2024年4月15日发(作者：闳如之)
HS507K X2
Reflex Sight
User's Manual
Thank you for purchasing the HOLOSUN HS507K X2 Open
Reflex sight. This open reflex red dot sight is sized for use on
either a pistol or rifle. The stream lined design and compact
size make it the ideal sight for concealed carry. Before
operation, please read the User's Manual carefully.
Red Circle Dot
Important
Notices
1. Ensure the firearm is unloaded and safe
by removing all ammunition and magazines
from the firearm and verify an empty
chamber before installation and battery
replacement.
2. Please keep the packaging should you
need to make a warranty claim.
Model
Multi-Reticle System
Default
3S
3S
RED
Circle Dot
Fig 3
The default reticle for this sight is a 2MOA dot centered in a
32MOA circle with four positioning points.
The diameter of the circle reticle represents approximately
32" at 100 yards (81cm at 100 meters).Hold the "-" button
down 3 seconds to switch between the three reticles (Circle
+Dot, Dot and Circle) in that order.
Fig 1 HS507K X2 Reflex sight
Objective Lens
Battery
1. One high quality CR1632 Lithium battery is included with
purchase.
Caution: Do not use a rechargeable battery.
2. A high quality battery can power this device for up to
10000 hours (dot+circle) or 50000 hours (dot)at setting 6.
y Replacement(Fig4):
a. Removing the battery :
I. Remove the battery tray screw.
ii. Use the included tool as a lever in the battery tray slots to
remove the battery tray and battery.
b. Battery installation :
I. Insert the battery into the battery tray with the POSITIVE
side facing DOWN.
ii. Insert and press the tray into the battery compartment.
iii. Tighten the battery tray screw.
Battery
compartment
CR 1632
Battery
Slot
Fig2
A canted objective lens is part of the design of
reflex/reflective optical sights. In order to create a proper
reflection of the reticle/dot the objective lens must be
perpendicular to the LED. Because the LED is mounted to the
side of the internal tube the objective lens will be canted in
that direction.
Features
1) Ultra compact size for concealed carry applications.
2) Three Reticle Options: 32MOA circle and dot,2MOA dot
only and 32MOA circle only.
3) Shake Awake
TM
- Motion on with last setting recall.
4) Parallax free, unlimited eye relief.
5) CNC milled 7075 Aluminum Housing.
6) 10 day light and 2 night vision compatible brightness
settings.
7) Window Size 0.58x0.77 inches.
8) IP67 Certified.
1
Screw
Battery
tray
Seal ring
Fig 4
Caution:
The loss or damage of the seal ring may cause water to leak
into the compartment which could damage the product.
2
Installation on the Slide
NOTE: HS507K is compatible with some standard mounting
solutions currently available. For a footprint drawing,
contact Holosun.
1. Place the HS507K on a compatible slide cut or adapter
plate (this varies based on your slide configuration).
2. Use either the included screws or screws supplied with
your slide or from your gunsmith and tighten to 15 INCH/lbs
using a non-permanent (medium/blue) thread locker. (Fig5)
3. Verify proper clearances and firearm function prior to use.
Fig 5
Sight Operation
on: Press and release either brightness button
("+"or"-") to turn on the sight, See Fig 6.
off: Press the"+"and"-" buttons simultaneously to
turn the power and motion sensor off (this will disable Shake
Awake).
ion mode: Two modes are available in the following
order: Manual Mode -> Lockout Mode.
1) Manual mode:
Brightness adjustment: There are 12 reticle brightness
setting levels in manual mode. Settings 1 and 2 are NV
compatible and setting 12 is the brightest. Press ”+” or ”-” to
increase or decrease the brightness.
2) Lockout Mode:
Lock Mode Activation: Hold the “+” button for 3 seconds
(until the LED blinks once) to activate Lock Mode. In lock
mode buttons are locked out preventing any setting changes.
To deactivate Lock Mode, hold the “+” button for 3 seconds ,
the LED will blink once to confirm Lock Mode is deactivated.
4. Sleep time setting:
1) Please note that your red dot will automatically enter into
sleep mode after 10 minutes of no movement.
2) The sight will instantaneously wake up and turn on with
any motion detection to last saved settings.
3) The default sleep timer setting is 10 min, but can be
adjusted.
I. Press and hold the “+” button for 10 seconds to enter sleep
time adjustment mode. There are 4 options: 10 min, 1h, 12h
or the sleep mode is disabled.
ii. Press and release either “+” or “-” button to set the time.
The LED will blink (1 = 10 min, 2 = 1h, 3 = 12h, or 4 = disable
sleep mode).
iii. Press the “+” and “-” buttons simultaneously to save the
time setting and power off the sight.
5. Note:
1) Memory function: The sight will remember the last saved
brightness setting when powered on and off.
2) Low battery Warning: If the
battery voltage is below 2.2Vdc,
the reticle will blink slowly.
Brightness
increase
Fig 6
Zero Setting
Brightness
decrease
3
1) The sight has been factory zeroed to approximately
25yards and should require minimal adjustment to achieve
zero.
2) The Elevation adjustment is located on the rear section of
the housing and the Windage adjustment is located on the
right side of the housing.
3) Adjustment can be performed by inserting the flat tipped
end of the included tool into the turret slot and rotating, See
Fig 7.
4) Each adjustment click has a value of approximately 1 MOA
or 1 inch at 100 yards (1/2" at 50y; 1/4" at 25y). When
zeroing at 25 yard, if your impacts are 2 inches low and 1 inch
right, you will need to adjust Elevation 8 clicks
UP(counterclockwise) and 4 clicks LEFT (clockwise)
5) The maximum adjustment range is ±30MOA.
Caution: If you feel the knobs can
Adjustment
Elevation
no longer be rotated, you may
have reached the mechanical
limit of the adjustment turret. Do
not try to rotate the knobs
Adjustment
Windage
further if you feel a bind or you
Fig 7
may cause damage.
Included Tool:
①
1. Flat tipped end is used to adjust the
②
Windage & Elevation.
2. T10 Torx tool for screws.
Fig 8
Maintenance & Care
This device is a precision instrument that deserves
reasonably cautious care. The following tips are provided to
ensure a long product life. The optical lenses are multicoated
optical glass. When cleaning the lenses, blow away the dust
on the surface, wet the lens with lens cleaner or clean water,
then wipe away smudges with lens tissue, soft cotton or a
microfiber cloth. Avoid touching the glass surface with dry
cloth or tissue paper. Do not use organic solvents such as
alcohol or acetone. No special maintenance is needed for the
housing surface. Do not try to dismantle the device as the
internal parts are specially cleaned and sealed and with an
anti-fog treatment. Any such attempt will void the warranty.
Limited Warranty
We provide a limited lifetime warranty from the date of
purchase on parts and workmanship to the original
purchaser. At our sole discretion, we will repair or replace
products found to be defective under normal use without
charge, excluding any delivery costs, which will be born by
purchaser. We will not be liable for incidental,
consequential, or special damages arising out of or in any
connection with the use or performance of this product. This
warranty is void if the product has been misused, modified,
neglected, or disassembled prior to its return. Please refer to
for current and complete warranty
information and other conditions.
HS507K X2
Reflex Sight
Holosun Technologies Inc.
Customer Service
Phone: (909) 594-2888
Fax: (909) 598-4888
E-mail:********************
4
V1.2
2024年4月15日发(作者：闳如之)
HS507K X2
Reflex Sight
User's Manual
Thank you for purchasing the HOLOSUN HS507K X2 Open
Reflex sight. This open reflex red dot sight is sized for use on
either a pistol or rifle. The stream lined design and compact
size make it the ideal sight for concealed carry. Before
operation, please read the User's Manual carefully.
Red Circle Dot
Important
Notices
1. Ensure the firearm is unloaded and safe
by removing all ammunition and magazines
from the firearm and verify an empty
chamber before installation and battery
replacement.
2. Please keep the packaging should you
need to make a warranty claim.
Model
Multi-Reticle System
Default
3S
3S
RED
Circle Dot
Fig 3
The default reticle for this sight is a 2MOA dot centered in a
32MOA circle with four positioning points.
The diameter of the circle reticle represents approximately
32" at 100 yards (81cm at 100 meters).Hold the "-" button
down 3 seconds to switch between the three reticles (Circle
+Dot, Dot and Circle) in that order.
Fig 1 HS507K X2 Reflex sight
Objective Lens
Battery
1. One high quality CR1632 Lithium battery is included with
purchase.
Caution: Do not use a rechargeable battery.
2. A high quality battery can power this device for up to
10000 hours (dot+circle) or 50000 hours (dot)at setting 6.
y Replacement(Fig4):
a. Removing the battery :
I. Remove the battery tray screw.
ii. Use the included tool as a lever in the battery tray slots to
remove the battery tray and battery.
b. Battery installation :
I. Insert the battery into the battery tray with the POSITIVE
side facing DOWN.
ii. Insert and press the tray into the battery compartment.
iii. Tighten the battery tray screw.
Battery
compartment
CR 1632
Battery
Slot
Fig2
A canted objective lens is part of the design of
reflex/reflective optical sights. In order to create a proper
reflection of the reticle/dot the objective lens must be
perpendicular to the LED. Because the LED is mounted to the
side of the internal tube the objective lens will be canted in
that direction.
Features
1) Ultra compact size for concealed carry applications.
2) Three Reticle Options: 32MOA circle and dot,2MOA dot
only and 32MOA circle only.
3) Shake Awake
TM
- Motion on with last setting recall.
4) Parallax free, unlimited eye relief.
5) CNC milled 7075 Aluminum Housing.
6) 10 day light and 2 night vision compatible brightness
settings.
7) Window Size 0.58x0.77 inches.
8) IP67 Certified.
1
Screw
Battery
tray
Seal ring
Fig 4
Caution:
The loss or damage of the seal ring may cause water to leak
into the compartment which could damage the product.
2
Installation on the Slide
NOTE: HS507K is compatible with some standard mounting
solutions currently available. For a footprint drawing,
contact Holosun.
1. Place the HS507K on a compatible slide cut or adapter
plate (this varies based on your slide configuration).
2. Use either the included screws or screws supplied with
your slide or from your gunsmith and tighten to 15 INCH/lbs
using a non-permanent (medium/blue) thread locker. (Fig5)
3. Verify proper clearances and firearm function prior to use.
Fig 5
Sight Operation
on: Press and release either brightness button
("+"or"-") to turn on the sight, See Fig 6.
off: Press the"+"and"-" buttons simultaneously to
turn the power and motion sensor off (this will disable Shake
Awake).
ion mode: Two modes are available in the following
order: Manual Mode -> Lockout Mode.
1) Manual mode:
Brightness adjustment: There are 12 reticle brightness
setting levels in manual mode. Settings 1 and 2 are NV
compatible and setting 12 is the brightest. Press ”+” or ”-” to
increase or decrease the brightness.
2) Lockout Mode:
Lock Mode Activation: Hold the “+” button for 3 seconds
(until the LED blinks once) to activate Lock Mode. In lock
mode buttons are locked out preventing any setting changes.
To deactivate Lock Mode, hold the “+” button for 3 seconds ,
the LED will blink once to confirm Lock Mode is deactivated.
4. Sleep time setting:
1) Please note that your red dot will automatically enter into
sleep mode after 10 minutes of no movement.
2) The sight will instantaneously wake up and turn on with
any motion detection to last saved settings.
3) The default sleep timer setting is 10 min, but can be
adjusted.
I. Press and hold the “+” button for 10 seconds to enter sleep
time adjustment mode. There are 4 options: 10 min, 1h, 12h
or the sleep mode is disabled.
ii. Press and release either “+” or “-” button to set the time.
The LED will blink (1 = 10 min, 2 = 1h, 3 = 12h, or 4 = disable
sleep mode).
iii. Press the “+” and “-” buttons simultaneously to save the
time setting and power off the sight.
5. Note:
1) Memory function: The sight will remember the last saved
brightness setting when powered on and off.
2) Low battery Warning: If the
battery voltage is below 2.2Vdc,
the reticle will blink slowly.
Brightness
increase
Fig 6
Zero Setting
Brightness
decrease
3
1) The sight has been factory zeroed to approximately
25yards and should require minimal adjustment to achieve
zero.
2) The Elevation adjustment is located on the rear section of
the housing and the Windage adjustment is located on the
right side of the housing.
3) Adjustment can be performed by inserting the flat tipped
end of the included tool into the turret slot and rotating, See
Fig 7.
4) Each adjustment click has a value of approximately 1 MOA
or 1 inch at 100 yards (1/2" at 50y; 1/4" at 25y). When
zeroing at 25 yard, if your impacts are 2 inches low and 1 inch
right, you will need to adjust Elevation 8 clicks
UP(counterclockwise) and 4 clicks LEFT (clockwise)
5) The maximum adjustment range is ±30MOA.
Caution: If you feel the knobs can
Adjustment
Elevation
no longer be rotated, you may
have reached the mechanical
limit of the adjustment turret. Do
not try to rotate the knobs
Adjustment
Windage
further if you feel a bind or you
Fig 7
may cause damage.
Included Tool:
①
1. Flat tipped end is used to adjust the
②
Windage & Elevation.
2. T10 Torx tool for screws.
Fig 8
Maintenance & Care
This device is a precision instrument that deserves
reasonably cautious care. The following tips are provided to
ensure a long product life. The optical lenses are multicoated
optical glass. When cleaning the lenses, blow away the dust
on the surface, wet the lens with lens cleaner or clean water,
then wipe away smudges with lens tissue, soft cotton or a
microfiber cloth. Avoid touching the glass surface with dry
cloth or tissue paper. Do not use organic solvents such as
alcohol or acetone. No special maintenance is needed for the
housing surface. Do not try to dismantle the device as the
internal parts are specially cleaned and sealed and with an
anti-fog treatment. Any such attempt will void the warranty.
Limited Warranty
We provide a limited lifetime warranty from the date of
purchase on parts and workmanship to the original
purchaser. At our sole discretion, we will repair or replace
products found to be defective under normal use without
charge, excluding any delivery costs, which will be born by
purchaser. We will not be liable for incidental,
consequential, or special damages arising out of or in any
connection with the use or performance of this product. This
warranty is void if the product has been misused, modified,
neglected, or disassembled prior to its return. Please refer to
for current and complete warranty
information and other conditions.
HS507K X2
Reflex Sight
Holosun Technologies Inc.
Customer Service
Phone: (909) 594-2888
Fax: (909) 598-4888
E-mail:********************
4
V1.2