2024年4月12日发(作者：贾军)

secsgem协议中的S9指令

S1F1: Are you there required

Set whether connection confirmation will be performed

periodically using S1F1

if specified at 0 second,this them will not be used

S1F1=>S1F2。

S1F3:Selected Equipment Status Report(SVID)

S1F3=>S1F4

S2F13: Equipment Constant Request(ECID)

S2F13=>S2F14

S7F19:获取当前机器上的所有Recipe Name，机器通过回复S7F20显

示当前所有的Recipe的列表

S7F19=>S7F20

S7F17:Delete Process Program Send(删除Recipe)

S7F17=>S7F18

S7F1: 向机器申请需要上传的Recipe Name和所需磁盘上文件的大小

S7F1=>S7F2

S7F3:将本地Recipe程序发送到机器上

S7F3=>S7F4

S2F33:Define Report

S2F33=>S2F34

S2F35:Link Event Report

The purpose of this message for the host is to link plural

reports to an event(CEID).

Default of these linked event reports became disabled

The occurrence of an event would not cause the report to be

send until enabled

S2F35=>S2F36。

S2F37:Enable/Disable Event Report

S2F37=>S2F38

S6F11:Event Reprot Send(机器通过事件主动发送通过S6F11接收)

2024年4月12日发(作者：贾军)

secsgem协议中的S9指令

S1F1: Are you there required

Set whether connection confirmation will be performed

periodically using S1F1

if specified at 0 second,this them will not be used

S1F1=>S1F2。

S1F3:Selected Equipment Status Report(SVID)

S1F3=>S1F4

S2F13: Equipment Constant Request(ECID)

S2F13=>S2F14

S7F19:获取当前机器上的所有Recipe Name，机器通过回复S7F20显

示当前所有的Recipe的列表

S7F19=>S7F20

S7F17:Delete Process Program Send(删除Recipe)

S7F17=>S7F18

S7F1: 向机器申请需要上传的Recipe Name和所需磁盘上文件的大小

S7F1=>S7F2

S7F3:将本地Recipe程序发送到机器上

S7F3=>S7F4

S2F33:Define Report

S2F33=>S2F34

S2F35:Link Event Report

The purpose of this message for the host is to link plural

reports to an event(CEID).

Default of these linked event reports became disabled

The occurrence of an event would not cause the report to be

send until enabled

S2F35=>S2F36。

S2F37:Enable/Disable Event Report

S2F37=>S2F38

S6F11:Event Reprot Send(机器通过事件主动发送通过S6F11接收)