2024年10月28日发(作者：斯永康)
Cat 950M
®
Wheel Loader
The new 950M Wheel Loader has an ACERT™ engine equipped with a combination of proven electronic, fuel, and air components.
Applying proven technologies systematically and strategically lets us meet our customers’ high expectations for productivity, fuel
effi ciency, reliability and service life. Deep system integration results in reduced emissions, improved performance and improved
fuel economy without interrupting machine performance making it seamless to operators. Optional confi gurations are available.**
RELIABILITY, PRODUCTIVITY AND FUEL EFFICIENCY
• 10% more fuel effi cient than K Series*
• Up to 25% more effi cient than H Series*
EASE OF OPERATION
Best-in-class Operator Environment
• Optimized all-around visibility
• Steering wheel (E-H joystick steering option)
• Touch screen multifunction color display with integrated controls
and rearview camera
• Stair-like ingress and egress
• New wider door and increased glass area
• Seat-mounted fi ngertip electro-hydraulic implement controls
• Large convex rearview mirrors with integrated spot mirror
• Remote door opening (option)
• Automatic climate control
• Viscous cab mounts
• Low operator sound levels
Linkage and Work Tools
• Performance Series buckets and range of work tools
• Optimized Z-bar with best-in-class visibility
• –0°/+5° parallelism
• Increased tilt capacity at height, equal to payload
• Fusion™ « zero-offset » coupler (option)
Engine and Aftertreatment Advancements
• Cat
®
C7.1 ACERT
• Meets U.S. EPA Tier 3/EU Stage IIIA equivalent emissions standards
• Productive Economy Mode
Transmission Advancements
• 5-speed powershift transmission with single clutch speed shifts
and torque based down shifts
• Lock up clutch torque converter with lock-to-lock shifting
• Split fl ow oil system and multi-viscosity oil
Advanced Technology with Cat Connect
• Link technologies, like Product Link™ to monitor equipment and
manage production using online VisionLink
®
software
• Payload technologies, like Cat Production Measurement (option)
to measure payloads and optimize productivity
• Detect technologies, like the rear vision camera to keep people safe
and help the operator work more productively
Axle Advancements
• On-the-go disc-type front differential locks
(front and rear fully automatic option)
• Caliper disc parking brake
• Bevel gear shrouds
SERVICE ACCESS
• One-piece tilting hood with side and rear doors
• Centralized service centers for hydraulic and electrical components
• Windshield cleaning platform and harness tie-off
* Fuel effi ciency is measured in mass of material moved per volume of fuel
burned. Average effi ciency improvement as tested and analyzed for an
average composite cycle and stand confi guration with variations per
comparable model with and without economy mode active. Factors infl uence
result variation such as, but not limited to, machine confi guration, operator
technique, machine application, climate, etc.
** Optional confi guration and equipment may vary from region to region.
Consult your Caterpillar representative for further details.
Next Generation Hydraulic Systems
• Next generation main valve
• Next generation ride control system with dual accumulators
• Next generation implement pump with increased displacement
• Full fl ow and kidney loop fi ltration
• Load-sensing hydraulics with simultaneous hydraulic functions
• 3rd and 4th function (option)
Cat
®
950M Wheel Loader
Engine Model
Max Gross Power @ 2,000 rpm – SAE J1995
Max Gross Power @ 2,000 rpm – ISO 14396
Max Gross Power @ 2,000 rpm – ISO 14396 (metric)
Max Net Power @ 2,000 rpm – SAE J1349
Max Net Power @ 2,000 rpm – ISO 9249
Max Net Power @ 2,000 rpm – ISO 9249 (metric)
Peak Gross Torque (1,400 rpm) – SAE J1995
Peak Gross Torque (1,400 rpm) – ISO 14396
Maximum Net Torque (1,400 rpm)
Displacement
Cat C7.1 ACERT
196 kW263 hp
195 kW261 hp
265 hp
185 kW248 hp
185 kW248 hp
252 hp
1053 N·m777 lbf-ft
1050 N·m774 lbf-ft
984 N·m726 lbf-ft
7.01 L428 in3
Static Tipping Load – Full 40° Turn –
with Tire Defl ection
Static Tipping Load – Full 40° Turn –
No Tire Defl ection
Breakout Force
11 005 kg
11 760 kg
181 kN
24,262 lb
25,926 lb
40,690 lbf
• For a machine confi guration as defi ned under “Weight.”
• Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires
2% verifi cation between calculations and testing.
Fuel Tank
Cooling System
Crankcase
Transmission
Differentials and Final Drives – Front
Differentials and Final Drives – Rear
Hydraulic Tank
275 L
59 L
22 L
43 L
43 L
43 L
125 L
72.6 gal
15.6 gal
5.8 gal
11.4 gal
11.4 gal
11.4 gal
33.0 gal
Operating Weight19 214 kg42,360 lb
• Weight based on a machine confi guration with Michelin 23.5R25 XHA2
L3 radial tires, full fl uids, operator, standard counterweight, cold start,
roading fenders, Product Link, manual diff lock/open axles (front/rear),
power train guard, secondary steering, sound suppression and a 3.1 m3
(4.1 yd3) general purpose bucket with BOCE.
Implement Pump Type
Implement System:
Maximum Pump Output (2,150 rpm)
Maximum Operating Pressure
Hydraulic Cycle Time – Total
Variable Axial Piston
286 L/min76 gal/min
29 300 kPa4,250 psi
9.1 Seconds
Bucket Range2.5-9.2 m³3.3-12.0 yd³
Forward 16.9 km/h4.3 mph
Forward 212 km/h7.5 mph
Forward 319.3 km/h12.0 mph
Forward 425.7 km/h16.0 mph
Forward 539.5 km/h24.5 mph
Reverse 16.9 km/h4.3 mph
Reverse 212 km/h7.5 mph
Reverse 325.7 km/h16.0 mph
• Maximum travel speed in standard vehicle with empty bucket and
standard L3 tires with 787 mm (31 in) roll radius.
Standard Lift
Height to Top of Hood2697 mm8'10"
High Lift
2697 mm8'10"
Height to Top of Exhaust Pipe3413 mm11'2"3413 mm11'2"
Height to Top of ROPS3446 mm11'4"3446 mm11'4"
Ground Clearance367 mm 1'2"367 mm1'2"
Center Line of Rear Axle to Edge
1942 mm6'4"2071 mm6'10"
of Counterweight
Center Line of Rear Axle to Hitch1675 mm5'6"1675 mm5'6"
Wheelbase3350 mm11'0"3350 mm11'0"
Overall Length (without bucket)6906 mm22'8"7488 mm24'7"
Hinge Pin Height at Carry Height647 mm2'1"782 mm2'7"
Hinge Pin Height at Maximum Lift4027 mm13'3"4527 mm14'10"
Lift Arm Clearance at Maximum Lift3280 mm10'9"3634 mm11'11"
Rack Back at Maximum Lift59 degrees56 degrees
Rack Back at Carry Height46 degrees49 degrees
Rack Back at Ground38 degrees42 degrees
Maximum Width over Tires (loaded)2822 mm9'4"2822 mm9'4"
Tread Width2140 mm7'0"2140 mm7'0"
• All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3
radial tires.
With Cooling Fan Speed at Maximum Value:
Operator Sound Pressure Level (ISO 6396:2008)
Exterior Sound Power Level (ISO 6395:2008)
Exterior Sound Pressure Level (SAE J88:2013)
With Cooling Fan Speed at 70% of Maximum Value:**
Operator Sound Pressure Level (ISO 6396:2008)
Exterior Sound Power Level (ISO 6395:2008)
69 dB(A)
104 L
WA
***
70 dB(A)
107 dB(A)
75 dB(A)*
*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
** For machines in countries that adopt the “EU Directives.”
*** European Union Directive “2000/14/EC” as amended by “2005/88/EC.”
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at
© 2016 Caterpillar
All rights reserved
Materials and specifi cations are subject to change without notice. Featured machines in photos may include additional equipment.
See your Cat dealer for available options.
CAT, CATERPILLAR, , their respective logos, “Caterpillar Yellow” and the “Power Edge” trade dress, as well as
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
VisionLink is a trademark of Trimble Navigation Limited, registered in the United States and in other countries.
AEXQ1745 (03-2016)
2024年10月28日发(作者：斯永康)
Cat 950M
®
Wheel Loader
The new 950M Wheel Loader has an ACERT™ engine equipped with a combination of proven electronic, fuel, and air components.
Applying proven technologies systematically and strategically lets us meet our customers’ high expectations for productivity, fuel
effi ciency, reliability and service life. Deep system integration results in reduced emissions, improved performance and improved
fuel economy without interrupting machine performance making it seamless to operators. Optional confi gurations are available.**
RELIABILITY, PRODUCTIVITY AND FUEL EFFICIENCY
• 10% more fuel effi cient than K Series*
• Up to 25% more effi cient than H Series*
EASE OF OPERATION
Best-in-class Operator Environment
• Optimized all-around visibility
• Steering wheel (E-H joystick steering option)
• Touch screen multifunction color display with integrated controls
and rearview camera
• Stair-like ingress and egress
• New wider door and increased glass area
• Seat-mounted fi ngertip electro-hydraulic implement controls
• Large convex rearview mirrors with integrated spot mirror
• Remote door opening (option)
• Automatic climate control
• Viscous cab mounts
• Low operator sound levels
Linkage and Work Tools
• Performance Series buckets and range of work tools
• Optimized Z-bar with best-in-class visibility
• –0°/+5° parallelism
• Increased tilt capacity at height, equal to payload
• Fusion™ « zero-offset » coupler (option)
Engine and Aftertreatment Advancements
• Cat
®
C7.1 ACERT
• Meets U.S. EPA Tier 3/EU Stage IIIA equivalent emissions standards
• Productive Economy Mode
Transmission Advancements
• 5-speed powershift transmission with single clutch speed shifts
and torque based down shifts
• Lock up clutch torque converter with lock-to-lock shifting
• Split fl ow oil system and multi-viscosity oil
Advanced Technology with Cat Connect
• Link technologies, like Product Link™ to monitor equipment and
manage production using online VisionLink
®
software
• Payload technologies, like Cat Production Measurement (option)
to measure payloads and optimize productivity
• Detect technologies, like the rear vision camera to keep people safe
and help the operator work more productively
Axle Advancements
• On-the-go disc-type front differential locks
(front and rear fully automatic option)
• Caliper disc parking brake
• Bevel gear shrouds
SERVICE ACCESS
• One-piece tilting hood with side and rear doors
• Centralized service centers for hydraulic and electrical components
• Windshield cleaning platform and harness tie-off
* Fuel effi ciency is measured in mass of material moved per volume of fuel
burned. Average effi ciency improvement as tested and analyzed for an
average composite cycle and stand confi guration with variations per
comparable model with and without economy mode active. Factors infl uence
result variation such as, but not limited to, machine confi guration, operator
technique, machine application, climate, etc.
** Optional confi guration and equipment may vary from region to region.
Consult your Caterpillar representative for further details.
Next Generation Hydraulic Systems
• Next generation main valve
• Next generation ride control system with dual accumulators
• Next generation implement pump with increased displacement
• Full fl ow and kidney loop fi ltration
• Load-sensing hydraulics with simultaneous hydraulic functions
• 3rd and 4th function (option)
Cat
®
950M Wheel Loader
Engine Model
Max Gross Power @ 2,000 rpm – SAE J1995
Max Gross Power @ 2,000 rpm – ISO 14396
Max Gross Power @ 2,000 rpm – ISO 14396 (metric)
Max Net Power @ 2,000 rpm – SAE J1349
Max Net Power @ 2,000 rpm – ISO 9249
Max Net Power @ 2,000 rpm – ISO 9249 (metric)
Peak Gross Torque (1,400 rpm) – SAE J1995
Peak Gross Torque (1,400 rpm) – ISO 14396
Maximum Net Torque (1,400 rpm)
Displacement
Cat C7.1 ACERT
196 kW263 hp
195 kW261 hp
265 hp
185 kW248 hp
185 kW248 hp
252 hp
1053 N·m777 lbf-ft
1050 N·m774 lbf-ft
984 N·m726 lbf-ft
7.01 L428 in3
Static Tipping Load – Full 40° Turn –
with Tire Defl ection
Static Tipping Load – Full 40° Turn –
No Tire Defl ection
Breakout Force
11 005 kg
11 760 kg
181 kN
24,262 lb
25,926 lb
40,690 lbf
• For a machine confi guration as defi ned under “Weight.”
• Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires
2% verifi cation between calculations and testing.
Fuel Tank
Cooling System
Crankcase
Transmission
Differentials and Final Drives – Front
Differentials and Final Drives – Rear
Hydraulic Tank
275 L
59 L
22 L
43 L
43 L
43 L
125 L
72.6 gal
15.6 gal
5.8 gal
11.4 gal
11.4 gal
11.4 gal
33.0 gal
Operating Weight19 214 kg42,360 lb
• Weight based on a machine confi guration with Michelin 23.5R25 XHA2
L3 radial tires, full fl uids, operator, standard counterweight, cold start,
roading fenders, Product Link, manual diff lock/open axles (front/rear),
power train guard, secondary steering, sound suppression and a 3.1 m3
(4.1 yd3) general purpose bucket with BOCE.
Implement Pump Type
Implement System:
Maximum Pump Output (2,150 rpm)
Maximum Operating Pressure
Hydraulic Cycle Time – Total
Variable Axial Piston
286 L/min76 gal/min
29 300 kPa4,250 psi
9.1 Seconds
Bucket Range2.5-9.2 m³3.3-12.0 yd³
Forward 16.9 km/h4.3 mph
Forward 212 km/h7.5 mph
Forward 319.3 km/h12.0 mph
Forward 425.7 km/h16.0 mph
Forward 539.5 km/h24.5 mph
Reverse 16.9 km/h4.3 mph
Reverse 212 km/h7.5 mph
Reverse 325.7 km/h16.0 mph
• Maximum travel speed in standard vehicle with empty bucket and
standard L3 tires with 787 mm (31 in) roll radius.
Standard Lift
Height to Top of Hood2697 mm8'10"
High Lift
2697 mm8'10"
Height to Top of Exhaust Pipe3413 mm11'2"3413 mm11'2"
Height to Top of ROPS3446 mm11'4"3446 mm11'4"
Ground Clearance367 mm 1'2"367 mm1'2"
Center Line of Rear Axle to Edge
1942 mm6'4"2071 mm6'10"
of Counterweight
Center Line of Rear Axle to Hitch1675 mm5'6"1675 mm5'6"
Wheelbase3350 mm11'0"3350 mm11'0"
Overall Length (without bucket)6906 mm22'8"7488 mm24'7"
Hinge Pin Height at Carry Height647 mm2'1"782 mm2'7"
Hinge Pin Height at Maximum Lift4027 mm13'3"4527 mm14'10"
Lift Arm Clearance at Maximum Lift3280 mm10'9"3634 mm11'11"
Rack Back at Maximum Lift59 degrees56 degrees
Rack Back at Carry Height46 degrees49 degrees
Rack Back at Ground38 degrees42 degrees
Maximum Width over Tires (loaded)2822 mm9'4"2822 mm9'4"
Tread Width2140 mm7'0"2140 mm7'0"
• All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3
radial tires.
With Cooling Fan Speed at Maximum Value:
Operator Sound Pressure Level (ISO 6396:2008)
Exterior Sound Power Level (ISO 6395:2008)
Exterior Sound Pressure Level (SAE J88:2013)
With Cooling Fan Speed at 70% of Maximum Value:**
Operator Sound Pressure Level (ISO 6396:2008)
Exterior Sound Power Level (ISO 6395:2008)
69 dB(A)
104 L
WA
***
70 dB(A)
107 dB(A)
75 dB(A)*
*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
** For machines in countries that adopt the “EU Directives.”
*** European Union Directive “2000/14/EC” as amended by “2005/88/EC.”
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at
© 2016 Caterpillar
All rights reserved
Materials and specifi cations are subject to change without notice. Featured machines in photos may include additional equipment.
See your Cat dealer for available options.
CAT, CATERPILLAR, , their respective logos, “Caterpillar Yellow” and the “Power Edge” trade dress, as well as
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
VisionLink is a trademark of Trimble Navigation Limited, registered in the United States and in other countries.
AEXQ1745 (03-2016)