2024年9月26日发(作者：夔蕊珠)
QuickSpecs
Overview
HP BladeSystem c7000 Enclosure
HP BladeSystem c7000 Enclosure - Front View
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
Device Bay 1
Device Bay 2
Device Bay 3
Device Bay 4
Device Bay 5
Device Bay 6
Device Bay 7
Device Bay 8
Device Bay 9
Device Bay 9
Device Bay 11
Device Bay 12
Device Bay 13
Device Bay 14
Device Bay 15
Device Bay 16
Power Supply Bay 1
Power Supply Bay 2
Power Supply Bay 3
Power Supply Bay 4
Power Supply Bay 5
Power Supply Bay 6
Insight Display
HP BladeSystem c7000 Enclosure - Rear View
1.
2.
3.
4.
Active Cool 200 Fans & fan bays
Interconnect Bays
BladeSystem Onboard Administrator
Power Inputs (single phase model shown)
What's New
Support for Ethernet and FC SAN interconnects
HP 2400W Platinum Efficiency Power Supply Opt
HP 6X 2400W Platinum Efficiency FIO Power Supply
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 1
QuickSpecs
Overview
HP BladeSystem c7000 Enclosure
At A Glance
This document covers the HP BladeSystem c7000 Enclosure. For more information on HP ProLiant Server Blades and HP
BladeSystem c-Class Interconnect Components please see the following QuickSpecs:
HP BladeSystem c-Class Server Blades:
/products/quickspecs/division/
HP BladeSystem c-Class Interconnect QuickSpecs:
/products/quickspecs/12524_div/12524_
HP BladeSystem c3000 Enclosure QuickSpecs:
/products/quickspecs/12790_div/12790_
HP BladeSystem solutions start with a BladeSystem c7000 Enclosure, optional c7000 hot-plug power supplies, HP Active
Cool Fans, and an optional redundant BladeSystem Onboard Administrator module. Once the enclosure has been selected,
the following components can be added: networking interconnect modules, HP ProLiant and Integrity Server Blades, and
Insight Control management software. Reference the QuickSpecs listed above.
Warranty - This product is covered by a global limited warranty and supported by HP Services and a worldwide
network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for three years from
date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Additional
support may be covered under the warranty or available for an additional fee. Enhancements to warranty services are
available through HP Care Pack services or customized service agreements.
Enclosure: Three-year parts and labor, on-site limited global warranty. Certain restrictions and exclusions apply
Enclosure options: Fans, Power Supplies, BladeSystem Onboard Administrator, 1 Year parts only or enclosure
warranty
HP BladeSystem Interconnects: 1 Year parts and labor, on-site regardless of the warranty period for the system
in which they are installed
HP Storage Fibre Channel switches have a maximum warranty period of one (1) year regardless of the warranty
period for the system in which they are installed
Hard drives have either a one year or three year warranty; refer to specific hard drive QuickSpecs for details.
For additional information please visit: /go/bladesystem
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 2
QuickSpecs
HP BladeSystem c-Class Overview
HP BladeSystem c7000 Enclosure
HP BladeSystem c-A BladeSystem c7000 enclosure holds up to 16 server and/or storage blades plus redundant
Class c7000 Enclosurenetwork and storage switches. It includes a shared, multi-terabit high-speed mid-plane for wire-
once connectivity of server blades to network and shared storage. Power is delivered through a
pooled power backplane that ensures the full capacity of the redundant hot-plug power supplies is
available to all blades.
Each c7000 enclosure is built with the following functions:
Up to 16 half-height and/or up to 8 full-height server blades and/or storage blades per
enclosure.
Up to 4 different interconnect fabrics (Ethernet, FC, IB, iSCSI, SAS, etc.) supported
simultaneously within the enclosure.
Choice of a single-phase, three-phase or a -48V DC power subsystem for flexibility in
connecting to datacenter power.
HP Thermal Logic technology for lower power consumption and airflow.
Four (4) or Ten (10) Active Cool 200 fans as standard. For redundancy and improved power
consumption and acoustics; additional Active Cool 200 Fan kits can be added for a
maximum of 10 fans.
Redundant hot-plug cooling, redundant hot-plug power supplies, redundant connections,
redundant interconnect modules, optional redundant BladeSystem Onboard Administrator
management modules.
Lowest cost of ownership.
Full AC redundancy - with no power zones.
An BladeSystem Onboard Administrator management module is built in to the enclosure with the
following functions:
Robust, multiple enclosure setup and control.
Reports asset and inventory information for the devices in the enclosure.
Reports thermal and power information, including real-time actual power usage per server
and per enclosure.
Front-mounted Insight Display for easy management within the datacenter.
Integrated access to all server blade iLOs from a single cable.
Provides integrated access to interconnect bay device management ports from the single
BladeSystem Onboard Administrator cable.
Single sign-on capability for all devices in the enclosure
Role-based security locally and/or with LDAP directory services.
Provides a wizard-based initial setup process for easy configuration.
A BladeSystem c7000 enclosure provides the following benefits:
With local and remote hardware management integrated across the solution, one full
enclosure can be managed as easily as one server.
Scalable: Management and network interconnects extend scalability beyond a single
enclosure, allowing resources to be pooled and shared across multiple enclosures.
Investment protection: Accommodates multiple server and network designs in one
enclosure.
Lower costs per server, in comparison to rack-mounted servers
Lower power consumption, in comparison to rack-mounted servers.
Lower airflow requirements, in comparison to rack-mounted servers
HP c3000 EnclosureFor customers that need a smaller system the c3000 is the perfect solution. Supporting up to 8
blades and 4 interconnects the c3000 enclosure provides and ideal solution for Small and Medium
businesses and remote sites for more information refer to the c3000 QuickSpecs at:
/products/quickspecs/12790_div/12790_
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 3
QuickSpecs
HP BladeSystem c-Class Overview
HP BladeSystem c7000 Enclosure
HP ProLiant & IntegrityDelivering best-in-class performance, choice and reliability on AMD Opteron™, Intel® Xeon® and
Server BladesIntel® Itanium 2® processors for Windows, Linux, Solaris, or HP-UX based servers; the HP
portfolio of server blades supports a variety of application requirements for scale-out
architectures. HP offers one-, two-, and four-processor server blades, with the widest range of
performance, and form factors.
For more information please see:
/products/quickspecs/division/
HP SB40c Storage
Blade
Direct attached storage
The StorageWorks SB40c Storage Blade delivers direct attached storage for c-Class servers, with
support for up to six hot plug small form factor (SFF) SAS or SATA hard disk drives. The
enclosure backplane provides a PCI Express connection to the adjacent c-Class server blade and
enables high performance storage access without any additional cables. The SB40c Storage
Blade features an onboard Smart Array P400 controller with 256 MB battery-backed write cache,
for increased performance and data protection.
Shared storage
Use HP LeftHand P4000 Virtual SAN Appliance (VSA) software to turn the SB40c into an iSCSI
SAN for use by all severs in the enclosure and any server on the network. HP LeftHand VSA
software is installed in a virtual machine on a VMware ESX host server adjacent to the SB40c. HP
LeftHand P4000 VSA turns the SB40c into a scalable and robust iSCSI SAN, featuring, storage
clustering for scalability, Network RAID for storage failover, thin provisioning, snapshots, remote
replication, and cloning. Expand capacity within the same enclosure or to other BladeSystem
enclosures by adding additional SB40c Storage Blades and HP LeftHand VSA licenses.
/products/quickspecs/12587_div/12587_
HP Ultrium Tape
Blades
The HP StorageWorks SB1760c is an LTO-4 Ultrium, 1.6 TB capacity on a single cartridge (2:1
compression), 576 GB/hr performance (2:1 compression), 128 MB buffer size, WORM capability,
AES 256-bit hardware data encryption capability.
The HP StorageWorks SB920c Tape Blade is an LTO-3 Ultrium tape blade that provides up to
800GB of capacity on a single data cartridge (2:1 compression) and performance up to 432GB/hr
(2:1 compression).
The Ultrium 448c Tape Blade is an LTO-2 Ultrium tape blade the provides up to 400GB of
capacity on a single data cartridge (2:1 compression) and performance up to 173GB/hr (2:1
compression).
Tape blades are ideal for HP BladeSystem c-Class customers who need a data protection solution
but are not connected into a Storage Area Network (SAN). They provide direct attach data
protection for the adjacent server and network backup protection for all other data within the
enclosure. The HP StorageWorks tape blades are the industry's first bladed tape drives and are
developed exclusively for the BladeSystem c-Class enclosures.
For more information, please visit:
/products/quickspecs/12729_div/12729_
HP StorageWorks
Network Storage
Servers
HP StorageWorks X1800sb Network Storage Blade
HP StorageWorks X1800sb Network Storage Blade is a flexible storage server solution for
BladeSystem environments. Combine the X1800sb with the SB40c Storage Blade to enable file
serving and iSCSI shared storage inside the BladeSystem enclosure. The flexibility of the
X1800sb extends to external storage as well. The X1800sb can also be used as a low cost SAN
gateway to provide consolidated file-serving access to FC, SAS, or iSCSI SANs.
NOTE: See the QuickSpecs for Technical Specifications and additional information:
/products/quickspecs/12786_div/12786_
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 4
QuickSpecs
HP BladeSystem c-Class Overview
HP BladeSystem c7000 Enclosure
HP StorageWorks X3800sb Network Storage Gateway
The X3800sb Network Storage Gateway Blade is used to access FC, SAS, or iSCSI SAN storage,
translating file data from the server into blocks for storage to provide consolidated file, print, and
management hosting services in a cluster-able package.
Built on the HP ProLiant BL460c Server Blade, the HP StorageWorks X3800sb Network Storage
Gateway Blade is a ready to deploy SAN gateway solution, with Microsoft Storage Server 2008,
Enterprise x64 Edition pre-installed. The HP Rapid Start-up Wizard accelerates new deployments
by walking you through basic system settings step-by-step. The X3800sb also includes a Microsoft
Cluster Server (MSCS) license and Microsoft iSCSI Software Target.
NOTE: See the QuickSpecs for Technical Specifications and additional information:
/products/quickspecs/13334_div/13334_
Dynamic Power
Capping
HP Dynamic Power Capping is the industry's first and only power capping solution that lets you
reclaim trapped power and cooling capacity without putting electrical infrastructure or server
performance at risk. The enclosure Dynamic Power Cap will be shared amongst all of the installed
devices and individual server caps will be changed to match the server load. This will optimize the
performance of the servers while ensuring that the enclosure stays below the cap value.
Rack Airflow
Requirements
Rack 10000 G2 series cabinets
The increasing power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. The G2 10000 Series Racks provide enhanced airflow for
maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.
NOTE: For operation with the DC Input Module the G2 1000 Series Rack Extension is required to
allow DC Power Cabling to be installed.
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure
adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear doors, you
must allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to
permit adequate airflow (equivalent to the required 64 percent open area for ventilation).
The clearance from face of rack to inside of the front door needs to be 1.75" minimum.
Side: The clearance between the installed rack component and the side panels of the rack
must be a minimum of 2.75 inches (7 cm).
Depth: Minimum 39.4 inches (1000mm) for AC power, 47 inches (1200mm) for DC Power
Input
Adjustable rack rails are shipped with each enclosure:
Minimum rail length: 25 inches (635mm)
Maximum rail length: 34 inches (864mm)
CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack.
This arrangement ensures proper airflow. Using a rack without blanking panels results in improper
cooling that can lead to thermal damage.
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 5
QuickSpecs
HP BladeSystem c-Class Overview
Factory Express
Portfolio for Servers
and Storage
HP BladeSystem c7000 Enclosure
HP Factory Express offers configuration, customization, integration and deployment services for
HP servers and storage products. Customers can choose how their factory solutions are built,
tested, integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading,
asset tagging and custom packaging. HP products supported through Factory Express include: a
wide array of servers and storage: HP Integrity, HP ProLiant & HP ProLiant & Integrity Server
Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable
tape libraries and configurable network switches.
For more information on Factory Express services for your specific server model please contact
your sales representative or go to: /go/factory-express
HP Enterprise
Configurator
The HP eConfigure Enterprise Configurator now provides factory default racking for our HP
hardware portfolio. This approach is aligned with our strategic direction to meet the needs and
expectations of our valued customers. If you require "custom" rack configuration, please contact
HP's Customer Business Center or an Authorized Partner for assistance.
/products/configurator
HP InsightHP Insight Foundation
management software
Managing the growing number of servers can be complex and
expensive for your organization. IT managers need to address changing
business needs with tools that meet the challenges of managing today's
complex Datacenters.
HP provides management solutions that are designed to simplify a
server's installation, configuration and maintenance throughout the
entire server lifecycle. This provides the customer with higher levels of
operational efficiency and highly reliable systems:
/go/foundation.
The foundation pack includes:
HP SmartStart
HP Management
HP ProLiant Firmware Maintenance
SmartStart version supported (minimum): SmartStart 7.60.
/servers/smartstart
HP Integrated Lights-OutHP Integrated Lights-Out (iLO) simplifies server setup, health
(iLO)monitoring, power and thermal control, and lights-out remote
administration of ProLiant ML, DL, and BL servers. HP iLO functions
without additional software and can be accessed from any location via a
web browser. HP iLO works hand-in-hand with HP Systems Insight
Manager, Insight Control and Insight Dynamics for ProLiant, helping
customers unleash the value of the ProLiant platform and deliver the
highest possible quality of IT service. For more information, visit:
/go/iLO
HP Insight ControlHP Insight Control, a product option, delivers essential infrastructure
management that can help save time and money by making it easy to
deploy, monitor, remote control, and optimize your IT infrastructure
through a single, simple management console.
Two versions of Insight Control are available, to serve environments
requiring either a Linux-based or a Windows-based central management
servers: HP Insight Control for Linux, and HP Insight Control. See
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 6
QuickSpecs
HP BladeSystem c-Class Overview
HP BladeSystem c7000 Enclosure
/go/insightcontrol
HP Insight Control includes one year of 24 x 7 HP Software Technical
Support and Update Service ensuring rapid access to HP support staff
and proactive delivery of software updates. For more information about
this service, please visit: /services/insight.
HP Insight Dynamics forHP Insight Dynamics for ProLiant, a product option, is an integrated
ProLiantcommand center that enables IT Staff personnel to continuously analyze
and optimize a converged infrastructure, while automating and reducing
the cost of common data center tasks by as much as 40 percent. As a
powerfully integrated by design toolkit to accelerate complex technology
projects and simplify daily operations that ultimately enable IT Staff
personnel to dynamically keep pace with the organizations changing
business requirements. It enables them to plan capacity and power
continuously, balance across physical and virtual resources, and ensure
cost-effective high availability. It also enables IT organizations to
provision infrastructure consistently and automatically from pools of
shared resources using a self-service portal. Resources provisioned can
range from a single virtual machine to complex multi-tier environments
and their associated physical and virtual resource requirements. In
addition to the previous functional benefits, it also provides a cost-
effective disaster recovery for physical and virtual environments that
works with HP StorageWorks Continuous Access software for both the
Enterprise Virtual Array and the XP storage array allowing application
environments to be reactivated in minutes with the touch of a button to a
remote location.
NOTE: For more information, visit:
/go/insightdynamics
HP BladeSystem PowerThe HP BladeSystem Power Sizer helps in sizing the power infrastructure needed for a HP
SizerBladeSystem solution. This sizer enables effective planning for the power consumption and heat
load of the BladeSystem at its site.
The sizer enables you to:
Select the type and number of components within each Blade Server and Blade Enclosure.
View the effect of component changes on the power consumption and heat loading.
Review server loading and determine power supply and power subsystem requirements.
Approximate electrical and heat load for facilities planning purposes.
The sizing estimate is based on component level power measurements for a system operating at
very high enterprise application loads.
Values obtained from the BladeSystem Power Sizer are estimates for planning purposes only.
Actual measured power consumption can be significantly lower or higher than the Power Sizer
estimates. Actual power consumption varies with application type, application utilization, and
ambient temperature.
The p-class BladeSystem and the c-Class BladeSystem solutions are supported in the
BladeSystem Power Sizer.
Available at: /go/bladesystem/powercalculator
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 7
QuickSpecs
HP BladeSystem c-Class Overview
HP Power Advisor
HP BladeSystem c7000 Enclosure
The HP Power Advisor is a tool provided by Hewlett-Packard to assist in the estimation of power
consumption and proper selection of components including power supplies at a system, rack, and
multi-rack level. A variety of additional features are also provided including a condensed bill of
materials, a cost of owner ship calculator, and a power report. The HP Power Advisor allows for
the mixing of rack, tower, blade, and other products in a single environment.
Available at: /go/hppoweradvisor
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 8
QuickSpecs
Service and Support
Service and Support
HP BladeSystem c7000 Enclosure
HP Care Pack Services: Packaged server and storage services for increased uptime,
productivity and ROI
When you buy HP server and storage products and solutions, it's also a good time to think about
what levels of support you may need. Our portfolio of service options reduce deployment and
management worries while helping you get the most out of your server and storage investments.
We take a holistic approach to your environment, bridging servers, blades, storage, software and
network infrastructures with our packaged HP Care Pack Services for servers and storage.
Protect your business beyond warranty
When it comes to robustness and reliability, standard computing equipment warranties have
matured along with technology. Good news that can also create problems stemming from
depending on standard warranties designed to only protect against product defects and some
downtime causes. Using a standard approach to warranty uplifts, such as HP Care Pack Services,
helps reduce downtime risks and provides operational consistency for mission-critical and
standard business computing.
HP Care Pack Services: Upgrading or extending standard server and storage warranties
cost effectively
HP Care Pack Services offer a standard reactive hardware and software support services suite
sold separately, or combined with our Support Plus and Support Plus 24 services. The portfolio
also provides a combination of integrated proactive and reactive services, such as Proactive 24
Service and Critical Service. In addition with HP Proactive Select, you can acquire the specific
proactive constancy and technical services. HP Proactive Select menu offers a broad set of
service options that you can mix and match depending on your specific requirements. Proactive
service options include offers for server, storage, network, SAN device, software, environment
and education services.
HP server and storage lifecycle support services offers a full spectrum of customer care-from
technology support to complex migrations to complete managed services. HP Factory Express
provides customization, integration and deployment services for turnkey solutions. HP Education
Services offer flexible, comprehensive training on to help your IT staff get the most out of your
server and storage investments. HP Financial solutions extend innovative financing and cost-
effective asset management programs-from purchase to equipment retirement.
Learn more: /services/servers and /services/storage
NOTE: Care Pack Services availability may vary by product and country.
HP Care Pack Services are sold by HP and HP Authorized Service Partners:
Services for customers purchasing from HP or an enterprise reseller are quoted using HP
order configuration tools.
Customers purchasing from a commercial reseller can find HP Care Pack Services at
/go/lookuptool
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 9
QuickSpecs
Service and Support
HP BladeSystem c7000 Enclosure
Recommended HP Care Pack Services for optimal satisfaction with your HP
product
Recommended
Services
3-Year HP Support Plus 24
For a higher return on your server and storage technology, our 3-year combined reactive support
service delivers integrated onsite hardware/software support services available 24x7x365,
including access to HP technical resources, 4-hour response onsite hardware support and
software updates.
Improve uptime with responsive hardware and software services
Enjoy consistent service coverage across geographically dispersed sites
Update HP software at a predictable cost
Increase customer satisfaction-with no interoperability gaps
/V2//5981-6638EEE
3-Year HP Hardware Support Onsite Call-to-Repair (CTR) Service, 6- or 24-hour
Provides your IT manager with a team of support specialists who will quickly begin troubleshooting
the system to help return the hardware to operating condition within 6 or 24 hours of the initial
service request to the HP Global Solution Center.
HP is committed to repairing your hardware within a maximum of six or twenty four hours. The
benefits include:
Improved system uptime
Predictable repair times
More effective IT resource planning
Consistent level of hardware support across your multi-technology systems
/V2//5981-6636ENN
HP BladeSystem c7000 Infrastructure (ICE + OS) Installation & Startup
Provides for the installation and startup including hardware and software, including deployment of
OS, HP SIM, RDP, RDP, PMP and VPM.
Efficient and effective HP BladeSystem c-Class infrastructure setup, server deployment,
and management
Delivery of the service at a mutually scheduled time convenient to your organization
Expedited installation, provided all service prerequisites are met prior to commencement of
service
Verification prior to installation that all service prerequisites are met
Reduced implementation time and cost
More effective IT resource planning
Increased data-center efficiency through reduction of manually intensive tasks
Allows IT resources to stay focused on their core tasks and priorities
Helps improve IT infrastructure uptime
Automated diagnosis and remote support for hardware problems (via HP Service Essentials
Remote Support Pack)
/V2//4AA0-5964ENW
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 10
QuickSpecs
Service and Support
Optional Services
HP BladeSystem c7000 Enclosure
Optional HP Care Pack Services that will enhance your HP product experience
HP Enhanced Network Installation & Startup for BladeSystem Switches
Provides for the configuration and testing of BladeSystem Ethernet interconnect switches to
facilitate proper implementation of network protocols and access to advanced features.
/V2//4aa0-5969ENW
3-Year HP Proactive 24
As an alternative to our recommended support level, for customers who want enhanced
operational effectiveness and proactive problem identification:
Provides improved stability, availability and operational effectiveness with an integrated hardware
and software support service that combines industry-leading reactive technical assistance with
proactive account services, giving your IT manage support from a team of service specialists.
/V2//4AA0-1614ENUC
HP Proactive Select Service
Customer needs on demand access to consulting, technical proactive services and education
courses
Provides a flexible way to purchase HP best-in-class consultancy and technical services. You can
buy Proactive Select Service Credits when you purchase your hardware and then use the credits
over the next 12 months.
/V2//4AA2-3842ENN
eSupportHP eSupport is a portfolio of technology-based services that assist you with managing your
business environment - from the desktop to the data center.
Support Portal
The HP support portal provides one-stop access to the information, tools and services you need
to manage the daily operations of your IT environment.
Features include:
Access to self-solve tools (including search technical knowledge base)
Efficient logging and tracking of support cases
Collaboration with other business and IT professionals
Download of patches and drivers
Access to diagnostic tools
Proactive notification of relevant information
Access to certain features of the support portal requires an HP service agreement. To access the
support portal, visit: /support
HP Insight Remote Support software delivers secure remote support for your HP Servers and
Storage, 24 X 7, so you can spend less time solving problems and more time focused on your
business. You can have your systems remotely monitored for hardware failure using secure
technology that's been proven at thousands of companies around the world. In many cases, you
can avoid problems before they occur.
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 11
QuickSpecs
Service and Support
Customer Technical
Training
HP BladeSystem c7000 Enclosure
In today's cost-conscious business environment, IT professionals, developers, consultants and
users face an interesting challenge: how to keep up with the latest technologies and expand
important skills while delivering profitable results on current projects. To help address this
challenge, HP offers innovative training solutions that help keep you up-to-date on virtualization,
server, storage, Insight Control, Citrix, Microsoft® and open source/Linux-related topics-while
spending less time away from business-critical activities.
HP Services AwardsHP Technology Services continues to be recognized for service and support excellence by
customers, partners, industry organizations and publications around the world. Recent honors and
award reflect our services team's dedications, technical expertise, professionalism and
uncompromising commitment to customer satisfaction.
Additional Services
Information
To learn more on HP ProLiant servers, HP BladeSystem servers and HP StorageWorks storage
products, please contact your HP sales representative or HP Authorized Channel Partner. Or visit:
/services/proliant or /services/bladesystem or
/hps/storage or /services/servers
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 12
QuickSpecs
Configuration Information Factory Integrated Models
For a complete configuration of the HP BladeSystem, please do the following:
HP BladeSystem c7000 Enclosure
Step 1: Select desired model, configuration and quantity of HP ProLiant server and
Storage blades
NOTE: For server blade information, please visit:
/products/quickspecs/division/
NOTE: For Storage Blade information, please visit:
/products/quickspecs/12587_div/12587_
Step 2: Determine quantity of HP BladeSystem c-Class Enclosures to purchase
and choose Required Options (One of the following from each list unless
otherwise noted):
NOTE: Each HP BladeSystem c-Class Server Blade Enclosure holds up to 16 half-height blades. Server blanks will be
shipped in all empty bays.
Base Server Blade Enclosure Configuration
HP BladeSystem
BLc7000 c-Class
Server Blade
Enclosures
HP BLc7000 CTO Enclosure
HP BLc7000 BCS CTO c-Class Enclosure
NOTE: CTO models include 1x BladeSystem Onboard Administrator with KVM,
4x Active Cool 200 Fans and 0x power supplies.
NOTE: All c-Class enclosures support HP ProLiant, Integrity and StorageWorks
blades in either mixed or homogenous configurations. The AD361C enclosure is
suggested for configurations primarily used with Integrity blades.
507019-B21
AD361C
Required Options (one of the following from each category unless otherwise
noted)
HP Power Suppliesc-Class Power Modules (1 per enclosure)
HP BLc7000 Single Phase Power Module, FIO
HP BLc7000 Three Phase Power Module, FIO, INT'L
HP BLc7000 Three Phase Power Module, FIO, NA/JPN
HP BLc7000 -48V DC Power Input Module
c-Class Power Supply (Up to 6)
HP 6X 2400W Platinum Efficiency FIO Power Supply
NOTE: The bundle includes a quantity of 6 HP 2400W High Efficiency PSU so a
full enclosure can be configured with a single part number.
NOTE: HP BladeSytem Power supplies meet multiple Energy Efficiency
Initiatives: 2400W, 94%: Climate Savers Computing Initiative PLATINUM and
ECOS Consulting 80 Plus PLATINUM.
HP 2400W Platinum Hot-Plug Power Supply (Single PSU supplied with 2m/6ft
IEC C20 - C19 jumper cord)
NOTE: HP BladeSytem Power supplies meet multiple Energy Efficiency
Initiatives: 2400W, 92%: Climate Savers Computing Initiative PLATINUM and
ECOS Consulting 80 Plus PLATINUM.
6x HP 2400W High Efficiency Hot-Plug Power Supply Bundle, FIO
NOTE: The bundle includes a quantity of 6 HP 2400W High Efficiency PSU so a
full enclosure can be configured with a single part number.
HP 2400W High Efficiency Hot-Plug Power Supply (Single PSU supplied with
2m/6ft IEC C20 - C19 jumper cord)
HP c7000 Enclosure 2250W Hot-Plug -48V DC Power Supply (single PSU)
NOTE: Only compatible with -48V DC Power Input Module.
413379-B21
413381-B21
413380-B21
AH331A
517521-B22
588603-B21
517521-B21
499243-B21
AH332A
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 13
QuickSpecs
Configuration Information Factory Integrated Models
HP BladeSystem c7000 Enclosure
HP Cooling Options
NOTE: Mixing of power supplies in the same enclosure is not supported. All
power supplies must be of the same type. All HP 2400W HE, all HP2250W or all
-48V DC.
NOTE: If Three Phase Power Module selected, a minimum of 3 Power Supply
Option Kits are needed. For full redundancy 6 Power Supply Option Kits are
required.
c-Class Active Cool Fan (Up to 6)
6x HP Active Cool 200 Fan Bundle, FIO
NOTE: The bundle includes a quantity of 6 HP Active Cool 200 Fans so a full
enclosure can be configured with a single part number.
HP Active Cool 200 Fan Option Kit (single fan)
NOTE: A minimum of 4 Active Cool 200 Fans is required, 8 Active Cool 200
Fans can support a full blade enclosure, 10 Active Cool 200 Fans should be
ordered for reduced power consumption and noise reduction.
NOTE: Single-Phase models may require additional power supplies. Fans should
be added to provide redundancy, reduce power consumption and reduce noise.
NOTE: Three-Phase models require a minimum of 6 Active Cool 200 Fans.
NOTE: Some Blade configurations require 10 fans.
517520-B21
412140-B21
Step 3: Select optional software bundle (if nothing is selected system will ship with
16 Insight Control and Insight Control for Linux Trial Licenses):
HP Insight SoftwareEnclosure Options
HP c-Class Insight Control for BladeSystem 16 Licenses, including 1 year of
24x7 Technical Support and Updates, FIO
HP c-Class Insight Control for BladeSystem 8 Licenses, including 1 year of 24x7
Technical Support and Updates, FIO
417688-B23
439034-B23
Step 4: Select optional Redundant BladeSystem Onboard Administrator Capability
HP c-Class Enclosure
Options
HP c7000 Onboard Administrator with KVM Option
NOTE: With 1 Gb/s Adapters.
NOTE: The HP c7000 OA supports the mixing with the HP c7000 OA with KVM.
The HP c7000 OA with KVM must be the active OA to provide the Enclosure
KVM feature. The KVM menu has an OA CLI button at the bottom, which allows
an OA administrator to log into the OA and be able to force a takeover so the OA
with KVM will become the standby OA. The OA Firmware Sync feature cannot
be used to update mismatched OA modules. Mismatched OA firmware versions
between the original c7000 OA and c7000 OA with KVM require the
administrator to use the GUI or CLI to update the OA from a file (http, ftp, tftp,
local client file using the GUI or USB key containing the OA firmware file).
NOTE: Models of the c7000 enclosure (part numbers 507019-B21 and AD361C)
come with a BladeSystem Onboard Administrator with KVM as standard. Order
this part number (456204-B21) when a second redundant BladeSystem Onboard
Administrator is desired for a c7000 enclosure.
456204-B21
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 14
QuickSpecs
Configuration Information Factory Integrated Models
HP BladeSystem c7000 Enclosure
Step 5: Select 1 or more interconnect modules for each enclosure
The following is a list of various HP BladeSystem c-Class interconnect modules (Virtual Connect, Ethernet, Fibre Channel,
InfiniBand, and SAS interconnects). For detailed interconnect options consult the specific interconnect QuickSpecs:
/products/blades/components/
A pair of interconnects must be ordered if redundancy is required.
NOTE: Options for specific c-Class interconnects are NOT included in the list below. Consult the individual interconnect
QuickSpecs to obtain part numbers for interconnect options such as cables, SFPs, etc.
HP BladeSystem
c-Class Network
Interconnects
HP Virtual Connect Flex-10 10Gb Ethernet Module for the c-Class BladeSystem
HP Virtual Connect Flex-10 10Gb Enterprise Edition for BladeSystem c7000
NOTE: Includes two HP Virtual Connect Flex-10 10Gb Ethernet modules plus
one BL-c7000 enclosure license for HP Virtual Connect Enterprise Manager
software. The license entitlement certificate must be redeemed online or via fax
to obtain the VCEM license activation key.
HP 1/10Gb-F Virtual Connect Ethernet Module for c-Class BladeSystem
HP ProCurve 6120G/XG Blade Switch
HP ProCurve 6120XG Blade Switch
Ethernet Pass-Through Module for HP BladeSystem
455880-B21
591973-B21
447047-B21
498358-B21
516733-B21
406740-B21
538113-B21
451439-B21
451438-B21
410916-B21
438030-B21
438031-B21
HP 10GbE Pass-Thru Module
Cisco Catalyst Blade Switch 3120X for HP
Cisco Catalyst Blade Switch 3120G for HP
Cisco Catalyst Blade Switch 3020 for HP c-Class BladeSystem
GbE2c Layer 2/3 Ethernet Blade Switch for c-Class BladeSystem
HP 1:10 Gb Ethernet BL-c Switch
NOTE: The HP BladeSystem c-Class Network Interconnects ship as single units.
The above interconnects must be ordered in quantities of two for redundancy
support.
HP BladeSystemHP Virtual Connect 8Gb 24-Port Fibre Channel Module for c-Class BladeSystem
c-Class SAN
HP Virtual Connect 8Gb 20-Port Fibre Channel Module for c-Class BladeSystem
Interconnects
16 port FC Pass-thru Module for c-Class BladeSystem
Brocade 8/12c SAN Switch for HP BladeSystem c-Class, Full Fabric
Brocade 8/24c SAN Switch for HP BladeSystem c-Class, Full Fabric
Brocade 8/24c SAN Switch Power Pack for HP BladeSystem c-Class, Full Fabric
Brocade 8/12c SAN Switch 12-port Upgrade LTU
Cisco MDS 9124eCisco MDS 9124e 12-port Fabric Switch
Fabric Switch for HP c-
Cisco MDS 9124e 24-port Fabric Switch
Class BladeSystem
Cisco MDS 9124e 12-port Upgrade LTU
HP StorageWorks SASHP StorageWorks 3Gb SAS BL Switch - Single Pack
Switch
HP StorageWorks 3Gb SAS BL Switch - Dual Pack
HP BladeSystemQLogic BLc 4X QDR IB Switch for HP BladeSystem c-Class
InfiniBand
QLogic BLc 4X QDR IB Management Module
Interconnects
HP BLc 4X QDR IB Switch Module for HP c-Class BladeSystem
NOTE: Quad Data Rate (QDR) InfiniBand Switch Modules are only supported in
the RoHS 6 of 6 compliant enclosures (part numbers starting with 507) and G6
Blades.
466482-B21
572018-B21
403626-B21
AJ820A
AJ821A
AJ822A
T5517A
AG641A
AG642A
T5169A
AJ864A
AJ865A
505958-B21
505959-B21
489184-B21
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 15
QuickSpecs
Configuration Information Factory Integrated Models
NOTE: A pair of PDUs must be ordered for AC Feed redundancy.
HP BladeSystem c7000 Enclosure
Step 6: Select rack power distribution for single-phase models
HP Power DistributionHP Monitored Power Distribution Unit
Units
HP 17.3 kVA S348 Monitored PDU- single input, 3Ø, 48A (NA/JPN)
HP 14.4 kVA S340 Monitored PDU - single input 3Ø, 40A (NA/JPN)
HP 22 kVA S332 Monitored PDU- single input, 3-phase, 32A (INTL)
HP Modular Power Distribution Units
HP 17.3 kVA Modular PDU, 48A 3Ø, Core Only (NA/JPN)
HP 14.4 kVA Modular PDU, 40A 3Ø, Core Only (NA/JPN)
HP 22 kVA Modular PDU, 32A 3Ø, Core Only (Intl)
HP 8.6 kVA Modular PDU 24A 3Ø Core Only (NA/JPN)
HP 11 kVA Modular PDU 16A 3Ø Core Only (Intl)
HP 8,3k VA Modular PDU 40 Amp Core Only (NA/JPN)
HP 9.2kVA Modular PDU 40 Amp Core Only (Intl)
HP7.3kVA Modular PDU 32 Amp Core Only (Intl)
HP 4.9kVA Modular PDU 24 Amp Core Only (NA/JPN)
NOTE: The Core Only Modular Power Distribution Unit Kits excludes the
extension bars as they are not required with the HP BladeSystem
HP Two C-13 PDU Extension Bars
NOTE: Each extension bar has a C19 input and 7 C13 receptacles. The option is
ideal for model S348, and, model S332, which both have only C19 outlets (12)
and for all Core Only Modular PDUs.
AF916A
AF536A
AF917A
AF511A
AF519A
AF518A
AF512A
AF513A
252663-D75
252663-B34
252663-B33
252663-D74
AF500A
Step 7: Select optional Power Cords for Single Phase Model (country specific
power cords are listed under options)
NOTE: Default power cord is a 6ft IEC C19 - C20 cord
HP Power DistributionHP 16A IEC320-C19 to C20 1.2m/4ft PDU cord, Grey
Units Power cords
HP 16A IEC320-C19 to C20 2m /6ft PDU cord, Grey
(HP C19 to C20)
HP 16A IEC320-C19 to C20 2.5m/8ft PDU cord, Black
HP 16A IEC320-C19 to C20 4.5m/15ft PDU cord, Black
AF575A
AF574A
295633-B22
E7804A
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 16
QuickSpecs
Related Options
HP BladeSystem
c-Class Server Blade
Enclosures
HP BladeSystem c7000 Enclosure
HP BladeSystem c7000 Enclosure, Single-Phase with 6 Power Supplies, 10
Fans with 16 HP Insight Control Licenses
HP BladeSystem c7000 Enclosure, Three-Phase North America/Japan with 6
Power Supplies, 10 Fans with 16 HP Insight Control Licenses
HP BladeSystem c7000 Enclosure, Three-Phase International with 6 Power
Supplies, 10 Fans with 16HP Insight Control Licenses
HP BladeSystem c7000 Enclosure, Single-Phase with 2 Power Supplies, 4 Fans
with 8 HP Insight Control 30 Day Trial Licenses
NOTE: All c7000 BTO enclosures will ship with 15 server blanks. CTO
enclosures will ship with the required number of server blanks.
NOTE: New models of the c7000 enclosure (part numbers 5070xx-B21) come as
standard with the HP 2400W HE PSU and BladeSystem Onboard Administrator
with KVM.
507015-B21
507017-B21
507016-B21
507014-B21
HP Enclosure OptionsHP c7000 BladeSystem Onboard Administrator with KVM
NOTE: The HP c7000 OA supports the mixing with the HP c7000 OA with KVM.
The HP c7000 OA with KVM must be the active OA to provide the Enclosure
KVM feature. The KVM menu has an OA CLI button at the bottom, which allows
an OA administrator to log into the OA and be able to force a takeover so the OA
with KVM will become the standby OA. The OA Firmware Sync feature cannot
be used to update mismatched OA modules. Mismatched OA firmware versions
between the original c7000 OA and c7000 OA with KVM require the
administrator to use the GUI or CLI to update the OA from a file (http, ftp, tftp,
local client file using the GUI or USB key containing the OA firmware file).
NOTE: Models of the c7000 enclosure (P/Ns 507019-B21: 507015-B21, 507017-
B21, 507016-B21, 507014-B21) come with a BladeSystem Onboard
Administrator with KVM as standard. Order (P/N 456204-B21) when a second
redundant BladeSystem Onboard Administrator is desired for a c7000 enclosure.
HP c7000 Enclosure 10K Rack Ship Bracket Option Kit
NOTE: The shipping bracket is required when shipping a c7000 enclosure when
installed in a rack. It is not required for normal operation.
HP BladeSystem Replacement Enclosure Miscellaneous Blanks kit (contains 1
each of Power Supply Blank, Interconnect Module Blank, BladeSystem Onboard
Administrator Blank, Active Cool Fan Blank)
NOTE: This kit should only be ordered to replace lost or damaged blanks.
HP c-Class Server Blank and Coupler Option Kit (contains 1 x half-height server
blank with coupler)
NOTE: The coupler allows half-height server blanks to be coupled together to
create a full-height server blank.
NOTE: This kit should only be ordered to replace lost or damaged blanks.
HP Power SuppliesHP 2400W Platinum Efficiency Power Supply
NOTE: HP BladeSytem Power supplies meet multiple Energy Efficiency
Initiatives: 2400W, 94%: Climate Savers Computing Initiative PLATINUM and
ECOS Consulting 80 Plus PLATINUM.
HP 2400W High Efficiency Hot-Plug Power Supply (supplied with 2m/6ft IEC C20
- C19 jumper cord)
NOTE: HP BladeSytem Power supplies meet multiple Energy Efficiency
Initiatives: 2400W, 92%: Climate Savers Computing Initiative GOLD and ECOS
Consulting 80 Plus GOLD.
HP c7000 Enclosure 2250W Hot-Plug -48V DC Power Supply
HP BLc7000 -48V DC Power Input Module
NOTE: Mixing of power supplies in the same enclosure is not supported. All
power supplies must be of the same type, all HP 2400W HE, all HP2250W or all
456204-B21
433718-B21
412148-B21
412150-B21
588603-B21
499243-B21
AH332A
AH331A
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 17
QuickSpecs
Related Options
HP BladeSystem c7000 Enclosure
-48V DC.
NOTE: HP BladeSytem Power supplies meet multiple Energy Efficiency
Initiatives: 2400W, 92%: Climate Savers Computing Initiative GOLD and ECOS
Consulting 80 Plus GOLD.
NOTE: The 80 PLUS program is a unique forum that unites electric utilities, the
computer industry, and consumers in an effort to bring energy efficient
technology solutions to the marketplace. 80 Plus independently tests power
supply efficiency and publically posts the results on ."
HP Cooling OptionsHP c-Class Active Cool Fan
HP Active Cool 200 Fan Option Kit
NOTE: A minimum 4 Active Cool 200 Fans is required, 8 Active Cool 200 Fans
can support a full blade enclosure, 10 Active Cool 200 Fans should be ordered
for reduced power consumption and noise reduction. Some Blade configurations
require 10 fans.
HP BladeSystemHP Virtual Connect Flex-10 10Gb Ethernet Module for the c-Class BladeSystem
c-Class Network
HP Virtual Connect Flex-10 10Gb Enterprise Edition for c7000, No Media, 1-
Interconnects
Enclosure License including 1 year of 24x7 Technical Support and Upgrades
NOTE: Includes 2 x HP Virtual Connect Flex-10 10Gb Ethernet modules plus 1 x
VCEM BL-c7000 enclosure license. Customer will receive a printed license
entitlement certificate and 2 Virtual Connect modules as a single deliverable.
The license entitlement certificate must be redeemed online or via fax to obtain
the VCEM license activation key
NOTE: For additional license kits, please visit:
/products/quickspecs/12860_div/12860_
HP 1/10Gb-F Virtual Connect Ethernet Module for c-Class BladeSystem
HP ProCurve 6120G/XG Blade Switch
HP ProCurve 6120XG Blade Switch
Ethernet Pass-Through Module for HP BladeSystem
HP 10GbE Pass-Thru Module
Cisco Catalyst Blade Switch 3120X for HP
Cisco Catalyst Blade Switch 3120G for HP
Cisco Catalyst Blade Switch 3020 for HP c-Class BladeSystem
HP GbE2c Layer 2/3 Ethernet Blade Switch
HP 1:10 Gb Ethernet BL-c Switch
NOTE: The HP BladeSystem c-Class Network Interconnects ship as single units.
The above interconnects must be ordered in quantities of two for redundancy
support.
HP BladeSystemHP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem
c-Class SAN
HP Virtual Connect 8Gb 24-Port Fibre Channel Module for c-Class BladeSystem
Interconnects
HP Virtual Connect 8Gb 20-Port Fibre Channel Module for c-Class BladeSystem
16 port FC Pass-thru Module for c-Class BladeSystem
Brocade 8/12c SAN Switch for HP BladeSystem c-Class, Full Fabric
Brocade 8/24c SAN Switch for HP BladeSystem c-Class, Full Fabric
Brocade 8/24c SAN Switch Power Pack for HP BladeSystem c-Class, Full Fabric
Cisco MDS 9124e 12-port Fabric Switch
Cisco MDS 9124e 24-port Fabric Switch
HP StorageWorks SASHP StorageWorks 3Gb SAS BL Switch - Single Pack
Switch
HP StorageWorks 3Gb SAS BL Switch - Dual Pack
412140-B21
455880-B21
591973-B21
447047-B21
498358-B21
516733-B21
406740-B21
538113-B21
451439-B21
451438-B21
410916-B21
438030-B21
438031-B21
409513-B22
466482-B21
572018-B21
403626-B21
AJ820A
AJ821A
AJ822A
AG641A
AG642A
AJ864A
AJ865A
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 18
QuickSpecs
Related Options
HP BladeSystem
InfiniBand
Interconnects
HP BladeSystem c7000 Enclosure
HP Optical Drives
QLogic BLc 4X QDR IB Switch
QLogic BLc 4X QDR IB Mgmt Module
HP BLc 4X QDR IB Switch Module for HP c-Class BladeSystem
NOTE: Quad Data Rate (QDR) InfiniBand Switch Modules are only supported in
the RoHS 6 of 6 compliant enclosures and G6 Blades.
HP External USB DVD RW Drive
505958-B21
505959-B21
489184-B21
VV827AA
HP Insight SoftwareInsight Control
HP Insight Control, No Media, 8 Electronic Licenses for bundling with an
enclosure including 1 year of 24x7 Technical Support and Updates
HP Insight Control, No Media, 16 Electronic Licenses for bundling with an
enclosure including 1 year of 24x7 Technical Support and Updates
HP Insight Software Media Kit
NOTE: Insight Software DVD media without licenses. Contains Insight Control,
Insight Dynamics and Virtual Connect Enterprise Manager. Uses an integrated
installer to perform quick and accurate software installation and updates.
NOTE: Licenses ship without media. The Insight Control Media Kit can be
ordered separately, or can be downloaded at:
/go/insightupdates.
NOTE: The "for bundling with an enclosure" license kits can only be ordered
together with a BladeSystem c3000 or c7000 enclosure on the same order.
NOTE: Electronic licenses can be used to purchase multiple licenses with a
single activation key, and is available in all countries except China and Japan.
Customers in China and Japan should order the physical equivalent.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s).
Includes one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional license kits, please see the QuickSpecs at:
/products/quickspecs/12631_div/12631_
HP Insight Control for Linux
HP Insight Control for Linux, No Media, 8 Licenses for bundling with an
enclosure including 1 year of 24x7 Technical Support and Updates
HP Insight Control for Linux, No Media, 8 Licenses for bundling with an
enclosure including 1 year of 24x7 Technical Support and Updates, Electronic
HP Insight Control for Linux, No Media, 16 Licenses for bundling with an
enclosure including 1 year of 24x7 Technical Support and Updates
HP Insight Control for Linux, No Media, 16 Licenses for bundling with an
enclosure including 1 year of 24x7 Technical Support and Updates, Electronic
NOTE: Licenses ship without media. The Media pack for Insight Control for
Linux can be ordered separately, or can be downloaded at:
/go/ic-linux (click on Download button).
NOTE: Electronic licenses can be used to purchase multiple licenses with a
single activation key, and is available in all countries except China and Japan.
Customers in China and Japan should order the physical equivalent.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s).
Includes one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional license kits, please see the QuickSpecs at:
/products/quickspecs/13019_div/13019_
TC276AAE
TC277AAE
436222-B21
TC211A
TC211AAE
TC212A
TC212AAE
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 19
QuickSpecs
Related Options
HP Virtual Connect
Enterprise Manager
HP BladeSystem c7000 Enclosure
HP Virtual Connect Enterprise Manager for BL-c7000, No Media, 1-Enclosure
License including 1 year of 24x7 Technical Support and Updates
NOTE: This license allows 1 BL-c7000 enclosure to be managed with VCEM.
Customer will receive a printed license entitlement certificate via physical
shipment. The license entitlement certificate must be redeemed online or via fax
to obtain the license activation key(s). Includes one year of 24 x 7 HP Software
Technical Support and Update Service.
NOTE: For additional license kits, please visit:
/products/quickspecs/12860_div/12860_
459864-B21
HP c-Class Storage
Blades
HP StorageWorks SB40c storage blade
HP PCI Express Mezzanine pass-thru card for HP BladeSystem
NOTE: The mezzanine card is needed to support the SB40c storage blade (P/N
411243-B21) with HP c-Class BladeSystem full-height server blades.
HP StorageWorks SB40c Storage Blade and HP LeftHand VSA bundle
NOTE: Includes the SB40c Storage Blade and a single LeftHand P4000 VSA
license. LeftHand VSA software is installed in a virtual machine on a VMware
ESX host server adjacent to the SB40c.
NOTE: Includes 1 yr 9x5 software support for LeftHand P4000 VSA software.
NOTE: LeftHand P4000 VSA is supported on VMware ESX 3.0.2, 3.5 and ESX i
version 3.5
For detailed deployment information, see the HP LeftHand P4000 VSA in an HP
BladeSystem environment solution guide:
/bc/docs/support/SupportManual/c01729139/
NOTE: For additional license kits, please visit:
/products/quickspecs/12587_div/12587_
411243-B21
431643-B21
AT459A
HP Expansion BladesPCI Expansion Blade
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
/products/quickspecs/12753_div/12753_
HP PCI Express Mezzanine pass-thru card for HP BladeSystem
NOTE: The mezzanine card is needed to support the PCI Expansion Blade (P/N
448018-B21) with HP c-Class BladeSystem full-height server blades.
448018-B21
431643-B21
HP Ultrium Tape
Blades
HP Ultrium 448c Tape Blade
HP StorageWorks SB1760c Tape Blade
HP StorageWorks SB920c Tape Blade
NOTE: LTO-3 Ultrium technology.
HP PCI Express Mezzanine pass-thru card for HP BladeSystem
NOTE: The HP PCI Express Mezzanine Pass-Thru Card for HP BladeSystem
(431643-B21) is required when installing a tape blade adjacent to a full-height
server blade
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
/products/quickspecs/12729_div/12729_
440947-B21
AQ697A
AJ401A
431643-B21
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 20
QuickSpecs
Related Options
HP StorageWorks
Network Storage
Servers
HP BladeSystem c7000 Enclosure
HP StorageWorks X1800sb Network Storage Blade
NOTE: HP StorageWorks X1800sb Network Storage Blade is a flexible storage
server solution for BladeSystem environments. Combine the X1800sb with the
SB40c Storage Blade to enable file serving and iSCSI shared storage inside the
BladeSystem enclosure. The flexibility of the X1800sb extends to external
storage as well. The X1800sb can also be used as a low cost SAN gateway to
provide consolidated file-serving access to FC, SAS, or iSCSI SANs.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
/products/quickspecs/12786_div/12786_
HP StorageWorks X3800sb Network Storage Gateway
NOTE: The X3800sb Network Storage Gateway Blade is used to access FC,
SAS, or iSCSI SAN storage, translating file data from the server into blocks for
storage to provide consolidated file, print, and management hosting services in a
cluster-able package.
Built on the HP ProLiant BL460c Server Blade, the HP StorageWorks X3800sb
Network Storage Gateway Blade is a ready to deploy SAN gateway solution, with
Microsoft Storage Server 2008, Enterprise x64 Edition pre-installed. The HP
Rapid Start-up Wizard accelerates new deployments by walking you through
basic system settings step-by-step. The X3800sb also includes a Microsoft
Cluster Server (MSCS) license and Microsoft iSCSI Software Target.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
/products/quickspecs/13334_div/13334_
AP805A
AP806A
HP Power CordsHP LV Power Cords100 - 120V AC
HP 15A 125V NEMA 5-15P/IEC320-C19 3.6m/12ft, NA
HP 12A 125V NEMA 5-15P/ IEC320-C19 3.6m/12ft, JAPAN
HP 18A 125V NEMA 5-20P 4.5m/15ft, NA
HP C19 - C20 Jumper Cords
HP 16A IEC320-C19 to C20 1.2m/4ft, PDU cord, Flint Gray
HP 16A IEC320-C19 to C20 2m/6ft, PDU cord, Flint Gray
HP 16A IEC320--C19 to C20 2.5m/8ft PDU cord, Black
HP 16A IEC320-C19 to C20 4.5m/15ft, PDU cord, Black
HP HV Power Cords 200 - 240V AC
HP 16A 250V L6-30P/IEC320-C19 4.5m/15ft, NA
HP 16A 250V NEMA L 6-20P/IEC320-C19 3.6m/12ft, NA
HP 16A 250V NBR 14136/ IEC320-C19 2.5m/8ft, Brazil
HP 16A 250V IRAM 2073/IEC320-C19 2.5m/8ft, AR
HP 13A 250V BS-1363/IEC320-C19 3.6m /12ft, UK/Sing/HK
HP 16A 250V CEE7-VII/IEC320- C19 3.6m/12ft, EU
HP 15A 250V AS3112-3/IEC320-C19 3.6m/12ft, AU/NZ
HP 16A 250V SABS 164/IEC320-C-9 3.6m /12ft,
HP 16A 250V CEI23-50/IEC320-C19 3.6m /12ft, ITALY/CHILE
HP 16A 250V IEC309/IEC320-C19 3.6m/12ft, Denmark/Switzerland
HP 16A 250V IS 1293/IEC320-C19 2.5m /8ft, INDIA
HP 16A 250V SI-32/IEC320-C19 2.5m/8ft, ISRAEL
HP 16A 250V GB1002/IEC320-C19 2.5m/8 ft, CHINA
HP 16A 250V CNS690/IEC320-C19 2.5m/8 ft, TAWAIN
HP 16A 250V stripped end/IEC320-C19 4.5m /15ft, WW
235603-001
391222-291
E7802A
AF575A
AF574A
295633-B22
E7804A
E7805A
AF593A
AF592A
AF578A
359615-031
AF576A
AF577A
AF579A
AF580A
AF581A
AF582A
AF583A
AF584A
AF585A
E7806A
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 21
QuickSpecs
Related Options
HP Uninterruptible
Power Systems
HP BladeSystem c7000 Enclosure
HP Single-Phase UPS
HP R5500 VA 3U UPS, International
HP R5500 VA 3U UPS, NA/JPN
NOTE: For more information on the R5500 please consult the QuickSpecs at:
/products/quickspecs/11871_div/11871_
HP 3-Phase UPS
HP R8000/3 Uninterruptible Power System 6U North America
HP R8000/3 Uninterruptible Power System 6U International
HP R12000/3 Uninterruptible Power System 6U North America
HP R12000/3 Uninterruptible Power System 6U International
NOTE: For more information on the HP 3-Phase UPS products please consult
the QuickSpecs at:
/products/quickspecs/12857_div/12857_
NOTE: For additional information on sizing your server, please reference:
AF416A
AF426A
AF431A
AF432A
AF429A
AF430A
HP Rack SeriesHP Rack 10000 G2 Series (Graphite Metallic)
10642 G2 (42U) Rack Cabinet - Pallet
10642 G2 (42U) Rack Cabinet - Shock Pallet
HP 10642G2 1200mm Shock Rack
HP 10647G2 1200mm Shock Rack
NOTE: HP BladeSystem c7000 Enclosure is not supported in a 14U rack
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
/products/quickspecs/12402_div/12402_
(Worldwide)
NOTE: For additional information regarding Rack Cabinets, please see the
following URL: /go/rackandpower
AF001A
AF002A
AF092A
AF094A
HP Rack OptionsKeyboards and Monitors
TFT7600 Rackmount Keyboard Monitor US
HP TFT7600 G2 KVM Console Rackmount Keyboard US Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard UK Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard DE Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard FR Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard IT Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard ES Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard DK Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard NO Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard SE/FI Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard CH Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard PT Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard BE Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard JP Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard RU Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard Intl Monitor
AG052A
AZ870A
AZ871A
AZ872A
AZ873A
AZ874A
AZ875A
AZ876A
AZ877A
AZ878A
AZ879A
AZ880A
AZ881A
AZ882A
AZ883A
AZ884A
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 22
QuickSpecs
Related Options
HP BladeSystem c7000 Enclosure
HP TFT7600 G2 KVM Console Rackmount Keyboard US TAA Monitor
NOTE: For additional information regarding Rack Options, please see the
following URL: /go/rackandpower
HP KVM Switch Options
HP 2x8 Server Console Switch G2
HP 2x16 Server Console Switch G2
USB Interface Adapter - 1 pack
USB Virtual Media Interface Adapter
Serial Interface adapter - 1 Pack with power supply
NOTE: VT100 terminal emulation.
NOTE: Cat5e cables are required to connect Interface Adapters to Consoles
Switches. Cat52 cables can be found at the following URL:
/go/kvm
NOTE For additional information regarding KVM switches, Serial Console
servers, rack mount monitors, keyboards and all related options please see the
following URL: /go/kvm
HP Serial Console Server Options
HP 16 Port Serial Console Server (worldwide)
HP 48 Port Serial Console Server (worldwide)
Serial Adapter, RJ45-DB9 DCE Female, 1 Pack
Serial Adapter, RJ45-DB9 DCE Female, 8 Pack
NOTE: Cat5e cables are required to connect Serial Adapters to Serial Console
Servers. Additional Serial Adapters and Cat5e cables can be found at the
following URL: /go/kvm.
NOTE: For additional information regarding KVM switches, Serial Console
servers, rack mount monitors, keyboards and all related options please see the
following URL: /go/kvm.
Rack Options
HP 10642 G2 Front Door ALL
HP 10636 G2 Front Door ALL
10642 G2 (42U) Side Panels (set of two) (Graphite Metallic)
10636 G2 (36U) Side Panels (set of two) (Graphite Metallic)
10636 G2 Rear Extension Kit
600mm G2 Stabilizer Option Kit (Graphite)
600mm G2, Heavy Duty Stabilizer Option Kit (Graphite)
800mm G2, Heavy Duty Stabilizer Option Kit (Graphite)
NOTE: Supports 10000 G2 Series only.
HP 10000 G2 Rack Grounding Kit
600W 10K G2 Rack Tie Down
NOTE: For additional information regarding Rack Options, please see the
following URL: /hp.
AZ885A
AF616A
AF617A
336047-B21
AF603A
373035-B21
AF101A
AF102A
AF103A
AF110A
AF009A
AF019A
AF054A
AF056A
AF060A
AF062A
AF064A
AF068A
AF074A
AF076A
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 23
QuickSpecs
Related Options
HP BladeSystem c7000 Enclosure
HP Airflow Optimization
HP 10000 Series Rack Airflow Optimization Kit
NOTE: The Airflow Optimization kit is designed to prevent hot and cold air from
mixing thus optimizing the temperature at which the chilled air enters the racked
servers.
NOTE: When configuring racks through Factory Express, a Rack Optimization
kit will automatically ship with the rack. This kit is recommended for all other rack
configurations also.
AF090A
HP Tape BackupThe following options are supported in an Enterprise Backup Solution (EBS)
environment with the HP BladeSystem c-Class enclosure. Please visit:
/go/ebs for complete compatibility details.
HP StorageWorks MSL2024 Tape Library
HP StorageWorks MSL2024 1 LTO-4 Ultrium 1840 SCSI Drive Library
HP StorageWorks MSL2024 1 LTO-4 Ultrium 1840 4GB FC Library
HP StorageWorks MSL2024 1 LTO-3 Ultrium 920 SCSI Drive Library
HP StorageWorks MSL4048 Tape Library
HP StorageWorks MSL4048 2 LTO-4 Ultrium 1840 SCSI Drive Library
HP StorageWorks MSL4048 1 LTO-4 Ultrium 1840 4GB FC Library
HP StorageWorks MSL4048 2 LTO-4 Ultrium 1840 4GB FC Library
HP StorageWorks MSL4048 1 LTO-3 Ultrium 920 SCSI Tape Library
HP StorageWorks MSL4048 2 LTO-3 Ultrium 960 SCSI Drive Library
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information or to create a complete solution; reference current compatibility
information at: /go/ebs.
AJ033A
AJ034A
AH169A
AJ037A
AJ036A
AJ038A
AH171A
AG323A
HP Care Pack ServicesNOTE: HP Care Pack services for the c7000 Enclosure cover the enclosure,
power supplies and fans. HP qualified rack options are covered by these
services when installed within the same rack. HP supported c-Class enclosure
devices including pass thru, Ethernet interconnect and virtual connect modules
are also covered by the c7000 enclosure Care Pack services.
NOTE: SAN/Fabric switches for the HP c-Class BladeSystem are not covered
under the c7000 enclosure Care Packs, SAN/Fabric switches carry separate
Care Packs. SAN/Fabric Switch Care Pack service level support should always
be uplifted to match existing storage or server service level.
Hardware Services On-site Service
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years,
Electronic NOTE: Uplifts the Ethernet devices to the same level of service as the
c-class enclosure
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Support Plus 24
Onsite HW support 24x7, 4hr response and Insight Control for Linux SW
Updates, SW Tech support offsite, onsite at HP's discretion, 24x7 2hr response
time including. HP holidays, Electronic
Onsite HW support 24x7, 4hr response and Insight Control for BladeSystem SW
Updates, SW Tech support offsite, onsite at HP's discretion, 24x7 2hr response
time including. HP holidays, Electronic
UE477E
UE478E
UE479E
UE480E
UK137E
UH322E
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 24
QuickSpecs
Related Options
HP BladeSystem c7000 Enclosure
Installation & Start-up Services
HP BladeSystem c7000 Infrastructure Installation and Startup Service for Blade
Hardware and Insight Control Software, Electronic
HP BladeSystem C7000 Enhanced Network Installation and Startup Service,
Electronic
ProLiant BL c-Class Enclosure and Blade Hardware Installation, Electronic
ProLiant BL c-Class Blade Server Hardware Installation, Electronic
NOTE: For more information, customer/resellers can contact:
/services/bladesystemservices
NOTE: The HP Care Pack service part numbers below covers the HP Brocade
4Gb, 12 Port SAN Switch and Brocade 4/24/ SAN Switch.
Hardware Services On-site Service
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years,
Electronic
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Hardware Installation, Electronic
NOTE: The HP Care Pack service part numbers below covers the Brocade 4/24
SAN Switch Power Pack.
Hardware Services On-site Service
Support Plus
Onsite HW support, 8am-9pm, M-F, 4hr response and SW Tech support offsite,
onsite at HP's discretion, 8am-9pm, M-F 2hr response time excluding HP
holidays, Electronic
Support Plus 24
Onsite HW support 24x7, 4hr response and SW Tech support offsite, onsite at
HP's discretion, 24x7 2hr response time including HP holidays, Electronic
NOTE: The HP Care Pack service part numbers below covers the HP Cisco
MDS 9124e 12 port and 24 port Fabric Switch.
Hardware Services On-site Service
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years,
Electronic
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Hardware Installation, Electronic
Software Installation and StartUp Services
Provides for the Installation and Start-up of HP Insight Rapid Deployment
software, Electronic
NOTE: Provides installation on a Customer supplied server designated as a
Deployment Server. Includes the deployment of a single server. This new server
will be deployed using either one of the pre-configured scripts or an image. In
addition, the service will provide for the capture and storage of the configuration
of the newly deployed server and orientation on product usage. To be delivered
during standard office ours, standard office days.
Provides for the Installation and Start-up of System Insight Manager (Electronic)
Provides for the Installation and Startup of Insight Control for Linux
UE602E
UE603E
UE494E
UE493E
UE436E
UE437E
UE438E
UE439E
U5988E
UE728E
UE729E
UF313E
UF972E
UF973E
UF974E
U5988E
U5683E
UA041E
UF372E
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 25
QuickSpecs
Related Options
HP BladeSystem c7000 Enclosure
Software Operating Environment Care Packs
1 Year Microsoft operating environment software support 24x7 - 10 incidents
1 Year Red Hat operating system software support 24x7 - 10 incidents
1 Year SuSE operating system software support 24x7 - 10 incidents
NOTE: For more information, customer/resellers can contact:
/services/servers
BCS Flexible Care Packs Integrity blade server enclosure
NOTE: HP Care Pack services for the c7000 Enclosure cover the enclosure,
power supplies and fans. HP qualified rack options are covered by these
services when installed within the same rack. HP supported c-Class enclosure
devices including pass thru, Ethernet interconnect and virtual connect modules
are also covered by the c7000 enclosure Care Pack services.
NOTE: SAN/Fabric switches for the HP c-Class BladeSystem are not covered
under the c7000 enclosure Care Packs, SAN/Fabric switches carry separate
Care Packs. SAN/Fabric Switch Care Pack service level support should always
be uplifted to match existing storage or server service level.
Hardware Services On-site Service
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years,
Electronic
NOTE: Uplifts the Ethernet devices to the same level of service as the c-class
enclosure.
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Support Plus
Support Plus Service, 5-Day x 13-Hour Coverage
Support Plus 24
Support Plus 24 Service
Proactive 24 Service - Mission Critical proactive environment 24x7 4hr onsite
HW support
Critical Service - Mission Critical proactive environment 6-Hour Call-to-Repair
onsite HW support
Installation & Start-up Services
HP BladeSystem c7000 Infrastructure Installation and Startup Service for Blade
Hardware and Insight Control Software, Electronic
NOTE: The HP Care Pack service part numbers below covers the HP Brocade
4Gb, 12 Port SAN Switch and Brocade 4/24 SAN Switch.
Hardware Services On-site Service
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years,
Electronic
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Hardware Installation, Electronic
NOTE: The HP Care Pack service part numbers below covers the Brocade 4/24
SAN Switch Power Pack.
Hardware Services On-site Service
Support Plus
U9269E
U3408E
U9936E
HA101A3#6Q6
HA103A3#6Q6
HA104A3#6Q6
HA105A3#6Q6
HA109A3#6Q6
HA110A3#6Q6
HA111A3#6Q6
HA112A3#6Q6
HA114A1#57A
HA101A3#85J
HA103A3#85J
HA104A3#85J
HA105A3#85J
HA113A1#5D2
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 26
QuickSpecs
Related Options
HP BladeSystem c7000 Enclosure
Onsite HW support, 8am-9pm, M-F, 4hr response and SW Tech support offsite,
onsite at HP's discretion, 8am-9pm, M-F 2hr response time excluding HP
holidays, Electronic
Support Plus 24
Onsite HW support 24x7, 4hr response and SW Tech support offsite, onsite at
HP's discretion, 24x7 2hr response time including HP holidays, Electronic
NOTE: The HP Care Pack service part numbers below covers the HP Cisco
MDS 9124e 12 port and 24 port Fabric Switch.
Hardware Services On-site Service
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years,
Electronic
NOTE: Uplifts the Ethernet devices to the same level of service as the c-class
enclosure.
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Hardware Installation, Electronic
NOTE: For more information, customer/resellers can contact:
/services/servers
HA109A3#85K
HA110A3#85K
HA101A3#87L
HA103A3#87L
HA104A3#87L
HA105A3#87L
HA113A1#5D2
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 27
QuickSpecs
Storage
HP BladeSystem c7000 Enclosure
Figure 1Installing a tape blade adjacent to a half-heightFigure 2
server blade.
Installing a tape blade adjacent to a full-height
server blade.
Installing Tape or Storage Blade
DescriptionQuantityPosition
SupportedSupported
Connecting a tape orUp to 8 per HPOdd or Even
storage blade to anBladeSystem c-slots next to
adjacent half-heightClass c7000partner server
server blade (Figure 1)Enclosureblade
Comments
A tape or storage blade supports one partner server
blade, and one partner server blade supports one tape or
storage blade.
Identify the partner server blade to be installed with the
tape or storage. The two blades always occupy a pair of
slots, as follows: 1 & 2, 3 & 4, 5 & 6, 7 & 8, 9 & 10, 11 &
12, 13 & 14, 15 & 16.
If the partner server blade is installed in an odd-
numbered bay, the tape or storage blade is installed in
the adjacent even-numbered bay to the right.
If the partner server blade is installed in an even-
numbered bay, the tape or storage blade is installed in
the adjacent odd-numbered bay to the left.
A tape or storage blade supports one partner server
blade, and one partner server blade supports one tape or
storage blade.
When partnering a tape or storage blade with a full height
server blade, an HP PCI Express Mezzanine Pass-Thru
Card for BladeSystem c-Class (431643-B21) is required.
This card is installed in mezzanine 3 connector in the
server blade.
Identify the partner server blade to be installed with the
tape or storage blade. The two blades always occupy a
pair of slots, as follows: 9 & 10, 11 & 12, 13 & 14, 15 &
16.
The partner server blade is installed in an odd-numbered
bay. The tape or storage blade is installed in the adjacent
even-numbered bay to the right.
Connecting a tape or
storage blade to an
adjacent full-height
server blade (Figure 2)
Up to 4 per HPSlots 10, 12, 14,
BladeSystem c-or 16
Class c7000(lower bays only)
Enclosure
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 28
QuickSpecs
Storage
HP BladeSystem c7000 Enclosure
The tape or storage blade is always located on the lower
row of the enclosure in an even-numbered bay (slots 10,
12, 14 or 16)
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 29
QuickSpecs
Power Specifications
HP BLc7000 Enclosure 2400 Watts Platinum Efficiency Power Supply
Part Number588603-B21
Input Voltage Range (Vrms)200-240
Frequency Range (Nominal) (Hz)50 / 60
Nominal Input Voltage (Vrms)200208
Maximum Rated Output Wattage24502450
Nominal Input Current (A rms)13.913.4
Maximum Rated Input Wattage26922692
Rating (Watts)
Maximum Rated VA (Volt-Amp)27782778
Efficiency (%) at Max. Rated Output9191
Wattage
Power Factor0.980.98
Leakage Current (mA)0.971.01
Maximum Inrush Current (A peak)100100
Maximum Inrush Current duration1010
(mS)
Maximum British Thermal Unit Rating91869186
(BTU-Hr)
HP BladeSystem c7000 Enclosure
220
2450
12.6
2678
2762
91.5
0.98
1.06
100
10
9136
230
2450
12.0
2678
2762
91.5
0.98
1.11
100
10
9136
240
2450
11.4
2663
2747
92
0.98
1.16
100
10
9086
NOTE:
To review maximum system power ratings for facilities planning purposes use the Active Answers Power Calculator which is
available via the online tool located at URL: /go/bladesystem/powercalculator
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 30
QuickSpecs
Technical Specifications
HP BladeSystem c7000 Enclosure
Server Blade and Fan Population Guidelines
Fan bay numbering
Fans must be placed in the following bays
Number of FansFan Bays Used
44, 5, 9, 10
63, 4, 5, 8, 9, 10
81, 2, 4, 5, 6, 7, 9, 10
101, 2, 3, 4, 5, 6, 7, 8, 9, 10
NOTE: For correct operation fans and server blades must be installed in the correct bays. The BladeSystem Onboard
Administrator will ensure that fans and blades are correctly placed before allowing systems to power on.
Half-height server blade bay numbering
1. Device Bay 1
2. Device Bay 2
9. Device Bay 9
10. Device Bay 10
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 31
QuickSpecs
Technical Specifications
HP BladeSystem c7000 Enclosure
3. Device Bay 311. Device Bay 11
4. Device Bay 412. Device Bay 12
5. Device Bay 513. Device Bay 13
6. Device Bay 614. Device Bay 14
7. Device Bay 715. Device Bay 15
8. Device Bay 816. Device Bay 16
NOTE: Half-height servers should be populated from top and bottom from left to right from the front of the enclosure. So the
first two half-height servers would be placed in bays 1 & 9 the second two half-height servers would be placed in bays 2 & 10
and so on until the enclosure is full.
Full-height server blade bay numbering
1. Device Bay 15. Device Bay 5
2. Device Bay 26. Device Bay 6
3. Device Bay 37. Device Bay 7
4. Device Bay 48. Device Bay 8
NOTE: Full-height servers should be populated from left to right.
Mixed Configuration - Full Height and Half-Height Population rules
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 32
QuickSpecs
Technical Specifications
HP BladeSystem c7000 Enclosure
The c7000 enclosure is divided into 4 quadrants by the vertical support metalwork. Within each quadrant a removable
divider is used to support half height devices. To install a full-height blade in any quadrant this divider must be removed. As
a consequence a quadrant can only contain either full-height server blades or half-height server blades.
NOTE: Storage blades and Tape blades can be installed in the same quadrant as both full-height and half-height blades, a
bracket ships with each SB40c/Tape Blade that allows a half-height blade to be mounted on top of the storage blade.
NOTE: The lower tape or storage blade cannot be removed without first removing the upper half height blade.
HP BladeSystem
c7000 Server Blade
Enclosure
DimensionsHeight
Width
Depth
Height
Width
Depth
Unboxed
Shipping
Unboxed
17.4 in (442 mm)
17.6 in (447.04 mm)
32 in (813 mm)
29.88 in (759 mm)
23.88 in (607 mm)
39.88 in (1013 mm)
192 lb (87 kg)
235 lb (106.6 kg)
222 lb (100.7 kg)
265 lb (120.2 kg)
Shipping Dimensions
Single Phase
Enclosure Weight
Three -Phase
Enclosure NA/JPN
Shipping
Weight
Three-Phase EnclosureUnboxed
International Weight
Shipping
DC Input EnclosureUnboxed
Weight
Shipping
Max Enclosure WeightUnboxed
(approximate)
Shipping
Temperature RangeOperating
Non-Operating
Relative HumidityOperating
222 lb (100.7 kg)
265 lb (120.2 kg)
151 lb (68.5 kg)
194 lb (88 kg)
450 lb (204 kg)
493 lb (223.6 kg)
50° to 95° F (10° to 35° C)
-22° to 140° F (-30° to 60° C)
10 to 90% relative humidity (Rh), 28°C
(82.4°F) maximum wet bulb temperature, non-
condensing.
Non-Operating5 to 95% relative humidity (Rh), 38.7°C
(101.7°F)maximum wet bulb temperature,
non-condensing.
NOTE: Operating temperature has an altitude derating of 1.8° F (1° C) per 1,000 ft (304.8 m). No
direct sunlight. Upper operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-
operating limit is 30,000 ft (9,144 m) or 30.3 KPa/4.4 psia. Storage maximum humidity of 95% is
based on a maximum temperature of 113° F (45° C). Altitude maximum for storage is 70 KPa.
PowerInput Requirements -
Single Phase Model
Rated input frequency
2400W PSU
50 to 60 Hz
Rated input voltage
Rated input current
per power supply
Input Requirements -
Three Phase NA/JPN
Model
Rated input voltage
Rated input frequency
Rated input power
per power supply
200 to 208 VAC Line to Line
3-Phase Delta
50 to 60 Hz
200 to 240 VAC
13.9 A at 200 VAC
13.3 A at 208 VAC
12.6 A at 220 VAC
2780 VA
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 33
QuickSpecs
Technical Specifications
2250W PSU
HP BladeSystem c7000 Enclosure
2400W PSU
Input Requirements -
Three Phase
International Model
Rated input voltage
Rated input frequency
2250W PSU
2400W PSU
Max input current per22.6A at 200 VAC
line cord21.8A at 208 VAC
Max input power7836VA Max
per line cord
Max input current per24A at 200 VAC
line cord23.1A at 208 VAC
Max input power8340 VA Max
per line cord
346 VAC to 415 VAC Line to Line
200 VAC to 240 VAC Line to Neutral
3-Phase WYE
50 to 60 Hz
Max input current per11.9 A at 220 VAC
line cord10.9 A at 240VAC
Max input power7836 VA Max
per line cord
Max input current per12.6 A at 220 VAC
line cord11.5 A at 240VAC
Max input power
per line cord
36 to -72 VDC
75A
8340 VA Max
Input Requirements DCRated Input Voltage
Power
Max Input Current per
line cord
Max Input Power per line2700W
Cord
Power CordsSingle PhaseIEC-320 C19-C20 1.22m (6 ft)
3-Phase NA/JPN2 x NEMA L15-30p 2.44m (10 ft)
3-Phase International
-48V DC Power
2 x IEC-309 200/346 V - 240/415 V, 5-Pin, 6h
16A 2.44m (10 ft)
Terminal lug: 45DG 4AWG 1/4 2H
Two-hole lug
45 degree bend
0.25in. (6.4mm) stud hole size
0.63in. (16mm) hole spacing
200 - 240 VAC 2400 W 92% EfficiencyOutput
Specifications
(per power supply)
Acoustic Noise
HP 2400W High
Efficiency Hot-Plug
Power Supply
HP 2250W -48V DC Hot-2250W
Plug Power Supply
Listed are the declared A-Weighted sound power levels (LWAd) and
declared average bystander position A-Weighted sound pressure levels
(LpAm) when the product is operating in a 23°C ambient environment.
Noise emissions were measured in accordance with ISO 7779 (ECMA
74) and declared in accordance with ISO 9296 (ECMA 109).
Idle
LWAd7.1 Bels
LpAm54 dBA
Operating
LWAd7.2 Bels
LpAm54 dBA
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 34
QuickSpecs
Technical Specifications
Option KitsPower Supply Option
Shipping Dimensions
Height
Width
Depth
Weight
Fan Option ShippingHeight
Dimensions
Width
Depth
Weight
BladeSystem OnboardHeight
Administrator Option
Width
Shipping Dimensions
Depth
Weight
HP BladeSystem c7000 Enclosure
8.75 in (223 mm)
8.63 in (219 mm)
35.13 in (892 mm)
8.5 lbs (3.85 kg)
8.75 in (223 mm)
9.75 in (248 mm)
15.88 in (403 mm)
4.0 lbs (1.8 kg)
2.50 in (63.5 mm)
9.88 in (251 mm)
13.50 in (343 mm)
4.0 lbs (1.8 kg)
Environmental-friendlyEnd-of-life
Products andManagement and
ApproachRecycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and
recycling programs in many geographic areas. For trade-in information,
please go to /go/green. To recycle your product,
please go to: /go/green or contact your nearest HP
sales office. Products returned to HP will be recycled, recovered or
disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to
provide treatment information for each product type for use by treatment
facilities. This information (product disassembly instructions) is posted
on the Hewlett Packard web site at: /go/green. These
instructions may be used by recyclers and other WEEE treatment
facilities as well as HP OEM customers who integrate and re-sell HP
equipment.
© Copyright 2010 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation.
Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries.
AMD Opteron™ is a US registered trademark of AMD Corporation.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 35
2024年9月26日发(作者：夔蕊珠)
QuickSpecs
Overview
HP BladeSystem c7000 Enclosure
HP BladeSystem c7000 Enclosure - Front View
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
Device Bay 1
Device Bay 2
Device Bay 3
Device Bay 4
Device Bay 5
Device Bay 6
Device Bay 7
Device Bay 8
Device Bay 9
Device Bay 9
Device Bay 11
Device Bay 12
Device Bay 13
Device Bay 14
Device Bay 15
Device Bay 16
Power Supply Bay 1
Power Supply Bay 2
Power Supply Bay 3
Power Supply Bay 4
Power Supply Bay 5
Power Supply Bay 6
Insight Display
HP BladeSystem c7000 Enclosure - Rear View
1.
2.
3.
4.
Active Cool 200 Fans & fan bays
Interconnect Bays
BladeSystem Onboard Administrator
Power Inputs (single phase model shown)
What's New
Support for Ethernet and FC SAN interconnects
HP 2400W Platinum Efficiency Power Supply Opt
HP 6X 2400W Platinum Efficiency FIO Power Supply
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 1
QuickSpecs
Overview
HP BladeSystem c7000 Enclosure
At A Glance
This document covers the HP BladeSystem c7000 Enclosure. For more information on HP ProLiant Server Blades and HP
BladeSystem c-Class Interconnect Components please see the following QuickSpecs:
HP BladeSystem c-Class Server Blades:
/products/quickspecs/division/
HP BladeSystem c-Class Interconnect QuickSpecs:
/products/quickspecs/12524_div/12524_
HP BladeSystem c3000 Enclosure QuickSpecs:
/products/quickspecs/12790_div/12790_
HP BladeSystem solutions start with a BladeSystem c7000 Enclosure, optional c7000 hot-plug power supplies, HP Active
Cool Fans, and an optional redundant BladeSystem Onboard Administrator module. Once the enclosure has been selected,
the following components can be added: networking interconnect modules, HP ProLiant and Integrity Server Blades, and
Insight Control management software. Reference the QuickSpecs listed above.
Warranty - This product is covered by a global limited warranty and supported by HP Services and a worldwide
network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for three years from
date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Additional
support may be covered under the warranty or available for an additional fee. Enhancements to warranty services are
available through HP Care Pack services or customized service agreements.
Enclosure: Three-year parts and labor, on-site limited global warranty. Certain restrictions and exclusions apply
Enclosure options: Fans, Power Supplies, BladeSystem Onboard Administrator, 1 Year parts only or enclosure
warranty
HP BladeSystem Interconnects: 1 Year parts and labor, on-site regardless of the warranty period for the system
in which they are installed
HP Storage Fibre Channel switches have a maximum warranty period of one (1) year regardless of the warranty
period for the system in which they are installed
Hard drives have either a one year or three year warranty; refer to specific hard drive QuickSpecs for details.
For additional information please visit: /go/bladesystem
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 2
QuickSpecs
HP BladeSystem c-Class Overview
HP BladeSystem c7000 Enclosure
HP BladeSystem c-A BladeSystem c7000 enclosure holds up to 16 server and/or storage blades plus redundant
Class c7000 Enclosurenetwork and storage switches. It includes a shared, multi-terabit high-speed mid-plane for wire-
once connectivity of server blades to network and shared storage. Power is delivered through a
pooled power backplane that ensures the full capacity of the redundant hot-plug power supplies is
available to all blades.
Each c7000 enclosure is built with the following functions:
Up to 16 half-height and/or up to 8 full-height server blades and/or storage blades per
enclosure.
Up to 4 different interconnect fabrics (Ethernet, FC, IB, iSCSI, SAS, etc.) supported
simultaneously within the enclosure.
Choice of a single-phase, three-phase or a -48V DC power subsystem for flexibility in
connecting to datacenter power.
HP Thermal Logic technology for lower power consumption and airflow.
Four (4) or Ten (10) Active Cool 200 fans as standard. For redundancy and improved power
consumption and acoustics; additional Active Cool 200 Fan kits can be added for a
maximum of 10 fans.
Redundant hot-plug cooling, redundant hot-plug power supplies, redundant connections,
redundant interconnect modules, optional redundant BladeSystem Onboard Administrator
management modules.
Lowest cost of ownership.
Full AC redundancy - with no power zones.
An BladeSystem Onboard Administrator management module is built in to the enclosure with the
following functions:
Robust, multiple enclosure setup and control.
Reports asset and inventory information for the devices in the enclosure.
Reports thermal and power information, including real-time actual power usage per server
and per enclosure.
Front-mounted Insight Display for easy management within the datacenter.
Integrated access to all server blade iLOs from a single cable.
Provides integrated access to interconnect bay device management ports from the single
BladeSystem Onboard Administrator cable.
Single sign-on capability for all devices in the enclosure
Role-based security locally and/or with LDAP directory services.
Provides a wizard-based initial setup process for easy configuration.
A BladeSystem c7000 enclosure provides the following benefits:
With local and remote hardware management integrated across the solution, one full
enclosure can be managed as easily as one server.
Scalable: Management and network interconnects extend scalability beyond a single
enclosure, allowing resources to be pooled and shared across multiple enclosures.
Investment protection: Accommodates multiple server and network designs in one
enclosure.
Lower costs per server, in comparison to rack-mounted servers
Lower power consumption, in comparison to rack-mounted servers.
Lower airflow requirements, in comparison to rack-mounted servers
HP c3000 EnclosureFor customers that need a smaller system the c3000 is the perfect solution. Supporting up to 8
blades and 4 interconnects the c3000 enclosure provides and ideal solution for Small and Medium
businesses and remote sites for more information refer to the c3000 QuickSpecs at:
/products/quickspecs/12790_div/12790_
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 3
QuickSpecs
HP BladeSystem c-Class Overview
HP BladeSystem c7000 Enclosure
HP ProLiant & IntegrityDelivering best-in-class performance, choice and reliability on AMD Opteron™, Intel® Xeon® and
Server BladesIntel® Itanium 2® processors for Windows, Linux, Solaris, or HP-UX based servers; the HP
portfolio of server blades supports a variety of application requirements for scale-out
architectures. HP offers one-, two-, and four-processor server blades, with the widest range of
performance, and form factors.
For more information please see:
/products/quickspecs/division/
HP SB40c Storage
Blade
Direct attached storage
The StorageWorks SB40c Storage Blade delivers direct attached storage for c-Class servers, with
support for up to six hot plug small form factor (SFF) SAS or SATA hard disk drives. The
enclosure backplane provides a PCI Express connection to the adjacent c-Class server blade and
enables high performance storage access without any additional cables. The SB40c Storage
Blade features an onboard Smart Array P400 controller with 256 MB battery-backed write cache,
for increased performance and data protection.
Shared storage
Use HP LeftHand P4000 Virtual SAN Appliance (VSA) software to turn the SB40c into an iSCSI
SAN for use by all severs in the enclosure and any server on the network. HP LeftHand VSA
software is installed in a virtual machine on a VMware ESX host server adjacent to the SB40c. HP
LeftHand P4000 VSA turns the SB40c into a scalable and robust iSCSI SAN, featuring, storage
clustering for scalability, Network RAID for storage failover, thin provisioning, snapshots, remote
replication, and cloning. Expand capacity within the same enclosure or to other BladeSystem
enclosures by adding additional SB40c Storage Blades and HP LeftHand VSA licenses.
/products/quickspecs/12587_div/12587_
HP Ultrium Tape
Blades
The HP StorageWorks SB1760c is an LTO-4 Ultrium, 1.6 TB capacity on a single cartridge (2:1
compression), 576 GB/hr performance (2:1 compression), 128 MB buffer size, WORM capability,
AES 256-bit hardware data encryption capability.
The HP StorageWorks SB920c Tape Blade is an LTO-3 Ultrium tape blade that provides up to
800GB of capacity on a single data cartridge (2:1 compression) and performance up to 432GB/hr
(2:1 compression).
The Ultrium 448c Tape Blade is an LTO-2 Ultrium tape blade the provides up to 400GB of
capacity on a single data cartridge (2:1 compression) and performance up to 173GB/hr (2:1
compression).
Tape blades are ideal for HP BladeSystem c-Class customers who need a data protection solution
but are not connected into a Storage Area Network (SAN). They provide direct attach data
protection for the adjacent server and network backup protection for all other data within the
enclosure. The HP StorageWorks tape blades are the industry's first bladed tape drives and are
developed exclusively for the BladeSystem c-Class enclosures.
For more information, please visit:
/products/quickspecs/12729_div/12729_
HP StorageWorks
Network Storage
Servers
HP StorageWorks X1800sb Network Storage Blade
HP StorageWorks X1800sb Network Storage Blade is a flexible storage server solution for
BladeSystem environments. Combine the X1800sb with the SB40c Storage Blade to enable file
serving and iSCSI shared storage inside the BladeSystem enclosure. The flexibility of the
X1800sb extends to external storage as well. The X1800sb can also be used as a low cost SAN
gateway to provide consolidated file-serving access to FC, SAS, or iSCSI SANs.
NOTE: See the QuickSpecs for Technical Specifications and additional information:
/products/quickspecs/12786_div/12786_
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 4
QuickSpecs
HP BladeSystem c-Class Overview
HP BladeSystem c7000 Enclosure
HP StorageWorks X3800sb Network Storage Gateway
The X3800sb Network Storage Gateway Blade is used to access FC, SAS, or iSCSI SAN storage,
translating file data from the server into blocks for storage to provide consolidated file, print, and
management hosting services in a cluster-able package.
Built on the HP ProLiant BL460c Server Blade, the HP StorageWorks X3800sb Network Storage
Gateway Blade is a ready to deploy SAN gateway solution, with Microsoft Storage Server 2008,
Enterprise x64 Edition pre-installed. The HP Rapid Start-up Wizard accelerates new deployments
by walking you through basic system settings step-by-step. The X3800sb also includes a Microsoft
Cluster Server (MSCS) license and Microsoft iSCSI Software Target.
NOTE: See the QuickSpecs for Technical Specifications and additional information:
/products/quickspecs/13334_div/13334_
Dynamic Power
Capping
HP Dynamic Power Capping is the industry's first and only power capping solution that lets you
reclaim trapped power and cooling capacity without putting electrical infrastructure or server
performance at risk. The enclosure Dynamic Power Cap will be shared amongst all of the installed
devices and individual server caps will be changed to match the server load. This will optimize the
performance of the servers while ensuring that the enclosure stays below the cap value.
Rack Airflow
Requirements
Rack 10000 G2 series cabinets
The increasing power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. The G2 10000 Series Racks provide enhanced airflow for
maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.
NOTE: For operation with the DC Input Module the G2 1000 Series Rack Extension is required to
allow DC Power Cabling to be installed.
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure
adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear doors, you
must allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to
permit adequate airflow (equivalent to the required 64 percent open area for ventilation).
The clearance from face of rack to inside of the front door needs to be 1.75" minimum.
Side: The clearance between the installed rack component and the side panels of the rack
must be a minimum of 2.75 inches (7 cm).
Depth: Minimum 39.4 inches (1000mm) for AC power, 47 inches (1200mm) for DC Power
Input
Adjustable rack rails are shipped with each enclosure:
Minimum rail length: 25 inches (635mm)
Maximum rail length: 34 inches (864mm)
CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack.
This arrangement ensures proper airflow. Using a rack without blanking panels results in improper
cooling that can lead to thermal damage.
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 5
QuickSpecs
HP BladeSystem c-Class Overview
Factory Express
Portfolio for Servers
and Storage
HP BladeSystem c7000 Enclosure
HP Factory Express offers configuration, customization, integration and deployment services for
HP servers and storage products. Customers can choose how their factory solutions are built,
tested, integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading,
asset tagging and custom packaging. HP products supported through Factory Express include: a
wide array of servers and storage: HP Integrity, HP ProLiant & HP ProLiant & Integrity Server
Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable
tape libraries and configurable network switches.
For more information on Factory Express services for your specific server model please contact
your sales representative or go to: /go/factory-express
HP Enterprise
Configurator
The HP eConfigure Enterprise Configurator now provides factory default racking for our HP
hardware portfolio. This approach is aligned with our strategic direction to meet the needs and
expectations of our valued customers. If you require "custom" rack configuration, please contact
HP's Customer Business Center or an Authorized Partner for assistance.
/products/configurator
HP InsightHP Insight Foundation
management software
Managing the growing number of servers can be complex and
expensive for your organization. IT managers need to address changing
business needs with tools that meet the challenges of managing today's
complex Datacenters.
HP provides management solutions that are designed to simplify a
server's installation, configuration and maintenance throughout the
entire server lifecycle. This provides the customer with higher levels of
operational efficiency and highly reliable systems:
/go/foundation.
The foundation pack includes:
HP SmartStart
HP Management
HP ProLiant Firmware Maintenance
SmartStart version supported (minimum): SmartStart 7.60.
/servers/smartstart
HP Integrated Lights-OutHP Integrated Lights-Out (iLO) simplifies server setup, health
(iLO)monitoring, power and thermal control, and lights-out remote
administration of ProLiant ML, DL, and BL servers. HP iLO functions
without additional software and can be accessed from any location via a
web browser. HP iLO works hand-in-hand with HP Systems Insight
Manager, Insight Control and Insight Dynamics for ProLiant, helping
customers unleash the value of the ProLiant platform and deliver the
highest possible quality of IT service. For more information, visit:
/go/iLO
HP Insight ControlHP Insight Control, a product option, delivers essential infrastructure
management that can help save time and money by making it easy to
deploy, monitor, remote control, and optimize your IT infrastructure
through a single, simple management console.
Two versions of Insight Control are available, to serve environments
requiring either a Linux-based or a Windows-based central management
servers: HP Insight Control for Linux, and HP Insight Control. See
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 6
QuickSpecs
HP BladeSystem c-Class Overview
HP BladeSystem c7000 Enclosure
/go/insightcontrol
HP Insight Control includes one year of 24 x 7 HP Software Technical
Support and Update Service ensuring rapid access to HP support staff
and proactive delivery of software updates. For more information about
this service, please visit: /services/insight.
HP Insight Dynamics forHP Insight Dynamics for ProLiant, a product option, is an integrated
ProLiantcommand center that enables IT Staff personnel to continuously analyze
and optimize a converged infrastructure, while automating and reducing
the cost of common data center tasks by as much as 40 percent. As a
powerfully integrated by design toolkit to accelerate complex technology
projects and simplify daily operations that ultimately enable IT Staff
personnel to dynamically keep pace with the organizations changing
business requirements. It enables them to plan capacity and power
continuously, balance across physical and virtual resources, and ensure
cost-effective high availability. It also enables IT organizations to
provision infrastructure consistently and automatically from pools of
shared resources using a self-service portal. Resources provisioned can
range from a single virtual machine to complex multi-tier environments
and their associated physical and virtual resource requirements. In
addition to the previous functional benefits, it also provides a cost-
effective disaster recovery for physical and virtual environments that
works with HP StorageWorks Continuous Access software for both the
Enterprise Virtual Array and the XP storage array allowing application
environments to be reactivated in minutes with the touch of a button to a
remote location.
NOTE: For more information, visit:
/go/insightdynamics
HP BladeSystem PowerThe HP BladeSystem Power Sizer helps in sizing the power infrastructure needed for a HP
SizerBladeSystem solution. This sizer enables effective planning for the power consumption and heat
load of the BladeSystem at its site.
The sizer enables you to:
Select the type and number of components within each Blade Server and Blade Enclosure.
View the effect of component changes on the power consumption and heat loading.
Review server loading and determine power supply and power subsystem requirements.
Approximate electrical and heat load for facilities planning purposes.
The sizing estimate is based on component level power measurements for a system operating at
very high enterprise application loads.
Values obtained from the BladeSystem Power Sizer are estimates for planning purposes only.
Actual measured power consumption can be significantly lower or higher than the Power Sizer
estimates. Actual power consumption varies with application type, application utilization, and
ambient temperature.
The p-class BladeSystem and the c-Class BladeSystem solutions are supported in the
BladeSystem Power Sizer.
Available at: /go/bladesystem/powercalculator
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 7
QuickSpecs
HP BladeSystem c-Class Overview
HP Power Advisor
HP BladeSystem c7000 Enclosure
The HP Power Advisor is a tool provided by Hewlett-Packard to assist in the estimation of power
consumption and proper selection of components including power supplies at a system, rack, and
multi-rack level. A variety of additional features are also provided including a condensed bill of
materials, a cost of owner ship calculator, and a power report. The HP Power Advisor allows for
the mixing of rack, tower, blade, and other products in a single environment.
Available at: /go/hppoweradvisor
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 8
QuickSpecs
Service and Support
Service and Support
HP BladeSystem c7000 Enclosure
HP Care Pack Services: Packaged server and storage services for increased uptime,
productivity and ROI
When you buy HP server and storage products and solutions, it's also a good time to think about
what levels of support you may need. Our portfolio of service options reduce deployment and
management worries while helping you get the most out of your server and storage investments.
We take a holistic approach to your environment, bridging servers, blades, storage, software and
network infrastructures with our packaged HP Care Pack Services for servers and storage.
Protect your business beyond warranty
When it comes to robustness and reliability, standard computing equipment warranties have
matured along with technology. Good news that can also create problems stemming from
depending on standard warranties designed to only protect against product defects and some
downtime causes. Using a standard approach to warranty uplifts, such as HP Care Pack Services,
helps reduce downtime risks and provides operational consistency for mission-critical and
standard business computing.
HP Care Pack Services: Upgrading or extending standard server and storage warranties
cost effectively
HP Care Pack Services offer a standard reactive hardware and software support services suite
sold separately, or combined with our Support Plus and Support Plus 24 services. The portfolio
also provides a combination of integrated proactive and reactive services, such as Proactive 24
Service and Critical Service. In addition with HP Proactive Select, you can acquire the specific
proactive constancy and technical services. HP Proactive Select menu offers a broad set of
service options that you can mix and match depending on your specific requirements. Proactive
service options include offers for server, storage, network, SAN device, software, environment
and education services.
HP server and storage lifecycle support services offers a full spectrum of customer care-from
technology support to complex migrations to complete managed services. HP Factory Express
provides customization, integration and deployment services for turnkey solutions. HP Education
Services offer flexible, comprehensive training on to help your IT staff get the most out of your
server and storage investments. HP Financial solutions extend innovative financing and cost-
effective asset management programs-from purchase to equipment retirement.
Learn more: /services/servers and /services/storage
NOTE: Care Pack Services availability may vary by product and country.
HP Care Pack Services are sold by HP and HP Authorized Service Partners:
Services for customers purchasing from HP or an enterprise reseller are quoted using HP
order configuration tools.
Customers purchasing from a commercial reseller can find HP Care Pack Services at
/go/lookuptool
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 9
QuickSpecs
Service and Support
HP BladeSystem c7000 Enclosure
Recommended HP Care Pack Services for optimal satisfaction with your HP
product
Recommended
Services
3-Year HP Support Plus 24
For a higher return on your server and storage technology, our 3-year combined reactive support
service delivers integrated onsite hardware/software support services available 24x7x365,
including access to HP technical resources, 4-hour response onsite hardware support and
software updates.
Improve uptime with responsive hardware and software services
Enjoy consistent service coverage across geographically dispersed sites
Update HP software at a predictable cost
Increase customer satisfaction-with no interoperability gaps
/V2//5981-6638EEE
3-Year HP Hardware Support Onsite Call-to-Repair (CTR) Service, 6- or 24-hour
Provides your IT manager with a team of support specialists who will quickly begin troubleshooting
the system to help return the hardware to operating condition within 6 or 24 hours of the initial
service request to the HP Global Solution Center.
HP is committed to repairing your hardware within a maximum of six or twenty four hours. The
benefits include:
Improved system uptime
Predictable repair times
More effective IT resource planning
Consistent level of hardware support across your multi-technology systems
/V2//5981-6636ENN
HP BladeSystem c7000 Infrastructure (ICE + OS) Installation & Startup
Provides for the installation and startup including hardware and software, including deployment of
OS, HP SIM, RDP, RDP, PMP and VPM.
Efficient and effective HP BladeSystem c-Class infrastructure setup, server deployment,
and management
Delivery of the service at a mutually scheduled time convenient to your organization
Expedited installation, provided all service prerequisites are met prior to commencement of
service
Verification prior to installation that all service prerequisites are met
Reduced implementation time and cost
More effective IT resource planning
Increased data-center efficiency through reduction of manually intensive tasks
Allows IT resources to stay focused on their core tasks and priorities
Helps improve IT infrastructure uptime
Automated diagnosis and remote support for hardware problems (via HP Service Essentials
Remote Support Pack)
/V2//4AA0-5964ENW
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 10
QuickSpecs
Service and Support
Optional Services
HP BladeSystem c7000 Enclosure
Optional HP Care Pack Services that will enhance your HP product experience
HP Enhanced Network Installation & Startup for BladeSystem Switches
Provides for the configuration and testing of BladeSystem Ethernet interconnect switches to
facilitate proper implementation of network protocols and access to advanced features.
/V2//4aa0-5969ENW
3-Year HP Proactive 24
As an alternative to our recommended support level, for customers who want enhanced
operational effectiveness and proactive problem identification:
Provides improved stability, availability and operational effectiveness with an integrated hardware
and software support service that combines industry-leading reactive technical assistance with
proactive account services, giving your IT manage support from a team of service specialists.
/V2//4AA0-1614ENUC
HP Proactive Select Service
Customer needs on demand access to consulting, technical proactive services and education
courses
Provides a flexible way to purchase HP best-in-class consultancy and technical services. You can
buy Proactive Select Service Credits when you purchase your hardware and then use the credits
over the next 12 months.
/V2//4AA2-3842ENN
eSupportHP eSupport is a portfolio of technology-based services that assist you with managing your
business environment - from the desktop to the data center.
Support Portal
The HP support portal provides one-stop access to the information, tools and services you need
to manage the daily operations of your IT environment.
Features include:
Access to self-solve tools (including search technical knowledge base)
Efficient logging and tracking of support cases
Collaboration with other business and IT professionals
Download of patches and drivers
Access to diagnostic tools
Proactive notification of relevant information
Access to certain features of the support portal requires an HP service agreement. To access the
support portal, visit: /support
HP Insight Remote Support software delivers secure remote support for your HP Servers and
Storage, 24 X 7, so you can spend less time solving problems and more time focused on your
business. You can have your systems remotely monitored for hardware failure using secure
technology that's been proven at thousands of companies around the world. In many cases, you
can avoid problems before they occur.
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 11
QuickSpecs
Service and Support
Customer Technical
Training
HP BladeSystem c7000 Enclosure
In today's cost-conscious business environment, IT professionals, developers, consultants and
users face an interesting challenge: how to keep up with the latest technologies and expand
important skills while delivering profitable results on current projects. To help address this
challenge, HP offers innovative training solutions that help keep you up-to-date on virtualization,
server, storage, Insight Control, Citrix, Microsoft® and open source/Linux-related topics-while
spending less time away from business-critical activities.
HP Services AwardsHP Technology Services continues to be recognized for service and support excellence by
customers, partners, industry organizations and publications around the world. Recent honors and
award reflect our services team's dedications, technical expertise, professionalism and
uncompromising commitment to customer satisfaction.
Additional Services
Information
To learn more on HP ProLiant servers, HP BladeSystem servers and HP StorageWorks storage
products, please contact your HP sales representative or HP Authorized Channel Partner. Or visit:
/services/proliant or /services/bladesystem or
/hps/storage or /services/servers
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 12
QuickSpecs
Configuration Information Factory Integrated Models
For a complete configuration of the HP BladeSystem, please do the following:
HP BladeSystem c7000 Enclosure
Step 1: Select desired model, configuration and quantity of HP ProLiant server and
Storage blades
NOTE: For server blade information, please visit:
/products/quickspecs/division/
NOTE: For Storage Blade information, please visit:
/products/quickspecs/12587_div/12587_
Step 2: Determine quantity of HP BladeSystem c-Class Enclosures to purchase
and choose Required Options (One of the following from each list unless
otherwise noted):
NOTE: Each HP BladeSystem c-Class Server Blade Enclosure holds up to 16 half-height blades. Server blanks will be
shipped in all empty bays.
Base Server Blade Enclosure Configuration
HP BladeSystem
BLc7000 c-Class
Server Blade
Enclosures
HP BLc7000 CTO Enclosure
HP BLc7000 BCS CTO c-Class Enclosure
NOTE: CTO models include 1x BladeSystem Onboard Administrator with KVM,
4x Active Cool 200 Fans and 0x power supplies.
NOTE: All c-Class enclosures support HP ProLiant, Integrity and StorageWorks
blades in either mixed or homogenous configurations. The AD361C enclosure is
suggested for configurations primarily used with Integrity blades.
507019-B21
AD361C
Required Options (one of the following from each category unless otherwise
noted)
HP Power Suppliesc-Class Power Modules (1 per enclosure)
HP BLc7000 Single Phase Power Module, FIO
HP BLc7000 Three Phase Power Module, FIO, INT'L
HP BLc7000 Three Phase Power Module, FIO, NA/JPN
HP BLc7000 -48V DC Power Input Module
c-Class Power Supply (Up to 6)
HP 6X 2400W Platinum Efficiency FIO Power Supply
NOTE: The bundle includes a quantity of 6 HP 2400W High Efficiency PSU so a
full enclosure can be configured with a single part number.
NOTE: HP BladeSytem Power supplies meet multiple Energy Efficiency
Initiatives: 2400W, 94%: Climate Savers Computing Initiative PLATINUM and
ECOS Consulting 80 Plus PLATINUM.
HP 2400W Platinum Hot-Plug Power Supply (Single PSU supplied with 2m/6ft
IEC C20 - C19 jumper cord)
NOTE: HP BladeSytem Power supplies meet multiple Energy Efficiency
Initiatives: 2400W, 92%: Climate Savers Computing Initiative PLATINUM and
ECOS Consulting 80 Plus PLATINUM.
6x HP 2400W High Efficiency Hot-Plug Power Supply Bundle, FIO
NOTE: The bundle includes a quantity of 6 HP 2400W High Efficiency PSU so a
full enclosure can be configured with a single part number.
HP 2400W High Efficiency Hot-Plug Power Supply (Single PSU supplied with
2m/6ft IEC C20 - C19 jumper cord)
HP c7000 Enclosure 2250W Hot-Plug -48V DC Power Supply (single PSU)
NOTE: Only compatible with -48V DC Power Input Module.
413379-B21
413381-B21
413380-B21
AH331A
517521-B22
588603-B21
517521-B21
499243-B21
AH332A
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 13
QuickSpecs
Configuration Information Factory Integrated Models
HP BladeSystem c7000 Enclosure
HP Cooling Options
NOTE: Mixing of power supplies in the same enclosure is not supported. All
power supplies must be of the same type. All HP 2400W HE, all HP2250W or all
-48V DC.
NOTE: If Three Phase Power Module selected, a minimum of 3 Power Supply
Option Kits are needed. For full redundancy 6 Power Supply Option Kits are
required.
c-Class Active Cool Fan (Up to 6)
6x HP Active Cool 200 Fan Bundle, FIO
NOTE: The bundle includes a quantity of 6 HP Active Cool 200 Fans so a full
enclosure can be configured with a single part number.
HP Active Cool 200 Fan Option Kit (single fan)
NOTE: A minimum of 4 Active Cool 200 Fans is required, 8 Active Cool 200
Fans can support a full blade enclosure, 10 Active Cool 200 Fans should be
ordered for reduced power consumption and noise reduction.
NOTE: Single-Phase models may require additional power supplies. Fans should
be added to provide redundancy, reduce power consumption and reduce noise.
NOTE: Three-Phase models require a minimum of 6 Active Cool 200 Fans.
NOTE: Some Blade configurations require 10 fans.
517520-B21
412140-B21
Step 3: Select optional software bundle (if nothing is selected system will ship with
16 Insight Control and Insight Control for Linux Trial Licenses):
HP Insight SoftwareEnclosure Options
HP c-Class Insight Control for BladeSystem 16 Licenses, including 1 year of
24x7 Technical Support and Updates, FIO
HP c-Class Insight Control for BladeSystem 8 Licenses, including 1 year of 24x7
Technical Support and Updates, FIO
417688-B23
439034-B23
Step 4: Select optional Redundant BladeSystem Onboard Administrator Capability
HP c-Class Enclosure
Options
HP c7000 Onboard Administrator with KVM Option
NOTE: With 1 Gb/s Adapters.
NOTE: The HP c7000 OA supports the mixing with the HP c7000 OA with KVM.
The HP c7000 OA with KVM must be the active OA to provide the Enclosure
KVM feature. The KVM menu has an OA CLI button at the bottom, which allows
an OA administrator to log into the OA and be able to force a takeover so the OA
with KVM will become the standby OA. The OA Firmware Sync feature cannot
be used to update mismatched OA modules. Mismatched OA firmware versions
between the original c7000 OA and c7000 OA with KVM require the
administrator to use the GUI or CLI to update the OA from a file (http, ftp, tftp,
local client file using the GUI or USB key containing the OA firmware file).
NOTE: Models of the c7000 enclosure (part numbers 507019-B21 and AD361C)
come with a BladeSystem Onboard Administrator with KVM as standard. Order
this part number (456204-B21) when a second redundant BladeSystem Onboard
Administrator is desired for a c7000 enclosure.
456204-B21
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 14
QuickSpecs
Configuration Information Factory Integrated Models
HP BladeSystem c7000 Enclosure
Step 5: Select 1 or more interconnect modules for each enclosure
The following is a list of various HP BladeSystem c-Class interconnect modules (Virtual Connect, Ethernet, Fibre Channel,
InfiniBand, and SAS interconnects). For detailed interconnect options consult the specific interconnect QuickSpecs:
/products/blades/components/
A pair of interconnects must be ordered if redundancy is required.
NOTE: Options for specific c-Class interconnects are NOT included in the list below. Consult the individual interconnect
QuickSpecs to obtain part numbers for interconnect options such as cables, SFPs, etc.
HP BladeSystem
c-Class Network
Interconnects
HP Virtual Connect Flex-10 10Gb Ethernet Module for the c-Class BladeSystem
HP Virtual Connect Flex-10 10Gb Enterprise Edition for BladeSystem c7000
NOTE: Includes two HP Virtual Connect Flex-10 10Gb Ethernet modules plus
one BL-c7000 enclosure license for HP Virtual Connect Enterprise Manager
software. The license entitlement certificate must be redeemed online or via fax
to obtain the VCEM license activation key.
HP 1/10Gb-F Virtual Connect Ethernet Module for c-Class BladeSystem
HP ProCurve 6120G/XG Blade Switch
HP ProCurve 6120XG Blade Switch
Ethernet Pass-Through Module for HP BladeSystem
455880-B21
591973-B21
447047-B21
498358-B21
516733-B21
406740-B21
538113-B21
451439-B21
451438-B21
410916-B21
438030-B21
438031-B21
HP 10GbE Pass-Thru Module
Cisco Catalyst Blade Switch 3120X for HP
Cisco Catalyst Blade Switch 3120G for HP
Cisco Catalyst Blade Switch 3020 for HP c-Class BladeSystem
GbE2c Layer 2/3 Ethernet Blade Switch for c-Class BladeSystem
HP 1:10 Gb Ethernet BL-c Switch
NOTE: The HP BladeSystem c-Class Network Interconnects ship as single units.
The above interconnects must be ordered in quantities of two for redundancy
support.
HP BladeSystemHP Virtual Connect 8Gb 24-Port Fibre Channel Module for c-Class BladeSystem
c-Class SAN
HP Virtual Connect 8Gb 20-Port Fibre Channel Module for c-Class BladeSystem
Interconnects
16 port FC Pass-thru Module for c-Class BladeSystem
Brocade 8/12c SAN Switch for HP BladeSystem c-Class, Full Fabric
Brocade 8/24c SAN Switch for HP BladeSystem c-Class, Full Fabric
Brocade 8/24c SAN Switch Power Pack for HP BladeSystem c-Class, Full Fabric
Brocade 8/12c SAN Switch 12-port Upgrade LTU
Cisco MDS 9124eCisco MDS 9124e 12-port Fabric Switch
Fabric Switch for HP c-
Cisco MDS 9124e 24-port Fabric Switch
Class BladeSystem
Cisco MDS 9124e 12-port Upgrade LTU
HP StorageWorks SASHP StorageWorks 3Gb SAS BL Switch - Single Pack
Switch
HP StorageWorks 3Gb SAS BL Switch - Dual Pack
HP BladeSystemQLogic BLc 4X QDR IB Switch for HP BladeSystem c-Class
InfiniBand
QLogic BLc 4X QDR IB Management Module
Interconnects
HP BLc 4X QDR IB Switch Module for HP c-Class BladeSystem
NOTE: Quad Data Rate (QDR) InfiniBand Switch Modules are only supported in
the RoHS 6 of 6 compliant enclosures (part numbers starting with 507) and G6
Blades.
466482-B21
572018-B21
403626-B21
AJ820A
AJ821A
AJ822A
T5517A
AG641A
AG642A
T5169A
AJ864A
AJ865A
505958-B21
505959-B21
489184-B21
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 15
QuickSpecs
Configuration Information Factory Integrated Models
NOTE: A pair of PDUs must be ordered for AC Feed redundancy.
HP BladeSystem c7000 Enclosure
Step 6: Select rack power distribution for single-phase models
HP Power DistributionHP Monitored Power Distribution Unit
Units
HP 17.3 kVA S348 Monitored PDU- single input, 3Ø, 48A (NA/JPN)
HP 14.4 kVA S340 Monitored PDU - single input 3Ø, 40A (NA/JPN)
HP 22 kVA S332 Monitored PDU- single input, 3-phase, 32A (INTL)
HP Modular Power Distribution Units
HP 17.3 kVA Modular PDU, 48A 3Ø, Core Only (NA/JPN)
HP 14.4 kVA Modular PDU, 40A 3Ø, Core Only (NA/JPN)
HP 22 kVA Modular PDU, 32A 3Ø, Core Only (Intl)
HP 8.6 kVA Modular PDU 24A 3Ø Core Only (NA/JPN)
HP 11 kVA Modular PDU 16A 3Ø Core Only (Intl)
HP 8,3k VA Modular PDU 40 Amp Core Only (NA/JPN)
HP 9.2kVA Modular PDU 40 Amp Core Only (Intl)
HP7.3kVA Modular PDU 32 Amp Core Only (Intl)
HP 4.9kVA Modular PDU 24 Amp Core Only (NA/JPN)
NOTE: The Core Only Modular Power Distribution Unit Kits excludes the
extension bars as they are not required with the HP BladeSystem
HP Two C-13 PDU Extension Bars
NOTE: Each extension bar has a C19 input and 7 C13 receptacles. The option is
ideal for model S348, and, model S332, which both have only C19 outlets (12)
and for all Core Only Modular PDUs.
AF916A
AF536A
AF917A
AF511A
AF519A
AF518A
AF512A
AF513A
252663-D75
252663-B34
252663-B33
252663-D74
AF500A
Step 7: Select optional Power Cords for Single Phase Model (country specific
power cords are listed under options)
NOTE: Default power cord is a 6ft IEC C19 - C20 cord
HP Power DistributionHP 16A IEC320-C19 to C20 1.2m/4ft PDU cord, Grey
Units Power cords
HP 16A IEC320-C19 to C20 2m /6ft PDU cord, Grey
(HP C19 to C20)
HP 16A IEC320-C19 to C20 2.5m/8ft PDU cord, Black
HP 16A IEC320-C19 to C20 4.5m/15ft PDU cord, Black
AF575A
AF574A
295633-B22
E7804A
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 16
QuickSpecs
Related Options
HP BladeSystem
c-Class Server Blade
Enclosures
HP BladeSystem c7000 Enclosure
HP BladeSystem c7000 Enclosure, Single-Phase with 6 Power Supplies, 10
Fans with 16 HP Insight Control Licenses
HP BladeSystem c7000 Enclosure, Three-Phase North America/Japan with 6
Power Supplies, 10 Fans with 16 HP Insight Control Licenses
HP BladeSystem c7000 Enclosure, Three-Phase International with 6 Power
Supplies, 10 Fans with 16HP Insight Control Licenses
HP BladeSystem c7000 Enclosure, Single-Phase with 2 Power Supplies, 4 Fans
with 8 HP Insight Control 30 Day Trial Licenses
NOTE: All c7000 BTO enclosures will ship with 15 server blanks. CTO
enclosures will ship with the required number of server blanks.
NOTE: New models of the c7000 enclosure (part numbers 5070xx-B21) come as
standard with the HP 2400W HE PSU and BladeSystem Onboard Administrator
with KVM.
507015-B21
507017-B21
507016-B21
507014-B21
HP Enclosure OptionsHP c7000 BladeSystem Onboard Administrator with KVM
NOTE: The HP c7000 OA supports the mixing with the HP c7000 OA with KVM.
The HP c7000 OA with KVM must be the active OA to provide the Enclosure
KVM feature. The KVM menu has an OA CLI button at the bottom, which allows
an OA administrator to log into the OA and be able to force a takeover so the OA
with KVM will become the standby OA. The OA Firmware Sync feature cannot
be used to update mismatched OA modules. Mismatched OA firmware versions
between the original c7000 OA and c7000 OA with KVM require the
administrator to use the GUI or CLI to update the OA from a file (http, ftp, tftp,
local client file using the GUI or USB key containing the OA firmware file).
NOTE: Models of the c7000 enclosure (P/Ns 507019-B21: 507015-B21, 507017-
B21, 507016-B21, 507014-B21) come with a BladeSystem Onboard
Administrator with KVM as standard. Order (P/N 456204-B21) when a second
redundant BladeSystem Onboard Administrator is desired for a c7000 enclosure.
HP c7000 Enclosure 10K Rack Ship Bracket Option Kit
NOTE: The shipping bracket is required when shipping a c7000 enclosure when
installed in a rack. It is not required for normal operation.
HP BladeSystem Replacement Enclosure Miscellaneous Blanks kit (contains 1
each of Power Supply Blank, Interconnect Module Blank, BladeSystem Onboard
Administrator Blank, Active Cool Fan Blank)
NOTE: This kit should only be ordered to replace lost or damaged blanks.
HP c-Class Server Blank and Coupler Option Kit (contains 1 x half-height server
blank with coupler)
NOTE: The coupler allows half-height server blanks to be coupled together to
create a full-height server blank.
NOTE: This kit should only be ordered to replace lost or damaged blanks.
HP Power SuppliesHP 2400W Platinum Efficiency Power Supply
NOTE: HP BladeSytem Power supplies meet multiple Energy Efficiency
Initiatives: 2400W, 94%: Climate Savers Computing Initiative PLATINUM and
ECOS Consulting 80 Plus PLATINUM.
HP 2400W High Efficiency Hot-Plug Power Supply (supplied with 2m/6ft IEC C20
- C19 jumper cord)
NOTE: HP BladeSytem Power supplies meet multiple Energy Efficiency
Initiatives: 2400W, 92%: Climate Savers Computing Initiative GOLD and ECOS
Consulting 80 Plus GOLD.
HP c7000 Enclosure 2250W Hot-Plug -48V DC Power Supply
HP BLc7000 -48V DC Power Input Module
NOTE: Mixing of power supplies in the same enclosure is not supported. All
power supplies must be of the same type, all HP 2400W HE, all HP2250W or all
456204-B21
433718-B21
412148-B21
412150-B21
588603-B21
499243-B21
AH332A
AH331A
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 17
QuickSpecs
Related Options
HP BladeSystem c7000 Enclosure
-48V DC.
NOTE: HP BladeSytem Power supplies meet multiple Energy Efficiency
Initiatives: 2400W, 92%: Climate Savers Computing Initiative GOLD and ECOS
Consulting 80 Plus GOLD.
NOTE: The 80 PLUS program is a unique forum that unites electric utilities, the
computer industry, and consumers in an effort to bring energy efficient
technology solutions to the marketplace. 80 Plus independently tests power
supply efficiency and publically posts the results on ."
HP Cooling OptionsHP c-Class Active Cool Fan
HP Active Cool 200 Fan Option Kit
NOTE: A minimum 4 Active Cool 200 Fans is required, 8 Active Cool 200 Fans
can support a full blade enclosure, 10 Active Cool 200 Fans should be ordered
for reduced power consumption and noise reduction. Some Blade configurations
require 10 fans.
HP BladeSystemHP Virtual Connect Flex-10 10Gb Ethernet Module for the c-Class BladeSystem
c-Class Network
HP Virtual Connect Flex-10 10Gb Enterprise Edition for c7000, No Media, 1-
Interconnects
Enclosure License including 1 year of 24x7 Technical Support and Upgrades
NOTE: Includes 2 x HP Virtual Connect Flex-10 10Gb Ethernet modules plus 1 x
VCEM BL-c7000 enclosure license. Customer will receive a printed license
entitlement certificate and 2 Virtual Connect modules as a single deliverable.
The license entitlement certificate must be redeemed online or via fax to obtain
the VCEM license activation key
NOTE: For additional license kits, please visit:
/products/quickspecs/12860_div/12860_
HP 1/10Gb-F Virtual Connect Ethernet Module for c-Class BladeSystem
HP ProCurve 6120G/XG Blade Switch
HP ProCurve 6120XG Blade Switch
Ethernet Pass-Through Module for HP BladeSystem
HP 10GbE Pass-Thru Module
Cisco Catalyst Blade Switch 3120X for HP
Cisco Catalyst Blade Switch 3120G for HP
Cisco Catalyst Blade Switch 3020 for HP c-Class BladeSystem
HP GbE2c Layer 2/3 Ethernet Blade Switch
HP 1:10 Gb Ethernet BL-c Switch
NOTE: The HP BladeSystem c-Class Network Interconnects ship as single units.
The above interconnects must be ordered in quantities of two for redundancy
support.
HP BladeSystemHP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem
c-Class SAN
HP Virtual Connect 8Gb 24-Port Fibre Channel Module for c-Class BladeSystem
Interconnects
HP Virtual Connect 8Gb 20-Port Fibre Channel Module for c-Class BladeSystem
16 port FC Pass-thru Module for c-Class BladeSystem
Brocade 8/12c SAN Switch for HP BladeSystem c-Class, Full Fabric
Brocade 8/24c SAN Switch for HP BladeSystem c-Class, Full Fabric
Brocade 8/24c SAN Switch Power Pack for HP BladeSystem c-Class, Full Fabric
Cisco MDS 9124e 12-port Fabric Switch
Cisco MDS 9124e 24-port Fabric Switch
HP StorageWorks SASHP StorageWorks 3Gb SAS BL Switch - Single Pack
Switch
HP StorageWorks 3Gb SAS BL Switch - Dual Pack
412140-B21
455880-B21
591973-B21
447047-B21
498358-B21
516733-B21
406740-B21
538113-B21
451439-B21
451438-B21
410916-B21
438030-B21
438031-B21
409513-B22
466482-B21
572018-B21
403626-B21
AJ820A
AJ821A
AJ822A
AG641A
AG642A
AJ864A
AJ865A
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 18
QuickSpecs
Related Options
HP BladeSystem
InfiniBand
Interconnects
HP BladeSystem c7000 Enclosure
HP Optical Drives
QLogic BLc 4X QDR IB Switch
QLogic BLc 4X QDR IB Mgmt Module
HP BLc 4X QDR IB Switch Module for HP c-Class BladeSystem
NOTE: Quad Data Rate (QDR) InfiniBand Switch Modules are only supported in
the RoHS 6 of 6 compliant enclosures and G6 Blades.
HP External USB DVD RW Drive
505958-B21
505959-B21
489184-B21
VV827AA
HP Insight SoftwareInsight Control
HP Insight Control, No Media, 8 Electronic Licenses for bundling with an
enclosure including 1 year of 24x7 Technical Support and Updates
HP Insight Control, No Media, 16 Electronic Licenses for bundling with an
enclosure including 1 year of 24x7 Technical Support and Updates
HP Insight Software Media Kit
NOTE: Insight Software DVD media without licenses. Contains Insight Control,
Insight Dynamics and Virtual Connect Enterprise Manager. Uses an integrated
installer to perform quick and accurate software installation and updates.
NOTE: Licenses ship without media. The Insight Control Media Kit can be
ordered separately, or can be downloaded at:
/go/insightupdates.
NOTE: The "for bundling with an enclosure" license kits can only be ordered
together with a BladeSystem c3000 or c7000 enclosure on the same order.
NOTE: Electronic licenses can be used to purchase multiple licenses with a
single activation key, and is available in all countries except China and Japan.
Customers in China and Japan should order the physical equivalent.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s).
Includes one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional license kits, please see the QuickSpecs at:
/products/quickspecs/12631_div/12631_
HP Insight Control for Linux
HP Insight Control for Linux, No Media, 8 Licenses for bundling with an
enclosure including 1 year of 24x7 Technical Support and Updates
HP Insight Control for Linux, No Media, 8 Licenses for bundling with an
enclosure including 1 year of 24x7 Technical Support and Updates, Electronic
HP Insight Control for Linux, No Media, 16 Licenses for bundling with an
enclosure including 1 year of 24x7 Technical Support and Updates
HP Insight Control for Linux, No Media, 16 Licenses for bundling with an
enclosure including 1 year of 24x7 Technical Support and Updates, Electronic
NOTE: Licenses ship without media. The Media pack for Insight Control for
Linux can be ordered separately, or can be downloaded at:
/go/ic-linux (click on Download button).
NOTE: Electronic licenses can be used to purchase multiple licenses with a
single activation key, and is available in all countries except China and Japan.
Customers in China and Japan should order the physical equivalent.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s).
Includes one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional license kits, please see the QuickSpecs at:
/products/quickspecs/13019_div/13019_
TC276AAE
TC277AAE
436222-B21
TC211A
TC211AAE
TC212A
TC212AAE
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 19
QuickSpecs
Related Options
HP Virtual Connect
Enterprise Manager
HP BladeSystem c7000 Enclosure
HP Virtual Connect Enterprise Manager for BL-c7000, No Media, 1-Enclosure
License including 1 year of 24x7 Technical Support and Updates
NOTE: This license allows 1 BL-c7000 enclosure to be managed with VCEM.
Customer will receive a printed license entitlement certificate via physical
shipment. The license entitlement certificate must be redeemed online or via fax
to obtain the license activation key(s). Includes one year of 24 x 7 HP Software
Technical Support and Update Service.
NOTE: For additional license kits, please visit:
/products/quickspecs/12860_div/12860_
459864-B21
HP c-Class Storage
Blades
HP StorageWorks SB40c storage blade
HP PCI Express Mezzanine pass-thru card for HP BladeSystem
NOTE: The mezzanine card is needed to support the SB40c storage blade (P/N
411243-B21) with HP c-Class BladeSystem full-height server blades.
HP StorageWorks SB40c Storage Blade and HP LeftHand VSA bundle
NOTE: Includes the SB40c Storage Blade and a single LeftHand P4000 VSA
license. LeftHand VSA software is installed in a virtual machine on a VMware
ESX host server adjacent to the SB40c.
NOTE: Includes 1 yr 9x5 software support for LeftHand P4000 VSA software.
NOTE: LeftHand P4000 VSA is supported on VMware ESX 3.0.2, 3.5 and ESX i
version 3.5
For detailed deployment information, see the HP LeftHand P4000 VSA in an HP
BladeSystem environment solution guide:
/bc/docs/support/SupportManual/c01729139/
NOTE: For additional license kits, please visit:
/products/quickspecs/12587_div/12587_
411243-B21
431643-B21
AT459A
HP Expansion BladesPCI Expansion Blade
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
/products/quickspecs/12753_div/12753_
HP PCI Express Mezzanine pass-thru card for HP BladeSystem
NOTE: The mezzanine card is needed to support the PCI Expansion Blade (P/N
448018-B21) with HP c-Class BladeSystem full-height server blades.
448018-B21
431643-B21
HP Ultrium Tape
Blades
HP Ultrium 448c Tape Blade
HP StorageWorks SB1760c Tape Blade
HP StorageWorks SB920c Tape Blade
NOTE: LTO-3 Ultrium technology.
HP PCI Express Mezzanine pass-thru card for HP BladeSystem
NOTE: The HP PCI Express Mezzanine Pass-Thru Card for HP BladeSystem
(431643-B21) is required when installing a tape blade adjacent to a full-height
server blade
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
/products/quickspecs/12729_div/12729_
440947-B21
AQ697A
AJ401A
431643-B21
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 20
QuickSpecs
Related Options
HP StorageWorks
Network Storage
Servers
HP BladeSystem c7000 Enclosure
HP StorageWorks X1800sb Network Storage Blade
NOTE: HP StorageWorks X1800sb Network Storage Blade is a flexible storage
server solution for BladeSystem environments. Combine the X1800sb with the
SB40c Storage Blade to enable file serving and iSCSI shared storage inside the
BladeSystem enclosure. The flexibility of the X1800sb extends to external
storage as well. The X1800sb can also be used as a low cost SAN gateway to
provide consolidated file-serving access to FC, SAS, or iSCSI SANs.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
/products/quickspecs/12786_div/12786_
HP StorageWorks X3800sb Network Storage Gateway
NOTE: The X3800sb Network Storage Gateway Blade is used to access FC,
SAS, or iSCSI SAN storage, translating file data from the server into blocks for
storage to provide consolidated file, print, and management hosting services in a
cluster-able package.
Built on the HP ProLiant BL460c Server Blade, the HP StorageWorks X3800sb
Network Storage Gateway Blade is a ready to deploy SAN gateway solution, with
Microsoft Storage Server 2008, Enterprise x64 Edition pre-installed. The HP
Rapid Start-up Wizard accelerates new deployments by walking you through
basic system settings step-by-step. The X3800sb also includes a Microsoft
Cluster Server (MSCS) license and Microsoft iSCSI Software Target.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
/products/quickspecs/13334_div/13334_
AP805A
AP806A
HP Power CordsHP LV Power Cords100 - 120V AC
HP 15A 125V NEMA 5-15P/IEC320-C19 3.6m/12ft, NA
HP 12A 125V NEMA 5-15P/ IEC320-C19 3.6m/12ft, JAPAN
HP 18A 125V NEMA 5-20P 4.5m/15ft, NA
HP C19 - C20 Jumper Cords
HP 16A IEC320-C19 to C20 1.2m/4ft, PDU cord, Flint Gray
HP 16A IEC320-C19 to C20 2m/6ft, PDU cord, Flint Gray
HP 16A IEC320--C19 to C20 2.5m/8ft PDU cord, Black
HP 16A IEC320-C19 to C20 4.5m/15ft, PDU cord, Black
HP HV Power Cords 200 - 240V AC
HP 16A 250V L6-30P/IEC320-C19 4.5m/15ft, NA
HP 16A 250V NEMA L 6-20P/IEC320-C19 3.6m/12ft, NA
HP 16A 250V NBR 14136/ IEC320-C19 2.5m/8ft, Brazil
HP 16A 250V IRAM 2073/IEC320-C19 2.5m/8ft, AR
HP 13A 250V BS-1363/IEC320-C19 3.6m /12ft, UK/Sing/HK
HP 16A 250V CEE7-VII/IEC320- C19 3.6m/12ft, EU
HP 15A 250V AS3112-3/IEC320-C19 3.6m/12ft, AU/NZ
HP 16A 250V SABS 164/IEC320-C-9 3.6m /12ft,
HP 16A 250V CEI23-50/IEC320-C19 3.6m /12ft, ITALY/CHILE
HP 16A 250V IEC309/IEC320-C19 3.6m/12ft, Denmark/Switzerland
HP 16A 250V IS 1293/IEC320-C19 2.5m /8ft, INDIA
HP 16A 250V SI-32/IEC320-C19 2.5m/8ft, ISRAEL
HP 16A 250V GB1002/IEC320-C19 2.5m/8 ft, CHINA
HP 16A 250V CNS690/IEC320-C19 2.5m/8 ft, TAWAIN
HP 16A 250V stripped end/IEC320-C19 4.5m /15ft, WW
235603-001
391222-291
E7802A
AF575A
AF574A
295633-B22
E7804A
E7805A
AF593A
AF592A
AF578A
359615-031
AF576A
AF577A
AF579A
AF580A
AF581A
AF582A
AF583A
AF584A
AF585A
E7806A
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 21
QuickSpecs
Related Options
HP Uninterruptible
Power Systems
HP BladeSystem c7000 Enclosure
HP Single-Phase UPS
HP R5500 VA 3U UPS, International
HP R5500 VA 3U UPS, NA/JPN
NOTE: For more information on the R5500 please consult the QuickSpecs at:
/products/quickspecs/11871_div/11871_
HP 3-Phase UPS
HP R8000/3 Uninterruptible Power System 6U North America
HP R8000/3 Uninterruptible Power System 6U International
HP R12000/3 Uninterruptible Power System 6U North America
HP R12000/3 Uninterruptible Power System 6U International
NOTE: For more information on the HP 3-Phase UPS products please consult
the QuickSpecs at:
/products/quickspecs/12857_div/12857_
NOTE: For additional information on sizing your server, please reference:
AF416A
AF426A
AF431A
AF432A
AF429A
AF430A
HP Rack SeriesHP Rack 10000 G2 Series (Graphite Metallic)
10642 G2 (42U) Rack Cabinet - Pallet
10642 G2 (42U) Rack Cabinet - Shock Pallet
HP 10642G2 1200mm Shock Rack
HP 10647G2 1200mm Shock Rack
NOTE: HP BladeSystem c7000 Enclosure is not supported in a 14U rack
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
/products/quickspecs/12402_div/12402_
(Worldwide)
NOTE: For additional information regarding Rack Cabinets, please see the
following URL: /go/rackandpower
AF001A
AF002A
AF092A
AF094A
HP Rack OptionsKeyboards and Monitors
TFT7600 Rackmount Keyboard Monitor US
HP TFT7600 G2 KVM Console Rackmount Keyboard US Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard UK Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard DE Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard FR Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard IT Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard ES Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard DK Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard NO Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard SE/FI Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard CH Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard PT Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard BE Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard JP Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard RU Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard Intl Monitor
AG052A
AZ870A
AZ871A
AZ872A
AZ873A
AZ874A
AZ875A
AZ876A
AZ877A
AZ878A
AZ879A
AZ880A
AZ881A
AZ882A
AZ883A
AZ884A
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 22
QuickSpecs
Related Options
HP BladeSystem c7000 Enclosure
HP TFT7600 G2 KVM Console Rackmount Keyboard US TAA Monitor
NOTE: For additional information regarding Rack Options, please see the
following URL: /go/rackandpower
HP KVM Switch Options
HP 2x8 Server Console Switch G2
HP 2x16 Server Console Switch G2
USB Interface Adapter - 1 pack
USB Virtual Media Interface Adapter
Serial Interface adapter - 1 Pack with power supply
NOTE: VT100 terminal emulation.
NOTE: Cat5e cables are required to connect Interface Adapters to Consoles
Switches. Cat52 cables can be found at the following URL:
/go/kvm
NOTE For additional information regarding KVM switches, Serial Console
servers, rack mount monitors, keyboards and all related options please see the
following URL: /go/kvm
HP Serial Console Server Options
HP 16 Port Serial Console Server (worldwide)
HP 48 Port Serial Console Server (worldwide)
Serial Adapter, RJ45-DB9 DCE Female, 1 Pack
Serial Adapter, RJ45-DB9 DCE Female, 8 Pack
NOTE: Cat5e cables are required to connect Serial Adapters to Serial Console
Servers. Additional Serial Adapters and Cat5e cables can be found at the
following URL: /go/kvm.
NOTE: For additional information regarding KVM switches, Serial Console
servers, rack mount monitors, keyboards and all related options please see the
following URL: /go/kvm.
Rack Options
HP 10642 G2 Front Door ALL
HP 10636 G2 Front Door ALL
10642 G2 (42U) Side Panels (set of two) (Graphite Metallic)
10636 G2 (36U) Side Panels (set of two) (Graphite Metallic)
10636 G2 Rear Extension Kit
600mm G2 Stabilizer Option Kit (Graphite)
600mm G2, Heavy Duty Stabilizer Option Kit (Graphite)
800mm G2, Heavy Duty Stabilizer Option Kit (Graphite)
NOTE: Supports 10000 G2 Series only.
HP 10000 G2 Rack Grounding Kit
600W 10K G2 Rack Tie Down
NOTE: For additional information regarding Rack Options, please see the
following URL: /hp.
AZ885A
AF616A
AF617A
336047-B21
AF603A
373035-B21
AF101A
AF102A
AF103A
AF110A
AF009A
AF019A
AF054A
AF056A
AF060A
AF062A
AF064A
AF068A
AF074A
AF076A
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 23
QuickSpecs
Related Options
HP BladeSystem c7000 Enclosure
HP Airflow Optimization
HP 10000 Series Rack Airflow Optimization Kit
NOTE: The Airflow Optimization kit is designed to prevent hot and cold air from
mixing thus optimizing the temperature at which the chilled air enters the racked
servers.
NOTE: When configuring racks through Factory Express, a Rack Optimization
kit will automatically ship with the rack. This kit is recommended for all other rack
configurations also.
AF090A
HP Tape BackupThe following options are supported in an Enterprise Backup Solution (EBS)
environment with the HP BladeSystem c-Class enclosure. Please visit:
/go/ebs for complete compatibility details.
HP StorageWorks MSL2024 Tape Library
HP StorageWorks MSL2024 1 LTO-4 Ultrium 1840 SCSI Drive Library
HP StorageWorks MSL2024 1 LTO-4 Ultrium 1840 4GB FC Library
HP StorageWorks MSL2024 1 LTO-3 Ultrium 920 SCSI Drive Library
HP StorageWorks MSL4048 Tape Library
HP StorageWorks MSL4048 2 LTO-4 Ultrium 1840 SCSI Drive Library
HP StorageWorks MSL4048 1 LTO-4 Ultrium 1840 4GB FC Library
HP StorageWorks MSL4048 2 LTO-4 Ultrium 1840 4GB FC Library
HP StorageWorks MSL4048 1 LTO-3 Ultrium 920 SCSI Tape Library
HP StorageWorks MSL4048 2 LTO-3 Ultrium 960 SCSI Drive Library
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information or to create a complete solution; reference current compatibility
information at: /go/ebs.
AJ033A
AJ034A
AH169A
AJ037A
AJ036A
AJ038A
AH171A
AG323A
HP Care Pack ServicesNOTE: HP Care Pack services for the c7000 Enclosure cover the enclosure,
power supplies and fans. HP qualified rack options are covered by these
services when installed within the same rack. HP supported c-Class enclosure
devices including pass thru, Ethernet interconnect and virtual connect modules
are also covered by the c7000 enclosure Care Pack services.
NOTE: SAN/Fabric switches for the HP c-Class BladeSystem are not covered
under the c7000 enclosure Care Packs, SAN/Fabric switches carry separate
Care Packs. SAN/Fabric Switch Care Pack service level support should always
be uplifted to match existing storage or server service level.
Hardware Services On-site Service
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years,
Electronic NOTE: Uplifts the Ethernet devices to the same level of service as the
c-class enclosure
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Support Plus 24
Onsite HW support 24x7, 4hr response and Insight Control for Linux SW
Updates, SW Tech support offsite, onsite at HP's discretion, 24x7 2hr response
time including. HP holidays, Electronic
Onsite HW support 24x7, 4hr response and Insight Control for BladeSystem SW
Updates, SW Tech support offsite, onsite at HP's discretion, 24x7 2hr response
time including. HP holidays, Electronic
UE477E
UE478E
UE479E
UE480E
UK137E
UH322E
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 24
QuickSpecs
Related Options
HP BladeSystem c7000 Enclosure
Installation & Start-up Services
HP BladeSystem c7000 Infrastructure Installation and Startup Service for Blade
Hardware and Insight Control Software, Electronic
HP BladeSystem C7000 Enhanced Network Installation and Startup Service,
Electronic
ProLiant BL c-Class Enclosure and Blade Hardware Installation, Electronic
ProLiant BL c-Class Blade Server Hardware Installation, Electronic
NOTE: For more information, customer/resellers can contact:
/services/bladesystemservices
NOTE: The HP Care Pack service part numbers below covers the HP Brocade
4Gb, 12 Port SAN Switch and Brocade 4/24/ SAN Switch.
Hardware Services On-site Service
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years,
Electronic
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Hardware Installation, Electronic
NOTE: The HP Care Pack service part numbers below covers the Brocade 4/24
SAN Switch Power Pack.
Hardware Services On-site Service
Support Plus
Onsite HW support, 8am-9pm, M-F, 4hr response and SW Tech support offsite,
onsite at HP's discretion, 8am-9pm, M-F 2hr response time excluding HP
holidays, Electronic
Support Plus 24
Onsite HW support 24x7, 4hr response and SW Tech support offsite, onsite at
HP's discretion, 24x7 2hr response time including HP holidays, Electronic
NOTE: The HP Care Pack service part numbers below covers the HP Cisco
MDS 9124e 12 port and 24 port Fabric Switch.
Hardware Services On-site Service
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years,
Electronic
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Hardware Installation, Electronic
Software Installation and StartUp Services
Provides for the Installation and Start-up of HP Insight Rapid Deployment
software, Electronic
NOTE: Provides installation on a Customer supplied server designated as a
Deployment Server. Includes the deployment of a single server. This new server
will be deployed using either one of the pre-configured scripts or an image. In
addition, the service will provide for the capture and storage of the configuration
of the newly deployed server and orientation on product usage. To be delivered
during standard office ours, standard office days.
Provides for the Installation and Start-up of System Insight Manager (Electronic)
Provides for the Installation and Startup of Insight Control for Linux
UE602E
UE603E
UE494E
UE493E
UE436E
UE437E
UE438E
UE439E
U5988E
UE728E
UE729E
UF313E
UF972E
UF973E
UF974E
U5988E
U5683E
UA041E
UF372E
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 25
QuickSpecs
Related Options
HP BladeSystem c7000 Enclosure
Software Operating Environment Care Packs
1 Year Microsoft operating environment software support 24x7 - 10 incidents
1 Year Red Hat operating system software support 24x7 - 10 incidents
1 Year SuSE operating system software support 24x7 - 10 incidents
NOTE: For more information, customer/resellers can contact:
/services/servers
BCS Flexible Care Packs Integrity blade server enclosure
NOTE: HP Care Pack services for the c7000 Enclosure cover the enclosure,
power supplies and fans. HP qualified rack options are covered by these
services when installed within the same rack. HP supported c-Class enclosure
devices including pass thru, Ethernet interconnect and virtual connect modules
are also covered by the c7000 enclosure Care Pack services.
NOTE: SAN/Fabric switches for the HP c-Class BladeSystem are not covered
under the c7000 enclosure Care Packs, SAN/Fabric switches carry separate
Care Packs. SAN/Fabric Switch Care Pack service level support should always
be uplifted to match existing storage or server service level.
Hardware Services On-site Service
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years,
Electronic
NOTE: Uplifts the Ethernet devices to the same level of service as the c-class
enclosure.
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Support Plus
Support Plus Service, 5-Day x 13-Hour Coverage
Support Plus 24
Support Plus 24 Service
Proactive 24 Service - Mission Critical proactive environment 24x7 4hr onsite
HW support
Critical Service - Mission Critical proactive environment 6-Hour Call-to-Repair
onsite HW support
Installation & Start-up Services
HP BladeSystem c7000 Infrastructure Installation and Startup Service for Blade
Hardware and Insight Control Software, Electronic
NOTE: The HP Care Pack service part numbers below covers the HP Brocade
4Gb, 12 Port SAN Switch and Brocade 4/24 SAN Switch.
Hardware Services On-site Service
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years,
Electronic
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Hardware Installation, Electronic
NOTE: The HP Care Pack service part numbers below covers the Brocade 4/24
SAN Switch Power Pack.
Hardware Services On-site Service
Support Plus
U9269E
U3408E
U9936E
HA101A3#6Q6
HA103A3#6Q6
HA104A3#6Q6
HA105A3#6Q6
HA109A3#6Q6
HA110A3#6Q6
HA111A3#6Q6
HA112A3#6Q6
HA114A1#57A
HA101A3#85J
HA103A3#85J
HA104A3#85J
HA105A3#85J
HA113A1#5D2
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 26
QuickSpecs
Related Options
HP BladeSystem c7000 Enclosure
Onsite HW support, 8am-9pm, M-F, 4hr response and SW Tech support offsite,
onsite at HP's discretion, 8am-9pm, M-F 2hr response time excluding HP
holidays, Electronic
Support Plus 24
Onsite HW support 24x7, 4hr response and SW Tech support offsite, onsite at
HP's discretion, 24x7 2hr response time including HP holidays, Electronic
NOTE: The HP Care Pack service part numbers below covers the HP Cisco
MDS 9124e 12 port and 24 port Fabric Switch.
Hardware Services On-site Service
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years,
Electronic
NOTE: Uplifts the Ethernet devices to the same level of service as the c-class
enclosure.
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Hardware Installation, Electronic
NOTE: For more information, customer/resellers can contact:
/services/servers
HA109A3#85K
HA110A3#85K
HA101A3#87L
HA103A3#87L
HA104A3#87L
HA105A3#87L
HA113A1#5D2
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 27
QuickSpecs
Storage
HP BladeSystem c7000 Enclosure
Figure 1Installing a tape blade adjacent to a half-heightFigure 2
server blade.
Installing a tape blade adjacent to a full-height
server blade.
Installing Tape or Storage Blade
DescriptionQuantityPosition
SupportedSupported
Connecting a tape orUp to 8 per HPOdd or Even
storage blade to anBladeSystem c-slots next to
adjacent half-heightClass c7000partner server
server blade (Figure 1)Enclosureblade
Comments
A tape or storage blade supports one partner server
blade, and one partner server blade supports one tape or
storage blade.
Identify the partner server blade to be installed with the
tape or storage. The two blades always occupy a pair of
slots, as follows: 1 & 2, 3 & 4, 5 & 6, 7 & 8, 9 & 10, 11 &
12, 13 & 14, 15 & 16.
If the partner server blade is installed in an odd-
numbered bay, the tape or storage blade is installed in
the adjacent even-numbered bay to the right.
If the partner server blade is installed in an even-
numbered bay, the tape or storage blade is installed in
the adjacent odd-numbered bay to the left.
A tape or storage blade supports one partner server
blade, and one partner server blade supports one tape or
storage blade.
When partnering a tape or storage blade with a full height
server blade, an HP PCI Express Mezzanine Pass-Thru
Card for BladeSystem c-Class (431643-B21) is required.
This card is installed in mezzanine 3 connector in the
server blade.
Identify the partner server blade to be installed with the
tape or storage blade. The two blades always occupy a
pair of slots, as follows: 9 & 10, 11 & 12, 13 & 14, 15 &
16.
The partner server blade is installed in an odd-numbered
bay. The tape or storage blade is installed in the adjacent
even-numbered bay to the right.
Connecting a tape or
storage blade to an
adjacent full-height
server blade (Figure 2)
Up to 4 per HPSlots 10, 12, 14,
BladeSystem c-or 16
Class c7000(lower bays only)
Enclosure
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 28
QuickSpecs
Storage
HP BladeSystem c7000 Enclosure
The tape or storage blade is always located on the lower
row of the enclosure in an even-numbered bay (slots 10,
12, 14 or 16)
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 29
QuickSpecs
Power Specifications
HP BLc7000 Enclosure 2400 Watts Platinum Efficiency Power Supply
Part Number588603-B21
Input Voltage Range (Vrms)200-240
Frequency Range (Nominal) (Hz)50 / 60
Nominal Input Voltage (Vrms)200208
Maximum Rated Output Wattage24502450
Nominal Input Current (A rms)13.913.4
Maximum Rated Input Wattage26922692
Rating (Watts)
Maximum Rated VA (Volt-Amp)27782778
Efficiency (%) at Max. Rated Output9191
Wattage
Power Factor0.980.98
Leakage Current (mA)0.971.01
Maximum Inrush Current (A peak)100100
Maximum Inrush Current duration1010
(mS)
Maximum British Thermal Unit Rating91869186
(BTU-Hr)
HP BladeSystem c7000 Enclosure
220
2450
12.6
2678
2762
91.5
0.98
1.06
100
10
9136
230
2450
12.0
2678
2762
91.5
0.98
1.11
100
10
9136
240
2450
11.4
2663
2747
92
0.98
1.16
100
10
9086
NOTE:
To review maximum system power ratings for facilities planning purposes use the Active Answers Power Calculator which is
available via the online tool located at URL: /go/bladesystem/powercalculator
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 30
QuickSpecs
Technical Specifications
HP BladeSystem c7000 Enclosure
Server Blade and Fan Population Guidelines
Fan bay numbering
Fans must be placed in the following bays
Number of FansFan Bays Used
44, 5, 9, 10
63, 4, 5, 8, 9, 10
81, 2, 4, 5, 6, 7, 9, 10
101, 2, 3, 4, 5, 6, 7, 8, 9, 10
NOTE: For correct operation fans and server blades must be installed in the correct bays. The BladeSystem Onboard
Administrator will ensure that fans and blades are correctly placed before allowing systems to power on.
Half-height server blade bay numbering
1. Device Bay 1
2. Device Bay 2
9. Device Bay 9
10. Device Bay 10
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 31
QuickSpecs
Technical Specifications
HP BladeSystem c7000 Enclosure
3. Device Bay 311. Device Bay 11
4. Device Bay 412. Device Bay 12
5. Device Bay 513. Device Bay 13
6. Device Bay 614. Device Bay 14
7. Device Bay 715. Device Bay 15
8. Device Bay 816. Device Bay 16
NOTE: Half-height servers should be populated from top and bottom from left to right from the front of the enclosure. So the
first two half-height servers would be placed in bays 1 & 9 the second two half-height servers would be placed in bays 2 & 10
and so on until the enclosure is full.
Full-height server blade bay numbering
1. Device Bay 15. Device Bay 5
2. Device Bay 26. Device Bay 6
3. Device Bay 37. Device Bay 7
4. Device Bay 48. Device Bay 8
NOTE: Full-height servers should be populated from left to right.
Mixed Configuration - Full Height and Half-Height Population rules
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 32
QuickSpecs
Technical Specifications
HP BladeSystem c7000 Enclosure
The c7000 enclosure is divided into 4 quadrants by the vertical support metalwork. Within each quadrant a removable
divider is used to support half height devices. To install a full-height blade in any quadrant this divider must be removed. As
a consequence a quadrant can only contain either full-height server blades or half-height server blades.
NOTE: Storage blades and Tape blades can be installed in the same quadrant as both full-height and half-height blades, a
bracket ships with each SB40c/Tape Blade that allows a half-height blade to be mounted on top of the storage blade.
NOTE: The lower tape or storage blade cannot be removed without first removing the upper half height blade.
HP BladeSystem
c7000 Server Blade
Enclosure
DimensionsHeight
Width
Depth
Height
Width
Depth
Unboxed
Shipping
Unboxed
17.4 in (442 mm)
17.6 in (447.04 mm)
32 in (813 mm)
29.88 in (759 mm)
23.88 in (607 mm)
39.88 in (1013 mm)
192 lb (87 kg)
235 lb (106.6 kg)
222 lb (100.7 kg)
265 lb (120.2 kg)
Shipping Dimensions
Single Phase
Enclosure Weight
Three -Phase
Enclosure NA/JPN
Shipping
Weight
Three-Phase EnclosureUnboxed
International Weight
Shipping
DC Input EnclosureUnboxed
Weight
Shipping
Max Enclosure WeightUnboxed
(approximate)
Shipping
Temperature RangeOperating
Non-Operating
Relative HumidityOperating
222 lb (100.7 kg)
265 lb (120.2 kg)
151 lb (68.5 kg)
194 lb (88 kg)
450 lb (204 kg)
493 lb (223.6 kg)
50° to 95° F (10° to 35° C)
-22° to 140° F (-30° to 60° C)
10 to 90% relative humidity (Rh), 28°C
(82.4°F) maximum wet bulb temperature, non-
condensing.
Non-Operating5 to 95% relative humidity (Rh), 38.7°C
(101.7°F)maximum wet bulb temperature,
non-condensing.
NOTE: Operating temperature has an altitude derating of 1.8° F (1° C) per 1,000 ft (304.8 m). No
direct sunlight. Upper operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-
operating limit is 30,000 ft (9,144 m) or 30.3 KPa/4.4 psia. Storage maximum humidity of 95% is
based on a maximum temperature of 113° F (45° C). Altitude maximum for storage is 70 KPa.
PowerInput Requirements -
Single Phase Model
Rated input frequency
2400W PSU
50 to 60 Hz
Rated input voltage
Rated input current
per power supply
Input Requirements -
Three Phase NA/JPN
Model
Rated input voltage
Rated input frequency
Rated input power
per power supply
200 to 208 VAC Line to Line
3-Phase Delta
50 to 60 Hz
200 to 240 VAC
13.9 A at 200 VAC
13.3 A at 208 VAC
12.6 A at 220 VAC
2780 VA
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 33
QuickSpecs
Technical Specifications
2250W PSU
HP BladeSystem c7000 Enclosure
2400W PSU
Input Requirements -
Three Phase
International Model
Rated input voltage
Rated input frequency
2250W PSU
2400W PSU
Max input current per22.6A at 200 VAC
line cord21.8A at 208 VAC
Max input power7836VA Max
per line cord
Max input current per24A at 200 VAC
line cord23.1A at 208 VAC
Max input power8340 VA Max
per line cord
346 VAC to 415 VAC Line to Line
200 VAC to 240 VAC Line to Neutral
3-Phase WYE
50 to 60 Hz
Max input current per11.9 A at 220 VAC
line cord10.9 A at 240VAC
Max input power7836 VA Max
per line cord
Max input current per12.6 A at 220 VAC
line cord11.5 A at 240VAC
Max input power
per line cord
36 to -72 VDC
75A
8340 VA Max
Input Requirements DCRated Input Voltage
Power
Max Input Current per
line cord
Max Input Power per line2700W
Cord
Power CordsSingle PhaseIEC-320 C19-C20 1.22m (6 ft)
3-Phase NA/JPN2 x NEMA L15-30p 2.44m (10 ft)
3-Phase International
-48V DC Power
2 x IEC-309 200/346 V - 240/415 V, 5-Pin, 6h
16A 2.44m (10 ft)
Terminal lug: 45DG 4AWG 1/4 2H
Two-hole lug
45 degree bend
0.25in. (6.4mm) stud hole size
0.63in. (16mm) hole spacing
200 - 240 VAC 2400 W 92% EfficiencyOutput
Specifications
(per power supply)
Acoustic Noise
HP 2400W High
Efficiency Hot-Plug
Power Supply
HP 2250W -48V DC Hot-2250W
Plug Power Supply
Listed are the declared A-Weighted sound power levels (LWAd) and
declared average bystander position A-Weighted sound pressure levels
(LpAm) when the product is operating in a 23°C ambient environment.
Noise emissions were measured in accordance with ISO 7779 (ECMA
74) and declared in accordance with ISO 9296 (ECMA 109).
Idle
LWAd7.1 Bels
LpAm54 dBA
Operating
LWAd7.2 Bels
LpAm54 dBA
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 34
QuickSpecs
Technical Specifications
Option KitsPower Supply Option
Shipping Dimensions
Height
Width
Depth
Weight
Fan Option ShippingHeight
Dimensions
Width
Depth
Weight
BladeSystem OnboardHeight
Administrator Option
Width
Shipping Dimensions
Depth
Weight
HP BladeSystem c7000 Enclosure
8.75 in (223 mm)
8.63 in (219 mm)
35.13 in (892 mm)
8.5 lbs (3.85 kg)
8.75 in (223 mm)
9.75 in (248 mm)
15.88 in (403 mm)
4.0 lbs (1.8 kg)
2.50 in (63.5 mm)
9.88 in (251 mm)
13.50 in (343 mm)
4.0 lbs (1.8 kg)
Environmental-friendlyEnd-of-life
Products andManagement and
ApproachRecycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and
recycling programs in many geographic areas. For trade-in information,
please go to /go/green. To recycle your product,
please go to: /go/green or contact your nearest HP
sales office. Products returned to HP will be recycled, recovered or
disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to
provide treatment information for each product type for use by treatment
facilities. This information (product disassembly instructions) is posted
on the Hewlett Packard web site at: /go/green. These
instructions may be used by recyclers and other WEEE treatment
facilities as well as HP OEM customers who integrate and re-sell HP
equipment.
© Copyright 2010 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation.
Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries.
AMD Opteron™ is a US registered trademark of AMD Corporation.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
DA - 12810 Worldwide QuickSpecs — Version 24 — 10/8/2010Page 35