2024年3月18日发(作者：业书白)
TESLA
MOTORS
STANDARD
Material Specification: Electrodeposited Zinc-Based Anti-Corrosion Coatings
TM-0009F-M
Electrodeposited Zinc-Based
Anti-Corrosion Coatings
Fasteners, Sheet, Plate
Proprietary and Confidential
Prepared by
Approved by
Alec Pezeshkian
Benjamin Zabik
Printed copies are uncontrolled. Controlled documents reside electronically. Individuals in possession of an uncontrolled copy are
responsible for ensuring that they are using the latest revision of this document.
© 2012 Tesla Motors, Inc. Proprietary and confidential.
Print Date: 12/3/2012 1 of 8
TESLA
MOTORS
STANDARD
Material Specification: Electrodeposited Zinc-Based Anti-Corrosion Coatings
1 Scope
This specification establishes standards of quality, performance and delivery condition for zinc and
zinc-alloy anti-corrosion coatings applied to vehicle components by electrodeposition. Coated
components may also possess any of a number of secondary surface treatments intended to
confer lubrication, alter tribological characteristics, seal the basecoat or provide color. This
specification encompasses a variety of zinc or zinc-alloy basecoat chemistries, delineated as
grades below.
The materials specified herein are suitable for interior and exterior applications, per the guidelines
below. Common substrates include internally- or externally-threaded ferrous fasteners and non-
threaded ferrous parts requiring protection in corrosive environments. Zinc- or zinc-alloy-plated
parts should not be used in conjunction with polyamide (nylon) 6 or 6,6. Coatings specified herein
are not recommended for components of tensile strength greater than 1000 MPa.
Based on application, each specified coating must meet the affiliated criteria agreed upon by Tesla
Motors and its suppliers. Deviations from the requirements cited herein must be agreed upon by
Tesla Motors and the appropriate supplier.
2 References
ASTM B117
ASTM D543
ASTM D610
ISO 554
ISO 1463
ISO 2177
ISO 2178
ISO 2819
ISO 3497
ISO 4042
ISO 9227
ISO 10683
ISO 16047
ISO 17025
SAE J2334
Printed copies are uncontrolled. Controlled documents reside electronically. Individuals in possession of an uncontrolled copy are
responsible for ensuring that they are using the latest revision of this document.
© 2012 Tesla Motors, Inc. Proprietary and confidential.
Print Date: 12/3/2012 2 of 8
2024年3月18日发(作者：业书白)
TESLA
MOTORS
STANDARD
Material Specification: Electrodeposited Zinc-Based Anti-Corrosion Coatings
TM-0009F-M
Electrodeposited Zinc-Based
Anti-Corrosion Coatings
Fasteners, Sheet, Plate
Proprietary and Confidential
Prepared by
Approved by
Alec Pezeshkian
Benjamin Zabik
Printed copies are uncontrolled. Controlled documents reside electronically. Individuals in possession of an uncontrolled copy are
responsible for ensuring that they are using the latest revision of this document.
© 2012 Tesla Motors, Inc. Proprietary and confidential.
Print Date: 12/3/2012 1 of 8
TESLA
MOTORS
STANDARD
Material Specification: Electrodeposited Zinc-Based Anti-Corrosion Coatings
1 Scope
This specification establishes standards of quality, performance and delivery condition for zinc and
zinc-alloy anti-corrosion coatings applied to vehicle components by electrodeposition. Coated
components may also possess any of a number of secondary surface treatments intended to
confer lubrication, alter tribological characteristics, seal the basecoat or provide color. This
specification encompasses a variety of zinc or zinc-alloy basecoat chemistries, delineated as
grades below.
The materials specified herein are suitable for interior and exterior applications, per the guidelines
below. Common substrates include internally- or externally-threaded ferrous fasteners and non-
threaded ferrous parts requiring protection in corrosive environments. Zinc- or zinc-alloy-plated
parts should not be used in conjunction with polyamide (nylon) 6 or 6,6. Coatings specified herein
are not recommended for components of tensile strength greater than 1000 MPa.
Based on application, each specified coating must meet the affiliated criteria agreed upon by Tesla
Motors and its suppliers. Deviations from the requirements cited herein must be agreed upon by
Tesla Motors and the appropriate supplier.
2 References
ASTM B117
ASTM D543
ASTM D610
ISO 554
ISO 1463
ISO 2177
ISO 2178
ISO 2819
ISO 3497
ISO 4042
ISO 9227
ISO 10683
ISO 16047
ISO 17025
SAE J2334
Printed copies are uncontrolled. Controlled documents reside electronically. Individuals in possession of an uncontrolled copy are
responsible for ensuring that they are using the latest revision of this document.
© 2012 Tesla Motors, Inc. Proprietary and confidential.
Print Date: 12/3/2012 2 of 8