最新消息: USBMI致力于为网友们分享Windows、安卓、IOS等主流手机系统相关的资讯以及评测、同时提供相关教程、应用、软件下载等服务。

MaterialsScienceandEngineeringA材料科学与工程A卷Vol.589

IT圈 admin 34浏览 0评论

2024年4月13日发(作者:魏融)

Materials Science and Engineering: A

材料科学与工程:A卷

Vol.589, 1 Jan. 2014

目次信息

篇名:Micro–macro-characterisation and modelling of mechanical

properties of gas metal arc welded (GMAW) DP600 steel

采用气体金属电弧焊接的DP600钢的微–宏观表征及力学性能建模

作者:A. Ramazani, K. Mukherjee, A. Abdurakhmanov, U. Prahl, M. Schleser,

U. Reisgen, W. Bleck

篇名:Deformation behavior in the isothermal compression of

Ti–5Al–5Mo–5V–1Cr–1Fe alloy

Ti-5Al-5Mo-5V-1Cr-1Fe合金的等温压缩变形行为

作者:S.F. Liu, M.Q. Li, J. Luo, Z. Yang

篇名:Dynamic recrystallization kinetics in α phase of as-cast

Ti–6Al–2Zr–1Mo–1V alloy during compression at different temperatures

and strain rates

铸态Ti-6Al-2Zr-1Mo-1V合金在不同的温度和应变率下压缩时α相的动态

再结晶动力学

作者:Guo-zheng Quan, Dong-sen Wu, Gui-chang Luo, Yu-feng Xia, Jie Zhou,

Qing Liu, Lin Gao

篇名:Effect of dynamic strain aging on isotropic hardening in low cycle

fatigue for carbon manganese steel

动态应变时效对碳锰钢在低周期疲劳下各向同性硬化的影响

作者:Zhi Yong Huang, Jean-Louis Chaboche, Qing Yuan Wang, Danièle

Wagner, Claude Bathias

篇名:Hot deformation mechanisms, microstructure and texture evolution

in extruded AZ31–nano-alumina composite

受挤压的 AZ31纳米氧化铝复合材料的热变形机制、微观结构以及织构演

作者:T. Zhong, K.P. Rao, Y.V.R.K. Prasad, F. Zhao, M. Gupta

篇名:The method for reproducing fine grained HAZ of W strengthened

high Cr steel

用于再现强化高Cr钢钨细粒HAZ的方法

作者:Xue Wang, Qiang Xu, Hong-wei Liu, Hong Liu, Wei Shang, Yao-yao

Ren, Shu-min Yu

篇名:Influence of Mn solute content on grain size reduction and improved

strength in mechanically alloyed Al–Mn alloys

锰溶质浓度对晶粒尺寸的减小和改进机械合金化的铝锰合金的强度的影

作者:K.A. Darling, A.J. Roberts, L. Armstrong, D. Kapoor, M.A. Tschopp,

L.J. Kecskes, S.N. Mathaudhu

篇名:Self-consistent modelling of lattice strains during the in-situ tensile

loading of twinning induced plasticity steel

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

孪生诱发塑性钢的原位拉伸加载过程中的晶格应变自洽建模

作者:Ahmed A. Saleh, Elena V. Pereloma, Bjørn Clausen, Donald W. Brown,

Carlos N. Tomé, Azdiar A. Gazder

篇名:Constitutive description of high temperature flow behavior of

Sanicro-28 super-austenitic stainless steel

对sanicro-28超级奥氏体不锈钢的高温流动行为的本构描述

作者:A. Mirzaei, A. Zarei-Hanzaki, N. Haghdadi, A. Marandi

篇名:Influence of raw material selection and fabrication parameters on

microstructure and properties of micro-laminated TiB

2

–TiAl composite

sheets

原材料的选择和工艺参数对微叠层TiB

2

–TiAl基复合材料板材的微观结构

和性能的影响

作者:Xiping Cui, Guohua Fan, Lin Geng, Hao Wu, Jincheng Pang, Jinxin

Gong

篇名:Stress-induced thickening of Ω phase in Al–Cu–Mg alloys containing

various Ag additions

在含有各种银附加物的铝-铜-镁合金中的压力诱导Ω相增

作者:Song Bai, Zhiyi Liu, Xuanwei Zhou, Peng Xia, Meng Liu

篇名:Effect of plate-like alumina on the properties of alumina ceramics

prepared by gel-casting

板状氧化铝对用凝胶浇注法制备的氧化铝陶瓷性能的影响

作者:Meiqi Cao, Qingzhi Yan, Xianhui Li, Yingying Mi

篇名:Microstructure–properties relationship in a one-step quenched and

partitioned steel

一步淬火和分段钢化之间的微观结构性能关联

作者:Xiaodong Tan, Yunbo Xu, Xiaolong Yang, Di Wu

篇名:Influence of stored energy on twin formation during primary

recrystallization

储存能量对一次再结晶中双形成的影响

作者:W. Wang, F. Brisset, A.L. Helbert, D. Solas, I. Drouelle, M.H. Mathon, T.

Baudin

篇名:Effect of Si addition on the microstructure and mechanical

properties of ECAPed Mg–15Al alloy

施硅对ECAPed Mg-15Al合金的显微组织和力学性能的影响

作者:Hongxia Wang, Bin Zhou, Yuantao Zhao, Kangkang Zhou, Weili Cheng,

Wei Liang

篇名:Creep of polycrystalline yttrium aluminum garnet (YAG) at elevated

temperature in air and in steam

在空气和蒸汽温度升高时多晶钇铝石榴石(YAG)的蠕变

作者:C.J. Armani, M.B. Ruggles-Wrenn, R.S. Hay, G.E. Fair, K.A. Keller

篇名:Motion of screw segments in the early stage of fatigue testing

在疲劳试验初期螺杆段的运动

作者:Yichao Zhu, Stephen Jonathan Chapman

篇名:An in-situ transmission electron microscopy study on room

19

20

21

22

23

24

25

26

27

temperature ductility of TiAl alloys with fully lamellar microstructure

关于具有全层状微观结构的钛铝合金的室温塑性的一种原位透射电子显

微镜研究

作者:Seong-Woong Kim, Young-Sang Na, Jong-Taek Yeom, Seung Eon Kim,

Yoon Suk Choi

篇名:Significance of crystallographic misorientation at phase boundaries

for fatigue crack initiation in a duplex stainless steel during high and very

high cycle fatigue loading

双相不锈钢在高和非常高的循环疲劳载荷作用下,其疲劳裂纹扩展区的相

界的结晶错位的意义

作者:B. Dönges, A. Giertler, U. Krupp, C.-P. Fritzen, H.-J. Christ

篇名:Microstructure evolution and mechanical properties of Inconel 740H

during aging at 750 °C

经过在750°C老化的铬镍铁合金740H的微观结构演化及其力学性能

作者:Chong Yan, Liu Zhengdong, Andy Godfrey, Liu Wei, Weng Yuqing

篇名:Effects of boron addition on tensile and Charpy impact properties in

high-phosphorous steels

硼对高磷钢的拉伸强度和夏比冲击性能的影响

作者:Seokmin Hong, Junghoon Lee, Kyong Su Park, Sunghak Lee

篇名:Microstructure–texture–mechanical properties relationship in

multi-pass warm rolled Ti–6Al–4V Alloy

在多通道温轧的 Ti–6Al–4V合金中,微观结构与纹理、力学性能之间的关

作者:S.V.S. Narayana Murty, Niraj Nayan, Pankaj Kumar, P. Ramesh

Narayanan, S.C. Sharma, Koshy M. George

篇名:Effects of casting temperature on the microstructure and mechanical

properties of the TiZr-based bulk metallic glass matrix composite

浇铸温度对钛锆基大块金属玻璃基体复合材料的微观结构和力学性能的

影响

作者:P.F. Sha, Z.W. Zhu, H.M. Fu, H. Li, A.M. Wang, H.W. Zhang, H.F.

Zhang, Z.Q. Hu

篇名:The effect of aging on heat-resistant cast stainless steels

老化对耐热铸造不锈钢的影响

作者:M. Viherkoski, E. Huttunen-Saarivirta, E. Isotahdon, M. Uusitalo, T.

Tiainen, V.-T. Kuokkala

篇名:Effect of SPD surface layer on plasma nitriding of Ti–6Al–4V alloy

电涌保护器(SPD)表面层对Ti 6Al 4V合金的等离子渗氮的影响

作者:K. Farokhzadeh, J. Qian, A. Edrisy

篇名:A study of fatigue damage development in extruded Mg–Gd–Y

magnesium alloy

受挤压的Mg–GD–Y镁合金的疲劳损伤发展的研究

作者:Fenghua Wang, Jie Dong, Miaolin Feng, Jie Sun, Wenjiang Ding,

Yanyao Jiang

篇名:Grain size and particle dispersion effects on the tensile behavior of

28

29

30

31

32

33

34

35

36

friction stir welded MA956 oxide dispersion strengthened steel from low to

elevated temperatures

晶粒尺寸和颗粒分散对搅拌摩擦焊接MA956氧化物弥散强化钢从低温到

高温下的拉伸性能的影响

作者:B.W. Baker, T.R. McNelley, L.N. Brewer

篇名:The microstructure and mechanical properties of friction stir welded

Cu–30Zn brass alloys

搅拌摩擦焊接的Cu-30Zn黄铜合金的微观结构和力学性能

作者:Y.F. Sun, N. Xu, H. Fujii

篇名:Effect of martensitic phase transformation on the hardening

behavior and texture evolution in a 304L stainless steel under compression

at liquid nitrogen temperature

马氏体相变对304L不锈钢在液氮温度下压缩后的硬化行为和组织演变的

影响

作者:Ercan Cakmak, Sven C. Vogel, Hahn Choo

篇名:Separation of nucleation and growth of voids during tensile

deformation of a dual phase steel using synchrotron microtomography

对双相钢利用同步辐射成像法进行拉伸变形过程中的成核分离与空隙生

作者:Guillermo Requena, Eric Maire, Claire Leguen, Sandrine Thuillier

篇名:The dynamic behaviour of a twinning induced plasticity steel

孪生诱发塑性钢的动态行为

作者:K.M. Rahman, V.A. Vorontsov, D. Dye

篇名:A dynamic ductile fracture model on the effects of pressure, Lode

angle and strain rate

一个关于压力、洛德角和应变率效果的动态韧性断裂模型

作者:Y.J. Liu, Q. Sun

篇名:Damping and dynamic recovery in magnesium alloys containing

strontium

含锶镁合金中的阻尼和动态恢复

作者:K. Hazeli, A. Sadeghi, M.O. Pekguleryuz, A. Kontsos

篇名:The static and dynamic mechanical properties of a new low-carbon,

low-alloy austempered steel

一种新的低碳,低合金奥贝钢的静态和动态力学性能

作者:Codrick J. Martis, Susil K. Putatunda, James Boileau, John G. Spray

篇名:Analysis of the stress states and interface damage in a particle

reinforced composite based on a micromodel using cohesive elements

运用内聚单元对基于微观模型的粒子增强复合材料中的应力状态和界面

损伤进行分析

作者:Zhanwei Yuan, Fuguo Li, Fengmei Xue, Min He, Mirza Zahid Hussain

篇名:On low temperature bainite transformation characteristics using

in-situ neutron diffraction and atom probe tomography

使用原位中子衍射和原子探针装置实现低温贝氏体转变特性

作者:Khushboo Rakha, Hossein Beladi, Ilana Timokhina, Xiangyuan Xiong,

37

Saurabh Kabra, Klaus-Dieter Liss, Peter Hodgson

篇名:Achieving friction stir welded SiCp/Al–Cu–Mg composite joint of

nearly equal strength to base material at high welding speed

在较高焊接速度下,实现强度几乎等于基础材料的搅拌摩擦焊接

SiCp/Al–Cu–Mg复合接头的方法

作者:D. Wang, Q.Z. Wang, B.L. Xiao, Z.Y. Ma

2024年4月13日发(作者:魏融)

Materials Science and Engineering: A

材料科学与工程:A卷

Vol.589, 1 Jan. 2014

目次信息

篇名:Micro–macro-characterisation and modelling of mechanical

properties of gas metal arc welded (GMAW) DP600 steel

采用气体金属电弧焊接的DP600钢的微–宏观表征及力学性能建模

作者:A. Ramazani, K. Mukherjee, A. Abdurakhmanov, U. Prahl, M. Schleser,

U. Reisgen, W. Bleck

篇名:Deformation behavior in the isothermal compression of

Ti–5Al–5Mo–5V–1Cr–1Fe alloy

Ti-5Al-5Mo-5V-1Cr-1Fe合金的等温压缩变形行为

作者:S.F. Liu, M.Q. Li, J. Luo, Z. Yang

篇名:Dynamic recrystallization kinetics in α phase of as-cast

Ti–6Al–2Zr–1Mo–1V alloy during compression at different temperatures

and strain rates

铸态Ti-6Al-2Zr-1Mo-1V合金在不同的温度和应变率下压缩时α相的动态

再结晶动力学

作者:Guo-zheng Quan, Dong-sen Wu, Gui-chang Luo, Yu-feng Xia, Jie Zhou,

Qing Liu, Lin Gao

篇名:Effect of dynamic strain aging on isotropic hardening in low cycle

fatigue for carbon manganese steel

动态应变时效对碳锰钢在低周期疲劳下各向同性硬化的影响

作者:Zhi Yong Huang, Jean-Louis Chaboche, Qing Yuan Wang, Danièle

Wagner, Claude Bathias

篇名:Hot deformation mechanisms, microstructure and texture evolution

in extruded AZ31–nano-alumina composite

受挤压的 AZ31纳米氧化铝复合材料的热变形机制、微观结构以及织构演

作者:T. Zhong, K.P. Rao, Y.V.R.K. Prasad, F. Zhao, M. Gupta

篇名:The method for reproducing fine grained HAZ of W strengthened

high Cr steel

用于再现强化高Cr钢钨细粒HAZ的方法

作者:Xue Wang, Qiang Xu, Hong-wei Liu, Hong Liu, Wei Shang, Yao-yao

Ren, Shu-min Yu

篇名:Influence of Mn solute content on grain size reduction and improved

strength in mechanically alloyed Al–Mn alloys

锰溶质浓度对晶粒尺寸的减小和改进机械合金化的铝锰合金的强度的影

作者:K.A. Darling, A.J. Roberts, L. Armstrong, D. Kapoor, M.A. Tschopp,

L.J. Kecskes, S.N. Mathaudhu

篇名:Self-consistent modelling of lattice strains during the in-situ tensile

loading of twinning induced plasticity steel

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

孪生诱发塑性钢的原位拉伸加载过程中的晶格应变自洽建模

作者:Ahmed A. Saleh, Elena V. Pereloma, Bjørn Clausen, Donald W. Brown,

Carlos N. Tomé, Azdiar A. Gazder

篇名:Constitutive description of high temperature flow behavior of

Sanicro-28 super-austenitic stainless steel

对sanicro-28超级奥氏体不锈钢的高温流动行为的本构描述

作者:A. Mirzaei, A. Zarei-Hanzaki, N. Haghdadi, A. Marandi

篇名:Influence of raw material selection and fabrication parameters on

microstructure and properties of micro-laminated TiB

2

–TiAl composite

sheets

原材料的选择和工艺参数对微叠层TiB

2

–TiAl基复合材料板材的微观结构

和性能的影响

作者:Xiping Cui, Guohua Fan, Lin Geng, Hao Wu, Jincheng Pang, Jinxin

Gong

篇名:Stress-induced thickening of Ω phase in Al–Cu–Mg alloys containing

various Ag additions

在含有各种银附加物的铝-铜-镁合金中的压力诱导Ω相增

作者:Song Bai, Zhiyi Liu, Xuanwei Zhou, Peng Xia, Meng Liu

篇名:Effect of plate-like alumina on the properties of alumina ceramics

prepared by gel-casting

板状氧化铝对用凝胶浇注法制备的氧化铝陶瓷性能的影响

作者:Meiqi Cao, Qingzhi Yan, Xianhui Li, Yingying Mi

篇名:Microstructure–properties relationship in a one-step quenched and

partitioned steel

一步淬火和分段钢化之间的微观结构性能关联

作者:Xiaodong Tan, Yunbo Xu, Xiaolong Yang, Di Wu

篇名:Influence of stored energy on twin formation during primary

recrystallization

储存能量对一次再结晶中双形成的影响

作者:W. Wang, F. Brisset, A.L. Helbert, D. Solas, I. Drouelle, M.H. Mathon, T.

Baudin

篇名:Effect of Si addition on the microstructure and mechanical

properties of ECAPed Mg–15Al alloy

施硅对ECAPed Mg-15Al合金的显微组织和力学性能的影响

作者:Hongxia Wang, Bin Zhou, Yuantao Zhao, Kangkang Zhou, Weili Cheng,

Wei Liang

篇名:Creep of polycrystalline yttrium aluminum garnet (YAG) at elevated

temperature in air and in steam

在空气和蒸汽温度升高时多晶钇铝石榴石(YAG)的蠕变

作者:C.J. Armani, M.B. Ruggles-Wrenn, R.S. Hay, G.E. Fair, K.A. Keller

篇名:Motion of screw segments in the early stage of fatigue testing

在疲劳试验初期螺杆段的运动

作者:Yichao Zhu, Stephen Jonathan Chapman

篇名:An in-situ transmission electron microscopy study on room

19

20

21

22

23

24

25

26

27

temperature ductility of TiAl alloys with fully lamellar microstructure

关于具有全层状微观结构的钛铝合金的室温塑性的一种原位透射电子显

微镜研究

作者:Seong-Woong Kim, Young-Sang Na, Jong-Taek Yeom, Seung Eon Kim,

Yoon Suk Choi

篇名:Significance of crystallographic misorientation at phase boundaries

for fatigue crack initiation in a duplex stainless steel during high and very

high cycle fatigue loading

双相不锈钢在高和非常高的循环疲劳载荷作用下,其疲劳裂纹扩展区的相

界的结晶错位的意义

作者:B. Dönges, A. Giertler, U. Krupp, C.-P. Fritzen, H.-J. Christ

篇名:Microstructure evolution and mechanical properties of Inconel 740H

during aging at 750 °C

经过在750°C老化的铬镍铁合金740H的微观结构演化及其力学性能

作者:Chong Yan, Liu Zhengdong, Andy Godfrey, Liu Wei, Weng Yuqing

篇名:Effects of boron addition on tensile and Charpy impact properties in

high-phosphorous steels

硼对高磷钢的拉伸强度和夏比冲击性能的影响

作者:Seokmin Hong, Junghoon Lee, Kyong Su Park, Sunghak Lee

篇名:Microstructure–texture–mechanical properties relationship in

multi-pass warm rolled Ti–6Al–4V Alloy

在多通道温轧的 Ti–6Al–4V合金中,微观结构与纹理、力学性能之间的关

作者:S.V.S. Narayana Murty, Niraj Nayan, Pankaj Kumar, P. Ramesh

Narayanan, S.C. Sharma, Koshy M. George

篇名:Effects of casting temperature on the microstructure and mechanical

properties of the TiZr-based bulk metallic glass matrix composite

浇铸温度对钛锆基大块金属玻璃基体复合材料的微观结构和力学性能的

影响

作者:P.F. Sha, Z.W. Zhu, H.M. Fu, H. Li, A.M. Wang, H.W. Zhang, H.F.

Zhang, Z.Q. Hu

篇名:The effect of aging on heat-resistant cast stainless steels

老化对耐热铸造不锈钢的影响

作者:M. Viherkoski, E. Huttunen-Saarivirta, E. Isotahdon, M. Uusitalo, T.

Tiainen, V.-T. Kuokkala

篇名:Effect of SPD surface layer on plasma nitriding of Ti–6Al–4V alloy

电涌保护器(SPD)表面层对Ti 6Al 4V合金的等离子渗氮的影响

作者:K. Farokhzadeh, J. Qian, A. Edrisy

篇名:A study of fatigue damage development in extruded Mg–Gd–Y

magnesium alloy

受挤压的Mg–GD–Y镁合金的疲劳损伤发展的研究

作者:Fenghua Wang, Jie Dong, Miaolin Feng, Jie Sun, Wenjiang Ding,

Yanyao Jiang

篇名:Grain size and particle dispersion effects on the tensile behavior of

28

29

30

31

32

33

34

35

36

friction stir welded MA956 oxide dispersion strengthened steel from low to

elevated temperatures

晶粒尺寸和颗粒分散对搅拌摩擦焊接MA956氧化物弥散强化钢从低温到

高温下的拉伸性能的影响

作者:B.W. Baker, T.R. McNelley, L.N. Brewer

篇名:The microstructure and mechanical properties of friction stir welded

Cu–30Zn brass alloys

搅拌摩擦焊接的Cu-30Zn黄铜合金的微观结构和力学性能

作者:Y.F. Sun, N. Xu, H. Fujii

篇名:Effect of martensitic phase transformation on the hardening

behavior and texture evolution in a 304L stainless steel under compression

at liquid nitrogen temperature

马氏体相变对304L不锈钢在液氮温度下压缩后的硬化行为和组织演变的

影响

作者:Ercan Cakmak, Sven C. Vogel, Hahn Choo

篇名:Separation of nucleation and growth of voids during tensile

deformation of a dual phase steel using synchrotron microtomography

对双相钢利用同步辐射成像法进行拉伸变形过程中的成核分离与空隙生

作者:Guillermo Requena, Eric Maire, Claire Leguen, Sandrine Thuillier

篇名:The dynamic behaviour of a twinning induced plasticity steel

孪生诱发塑性钢的动态行为

作者:K.M. Rahman, V.A. Vorontsov, D. Dye

篇名:A dynamic ductile fracture model on the effects of pressure, Lode

angle and strain rate

一个关于压力、洛德角和应变率效果的动态韧性断裂模型

作者:Y.J. Liu, Q. Sun

篇名:Damping and dynamic recovery in magnesium alloys containing

strontium

含锶镁合金中的阻尼和动态恢复

作者:K. Hazeli, A. Sadeghi, M.O. Pekguleryuz, A. Kontsos

篇名:The static and dynamic mechanical properties of a new low-carbon,

low-alloy austempered steel

一种新的低碳,低合金奥贝钢的静态和动态力学性能

作者:Codrick J. Martis, Susil K. Putatunda, James Boileau, John G. Spray

篇名:Analysis of the stress states and interface damage in a particle

reinforced composite based on a micromodel using cohesive elements

运用内聚单元对基于微观模型的粒子增强复合材料中的应力状态和界面

损伤进行分析

作者:Zhanwei Yuan, Fuguo Li, Fengmei Xue, Min He, Mirza Zahid Hussain

篇名:On low temperature bainite transformation characteristics using

in-situ neutron diffraction and atom probe tomography

使用原位中子衍射和原子探针装置实现低温贝氏体转变特性

作者:Khushboo Rakha, Hossein Beladi, Ilana Timokhina, Xiangyuan Xiong,

37

Saurabh Kabra, Klaus-Dieter Liss, Peter Hodgson

篇名:Achieving friction stir welded SiCp/Al–Cu–Mg composite joint of

nearly equal strength to base material at high welding speed

在较高焊接速度下,实现强度几乎等于基础材料的搅拌摩擦焊接

SiCp/Al–Cu–Mg复合接头的方法

作者:D. Wang, Q.Z. Wang, B.L. Xiao, Z.Y. Ma

发布评论

评论列表 (0)

  1. 暂无评论