2024年4月1日发(作者：向景山)
外部焊接点陈列为:
1 3 5 7 9 11 13 15 17 19 21 23 25 27 29
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30
接口定义为:
1 Ground (-) 地
2 Line Out - Common Ground (-) 线路输入 地
3 Line Out - R (+) R声道线路输入
4 Line Out - L (+) L声道线路输入
5 Line In - R (+) R声道线路输入
6 Line In - L (+) L声道线路输入
7
8 Video Out - Composite Video (for ipingzheimerwouls disewhene
colour when slideshow triggered) 复合视频输入
9
10
11 Seriing GND RS-232串口 地
12 Seriing TxD RS-232串口 TxD
13 Seriing RxD RS-232串口 RxD
14
15 Ground (-) 地
16 USB GND (-) USB电源负极
17
18 3.3V Power (+) 3.3V电源正极
19 Firewire Power 12 VDC (+) 1392前线12V电源 正极
20 Firewire Power 12 VDC (+) 1392前线12V电源 正极
21 Accessory Indicnext toor 附件判别接口
22 FireWire Dnext toa TPA (-) 1392前线数据 TPA(-)
23 USB Power 5 VDC (+) USB 5V 电源 正极
24 FireWire Dnext toa TPA (+) 1392前线数据 TPA(+)
25 USB Dnext toa (-) USB 数据(-)
26 FireWire Dnext toa TPB (-) 1392前线数据 TPA(-)
27 USB Dnext toa (+) USB 数据(+)
1
28 FireWire Dnext toa TPB (+) 1392前线数据 TPB(+)
29 FireWire Ground (-) 1392前线12V电源 负极
30 FireWire Ground (-) 1392前线12V电源 负极
Connector pinout for: Apple iPod, iPad and iPhone dock
30 pin connector used on the dock station for iPod, iPad and
iPhone.
Available in all Apple iPod MP3 player (iPod 1G, 2G, 3G, 4G,
5G and Nano).
This connector is used on iPod (starting from 3
rd
generation),
iPad and iPhone. It is used to connect the iPod or iPhone to various
devices: PC (via USB or FireWire IEEE1394), audio amplifier, serial
device (controlled via the Apple Accessory Protocol).
Pin
1
2
3
4
5
6
8
9
Signal
GND
GND
Right
Left
Right In
Left In
Video Out
S-Video
Chrominance
output
Description
Ground (-), internaly connected with Pin 2 on iPod motherboard
Audio and Video ground (-), internaly connected with Pin 2 on
iPod motherboard
Line Out - R (+) (Audio output, right channel)
Line Out - L(+) (Audio output, left channel)
Line In - R (+)
Line In - L (+)
Composite video output (only when the slideshow mode is active
on iPod Photo)
for iPod Color, Photo only
2
10
11
12
13
14
15
16
17
S-Video
for iPod Color, Photo only
Luminance output
GND
Tx
Rx
NC
GND
GND
NC
Serial GND
ipod sending line, Serial TxD
ipod receiving line, Serial RxD
Ground (-), internaly connected with pin 16 on iPod motherboard
USB GND (-), internaly connected with pin 15 on iPod
motherboard
3.3V Power (+)
Stepped up to provide +5 VDC to USB on iPod Camera
Connector.
If iPod is put to sleep while Camera Connector is present, +5
VDC at this pin slowly drains back to 0 VDC.
Firewire Power 12 VDC (+)
Different resistances indicate accessory type:
1KOhm - iPod docking station, beeps when connected
10KOhm - Takes some iPods into photo import mode
68kOhm - makes iPhone 3g send audio through line-out without
any messages
500KOhm - related to serial communication / used to enable
serial communications Used in Dension Ice Link Plus car
interface
1MOhm - Belkin auto adaptor, iPod shuts down automatically
when power disconnected Connecting pin 21 to ground with a
1MOhm resistor does stop the ipod when power (i.e.
Firewire-12V) is cut. Looks to be that when this pin is grounded
it closes a switch so that on loss of power the Ipod shuts off.
Dock has the same Resistor.
FireWire Data TPA (-)
USB Power 5 VDC (+)
FireWire Data TPA (+)
USB Data (-)
FireWire Data TPB (-)
USB Data (+)
Pins 25 and 27 may be used in different manner. To force the
iPod 5G to charge in any case, when 'USB Power 5 VDC' (pin
23) is fed, 25 must be connected to 5V through a 10KOhm
resistor, and 27 must be connected to the Ground (for example:
pin 1) with a 10KOhm resistor.
FireWire Data TPB (+)
FireWire Ground (-)
18 3.3V
19,20 +12V
21
Accessory
Indicator/Serial
enable
22
23
24
25
26
TPA (-)
5 VDC (+)
TPA (+)
Data (-)
TPB (-)
27 Data (+)
28
TPB (+)
29,30 GND
3
2024年4月1日发(作者：向景山)
外部焊接点陈列为:
1 3 5 7 9 11 13 15 17 19 21 23 25 27 29
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30
接口定义为:
1 Ground (-) 地
2 Line Out - Common Ground (-) 线路输入 地
3 Line Out - R (+) R声道线路输入
4 Line Out - L (+) L声道线路输入
5 Line In - R (+) R声道线路输入
6 Line In - L (+) L声道线路输入
7
8 Video Out - Composite Video (for ipingzheimerwouls disewhene
colour when slideshow triggered) 复合视频输入
9
10
11 Seriing GND RS-232串口 地
12 Seriing TxD RS-232串口 TxD
13 Seriing RxD RS-232串口 RxD
14
15 Ground (-) 地
16 USB GND (-) USB电源负极
17
18 3.3V Power (+) 3.3V电源正极
19 Firewire Power 12 VDC (+) 1392前线12V电源 正极
20 Firewire Power 12 VDC (+) 1392前线12V电源 正极
21 Accessory Indicnext toor 附件判别接口
22 FireWire Dnext toa TPA (-) 1392前线数据 TPA(-)
23 USB Power 5 VDC (+) USB 5V 电源 正极
24 FireWire Dnext toa TPA (+) 1392前线数据 TPA(+)
25 USB Dnext toa (-) USB 数据(-)
26 FireWire Dnext toa TPB (-) 1392前线数据 TPA(-)
27 USB Dnext toa (+) USB 数据(+)
1
28 FireWire Dnext toa TPB (+) 1392前线数据 TPB(+)
29 FireWire Ground (-) 1392前线12V电源 负极
30 FireWire Ground (-) 1392前线12V电源 负极
Connector pinout for: Apple iPod, iPad and iPhone dock
30 pin connector used on the dock station for iPod, iPad and
iPhone.
Available in all Apple iPod MP3 player (iPod 1G, 2G, 3G, 4G,
5G and Nano).
This connector is used on iPod (starting from 3
rd
generation),
iPad and iPhone. It is used to connect the iPod or iPhone to various
devices: PC (via USB or FireWire IEEE1394), audio amplifier, serial
device (controlled via the Apple Accessory Protocol).
Pin
1
2
3
4
5
6
8
9
Signal
GND
GND
Right
Left
Right In
Left In
Video Out
S-Video
Chrominance
output
Description
Ground (-), internaly connected with Pin 2 on iPod motherboard
Audio and Video ground (-), internaly connected with Pin 2 on
iPod motherboard
Line Out - R (+) (Audio output, right channel)
Line Out - L(+) (Audio output, left channel)
Line In - R (+)
Line In - L (+)
Composite video output (only when the slideshow mode is active
on iPod Photo)
for iPod Color, Photo only
2
10
11
12
13
14
15
16
17
S-Video
for iPod Color, Photo only
Luminance output
GND
Tx
Rx
NC
GND
GND
NC
Serial GND
ipod sending line, Serial TxD
ipod receiving line, Serial RxD
Ground (-), internaly connected with pin 16 on iPod motherboard
USB GND (-), internaly connected with pin 15 on iPod
motherboard
3.3V Power (+)
Stepped up to provide +5 VDC to USB on iPod Camera
Connector.
If iPod is put to sleep while Camera Connector is present, +5
VDC at this pin slowly drains back to 0 VDC.
Firewire Power 12 VDC (+)
Different resistances indicate accessory type:
1KOhm - iPod docking station, beeps when connected
10KOhm - Takes some iPods into photo import mode
68kOhm - makes iPhone 3g send audio through line-out without
any messages
500KOhm - related to serial communication / used to enable
serial communications Used in Dension Ice Link Plus car
interface
1MOhm - Belkin auto adaptor, iPod shuts down automatically
when power disconnected Connecting pin 21 to ground with a
1MOhm resistor does stop the ipod when power (i.e.
Firewire-12V) is cut. Looks to be that when this pin is grounded
it closes a switch so that on loss of power the Ipod shuts off.
Dock has the same Resistor.
FireWire Data TPA (-)
USB Power 5 VDC (+)
FireWire Data TPA (+)
USB Data (-)
FireWire Data TPB (-)
USB Data (+)
Pins 25 and 27 may be used in different manner. To force the
iPod 5G to charge in any case, when 'USB Power 5 VDC' (pin
23) is fed, 25 must be connected to 5V through a 10KOhm
resistor, and 27 must be connected to the Ground (for example:
pin 1) with a 10KOhm resistor.
FireWire Data TPB (+)
FireWire Ground (-)
18 3.3V
19,20 +12V
21
Accessory
Indicator/Serial
enable
22
23
24
25
26
TPA (-)
5 VDC (+)
TPA (+)
Data (-)
TPB (-)
27 Data (+)
28
TPB (+)
29,30 GND
3