2024年4月9日发(作者：盈敏才)
Specification
Formaldehyde requirements of
wood-based materials and products
Signature Authorised by
Spec. no:
Date:
Version no:
IOS-MAT-0003
2009-10-09
AA-10899-9
Replaces:
Issued by
Björn Frithiof
Product Requirements &
Compliance/
Laws & Standards
Anders Gårlin
IKEA of Sweden/
Deputy Manager
Signature
AA-10899-8
Formaldehyde requirements of
wood-based materials and products
Contents
This specification describes the IKEA formaldehyde requirements of wood-based
1
materials and
products, indicating formaldehyde concentration/emission limits as well as test, documentation and
Quality Assurance requirements.
About this specification
The purpose of this specification is to describe the IKEA requirements for limitations of formaldehyde in
products made of wood-based materials. These requirements aim to ensure that:
•
•
IKEA products do not cause our customers any irritation or health problems due to formaldehyde.
IKEA products with a safe margin fulfil legal requirements and customer expectations in all of our
sales countries.
The specification applies to wood-based
1
materials as well as to foils, paper, edge-bands and veneer
attached to these by glue or adhesive, and to processes for attaching these (and for attaching wood).
Table of contents
1
Requirements on materials .2
1.1
2
1.2
Overall documentation 2
1.3
Content of test reports/2
1.4
Possible additional verification of compliance in 3
2
Limits and 3
2.1
.3
2.2
Requirements for materials and products produced and sold in 8
2.3
Requirements for Build-in products to be sold 8
2.4
Implementation dates for 10
2.5
Sampling 10
2.5.1
Handling 10
2.5.2
10
2.5.3
Mill 11
3
11
4
Definitions and additional information 11
Appendix 1: Supplementary description of documents related to .17
Appendix 2: Test methods and limits for testing final products or materials of final products (produced
according to tables 2.1.A-F or table 2.3.A)........................................................................................................18
Appendix 3: Documentation, marking and 19
1
Particleboard and dry process fibreboard (MDF, HDF, LMDF) made of any cellulosic materials are also
covered by this specification.
© IKEA of Sweden AB • 2009 Page 1 (39)
.
Specification
Formaldehyde requirements of
wood-based materials and products
Spec. no:
Date:
Version no:
IOS-MAT-0003
2009-10-09
AA-10899-9
1
1.1
Requirements on materials and products
Overall requirements
Each individual and combined material of a product shall separately comply with the limit value of the
relevant test method according to section 2.1, 2.2 or 2.3 respectively.
All products and materials shall comply with the demands in section 2.1, except:
• Particleboard, Dry process fibreboard (MDF, HDF, LMDF) and Plywood where the final product
is produced and sold within North America shall comply either with section 2.2 or with section 2.1.
• For Japan, all build-in products shall comply with section 2.3, as stated in the Technical Description
(TED).
1.2 Overall documentation and archiving
On request from IKEA, the supplier shall, by the next working day, be able to present the required docu-
mentation (in English or with English translation attached) for the materials used in IKEA products.
Documents required to be handed over to IKEA shall be entered in the IKEA Connect Database.
2
• When registering the documents in Connect all documents for materials listed in Table 2.1.A part 1
shall be classified with document content description as
“IOS-MAT-0003 (AA10899-9), 2.1.A part 1, <
P2, ULEF, NAF, or PS1 ).The General Statement of Compliance shall be classified with an additional
Document Content Description: “IOS-MAT-0003 (AA10899-9) 2.1.A part 1, General Statement of
Compliance”
•
•
Documents for other material and for processes shall refer to this specification and to the table
which they state compliance with, e.g. “IOS-MAT-0003-9” and “Table 2.1.B”.
Documents for the component as a whole or for the product as a whole shall be entered as
“IOS-MAT-0003-9”and “section [2.1, 2.2 or 2.3]”.
Exception: until the IKEA supplier has received training in ‘Connect’, the required documents shall be
retained by the IKEA supplier for at least 15 years from the date of delivery to IKEA unless otherwise
stated in TED. The documents shall in this case be accompanied by a supplementary description showing
how the documents relate to the article. This description shall use a form as per Appendix 1 and contain:
• Supplier’s name and number and concerned IKEA products and date stamps
• List of materials used in the products and reference to documentation for these materials.
Production test results are to be retained for minimum 4 years.
1.3 Content of test report and self declaration
Test reports and self declarations shall state:
• Holder of the test report and self declaration (company name and address).
• Issuer of the test report (an IKEA approved laboratory) or self declaration (normally the material
producer).
• For test report: test method and, when relevant, the sampling procedure used, and test result.
• Statement regarding formaldehyde level, e.g. test result, or statement that formaldehyde has not
been used or added.
• Scope of the report, e.g. valid for a production date or a production batch/consignment (including
sample identification). For formaldehyde-free materials the scope of the statement can be a specific
material or product quality.
2
IKEA archive for quality-verifying documents.
© IKEA of Sweden AB • 2009 Page 2 (39)
.
2024年4月9日发(作者：盈敏才)
Specification
Formaldehyde requirements of
wood-based materials and products
Signature Authorised by
Spec. no:
Date:
Version no:
IOS-MAT-0003
2009-10-09
AA-10899-9
Replaces:
Issued by
Björn Frithiof
Product Requirements &
Compliance/
Laws & Standards
Anders Gårlin
IKEA of Sweden/
Deputy Manager
Signature
AA-10899-8
Formaldehyde requirements of
wood-based materials and products
Contents
This specification describes the IKEA formaldehyde requirements of wood-based
1
materials and
products, indicating formaldehyde concentration/emission limits as well as test, documentation and
Quality Assurance requirements.
About this specification
The purpose of this specification is to describe the IKEA requirements for limitations of formaldehyde in
products made of wood-based materials. These requirements aim to ensure that:
•
•
IKEA products do not cause our customers any irritation or health problems due to formaldehyde.
IKEA products with a safe margin fulfil legal requirements and customer expectations in all of our
sales countries.
The specification applies to wood-based
1
materials as well as to foils, paper, edge-bands and veneer
attached to these by glue or adhesive, and to processes for attaching these (and for attaching wood).
Table of contents
1
Requirements on materials .2
1.1
2
1.2
Overall documentation 2
1.3
Content of test reports/2
1.4
Possible additional verification of compliance in 3
2
Limits and 3
2.1
.3
2.2
Requirements for materials and products produced and sold in 8
2.3
Requirements for Build-in products to be sold 8
2.4
Implementation dates for 10
2.5
Sampling 10
2.5.1
Handling 10
2.5.2
10
2.5.3
Mill 11
3
11
4
Definitions and additional information 11
Appendix 1: Supplementary description of documents related to .17
Appendix 2: Test methods and limits for testing final products or materials of final products (produced
according to tables 2.1.A-F or table 2.3.A)........................................................................................................18
Appendix 3: Documentation, marking and 19
1
Particleboard and dry process fibreboard (MDF, HDF, LMDF) made of any cellulosic materials are also
covered by this specification.
© IKEA of Sweden AB • 2009 Page 1 (39)
.
Specification
Formaldehyde requirements of
wood-based materials and products
Spec. no:
Date:
Version no:
IOS-MAT-0003
2009-10-09
AA-10899-9
1
1.1
Requirements on materials and products
Overall requirements
Each individual and combined material of a product shall separately comply with the limit value of the
relevant test method according to section 2.1, 2.2 or 2.3 respectively.
All products and materials shall comply with the demands in section 2.1, except:
• Particleboard, Dry process fibreboard (MDF, HDF, LMDF) and Plywood where the final product
is produced and sold within North America shall comply either with section 2.2 or with section 2.1.
• For Japan, all build-in products shall comply with section 2.3, as stated in the Technical Description
(TED).
1.2 Overall documentation and archiving
On request from IKEA, the supplier shall, by the next working day, be able to present the required docu-
mentation (in English or with English translation attached) for the materials used in IKEA products.
Documents required to be handed over to IKEA shall be entered in the IKEA Connect Database.
2
• When registering the documents in Connect all documents for materials listed in Table 2.1.A part 1
shall be classified with document content description as
“IOS-MAT-0003 (AA10899-9), 2.1.A part 1, <
P2, ULEF, NAF, or PS1 ).The General Statement of Compliance shall be classified with an additional
Document Content Description: “IOS-MAT-0003 (AA10899-9) 2.1.A part 1, General Statement of
Compliance”
•
•
Documents for other material and for processes shall refer to this specification and to the table
which they state compliance with, e.g. “IOS-MAT-0003-9” and “Table 2.1.B”.
Documents for the component as a whole or for the product as a whole shall be entered as
“IOS-MAT-0003-9”and “section [2.1, 2.2 or 2.3]”.
Exception: until the IKEA supplier has received training in ‘Connect’, the required documents shall be
retained by the IKEA supplier for at least 15 years from the date of delivery to IKEA unless otherwise
stated in TED. The documents shall in this case be accompanied by a supplementary description showing
how the documents relate to the article. This description shall use a form as per Appendix 1 and contain:
• Supplier’s name and number and concerned IKEA products and date stamps
• List of materials used in the products and reference to documentation for these materials.
Production test results are to be retained for minimum 4 years.
1.3 Content of test report and self declaration
Test reports and self declarations shall state:
• Holder of the test report and self declaration (company name and address).
• Issuer of the test report (an IKEA approved laboratory) or self declaration (normally the material
producer).
• For test report: test method and, when relevant, the sampling procedure used, and test result.
• Statement regarding formaldehyde level, e.g. test result, or statement that formaldehyde has not
been used or added.
• Scope of the report, e.g. valid for a production date or a production batch/consignment (including
sample identification). For formaldehyde-free materials the scope of the statement can be a specific
material or product quality.
2
IKEA archive for quality-verifying documents.
© IKEA of Sweden AB • 2009 Page 2 (39)
.