正点原子Imx6ull（Mini）开发板设置静态IP
启动开发板
编辑/etc/network/interfaces文件。
打开终端输入：
vi /etc/network/interfaces//可以看到如下内容
# Wireless interfaces
iface wlan0 inet dhcpwireless_mode managedwireless_essid anywpa-driver wextwpa-conf /etc/wpa_supplicant.conf
iface atml0 inet dhcp
# Wired or wireless interfaces
auto eth0
iface eth0 inet dhcp
iface eth0 inet static
iface eth1 inet dhcp
# Ethernet/RNDIS gadget (g_ether)
# ... or on host side, usbnet and random hwaddr
iface usb0 inet staticaddress 192.168.7.2netmask 255.255.255.0network 192.168.7.0gateway 192.168.7.1接着注释掉eth0
在后面添加如下
iface eth0 inet static //静态IP
address 192.168.5.9 //开发板IP
netmask 255.255.255.0 //子网掩码完整如下
# The loopback interface
auto lo
iface lo inet loopback
# Wireless interfaces
iface wlan0 inet dhcpwireless_mode managedwireless_essid anywpa-driver wextwpa-conf /etc/wpa_supplicant.conf
iface atml0 inet dhcp
# Wired or wireless interfaces
auto eth0
#iface eth0 inet dhcp //注释掉
iface eth0 inet static
address 192.168.5.9 //添加的IP
netmask 255.255.255.0
iface eth1 inet dhcp
# Ethernet/RNDIS gadget (g_ether)
# ... or on host side, usbnet and random hwaddr
iface usb0 inet staticaddress 192.168.7.2netmask 255.255.255.0network 192.168.7.0gateway 192.168.7.1
然后设置开机自启动，打开终端输入：
vi /etc/init.d/rc在文件最后添加如下内容
ifconfig eth0 192.168.5.9 netmask 255.255.255.0
route add default gw 192.168.5.1重启开发板就可以了。
正点原子Imx6ull（Mini）开发板设置静态IP
启动开发板
编辑/etc/network/interfaces文件。
打开终端输入：
vi /etc/network/interfaces//可以看到如下内容
# Wireless interfaces
iface wlan0 inet dhcpwireless_mode managedwireless_essid anywpa-driver wextwpa-conf /etc/wpa_supplicant.conf
iface atml0 inet dhcp
# Wired or wireless interfaces
auto eth0
iface eth0 inet dhcp
iface eth0 inet static
iface eth1 inet dhcp
# Ethernet/RNDIS gadget (g_ether)
# ... or on host side, usbnet and random hwaddr
iface usb0 inet staticaddress 192.168.7.2netmask 255.255.255.0network 192.168.7.0gateway 192.168.7.1接着注释掉eth0
在后面添加如下
iface eth0 inet static //静态IP
address 192.168.5.9 //开发板IP
netmask 255.255.255.0 //子网掩码完整如下
# The loopback interface
auto lo
iface lo inet loopback
# Wireless interfaces
iface wlan0 inet dhcpwireless_mode managedwireless_essid anywpa-driver wextwpa-conf /etc/wpa_supplicant.conf
iface atml0 inet dhcp
# Wired or wireless interfaces
auto eth0
#iface eth0 inet dhcp //注释掉
iface eth0 inet static
address 192.168.5.9 //添加的IP
netmask 255.255.255.0
iface eth1 inet dhcp
# Ethernet/RNDIS gadget (g_ether)
# ... or on host side, usbnet and random hwaddr
iface usb0 inet staticaddress 192.168.7.2netmask 255.255.255.0network 192.168.7.0gateway 192.168.7.1
然后设置开机自启动，打开终端输入：
vi /etc/init.d/rc在文件最后添加如下内容
ifconfig eth0 192.168.5.9 netmask 255.255.255.0
route add default gw 192.168.5.1重启开发板就可以了。