Chroma 62000B系列模块化直流电源说明书-USB迷|专注于互联网分享

2024年11月5日发(作者：回河灵)

MODULAR DC POWER SUPPLY

MODEL 62000B SERIES

Chroma's

Power Supplies offer many unique features for

new 62000B series of Modular DC The

are very cost effective with high power density

Modular DC Power Supplies of 62000B

Burn-in

The

and

power

features

and plating/electrolysis

include a N+1 redundancy,

applications.

high have

low

remote ON/OFF and programmable control via

densities, hot-swappable maintenance, such

current

designed

ripple. These instruments

the CAN bus.

power

chargers

inverters,

the LCD panels,

for burn-in

DC-DC

applications

converters,

The

devices.

and many

notebook

other types

computers,

of electronic

battery

module

62000B family offers 5 types of

from

Modern

type of six and three position. The six position

10A

with

ranging

90A, and

from

offers

1V to

two

150V,

mainframe

current

power

incorporated

power factor correction circuitry is

mainframe

power

in 62000B providing an input

modules

can envelop in up to requirements.

factor above

output.

not

This PFC

0.98

correction

to meet the

circuity

IEC

fourteen

The

paralleled

62000B

operation

can

for 9KW

six power

power

sharing

harmonics.

greatly

only reduces

reduce

the

generation

input current draw and

applications.

and

mainframe

CAN bus

control

120KW

easily parallel

for

with

bulk

current

up to

power and

monitoring of the power system using an easy

CAN bus

Optional

control

graphic

of input

allow for

Soft

control

Panels

current

and

to use graphical interface.

USBGPIBAPGRS-485EthernetCAN

Modular DC Power Supply

MODEL 62000B SERIES

Key Features :

■ Voltage range: 1 ~ 150V

■ Current range: Up to 2000A (System)

■ Power range up to 1.5KW per module

up to 120KW per system

■ High Power Density

(464 mW / cm

= 7.13 W/In

)

■ N+1 Redundancy

■ Hot-swappable

■ Ideal for Burn-in & Plating

■ Remote Sense

■ Remote ON / OFF

■ CAN Bus Control

■ DC OK Signal Output

Equipped with the functionality of N+1 redundancy and hot-swap,

the 62000B Series of modular DC power supplies are most

applicable for 24 hours non-stop applications such as the SMD

products like DC converters, LCD backlight inverters and routers.

plating production lines, as well as product life burn-in test for IT

For continuous operation applications the modular hot-swap

design allows engineers to replace the failure unit on-site without

shutting down the entire system.

The 62000B modular power supplies are capable of providing high power output up to 120KW/2000A

with minimal specification degradation via CSU(Control & Supervisor Unit). Each chassis is designed

to accommodate a maximum of 9KW and include current sharing capability to ensure system stability.

In addition, for convenient control of even large power systems, a CSU is provided to set and display

output and protection circuits via a standard CAN bus communication protocol.

Available Power Ratings

Current Rating

Voltage Rating

15V

30V

60V

80V

150V

Paralleled unit

of mainframe

Power Rating

9KW

540A

300A

150A

108A

60A

18KW

1080A

600A

300A

216A

120A

27KW

1620A

900A

450A

324A

180A

36KW

2160A

1200A

600A

432A

240A

45KW

2700A

1500A

750A

540A

300A

Note: Contact the factory for more information on customization of high power system ( >2000A).

A620007 CSU Key Features:

■ Stand-alone controller for paralleled 62000B DC power for bulk power

■ Digital encoder knobs and function keys

■ Simultaneous display of output voltage and current

■ Standard Analog programmable interface

■ Standard CAN Bus

■ Optional Ethernet interface

■ User define I/O interface

A620007 Control & Supervisor Unit

Controller Area Network (CAN) is a multicast shared, differential serial bus standard. CAN was specifically designed to be robust

in electromagnetically noisy environments and can utilize a differential balanced line like RS-485. Introduced by Bosch in 1986 for

in-vehicle networks in cars, it is used in myriad applications including factory automation, building automation, aircraft and aerospace

as well as in cars, trucks and buses. CAN bus replaced bulky wiring harnesses with a two-wire differential cable. CAN provides

services at layers 1 and 2 of the OSI model and uses a broadcast method for placing frames on the wire. CAN provides low-speed,

fault-tolerant transmission of 125 Kbps up to 40 meters, which can function over one wire if a short occurs. Transmission without fault

tolerance is provided up to 1 Mbps and 40 meters, and distances up to 1 km are achieved with bit rates of 50 Kbps. Bit rates up to 1

Mbit/s are possible at network lengths below 40m. Decreasing the bit rate allows longer network distances (e.g. 125 kbit/s at 500 m).

Model 62000B Series

11121314

FRONT PANEL

1. OUTPUT ENABLED LED

2. FAULT INDICATOR

3. OUTPUT VOLTAGE READOUT

4. VOLTAGE TRIMMER (1V-100%)

5. OUTPUT CURRENT READOUT

6. CURRENT TRIMMER (1A-100%)

7. OUTPUT ENABLE/DISABLE SWITCH

REAR PANEL

8. CURRENT SHARING CONNECTOR (FOR MAINFRAME)

9. REMOTE SENSE CONNECTOR

10. I/O CONNECTOR (INCLUDES REMOTE ON/OFF, DC OK, AUX POWER)

11. CAN DIP ADDRESS SWITCH

12. CAN BUS COMMUNICATIONS PORT (OPTIONAL)

13. OUTPUT TERMINALS

14. AC INPUT TERMINAL BLOCK

Model A620007

68917181926

FRONT PANEL

1. OVP INDICATOR

2. VOLTAGE READOUT

3. OTP INDICATOR

4. AC-FAULT INDICATOR

5. CURRENT READOUT

6. MODULE ERROR INDICATOR

7. CV MODE INDICATOR

8. CC MODE INDICATOR

9. ON/OFF ENABLE/DISABLE

10. V-SET BUTTON

11. I-SET BUTTON

12. OVP-SET BUTTON

13. I-MAX LIMITED SETTING

14. ROTARY

15. AC ON/OFF SWITCH

REAR PANEL

16. AC INPUT

17. ETHERNET

18. CAN ADDRESS SET

19. DIP SWITCHING FOR

SYSTEM SETTING

INTERFACE INPUT

20. I/O CONTROL

21. I/O CONTROL INTERFACE OUTPUT

22. TERMINAL-RESISTANCE(CAN)

23. CAN BUS to PC

24. CAN BUS to MAINFRAME

25. EXT-V&I SENSE INPUT

26. APG CONTROL

SOFTPANEL

Main Operation MenuProgram Sequence FunctionBasic Control Function for 30 Channels

Type A - Control with CSU : User can control via APG, CAN Bus/ Ethernet, and front panel manual control for paralleled operation.

Front Panel ControlAPG

CAN or Ethernet

CAN Bus

Output

CAN Bus

Parallel Output

DUT

Output

Type B - Control without CSU : User can only control via CAN Bus for paralleled operation.

Note: The SoftPanel can control four mainframes for paralleled operation.

CAN Bus

Output

CAN Bus

Parallel Output

DUT

Output

Type C - Control without CSU or PC : User can only control via remote on/off signal for paralleled operation.

Note 1 : User can NOT adjust the output voltage when parallel the output.

Note 2 : The output voltage will fixed in factory default voltage.

Note 3 : If need to adjust the output voltage, please adjust when stand alone.

Note 4 : Time delay from output enable until output stable: 10s max.

Remote ON/OFF signal → DRY CONTACT〔Closed = enabled ; Open = disable〕

Output

Parallel Output

DUT

Output

SPECIFICATIONS

Model

Electrical Specifications

Output Ratings

Output Power

Output Voltage

Output Current

Line Regulation

Load Regulation *1

Programming Accuracy

Measurement Accuracy

Output Noise (20MHz)

Voltage Noise (P-P)

Voltage Ripple (rms)

Current Ripple (rms)

Efficiency

Turn on over shoot voltage *2

Transient Response Time *3

AC Input Voltage

Six Position Mainframe

62015B-15-90

1350W

1~15V

1~90A

62015B-30-50

1500W

1~30V

1~50A

62015B-60-25

1500W

1~60V

1~25A

0.1% FS

1% FS

62015B-80-18

1440W

1~80V

1~18A

62015B-150-10

1500W

1~150V

1~10A

100mV

30mV

0.9A

> 87% @ full load

100mV

30mV

0.5A

200mV200mV

50mV50mV

0.25A0.18A

> 88% @ full load

5% of nominal output

< 5 ms

400mV

100mV

0.1A

All specifications are subject to change without notice. Please visit our website for the most up to date specifications.

Note*1 : For 50% step load variation with remote sense at maximum output voltage

Note*2 : based on rise time of 100ms

Note*3 : Time for the output voltage to recover within 1% of its rated for a load changed of 25%

Note*4 : Six Position Mainframe through CAN

Three Position Mainframe

Input Power Factor

Protection Function

OVPAutomatically shuts down at 115% of set value

Adjustment Range1~16V1~31V1~65V1~83V1~155V

OCPCurrent limit (0 ~ 100%) / OCP Shutdown at 115% of F.S.

OTPAutomatically shuts down if internal limit is reached

I/O Signal

Remote ON/OFF (I/P)Dry contact (closed = enabled), vice versa

AUX Voltage4 ~ 24V / 0.5A at mainframe (by trimmer adjust voltage)

DC OK Signal Type (O/P)Dry contact (closed = enabled) (Error : OVP / OCP / OTP / AC Fault)

Programming Response Time *4 (Typical)

Rise Time (Full Load)For a programmed 5% to 95% step in output voltage : 100ms

Rise Time (No Load)For a programmed 5% to 95% step in output voltage : 100ms

Fall Time (Full Load)For a programmed 95% to 5% step in output voltage : 40ms

Fall Time (No Load)For a programmed 95% to 5% step in output voltage : 5s

Vout SettingCAN Bus send command to DC module receiver : 1s

Measurement V & IUnder CAN command using fetch : 100ms

Delay TimeFor output ON/OFF enable and disable (under CAN command) : 5s(Single Mainframe)

General Specifications

Remote Sensing3V max. line loss compensation

Parallel OperationCurrent Sharing (

5%)

Operating Temperature0 ~ 50

℃

Humidity Range0 ~ 90% RH. Non-condensing

Remote InterfaceCAN Bus (optional)

Safety & EMCCE

Mainframe : 175.6 x 443.9 x 466.2 mm / 6.91 x 17.48 x 18.35 inch (62000B-6-1)

Dimension (H x W x D)

Mainframe : 175.6 x 239.9 x 466.2 mm / 6.91 x 9.44 x 18.35 inch (62000B-3-1)

Module : 138.5 x 67.5 x 377.5 mm / 5.45 x 2.66 x 14.86 inch

Mainframe : 14 Kg / 30.8 lbs (62000B-6-1)

Weight

Mainframe : 8 Kg / 17.6 lbs (62000B-3-1)

Module : 4 Kg / 8.8 lbs

187 ~ 250 Vac (3 Phase 4 Wire,

Connection ) or 323 ~ 437 Vac (3 Phase 5 Wire, Y Connection) /

45 ~ 65 Hz

187 to 250 Vac (single phase) / 45 ~ 65 Hz

> 0.98@ full load

SPECIFICATIONS

A620007 Control & Supervisor Unit

Output voltage setting (V set + Rotary)

Output current limit setting (I set + Rotary)

Over voltage protection setting (OVP_SET) (Default : 115% Vmax.)

Output ON/OFF

OCP selection : CC mode or Shutdown (By Dip switch selection at rear panel)

Max. output current setting (I max )

Output voltage display (7 segment LED)

Output current display (7 segment LED)

Operating mode indicator : CV or CC

Output ON/OFF indicator

Max. output current display (I max button)

CSU : Over voltage protection

CSU : Over temperature protection

AC fault alarm

Power module fault alarm

Setting Item

Measurement Display Item

Alarm Indicator Item

Remote Control Interface

CAN Bus

Ethernet

Analog Programming Interface

(Standard)

Remote Output ON/OFF

Output ON/OFF Indicator

CV or CC mode Indicator

OTP Indicator

System Fault Indicator

I/O Control Interface

I/P Definition

Pin 1 & 2

Pin 3 & 4

Pin 5 & 6

Pin 7~20

O/P Definition

Pin 1 & 2

Pin 3~20

AC Input Voltage

Dimension

Standard

Optional

Setting voltage (A/I) : 0-10Vdc or 0-1 mA of FS (Resolution : 12 bits, Accuracy : 1% FS)

Setting current (A/I) : 0-10Vdc or 0-1 mA of FS (Resolution : 12 bits, Accuracy : 1% FS)

Monitor voltage (A/O) : 0-10V of FS (Resolution : 12 bits, Accuracy : 1% FS)

Monitor current (A/O) : 0-10V of FS (Resolution : 12 bits, Accuracy : 1% FS)

Dry contact

Active High

TTL Level High=CV mode ; TTL Level Low=CC mode

Active High

I/O : I/P=10 , O/P=10

Temperature sensor for bulk power system rack A (Active : open / default : short)

Temperature sensor for bulk power system rack B (Active : open / default : short)

Emergency stop for bulk power system

Reserved

OVP

Reserved

Single phase 187-253VAC

High(2U) x width(19")

All specifications are subject to change without notice. Please visit our website for the most up to date specifications.

ORDERING INFORMATION

62000B-3-1 : Three Position 62000B Mainframe

62000B-6-1 : Six Position 62000B Mainframe

62015B-15-90 : DC Power Supply Module, 15V/90A/1350W

62015B-30-50 : DC Power Supply Module, 30V/50A/1500W

62015B-60-25 : DC Power Supply Module, 60V/25A/1500W

62015B-80-18 : DC Power Supply Module, 80V/18A/1440W

62015B-150-10 : DC Power Supply Module, 150V/10A/1500W

A620007 : Control & Supervisor Unit

A620008 : CAN Bus Interface for mainframe

A620010 : Rack Mounting Kit for mainframe

A620011 : Ethernet Interface for CSU

A620012 : AD-Link PCI 7841 CAN Bus Card

A620013 : 19" Rack (23U) for 62000B Series

A620014 : 19" Rack (41U) for 62000B Series

A620016 : Rack Mounting Kit for CSU

A620017 : Softpanel for 62000B Series

A620018 : NI USB-8473 high-speed USB to CAN interface

A620019 : USB Interface Control Box for mainframe & CSU

A620020 : GPIB Interface Control Box for mainframe & CSU

*A620021 : APG Interface Control Box for mainframe

*A620022 : RS-485 Interface Control Box mainframe & CSU

*Call for availability

Developed and Manufactured by :

CHROMA ATE INC.

致茂電子股份有限公司

HEADQUARTERS

No. 66, Hwa-Ya 1st Rd.,

Hwa-Ya Technology Park,

Kuei-Shan Hsiang,33383

Taoyuan County, Taiwan

Tel: +886-3-327-9999

Fax: +886-3-327-8898

Distributed by:

JAPAN

CHROMA JAPAN CORP.

NARA Building 11F 2-2-8

Shinyokohama, Kouhokuku,

Yokohama-shi, Kanagawa,

222-0033 Japan

Tel: +81-45-470-2285

Fax: +81-45-470-2287

U.S.A.

CHROMA SYSTEMS

SOLUTIONS, INC.

25612 Commercentre Drive,

Lake Forest, CA 92630-8830

Tel: +1-949-600-6400

Fax: +1-949-600-6401

Toll Free: +1-866-600-6050

E-mail:*******************

EUROPE

CHROMA ATE EUROPE B.V.

Morsestraat 32, 6716 AH Ede,

The Netherlands

Tel: +31-318-648282

Fax: +31-318-648288

E-mail:******************

Worldwide Distribution and Service Network

62000B-E-200908-PDF

CHINA

CHROMA ELECTRONICS

(SHENZHEN) CO., LTD.

8F, No.4, Nanyou Tian An

Industrial Estate, Shenzhen,

China PC: 518052

Tel: +86-755-2664-4598

Fax: +86-755-2641-9620