2024年5月26日发(作者：钟离暄)

SmartSolar Charge Controllers

with interface

Ultra-fast Maximum Power Point Tracking (MPPT)

Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT

controller will improve energy harvest by up to 30 % compared to PWM charge controllers and by up to

10 % compared to slower MPPT controllers.

MPPT 150/70 up to MPPT 150/100

Advanced Maximum Power Point Detection in case of partial shading conditions

If partial shading occurs, two or more maximum power points (MPP) may be present on the power-

voltage curve.

Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP.

The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum

MPP.

Outstanding conversion efficiency

No cooling fan. Maximum efficiency exceeds 98 %.

SmartSolar Charge Controller

MPPT 150/100-Tr

with optional pluggable display

Flexible charge algorithm

Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary

switch (see manual for details).

Extensive electronic protection

Over-temperature protection and power derating when temperature is high.

PV short circuit and PV reverse polarity protection.

PV reverse current protection.

Bluetooth Smart built-in

The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.

Internal temperature sensor and optional external battery voltage, temperature and current sensing

via Bluetooth

A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate

battery voltage and temperature (and current, in case of a BMV-712 or a SmartShunt) to one or more

SmartSolar Charge Controllers.

SmartSolar Charge Controller

MPPT 150/100-Tr

without display

or

For a wired data connection to a Color Control GX, other GX products, PC or other devices

Fully discharged battery recovery function

Will initiate charging even if the battery has been discharged to zero volts.

Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.

: the multiple controller solution

Up to 25 units can be synchronised with , and up to 10 units with Bluetooth

Remote on-off

To connect for example to a BMS.

Bluetooth sensing:

Smart Battery Sense

Programmable relay

Can be programmed to trip on an alarm,

or other events.

Optional: SmartSolar pluggable LCD display

Simply remove the rubber seal that protects

the plug on the front of the controller,

and plug-in the display.

Bluetooth sensing:

BMV-712 Smart Battery Monitor

Bluetooth sensing: SmartShunt

SmartSolar pluggable display

Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands

E-mail: *********************** |

Battery voltage

Rated charge current

Nominal PV power, 12 V 1a,b)

Nominal PV power, 24 V 1a,b)

Nominal PV power, 36 V 1a,b)

Nominal PV power, 48 V 1a,b)

Max. PV short circuit current 2)

Maximum PV open circuit voltage

Maximum efficiency

Self-consumption

Charge voltage 'absorption'

Charge voltage 'float'

Charge voltage 'equalization'

Charge algorithm

Temperature compensation

Protection

Operating temperature

Humidity

Maximum altitude

Environmental condition

Pollution degree

Data communication

Remote on/off

Programmable relay

Parallel operation

Colour

PV terminals 3)

Battery terminals

Protection category

Weight

Dimensions (h x w x d) in mm

Safety

Data stored

Number of days trends data is

stored

12/24/48 V Auto Select (36 V: manual)

70 A 85 A 100 A

1000 W 1200 W 1450 W

2000 W 2400 W 2900 W

3000 W 3600 W 4350 W

4000 W 4900 W 5800 W

50 A (max 30 A per MC4 conn.) 70 A (max 30 A per MC4 conn.)

150 V absolute maximum coldest conditions

145 V start-up and operating maximum

98 %

Less than 35 mA @ 12 V / 20 mA @ 48 V

Default setting: 14,4 / 28,8 / 43,2 / 57,6 V

(adjustable with: rotary switch, display, or Bluetooth)

Default setting: 13,8 / 27,6 / 41,4 / 55,2 V

(adjustable: rotary switch, display, or Bluetooth)

Default setting: 16,2 V / 32,4 V / 48,6 V / 64,8 V (adjustable)

multi-stage adaptive (eight preprogrammed algorithms) or user defined algorithm

-16 mV / -32 mV / -64 mV / °C

PV reverse polarity / Output short circuit / Over temperature

-30 to +60 °C (full rated output up to 40 °C)

95 %, non-condensing

5000m (full rated output up to 2000m)

Indoor, unconditioned

PD3

, and Bluetooth

Yes (2 pole connector)

DPST AC rating: 240 VAC / 4 A DC rating: 4 A up to 35 VDC, 1 A up to 60 VDC

Yes, parallel synchronised operation with (max. 25 units) or Bluetooth (max. 10 units)

Blue (RAL 5012)

35 mm² / AWG2 (Tr models)

35 mm² / AWG2 (Tr models)

Two pairs of MC4 connectors

Three pairs of MC4 connectors (MC4 models)

(MC4 models)

35mm² / AWG2

IP43 (electronic components), IP22 (connection area)

3 kg 4,5kg

Tr models: 185 x 250 x 95 mm Tr models: 216 x 295 x 103

MC4 models: 215x 250 x 95 mm MC4 models: 246 x 295 x 103

EN/IEC 62109-1, UL 1741, CSA C22.2

Battery voltage,current and temperature, as well as load output current, PV voltage and PV current.

46

1a) If more PV power is connected, the controller will limit input power.

1b) The PV voltage must exceed Vbat + 5 V for the controller to start. Thereafter the minimum PV voltage is Vbat + 1 V.

2) A PV array with a higher short circuit current may damage the controller.

3) MC4 models: several splitter pairs may be needed to parallel the strings of solar panels

Maximum current per MC4 connector: 30 A (the MC4 connectors are parallel connected to one MPPT tracker)

With or Bluetooth up to 25 respectively up to 10 Charge Controllers can be daisy-chained for

synchronous charging and connected to a Color Control GX or other GX device.

Each Controller can be monitored individually, for example on a Color Control GX and on the VRM

website () or on a smartphone or iPad (Bluetooth)

Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands

E-mail: *********************** |

2024年5月26日发(作者：钟离暄)

SmartSolar Charge Controllers

with interface

Ultra-fast Maximum Power Point Tracking (MPPT)

Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT

controller will improve energy harvest by up to 30 % compared to PWM charge controllers and by up to

10 % compared to slower MPPT controllers.

MPPT 150/70 up to MPPT 150/100

Advanced Maximum Power Point Detection in case of partial shading conditions

If partial shading occurs, two or more maximum power points (MPP) may be present on the power-

voltage curve.

Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP.

The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum

MPP.

Outstanding conversion efficiency

No cooling fan. Maximum efficiency exceeds 98 %.

SmartSolar Charge Controller

MPPT 150/100-Tr

with optional pluggable display

Flexible charge algorithm

Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary

switch (see manual for details).

Extensive electronic protection

Over-temperature protection and power derating when temperature is high.

PV short circuit and PV reverse polarity protection.

PV reverse current protection.

Bluetooth Smart built-in

The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.

Internal temperature sensor and optional external battery voltage, temperature and current sensing

via Bluetooth

A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate

battery voltage and temperature (and current, in case of a BMV-712 or a SmartShunt) to one or more

SmartSolar Charge Controllers.

SmartSolar Charge Controller

MPPT 150/100-Tr

without display

or

For a wired data connection to a Color Control GX, other GX products, PC or other devices

Fully discharged battery recovery function

Will initiate charging even if the battery has been discharged to zero volts.

Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.

: the multiple controller solution

Up to 25 units can be synchronised with , and up to 10 units with Bluetooth

Remote on-off

To connect for example to a BMS.

Bluetooth sensing:

Smart Battery Sense

Programmable relay

Can be programmed to trip on an alarm,

or other events.

Optional: SmartSolar pluggable LCD display

Simply remove the rubber seal that protects

the plug on the front of the controller,

and plug-in the display.

Bluetooth sensing:

BMV-712 Smart Battery Monitor

Bluetooth sensing: SmartShunt

SmartSolar pluggable display

Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands

E-mail: *********************** |

Battery voltage

Rated charge current

Nominal PV power, 12 V 1a,b)

Nominal PV power, 24 V 1a,b)

Nominal PV power, 36 V 1a,b)

Nominal PV power, 48 V 1a,b)

Max. PV short circuit current 2)

Maximum PV open circuit voltage

Maximum efficiency

Self-consumption

Charge voltage 'absorption'

Charge voltage 'float'

Charge voltage 'equalization'

Charge algorithm

Temperature compensation

Protection

Operating temperature

Humidity

Maximum altitude

Environmental condition

Pollution degree

Data communication

Remote on/off

Programmable relay

Parallel operation

Colour

PV terminals 3)

Battery terminals

Protection category

Weight

Dimensions (h x w x d) in mm

Safety

Data stored

Number of days trends data is

stored

12/24/48 V Auto Select (36 V: manual)

70 A 85 A 100 A

1000 W 1200 W 1450 W

2000 W 2400 W 2900 W

3000 W 3600 W 4350 W

4000 W 4900 W 5800 W

50 A (max 30 A per MC4 conn.) 70 A (max 30 A per MC4 conn.)

150 V absolute maximum coldest conditions

145 V start-up and operating maximum

98 %

Less than 35 mA @ 12 V / 20 mA @ 48 V

Default setting: 14,4 / 28,8 / 43,2 / 57,6 V

(adjustable with: rotary switch, display, or Bluetooth)

Default setting: 13,8 / 27,6 / 41,4 / 55,2 V

(adjustable: rotary switch, display, or Bluetooth)

Default setting: 16,2 V / 32,4 V / 48,6 V / 64,8 V (adjustable)

multi-stage adaptive (eight preprogrammed algorithms) or user defined algorithm

-16 mV / -32 mV / -64 mV / °C

PV reverse polarity / Output short circuit / Over temperature

-30 to +60 °C (full rated output up to 40 °C)

95 %, non-condensing

5000m (full rated output up to 2000m)

Indoor, unconditioned

PD3

, and Bluetooth

Yes (2 pole connector)

DPST AC rating: 240 VAC / 4 A DC rating: 4 A up to 35 VDC, 1 A up to 60 VDC

Yes, parallel synchronised operation with (max. 25 units) or Bluetooth (max. 10 units)

Blue (RAL 5012)

35 mm² / AWG2 (Tr models)

35 mm² / AWG2 (Tr models)

Two pairs of MC4 connectors

Three pairs of MC4 connectors (MC4 models)

(MC4 models)

35mm² / AWG2

IP43 (electronic components), IP22 (connection area)

3 kg 4,5kg

Tr models: 185 x 250 x 95 mm Tr models: 216 x 295 x 103

MC4 models: 215x 250 x 95 mm MC4 models: 246 x 295 x 103

EN/IEC 62109-1, UL 1741, CSA C22.2

Battery voltage,current and temperature, as well as load output current, PV voltage and PV current.

46

1a) If more PV power is connected, the controller will limit input power.

1b) The PV voltage must exceed Vbat + 5 V for the controller to start. Thereafter the minimum PV voltage is Vbat + 1 V.

2) A PV array with a higher short circuit current may damage the controller.

3) MC4 models: several splitter pairs may be needed to parallel the strings of solar panels

Maximum current per MC4 connector: 30 A (the MC4 connectors are parallel connected to one MPPT tracker)

With or Bluetooth up to 25 respectively up to 10 Charge Controllers can be daisy-chained for

synchronous charging and connected to a Color Control GX or other GX device.

Each Controller can be monitored individually, for example on a Color Control GX and on the VRM

website () or on a smartphone or iPad (Bluetooth)

Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands

E-mail: *********************** |