2023年12月20日发(作者：祖清芬)
Memory Module SpecificationsKHX6400D2/1G1GB 128M x 64-Bit PC2-6400CL5 240-Pin DIMMSPECIFICATIONSClock Cycle Time (tCK) CL=5
Row Cycle Time (tRC)
Refresh to Active/Refresh
Command Time (tRFC)Row Active Time (tRAS)
Single Power Supply of
Power
UL Rating
Operating Temperature
Storage Temperature
3ns (min.) / 8ns (max.)54ns (min.)105ns
39ns (min.) / 70,000ns (max.)+1.8V (+/- .1V)1.922 W (operating)94 V - 00° C to 55° C-55° C to +125° CDESCRIPTIONThis document describes Kingston’s 128M x 64-bit 1GB
(1024MB) DDR2-800 CL5 SDRAM (Synchronous DRAM)
memory module, based on sixteen 64M x 8-bit DDR2 FBGA
components. This module has been tested to run at DDR2
800MHz at low latency timing of 5-5-5-15 at 2.0V. The SPD
is programmed to JEDEC standard latency 667Mhz timing
of 5-5-5-15 at 1.8V. This 240-pin DIMM uses gold contact
fingers and requires +1.8V. The electrical and mechanical
specifications are as follows:FEATURES• Power supply : Vdd: 1.8V ± 0.1V, Vddq: 1.8V ± 0.1V• Double-data-rate architecture; two data transfers per
clock cycle• Bidirectional data strobe(DQS)• Differential clock inputs(CK and CK)• DLL aligns DQ and DQS transition with CK transition• Programmable Read latency 5 (clock)• Burst Length: 4, 8 (Interleave/nibble sequential)• Programmable Burst type (sequential & interleave)• Timing Reference: 5-5-5-15 at +1.8V / 5-5-5-15 at +2.0V• Edge aligned data output, center aligned data input• Auto & Self refresh, 7.8us refresh interval (8K/64ms refresh)• Serial presence detect with EEPROM• High Performance Heat Spreader• PCB : Height 1.180” (30.00mm), double sided componentContinued >>ument No. 4804264-001.E00 07/18/11 Page 1
continuedHyperXMODULE DIMENSIONS:FOR MORE INFORMATION, GO TO Kingston products are tested to meet our published specifications. Some motherboards or system configurations may not operate at
the published HyperX memory speeds and timing settings. Kingston does not recommend that any user attempt to run their computers
faster than the published speed. Overclocking or modifying your system timing may result in damage to computer ument No. 4804264-001.E00 07/18/11 Page 2
2023年12月20日发(作者：祖清芬)
Memory Module SpecificationsKHX6400D2/1G1GB 128M x 64-Bit PC2-6400CL5 240-Pin DIMMSPECIFICATIONSClock Cycle Time (tCK) CL=5
Row Cycle Time (tRC)
Refresh to Active/Refresh
Command Time (tRFC)Row Active Time (tRAS)
Single Power Supply of
Power
UL Rating
Operating Temperature
Storage Temperature
3ns (min.) / 8ns (max.)54ns (min.)105ns
39ns (min.) / 70,000ns (max.)+1.8V (+/- .1V)1.922 W (operating)94 V - 00° C to 55° C-55° C to +125° CDESCRIPTIONThis document describes Kingston’s 128M x 64-bit 1GB
(1024MB) DDR2-800 CL5 SDRAM (Synchronous DRAM)
memory module, based on sixteen 64M x 8-bit DDR2 FBGA
components. This module has been tested to run at DDR2
800MHz at low latency timing of 5-5-5-15 at 2.0V. The SPD
is programmed to JEDEC standard latency 667Mhz timing
of 5-5-5-15 at 1.8V. This 240-pin DIMM uses gold contact
fingers and requires +1.8V. The electrical and mechanical
specifications are as follows:FEATURES• Power supply : Vdd: 1.8V ± 0.1V, Vddq: 1.8V ± 0.1V• Double-data-rate architecture; two data transfers per
clock cycle• Bidirectional data strobe(DQS)• Differential clock inputs(CK and CK)• DLL aligns DQ and DQS transition with CK transition• Programmable Read latency 5 (clock)• Burst Length: 4, 8 (Interleave/nibble sequential)• Programmable Burst type (sequential & interleave)• Timing Reference: 5-5-5-15 at +1.8V / 5-5-5-15 at +2.0V• Edge aligned data output, center aligned data input• Auto & Self refresh, 7.8us refresh interval (8K/64ms refresh)• Serial presence detect with EEPROM• High Performance Heat Spreader• PCB : Height 1.180” (30.00mm), double sided componentContinued >>ument No. 4804264-001.E00 07/18/11 Page 1
continuedHyperXMODULE DIMENSIONS:FOR MORE INFORMATION, GO TO Kingston products are tested to meet our published specifications. Some motherboards or system configurations may not operate at
the published HyperX memory speeds and timing settings. Kingston does not recommend that any user attempt to run their computers
faster than the published speed. Overclocking or modifying your system timing may result in damage to computer ument No. 4804264-001.E00 07/18/11 Page 2