2024年5月18日发(作者：建友)
˾
Acids or alkaline liquids, IPA (isopropyl alcohol),
pure water, Fluorinert, Galden, etc.
˾
Body and cable are protected by PFA.
˾
Easy maintenance
*For explosion-proof applications, be sure to select a suitable
fiber type.
FEATURES
Easy maintenance
After leak detection, simply wipe the
detector surface—a much easier
process than with detection
tape or a liquid-absorbing model.
Acids or alkaline liquids, IPA
(isopropyl alcohol), pure water,
Fluorinert, Galden, etc.
Notes: For explosion-proof applications, be sure to select a suitable
fiber nert and Galden are registered trademarks of
3M and Solvay Solexis respectively.
Operation indicator
Switch status can be checked from
the body side.
Normal state (green LED lit)
Liquid leakage (red LED lit)
Body and cable are protected by PFA.
PVC brackets are available for acidic
or alkaline liquids. PFA (partially SUS) brackets
are available for organic solvents.
Suitable for export equipment
CE marking, UL certified.
Wide variety of output modes and types are available.
IP67
The cable exits the detect or through a
PFA tube fused to the case. Therefore,
leaking liquid cannot enter the detector.
•
NO/NC output
•
NPN/PNP output
DETECTION PRINCIPLE
Normal: no liquid
(light received)
Leak: liquid present
(dark)
Install this switch in the pan by stud or adhesive (for
PVC bracket type). Unlike the float type, switch does
not require a concave surface underneath.
Note: This switch is not explosion-proof. Do not use it where the use of an explosion-proof product is specified.
CATALOG LISTING
b
Body
Detection method & shapeBracket material
Operation modeOutput modeCatalog listing
Accessory
SpecificationsCatalog listing
Retroreflective
NC
PVC
NC
NO
NC
PFA
NC
NO
NC, NPN, PVC bracket type
NC, PNP, PVC bracket type
NO, NPN, PVC bracket type
NC, NPN, PFA bracket type
NC, PNP, PFA bracket type
NO, NPN, PFA bracket type
HPQ-D11
HPQ-D12
HPQ-D13
HPQ-D21
HPQ-D22
HPQ-D23
PVC bracket (10 units)
PFA(SUS) bracket (10 units)
HPQ-B01
HPQ-B02
Notes: For HPQ-D11/12/21 models, a switch with 5 m cable
(2 m PFA tube) is also available, specially produced
for the U.S. market (-L05).
Normally open type: no UL certification.
Some UL-certified models are available. For details,
contact Azbil Corporation.
Buy:|Phone844-385-3099|Email:*************************
SPECIFICATIONS
Catalog listing
HPQ-D11 / HPQ-D21HPQ-D12 / HPQ-D22
HPQ-D13 / HPQ-D23
Detection method
Retroreflective
Mounting surface
Polyvinyl chloride or stainless steel plate*
Standard target object
Water*
Light source
Infrared LED (peak emission wavelength 875 nm)
Supply voltage
10.8 to 26.4 Vdc (ripple voltage 10 % max.)
Current consumption
30 mA or less
Operation mode
Normally ON, when leak detected OFF
Normally OFF, when leak detected ON
Normally ON, when leak detected OFF
Output mode
Open collector PNP
Open collector NPN
50 mA or less (resistive load)
Switching current
Control
30 Vdc
Output withstand voltage
output
1 V max. (at 50 mA switching current)
Residual voltage
Indicator
Normally green light ON, when leak detected orange light ON
Operating temperature
-10 to +55 °C (without freezing)
Storage temperature
-25 to +70 °C (without freezing)
Operating humidity
30 to 85 % RH (without condensation)
Dielectric strength
20 MΩ (at 500 Vdc)
Withstand voltage
1,000 Vac, 50/60 Hz for 1 min between all electrically live metal and case
Vibration resistance
10 to 55 Hz, 1.5 mm peak-to-peak amplitude, 2 h each in X, Y, and Z directions
Shock resistance
500 m/s
2024年5月18日发(作者：建友)
˾
Acids or alkaline liquids, IPA (isopropyl alcohol),
pure water, Fluorinert, Galden, etc.
˾
Body and cable are protected by PFA.
˾
Easy maintenance
*For explosion-proof applications, be sure to select a suitable
fiber type.
FEATURES
Easy maintenance
After leak detection, simply wipe the
detector surface—a much easier
process than with detection
tape or a liquid-absorbing model.
Acids or alkaline liquids, IPA
(isopropyl alcohol), pure water,
Fluorinert, Galden, etc.
Notes: For explosion-proof applications, be sure to select a suitable
fiber nert and Galden are registered trademarks of
3M and Solvay Solexis respectively.
Operation indicator
Switch status can be checked from
the body side.
Normal state (green LED lit)
Liquid leakage (red LED lit)
Body and cable are protected by PFA.
PVC brackets are available for acidic
or alkaline liquids. PFA (partially SUS) brackets
are available for organic solvents.
Suitable for export equipment
CE marking, UL certified.
Wide variety of output modes and types are available.
IP67
The cable exits the detect or through a
PFA tube fused to the case. Therefore,
leaking liquid cannot enter the detector.
•
NO/NC output
•
NPN/PNP output
DETECTION PRINCIPLE
Normal: no liquid
(light received)
Leak: liquid present
(dark)
Install this switch in the pan by stud or adhesive (for
PVC bracket type). Unlike the float type, switch does
not require a concave surface underneath.
Note: This switch is not explosion-proof. Do not use it where the use of an explosion-proof product is specified.
CATALOG LISTING
b
Body
Detection method & shapeBracket material
Operation modeOutput modeCatalog listing
Accessory
SpecificationsCatalog listing
Retroreflective
NC
PVC
NC
NO
NC
PFA
NC
NO
NC, NPN, PVC bracket type
NC, PNP, PVC bracket type
NO, NPN, PVC bracket type
NC, NPN, PFA bracket type
NC, PNP, PFA bracket type
NO, NPN, PFA bracket type
HPQ-D11
HPQ-D12
HPQ-D13
HPQ-D21
HPQ-D22
HPQ-D23
PVC bracket (10 units)
PFA(SUS) bracket (10 units)
HPQ-B01
HPQ-B02
Notes: For HPQ-D11/12/21 models, a switch with 5 m cable
(2 m PFA tube) is also available, specially produced
for the U.S. market (-L05).
Normally open type: no UL certification.
Some UL-certified models are available. For details,
contact Azbil Corporation.
Buy:|Phone844-385-3099|Email:*************************
SPECIFICATIONS
Catalog listing
HPQ-D11 / HPQ-D21HPQ-D12 / HPQ-D22
HPQ-D13 / HPQ-D23
Detection method
Retroreflective
Mounting surface
Polyvinyl chloride or stainless steel plate*
Standard target object
Water*
Light source
Infrared LED (peak emission wavelength 875 nm)
Supply voltage
10.8 to 26.4 Vdc (ripple voltage 10 % max.)
Current consumption
30 mA or less
Operation mode
Normally ON, when leak detected OFF
Normally OFF, when leak detected ON
Normally ON, when leak detected OFF
Output mode
Open collector PNP
Open collector NPN
50 mA or less (resistive load)
Switching current
Control
30 Vdc
Output withstand voltage
output
1 V max. (at 50 mA switching current)
Residual voltage
Indicator
Normally green light ON, when leak detected orange light ON
Operating temperature
-10 to +55 °C (without freezing)
Storage temperature
-25 to +70 °C (without freezing)
Operating humidity
30 to 85 % RH (without condensation)
Dielectric strength
20 MΩ (at 500 Vdc)
Withstand voltage
1,000 Vac, 50/60 Hz for 1 min between all electrically live metal and case
Vibration resistance
10 to 55 Hz, 1.5 mm peak-to-peak amplitude, 2 h each in X, Y, and Z directions
Shock resistance
500 m/s