dispose of them at an official collection
point for batteries. Always remove the batteries
before you discard and hand in the appliance at
an official collection point.
- Do not throw away the appliance with the
normal household waste at the end of its life,
but hand it in at an official collection point for
recycling. By doing this, you help to preserve
the environment (Fig. 17).
If you need service or information or if you have
Guarantee & service
a problem, please visit the Philips website at www.
or contact the Philips Consumer Care
Centre in your country (you find its phone number
4222.002.5009.4
in the worldwide guarantee leaflet). If there is no
Consumer Care Centre in your country, go to your
local Philips dealer.
Guarantee restrictions
The shaving heads (cutters and guards) are
not covered by the terms of the international
guarantee because they are subject to wear.
This chapter summarises the most common
Troubleshooting
problems you could encounter with the
appliance. If you are unable to solve the problem
with the information below, contact the Consumer
Care Centre in your country.
ProblemPossible causeSolution
Reduced
shaving
The shaving heads Clean the shaver thoroughly.
performance.
are dirty.‘Cleaning and maintenance’.
See chapter
Long hairs obstruct
the shaving heads.
Clean the cutters and guards with the
cleaning brush supplied.
‘Cleaning and maintenance’.
See chapter
The shaving heads
are damaged or
Replace the shaving heads.
worn.
‘Replacement’.
See chapter
The shaver
does not work
The batteries are
when I push
empty.
Replace the batteries.
‘Preparing for use’.
See chapter
the on/off
slide upwards.
The batteries
have been placed
Make sure the + and - indications on
incorrectly.
the batteries match the indications in
the battery compartment (see chapter
‘Preparing for use’).
Skin irritation.Y
time to get used to
our skin needs Skin irritation during the first 2-3 weeks
the Philips shaving
of use is normal. After this period, the skin
system.
irritation usually disappears.
34222.002.5009.4
剃须时间
两节新电池可供 60 分钟剃须。
产品简介
感谢您的惠顾，欢迎光临飞利浦！为了您能充
分享受飞利浦提供的支持服务，请登陆 www.
/welcome 网站注册您的产品。
使用本产品
剃须
您的皮肤可能需要 2 到 3 周才能适应飞利浦
剃须系统。
在干爽的面部剃须效果最佳。
向上推动开/关滑钮以接通剃须刀电源。 (
图 5)
将剃须刀头在皮肤上移动。作直线和迂回
动作。 (图 6)
向下推动开/关滑钮以关闭剃须刀电源。
使用之后用保护盖盖好剃须刀，以防剃须
刀头受损。 (图 7)
注意事项
使用产品之前，请仔细阅读本用户
手册，并妥善保管以供日后参考。
警告
- 本产品不打算由肢体不健全、感
觉或精神上有障碍或缺乏相关经
验和知识的人（包括儿童）使
用，除非有负责他们安全的人对
用清洁刷的短毛一侧清洁刀片。 (图 14)
按箭头方向仔细刷净。
用清洁刷清洁网罩。 (图 15)
滑动剃须刀头，将其重新安装到固定架
上，然后将固定架重新安装到剃须刀头部
件上。 (图 16)
将剃须刀头部件重新安装到剃须刀上。
极其彻底的清洁
如需彻底清洁，则应每隔六个月将剃须刀头浸
入脱脂液（如酒精）清洗。按照上述步骤 1 至
4 取下剃须刀头。清洗完成后，向网罩内的中
心点滴入一滴缝纫机油，以防剃须刀头磨损。
更换
剃须刀头应每 2 年更换一次，损坏或磨损时也
应加以更换。只能用 HQ4 Ç 飞利浦剃须刀头
他们使用本产品进行监督或指
导。
- 应照看好儿童，确保他们不玩耍
该产品。
注意
- 保持产品干燥。 (图 1)
- 必须在 15 摄氏度至 35 摄氏度
之间的温度下使用和存放本产
品。
- 如果超过一个月不使用本产品，
请从产品中取出电池。
符合标准
这款飞利浦产品符合关于电磁场 (EMF) 的相
关标准。据目前的科学证明，如果正确使用并
按照本用户手册中的说明进行操作，本产品是
安全的。
使用准备
插入电池
产品使用两节 R6 AA 1.5 伏电池。最好使用飞
利浦碱性电池。
装入电池之前，双手要保持干燥。
取下电池仓盖 (图 2)
将两节电池放入电池仓。 (图 3)
注意： 确保电池的正负极指示与电池仓内的
正负指示一致。
注意： 如果电池装错，则剃须刀就不会工
作。
将电池仓盖装回到产品。首先插入仓盖的
顶部 (1)，然后按下底部 (2)，直到听到“
咔哒”一声。 (图 4)
如何避免因电池泄漏而引起的损坏
- 切勿将产品暴露在温度高于 35°C 的环
境中。
- 如果一个月或一个月以上不使用本产品，
则将电池取出。
- 切勿将耗尽的电池留在产品中。
4
清洁和保养
不要使用钢丝绒、研磨性清洁剂或
腐蚀性液体（例如汽油或丙酮）来
清洁产品。
为保证更好的剃须效果，剃须刀必须定期清
洗。
为了更方便有效地清洁剃须刀，特推出飞利浦
剃须刀头清洁喷雾剂（型号 HQ110）。有关
信息，请咨询飞利浦家庭小电器客户服务部。
注意： 飞利浦剃须刀头清洁喷雾剂并非所有
国家/地区都有销售。请向当地的客户服务中
心了解是否有售。
您也可以用下列方式清洁剃须刀：
每周：剃须刀头部件和胡茬储
藏室
关闭剃须刀。
用清洁刷清洁产品顶部。 (图 8)
按下释放钮 (1)，取下剃须刀头部件 (2)。 (
图 9)
用清洁刷清洁胡茬储藏室的内侧。 (图 10)
用清洁刷清洁剃须刀头部件的内侧。 (
图 11)
将剃须刀头部件重新安装到剃须刀上。
每两个月：清洁剃须刀头
关闭剃须刀。
按下释放钮 (1)，取下剃须刀头部件 (2)。 (
图 9)
要取下固定架，请捏拢中央弹簧的两侧 (1)
。然后向上提起固定架，将其从剃须刀头
部件中取出 (2)。 (图 12)
将剃须刀头滑离固定架。 (图 13)
不要将刀片和网罩混合在一起。
这一点很重要，因为每组刀片和网罩都已相互
磨合得很好，可获得最佳剃须效果。如果不小
心将它们弄混，剃须刀将需要数周时间才能恢
复到最佳剃须性能。
进行更换。
关闭剃须刀。
按下释放钮 (1)，取下剃须刀头部件 (2)。 (
图 9)
要取下固定架，请捏拢中央弹簧的两侧 (1)
。然后向上提起固定架，将其从剃须刀头
部件中取出 (2)。 (图 12)
将剃须刀头从固定架上滑出，用新的剃须
刀头更换。 (图 13)
将固定架重新安装到剃须刀头部件上。
将剃须刀头部件重新安装到剃须刀上。
附件
可选配以下附件：
- HQ4Ç飞利浦剃须刀头。
- HQ110 飞利浦剃须刀头清洁喷雾剂（不在
中国出售）
环境
- 电池含有可能会污染环境的物质。不要将
耗尽的电池与一般的生活垃圾一同弃置，
而应将其交给官方回收站。丢弃产品时，
一定要将电池取出，或将其送到官方指定
的回收站。
- 弃置产品时，请不要将其与一般生活垃圾
堆放在一起；应将其交给官方指定的回收
中心。这样做有利于环保。 (图 17)
保修与服务
如果您需要服务或信息，或者有任何疑问，请
访问飞利浦网站：。您也可
与您所在地的飞利浦顾客服务中心联系（可从
全球保修卡中找到其电话号码）。如果您的所
在地没有飞利浦顾客服务中心，则可以与当地
的飞利浦经销商联系。
保修限制
由于剃须刀头（刀片和网罩）属于易磨损物
品，因此不在国际保修条款的涵盖范围之列。
故障种类和处理方法
本章归纳了使用本产品时最可能遇到的问题。
如果您无法根据下面的信息解决问题，请与贵
国（地区）的飞利浦客户服务中心联系。
4222.002.5009.4
问题可能的原因解决方法
剃须性能下剃须刀头很脏。彻底清洁剃须刀。见“清洁和保养”
降。一章。
过长的胡须堵塞了用随附的清洁刷清洁刀片和网罩。
剃须刀头。见“清洁和保养”一章。
剃须刀头已损坏或更换剃须刀头。见“更换”一章。
磨损。
向上推动开/电池已耗尽。更换电池。见“使用准备”一章。
关滑钮时剃
须刀不工
作。
电池放置不正确。确保电池的正负极指示与电池仓内的
正负极指示一致（见“使用准备”
一章）。
皮肤过敏。您的皮肤需要一定开始使用时的 2-3 周内，皮肤过敏是
的时间来适应飞利正常情况。在此之后，通常不再会出
浦剃须刀。现皮肤过敏现象。
54222.002.5009.4
2024年3月16日发(作者：才戈雅)
HQ136
HQ132
HQ130
12
34
56
78
910
11
12
1314
1516
17
could take several weeks before optimal shaving
performance is restored.
Two new batteries offer a shaving time of 60
5 Clean the cutter with the short-bristled side
Introduction
minutes.
of the cleaning brush (Fig. 14).
Congratulations on your purchase and welcome to
Using the appliance
Brush carefully in the direction of the arrow.
Philips! To fully benefit from the support that Philips
Shaving
6 Clean the guard with the cleaning
offers, register your product at /
Your skin may need 2 or 3 weeks to get
brush (Fig. 15).
welcome.
accustomed to the Philips shaving system.
7 Slide the shaving heads back into the retaining
Important
frame and put the retaining frame back into
Read this user manual carefully before you use the
Shaving on a dry face gives the best results.
1 Push the on/off slide upwards to switch on the shaving unit (Fig. 16).
appliance and save it for future reference.
the shaver (Fig. 5). 8 Put the shaving unit back onto the shaver.
Warning
2 Move the shaving heads over your skin. Make
Extra thorough cleaning
- This appliance is not intended for use by
both straight and circular movements (Fig. 6).
For extra thorough cleaning, put the shaving
persons (including children) with reduced
3 Push the on/off slide downwards to switch off
heads in a degreasing liquid (e.g. alcohol) every six
physical, sensory or mental capabilities, or lack
Shaving time
of experience and knowledge, unless they
the shaver.
have been given supervision or instruction
4 Put the protection cap on the shaver after
concerning use of the appliance by a person
use to prevent damage to the shaving
responsible for their safety.
heads (Fig. 7).
- Children should be supervised to ensure that
they do not play with the appliance.
Cleaning and maintenance
Caution
Never use scouring pads, abrasive cleaning agents
- Keep the appliance dry (Fig. 1).
or aggressive liquids such as petrol or acetone to
- Use and store the appliance at a temperature
clean the appliance.
between 15°C and 35°C.
Regular cleaning guarantees better shaving
- Remove the batteries from the appliance if you
performance.
are not going to use it for a month or more.
For easy and optimal cleaning, Philips Shaving Head
Compliance with standards
Cleaning Spray (type no. HQ110) is available. Ask
This Philips appliance complies with all standards
your Philips dealer for information.
regarding electromagnetic fields (EMF). If handled
Note: Philips Shaving Head Cleaning Spray may not
properly and according to the instructions in this
be available in all countries. Contact the Consumer
user manual, the appliance is safe to use based on
Care Centre in your country about the availability in
scientific evidence available today.
your country.
Preparing for use
You can also clean the shaver in the following way:
Inserting batteries
Every week: shaving unit and hair
chamber
The appliance runs on two R6 AA 1.5-volt
batteries. Preferably use Philips alkaline batteries.
1 Switch off the shaver.
Make sure that your hands are dry when you
2 Clean the top of the appliance with
insert the batteries.
the cleaning brush (Fig. 8).
3 Press the release button (1) and remove the
1 Remove the lid of the battery
shaving unit (2) (Fig. 9).
compartment (Fig. 2)
4 Clean the inside of the hair chamber with the
2 Place two batteries in the battery
cleaning brush (Fig. 10).
compartment (Fig. 3).
5 Clean the inside of the shaving unit with the
Note: Make sure the + and - indications on the
cleaning brush (Fig. 11).
batteries match the indications in the battery
6 Put the shaving unit back onto the shaver.
compartment.
Every two months: shaving heads
Note: The shaver does not work if the batteries have
1 Switch off the shaver.
been placed incorrectly.
2 Press the release button (1) and remove the
3 Put the lid of the battery compartment back
shaving unit (2) (Fig. 9).
onto the appliance. First insert the top part of
3 To remove the retaining frame, push the sides
the lid (1) and then press down the bottom
of the central spring towards each other
part (2) until you hear a click (Fig. 4).
(1). Then lift the retaining frame out of the
How to avoid damage due to battery
shaving unit (2) (Fig. 12).
leakage
4 Slide the shaving heads out of the retaining
- Do not expose the appliance to temperatures
frame (Fig. 13).
higher than 35°C.
Do not mix up the cutters and the guards.
- Remove the batteries if you are not going to
This is essential since each cutter has been
use the appliance for a month or more.
ground with its corresponding guard for optimal
- Do not leave empty batteries in the appliance.
performance. If you accidentally mix up the sets, it
2
months. To remove the shaving heads, follow steps
1 to 4 described above. After cleaning, lubricate
the central point on the inside of the guards with a
drop of sewing machine oil to prevent wear of the
shaving heads.
Replace the shaving heads every 2 years or if they
Replacement
are damaged or worn. Replace them with HQ4 Ç
Philips shaving heads only.
1 Switch off the shaver.
2 Press the release button (1) and remove the
shaving unit (2) (Fig. 9).
3 To remove the retaining frame, push the sides
of the central spring towards each other
(1). Then lift the retaining frame out of the
shaving unit (2) (Fig. 12).
4 Slide the shaving heads out of the retaining
frame and replace them with new
ones (Fig. 13).
5 Put the retaining frame back into the shaving
unit.
6 Put the shaving unit back onto the shaver.
The following accessories are available:
Accessories
- HQ4 Ç Philips shaving heads.
- HQ110 Philips Shaving Head Cleaning Spray
(not available in China).
-
Environment
Batteries contain substances that may pollute
the environment. Do not throw away empty
batteries with the normal household waste,
but dispose of them at an official collection
point for batteries. Always remove the batteries
before you discard and hand in the appliance at
an official collection point.
- Do not throw away the appliance with the
normal household waste at the end of its life,
but hand it in at an official collection point for
recycling. By doing this, you help to preserve
the environment (Fig. 17).
If you need service or information or if you have
Guarantee & service
a problem, please visit the Philips website at www.
or contact the Philips Consumer Care
Centre in your country (you find its phone number
4222.002.5009.4
in the worldwide guarantee leaflet). If there is no
Consumer Care Centre in your country, go to your
local Philips dealer.
Guarantee restrictions
The shaving heads (cutters and guards) are
not covered by the terms of the international
guarantee because they are subject to wear.
This chapter summarises the most common
Troubleshooting
problems you could encounter with the
appliance. If you are unable to solve the problem
with the information below, contact the Consumer
Care Centre in your country.
ProblemPossible causeSolution
Reduced
shaving
The shaving heads Clean the shaver thoroughly.
performance.
are dirty.‘Cleaning and maintenance’.
See chapter
Long hairs obstruct
the shaving heads.
Clean the cutters and guards with the
cleaning brush supplied.
‘Cleaning and maintenance’.
See chapter
The shaving heads
are damaged or
Replace the shaving heads.
worn.
‘Replacement’.
See chapter
The shaver
does not work
The batteries are
when I push
empty.
Replace the batteries.
‘Preparing for use’.
See chapter
the on/off
slide upwards.
The batteries
have been placed
Make sure the + and - indications on
incorrectly.
the batteries match the indications in
the battery compartment (see chapter
‘Preparing for use’).
Skin irritation.Y
time to get used to
our skin needs Skin irritation during the first 2-3 weeks
the Philips shaving
of use is normal. After this period, the skin
system.
irritation usually disappears.
34222.002.5009.4
剃须时间
两节新电池可供 60 分钟剃须。
产品简介
感谢您的惠顾，欢迎光临飞利浦！为了您能充
分享受飞利浦提供的支持服务，请登陆 www.
/welcome 网站注册您的产品。
使用本产品
剃须
您的皮肤可能需要 2 到 3 周才能适应飞利浦
剃须系统。
在干爽的面部剃须效果最佳。
向上推动开/关滑钮以接通剃须刀电源。 (
图 5)
将剃须刀头在皮肤上移动。作直线和迂回
动作。 (图 6)
向下推动开/关滑钮以关闭剃须刀电源。
使用之后用保护盖盖好剃须刀，以防剃须
刀头受损。 (图 7)
注意事项
使用产品之前，请仔细阅读本用户
手册，并妥善保管以供日后参考。
警告
- 本产品不打算由肢体不健全、感
觉或精神上有障碍或缺乏相关经
验和知识的人（包括儿童）使
用，除非有负责他们安全的人对
用清洁刷的短毛一侧清洁刀片。 (图 14)
按箭头方向仔细刷净。
用清洁刷清洁网罩。 (图 15)
滑动剃须刀头，将其重新安装到固定架
上，然后将固定架重新安装到剃须刀头部
件上。 (图 16)
将剃须刀头部件重新安装到剃须刀上。
极其彻底的清洁
如需彻底清洁，则应每隔六个月将剃须刀头浸
入脱脂液（如酒精）清洗。按照上述步骤 1 至
4 取下剃须刀头。清洗完成后，向网罩内的中
心点滴入一滴缝纫机油，以防剃须刀头磨损。
更换
剃须刀头应每 2 年更换一次，损坏或磨损时也
应加以更换。只能用 HQ4 Ç 飞利浦剃须刀头
他们使用本产品进行监督或指
导。
- 应照看好儿童，确保他们不玩耍
该产品。
注意
- 保持产品干燥。 (图 1)
- 必须在 15 摄氏度至 35 摄氏度
之间的温度下使用和存放本产
品。
- 如果超过一个月不使用本产品，
请从产品中取出电池。
符合标准
这款飞利浦产品符合关于电磁场 (EMF) 的相
关标准。据目前的科学证明，如果正确使用并
按照本用户手册中的说明进行操作，本产品是
安全的。
使用准备
插入电池
产品使用两节 R6 AA 1.5 伏电池。最好使用飞
利浦碱性电池。
装入电池之前，双手要保持干燥。
取下电池仓盖 (图 2)
将两节电池放入电池仓。 (图 3)
注意： 确保电池的正负极指示与电池仓内的
正负指示一致。
注意： 如果电池装错，则剃须刀就不会工
作。
将电池仓盖装回到产品。首先插入仓盖的
顶部 (1)，然后按下底部 (2)，直到听到“
咔哒”一声。 (图 4)
如何避免因电池泄漏而引起的损坏
- 切勿将产品暴露在温度高于 35°C 的环
境中。
- 如果一个月或一个月以上不使用本产品，
则将电池取出。
- 切勿将耗尽的电池留在产品中。
4
清洁和保养
不要使用钢丝绒、研磨性清洁剂或
腐蚀性液体（例如汽油或丙酮）来
清洁产品。
为保证更好的剃须效果，剃须刀必须定期清
洗。
为了更方便有效地清洁剃须刀，特推出飞利浦
剃须刀头清洁喷雾剂（型号 HQ110）。有关
信息，请咨询飞利浦家庭小电器客户服务部。
注意： 飞利浦剃须刀头清洁喷雾剂并非所有
国家/地区都有销售。请向当地的客户服务中
心了解是否有售。
您也可以用下列方式清洁剃须刀：
每周：剃须刀头部件和胡茬储
藏室
关闭剃须刀。
用清洁刷清洁产品顶部。 (图 8)
按下释放钮 (1)，取下剃须刀头部件 (2)。 (
图 9)
用清洁刷清洁胡茬储藏室的内侧。 (图 10)
用清洁刷清洁剃须刀头部件的内侧。 (
图 11)
将剃须刀头部件重新安装到剃须刀上。
每两个月：清洁剃须刀头
关闭剃须刀。
按下释放钮 (1)，取下剃须刀头部件 (2)。 (
图 9)
要取下固定架，请捏拢中央弹簧的两侧 (1)
。然后向上提起固定架，将其从剃须刀头
部件中取出 (2)。 (图 12)
将剃须刀头滑离固定架。 (图 13)
不要将刀片和网罩混合在一起。
这一点很重要，因为每组刀片和网罩都已相互
磨合得很好，可获得最佳剃须效果。如果不小
心将它们弄混，剃须刀将需要数周时间才能恢
复到最佳剃须性能。
进行更换。
关闭剃须刀。
按下释放钮 (1)，取下剃须刀头部件 (2)。 (
图 9)
要取下固定架，请捏拢中央弹簧的两侧 (1)
。然后向上提起固定架，将其从剃须刀头
部件中取出 (2)。 (图 12)
将剃须刀头从固定架上滑出，用新的剃须
刀头更换。 (图 13)
将固定架重新安装到剃须刀头部件上。
将剃须刀头部件重新安装到剃须刀上。
附件
可选配以下附件：
- HQ4Ç飞利浦剃须刀头。
- HQ110 飞利浦剃须刀头清洁喷雾剂（不在
中国出售）
环境
- 电池含有可能会污染环境的物质。不要将
耗尽的电池与一般的生活垃圾一同弃置，
而应将其交给官方回收站。丢弃产品时，
一定要将电池取出，或将其送到官方指定
的回收站。
- 弃置产品时，请不要将其与一般生活垃圾
堆放在一起；应将其交给官方指定的回收
中心。这样做有利于环保。 (图 17)
保修与服务
如果您需要服务或信息，或者有任何疑问，请
访问飞利浦网站：。您也可
与您所在地的飞利浦顾客服务中心联系（可从
全球保修卡中找到其电话号码）。如果您的所
在地没有飞利浦顾客服务中心，则可以与当地
的飞利浦经销商联系。
保修限制
由于剃须刀头（刀片和网罩）属于易磨损物
品，因此不在国际保修条款的涵盖范围之列。
故障种类和处理方法
本章归纳了使用本产品时最可能遇到的问题。
如果您无法根据下面的信息解决问题，请与贵
国（地区）的飞利浦客户服务中心联系。
4222.002.5009.4
问题可能的原因解决方法
剃须性能下剃须刀头很脏。彻底清洁剃须刀。见“清洁和保养”
降。一章。
过长的胡须堵塞了用随附的清洁刷清洁刀片和网罩。
剃须刀头。见“清洁和保养”一章。
剃须刀头已损坏或更换剃须刀头。见“更换”一章。
磨损。
向上推动开/电池已耗尽。更换电池。见“使用准备”一章。
关滑钮时剃
须刀不工
作。
电池放置不正确。确保电池的正负极指示与电池仓内的
正负极指示一致（见“使用准备”
一章）。
皮肤过敏。您的皮肤需要一定开始使用时的 2-3 周内，皮肤过敏是
的时间来适应飞利正常情况。在此之后，通常不再会出
浦剃须刀。现皮肤过敏现象。
54222.002.5009.4