2024年4月7日发(作者:青慧云)
1
DELL S2719HS
Go to contents page
1. Disassembly Procedures:
Open the Pizza carton with a proper tool.
S1
Take out all of the accessories including QSG, DP
cable, power cable, USB cable, CD&user’s manual,
S2
stand and base from the carton from the
carton.(Note: It depends on whether users returning
the accessories)
QSG
power cable
DP cable
USB cable
base
stand
user’s manual
Take out of the Paper-top and monitor from the
S3
carton, then take out the monitor from the EPE bag
and put the LCD monitor on a protective cushion.
Use a Philips-head screwdriver to remove four
S4
screws for unlocking mechanisms.
(No.1~4 screw size=M4x10; Torque=12
±
0.5kgfxcm)
2
3
4
1
Wedge your fingers between the rear cover and the
middle bezel on the corners of the top side of the
S5
monitor to release the rear cover, then use one hand
to press the middle bezel, the other hand to pull up
carefully the rear cover in order of arrow preference
for unlocking mechanisms of rear cover.
.
3
4
2
1
Lift the rear cover up carefully. Disconnect the USB
S6
FFC cable from the connector of the interface board,
and then remove the rear cover.
Use a Philips-head screwdriver to remove one screw
S7
for unlocking the USB board unit, then release the
USB board unit and put it aside.
(No.1 screw size=M3x6, Torque=4
±
0.5kgfxcm)
1
Use a proper tool to release the function key cable
S8
from the connector, then pull the function key cable
high for releasing the function key cable.
Tear off one piece of the aluminium foils for unfixing
S9
the bracket chassis base. Release the panel lamp
cable from the hooks of the middle bezel.
aluminum foil
Use a Philips-head screwdriver to remove 2pcs
S10
screws for unlocking the bracket with the panel.
(No.1~2 screw size=M3x2.8, Torque=2~3kgfxcm)
2
1
DELL S2719HS
2
Go to contents page
Use a Philips-head screwdriver to remove 15pcs
screws for unlocking the middle bezel with the
S11
assembled unit.
(No.1~13 screw size=M3x4, Torque=3~4kgfxcm;
No.14~15 screw size=M1.6x1.7, Torque=0.6~1kgfxcm)
2
12
4
1
5
13
3
8
9
6
7
10
11
14
15
Take away the middle bezel, and put it on a fixture,
S12
then use a Philips-head screwdriver to remove 3pcs
screws for unlocking the function key board with the
middle bezel
.
3
2
1
Lift up the panel module with the bracket chassis for
S13
releasing the front bezel away from the panel
module.
2024年4月7日发(作者:青慧云)
1
DELL S2719HS
Go to contents page
1. Disassembly Procedures:
Open the Pizza carton with a proper tool.
S1
Take out all of the accessories including QSG, DP
cable, power cable, USB cable, CD&user’s manual,
S2
stand and base from the carton from the
carton.(Note: It depends on whether users returning
the accessories)
QSG
power cable
DP cable
USB cable
base
stand
user’s manual
Take out of the Paper-top and monitor from the
S3
carton, then take out the monitor from the EPE bag
and put the LCD monitor on a protective cushion.
Use a Philips-head screwdriver to remove four
S4
screws for unlocking mechanisms.
(No.1~4 screw size=M4x10; Torque=12
±
0.5kgfxcm)
2
3
4
1
Wedge your fingers between the rear cover and the
middle bezel on the corners of the top side of the
S5
monitor to release the rear cover, then use one hand
to press the middle bezel, the other hand to pull up
carefully the rear cover in order of arrow preference
for unlocking mechanisms of rear cover.
.
3
4
2
1
Lift the rear cover up carefully. Disconnect the USB
S6
FFC cable from the connector of the interface board,
and then remove the rear cover.
Use a Philips-head screwdriver to remove one screw
S7
for unlocking the USB board unit, then release the
USB board unit and put it aside.
(No.1 screw size=M3x6, Torque=4
±
0.5kgfxcm)
1
Use a proper tool to release the function key cable
S8
from the connector, then pull the function key cable
high for releasing the function key cable.
Tear off one piece of the aluminium foils for unfixing
S9
the bracket chassis base. Release the panel lamp
cable from the hooks of the middle bezel.
aluminum foil
Use a Philips-head screwdriver to remove 2pcs
S10
screws for unlocking the bracket with the panel.
(No.1~2 screw size=M3x2.8, Torque=2~3kgfxcm)
2
1
DELL S2719HS
2
Go to contents page
Use a Philips-head screwdriver to remove 15pcs
screws for unlocking the middle bezel with the
S11
assembled unit.
(No.1~13 screw size=M3x4, Torque=3~4kgfxcm;
No.14~15 screw size=M1.6x1.7, Torque=0.6~1kgfxcm)
2
12
4
1
5
13
3
8
9
6
7
10
11
14
15
Take away the middle bezel, and put it on a fixture,
S12
then use a Philips-head screwdriver to remove 3pcs
screws for unlocking the function key board with the
middle bezel
.
3
2
1
Lift up the panel module with the bracket chassis for
S13
releasing the front bezel away from the panel
module.