2024年4月6日发(作者：壬温)
EnGenius ESR6650 and FlashNet K3520/K3715/E220 Configuration Guide
Step 1: Connect your EnGenius 3G Wireless Router to your PC via a network cable (CAT5) to the LAN
port or via wireless on your computer.
Step 2: Connect your FlashNet K3520/K3715/E220 into the USB port of the router located on the rear
panel.
1
Step 3: If connected via LAN cable, launch your Internet browser, and type in the following address:
192.168.0.1
with the default username: admin and password: admin to login the router
configuration interface.
If connecting the router to your PC via wireless, you will first need to enable WiFi on the PC and perform
a wireless network scan to detect the router and click on “connect”. Then enter the address as in step 2
to access the router configuration window.
Step 4: On the router configuration interface, follow the wizard and click “Next”.
2
Step 5: Select “AP Router Mode” and click “Next”.
Step 6: The router will automatically begin detecting the available network services.
3
Step 7: Select option 1 “3G” and click “Next”.
Step 8: Enter the following information and click “Next”.
ISP: Others
APN Code:
Dial Number: *99#
4
Step 9: Set your security level (WPA2/PSK), SSID and security key for your wireless router and click
“Next”.
Step 10: You have successfully configured your 3G wireless router. Click “Reboot” to restart the router
and you may wish to reconnect to start browsing the internet.
5
2024年4月6日发(作者：壬温)
EnGenius ESR6650 and FlashNet K3520/K3715/E220 Configuration Guide
Step 1: Connect your EnGenius 3G Wireless Router to your PC via a network cable (CAT5) to the LAN
port or via wireless on your computer.
Step 2: Connect your FlashNet K3520/K3715/E220 into the USB port of the router located on the rear
panel.
1
Step 3: If connected via LAN cable, launch your Internet browser, and type in the following address:
192.168.0.1
with the default username: admin and password: admin to login the router
configuration interface.
If connecting the router to your PC via wireless, you will first need to enable WiFi on the PC and perform
a wireless network scan to detect the router and click on “connect”. Then enter the address as in step 2
to access the router configuration window.
Step 4: On the router configuration interface, follow the wizard and click “Next”.
2
Step 5: Select “AP Router Mode” and click “Next”.
Step 6: The router will automatically begin detecting the available network services.
3
Step 7: Select option 1 “3G” and click “Next”.
Step 8: Enter the following information and click “Next”.
ISP: Others
APN Code:
Dial Number: *99#
4
Step 9: Set your security level (WPA2/PSK), SSID and security key for your wireless router and click
“Next”.
Step 10: You have successfully configured your 3G wireless router. Click “Reboot” to restart the router
and you may wish to reconnect to start browsing the internet.
5