EPSON TM-H6000IV 产品信息指南说明书-USB迷|专注于互联网分享

2024年10月24日发(作者：裘盼夏)

What’s in 1

. 2

Installing 4

Testing 4

Removing a 5

. 5

Roll paper cover

Control panel

Receipt unit

Manual cutter

Front cover

Power switch

(Power) LED

Error LED

Paper LED

Slip LED

Feed button

Release button

Customer display

Power supply

Drawer kick-out

USB interface

Serial

Ethernet

Parallel

Interface

EPSON TM-H6000IV

What’s in the Box

❏Printer

❏User’s Manual

❏Small thermal paper roll (for operational testing)

❏Power Supply and AC Cable (Energy Star models only)

❏Cable Connector Cover

❏Power Switch cover

❏ERC-32B (slip/drop-in validation ribbon)

❏ERC-43B (endorsement ribbon)

Included with endorsement printer models only.

Accessories

OptionModelPart Number

AC adapter (with AC cable)PS-180C825343

AC adapter (without AC cable)PS-180C825341

AC cableAC CABLE205498100

Interface boardsUB seriessee price sheet

Epson customer display seriesDM-Dsee price sheet

58 mm paper guidePG-58IIC32C814622

Endorsement ribbonERC-43(B)ERC-43(B)

Franker cartridgeEFC-02A43S020479

Printer Specifications

Printing

Print methods:receipt:

thermal line printing

slip (endorsement):

serial impact dot matrix

Receipt Section

Dot density:180 dpi × 180 dpi

(dpi = dots per inch [25.4 mm])

Print width:2.83" (72 mm), 512 dots (3.15" paper)

2.1" (52.5 mm), 360 dots (2.28" paper)

Characters per line:font A: 42, font B: 56 (3.15" paper)

font A: 30, font B: 40 (2.28" paper)

Print direction:unidirectional with friction feed

Print speed:11.81"/sec. (300 mm/sec.) maximum

Paper feed speed:approx. 7.87"/sec. [200 mm/sec.]

(continuous paper feed)

6/12EPSON TM-H6000IV

- 1

EPSON TM-H6000IV

Character sets:alphanumeric: 95 characters;

international: 37 characters;

extended graphics: 128 × 11 pages

(including a space page)

Reliability

Receipt Printer

Print head life:

Mechanism:

Autocutter:

MTBF:

MCBF:

150 million pulses, 150 km

20 million lines

2 million cuts

360,000 hours

96 million lines

Slip/Endorsement Section

Head wire matrix:9-pin vertical; 1/72" wire pitch

Print width: 2.80" (71.2mm) max

font A: 45; font B: 60;

Endorsement:

font A: 25; font B: 33; endorsement: 40

Printing direction:Bidirectional, minimum distance printing

Print speed:Front:

Approx 5.7 lps (40-column, 17.8 cpi

with normal head energizing)

Endorsement:

Approx 4.0 lps (40-column, 21.1 cpi

with normal head energizing)

alphanumeric: 95 characters;

international: 37 characters;

extended graphics: 128 × 11 pages

(including a space page)

Characters per line:Front:

Endorsement Printer

Print head life:

MTBF:

MCBF:

200 million characters

180,000 hours

65 million lines

Safety

EMI:

Safety Standards:

FCC part15B Subpart B Class A

CAN/CSA-CEI/IEC CISPR 22 Class A

Character sets:

Interfaces

Built-in:

Optional:

USB 2.0 Full-speed

serial, parallel, USB, Ethernet, and

wireless

UL60950-1

CAN/CSA C22.2 No.60950-1

(Tested using the PS-180.)

Dimensions

(H × W × D):

Weight:

7.13" 7.32" × 10.94"

(181 mm × 186 mm × 278 mm)

approx. 9.70 lb (4.4 kg)

Media

Roll Paper

Paper type:

Paper size:

thermal roll paper

58mm or 80 mm wide

Dip Switches

Serial InterfaceSlip Paper

Paper type:

Paper size:

Minimum

paper size:

Sheets:

Total thickness:

normal, pressure-sensitive, or carbon

copy paper

2.68 to 9.06" (W) × 2.68 to 11.69" (L)

[68 to 230 mm (W) × 68 to 297 mm (L)]

2.68 × 5.98" (68 × 152 mm)

3 parts maximum

0.0035 to 0.0122" (0.09 to 0.31 mm)

Bank 1

7 and 8

Function

Data reception error

Receive buffer capacity

Handshaking

Word length

Parity check

Parity selection

Transmission speed

Ignored

45 bytes

XON/XOFF

7 bits

Yes

Even

OFF

Prints “?”

4 KB

DTR/DSR

8 bits

Odd

See table below

2 -

EPSON TM-H6000IV6/12

EPSON TM-H6000IV

Transmission speed

4800

9600

19200

38400

Bank 2

Function

Switch 1-7

OFF

Switch 1-8

OFF

Offline or

receive buffer

full

Not connected

Control Panel

LEDs

(Power)

On when the power is on.

Note: Turn off the product before opening any covers.

Handshaking (BUSY)Receive buffer

full

Connected

See table below

3 and 4

5 and 6

Level

Customer display (DM-D)

connection

Print density

Reserved

I/F pin 6 reset

I/F pin 25 reset

Function

Standard

Medium

Dark

Error

Steadily on when the printer is offline. See if a cover is open.

Blinking if there is an error. Turn the printer off for a few

seconds, then turn the printer back on. If still blinking,

contact a dealer or qualified service person.

Paper

Comes on when roll paper is low or out. Flashes when the

product is performing a self-test.

Slip

Blinks when the printer is ready to receive slip paper. Steadily

on during printing of a slip, and blinks again when slip paper

should be removed.

Set to OFF (Do not change.)

Enabled

Switch 2-3

OFF

Disabled

Switch 2-4

OFF

Parallel Interface

Bank 1

3 — 8

Bank 2

Function

Auto line feed

Receive buffer capacity

Reserved

Function

Handshaking (BUSY)

Always enabled

45 bytes

OFF

Always disabled

4 KB

Buttons

Feed

Pressing this button once feeds paper by one line. Holding

this button down feeds paper continuously.

Release

Pressing this button releases slip paper or starts a slip paper

self-test.

Set to OFF (Do not change.)

Receive buffer

full

OFF

Offline or

receive buffer

full

3 and 4

5 — 7

Level

Reserved

Print density

Reserved

I/F pin 31 reset

Function

Standard

Medium

Dark

Set to OFF (Do not change.)

See table below

Set to OFF (Do not change.)

Set to ON (Do not change.)

Switch 2-3

OFF

Switch 2-4

OFF

6/12EPSON TM-H6000IV

- 3

EPSON TM-H6000IV

Loading Paper

Receipt Section

Caution: To avoid injury, do not touch any part of the printer other

than the roll paper when the cover is open.

Note: Do not open the paper roll cover when the printer is printing

or feeding paper. Only use paper that meets specifications, and do

not use rolls that have the paper glued onto the core.

Installing a Ribbon

Note: Be sure to turn on the power before installing the ribbon.

the ribbon and turn the knob on the ribbon in the

direction marked on the ribbon to remove any slack.

the printer on.

the printer’s front cover using the tabs on each side of

the cover.

the old ribbon, if this is one.

the new ribbon until it clicks into place.

sure the printer is not receiving data, then open the roll

paper cover by lifting the two tabs on the roll paper cover

and pushing the cover back.

the used roll paper core, if there is one, and insert

the roll paper in the direction shown below.

the printer’s front cover.

Testing the Printer

out some paper, and close the roll paper cover.

off the extra paper using the manual cutter.

Receipt Section

Follow the steps below to perform a self-test on roll paper:

sure the printer is off and all the covers are closed.

and hold the Feed button and turn on the printer. The

printer prints its status and the Paper LED begins flashing.

continue the self-test, press the Feed button.

The self test is complete when *** completed *** is printed.

Slip Section

When inserting slip paper, be sure that the right side of the

paper is against the right side of the paper guide as shown

below.

Slip Section

Follow the steps below to perform a self-test on roll paper:

sure the printer is off and all the covers are closed.

and hold the Release button and turn on the printer.

the Slip LED begins flashing, insert a slip.

The self test is complete when *** completed *** is printed.

4 -

EPSON TM-H6000IV6/12

EPSON TM-H6000IV

Removing a Paper Jam

Receipt Section

Caution: Do not touch the thermal head, because it can be very hot

after printing. Let it cool before you remove the jammed paper.

USB迷 | 专注于互联网分享

EPSON TM-H6000IV 产品信息指南说明书

与本文相关的文章

评论列表 (0)